含三氟甲基聚酰亚胺的合成与性能研究

通过在4,4′-二氨基二苯醚(4,4-′ODA)单体中引入三氟甲基合成了一种新型二胺单体2-三氟甲基-4,4′-二氨基二苯醚(3FODA),该单体具有良好的溶解性和高的反应活性,使用3FODA替代4,4′-二氨基二苯甲烷(MDA)制备了PMR热固性聚酰亚胺树脂.树脂溶液高浓度低粘度,具有室温下良好的储存稳定性;树脂具有很好的加工性能,成型后的模压件显示了优异的热性能和耐热氧化稳定性,玻璃化转变温度在336~379℃之间;此外树脂具有较好的电性能和较低的吸水率.     

4-苯乙炔苯酐封端聚酰亚胺树脂的合成与性能研究

使用3,3′,4,4′-二苯醚四酸二酐(ODPA)、3,3′,4,4′-联苯四酸二酐(BPDA)、1,3-双(4-氨基苯氧基)苯(1,3,4-APB)、3,4′-二氨基二苯醚(3,4′-ODA)和反应性封端剂4-苯乙炔苯酐(4-PEPA)合成了设计分子量为5000的系列苯乙炔基封端的聚酰亚胺低聚物,并使用XRD、DSC、TGA、FT-IR、DMA和流变仪等对低聚物的化学结构、热性能和熔体性能,固化后树脂的热性能和力学性能进行了测试.研究结果表明基于ODPA的低聚物具有低的熔体粘度和良好的熔体粘度稳定性,固化后的树脂具有很高的热失重温度,较高的玻璃化转变温度以及良好的力学性能尤其是高的断裂伸长率(>10%);基于BPDA的低聚物具有一定的结晶性,其结晶熔融温度与苯乙炔基固化交联温度相近,影响了材料的成型工艺性能.     

Pd2(dba)3/BINAP催化合成[4,4′-(4,4′-二苯亚胺基)二苯甲酰胺基]二苯醚

在三乙胺催化下,4-溴苯甲酰氯与4,4′-二氨基二苯醚反应制得[4,4 ′-(4,4′-二溴)-二苯甲酰胺基]二苯醚(1);1与苯胺在Pd2 (dba) 3/BINAP催化下合成了新化合物——[4,4′-(4,4′-二苯亚胺基)二苯甲酰胺基]二苯醚,其结构经1 H NMR和FT-IR表征.     

4-苯乙炔基苯胺封端聚酰亚胺树脂的合成与性能研究

使用4-苯乙炔基苯胺(4-PEA)作为反应性封端剂,和3,3′,4,4′-二苯醚四酸二酐(ODPA),3,3′,4,4′-联苯四酸二酐(BPDA),1,4-双(4′-氨基-2′-三氟甲基苯氧基)苯(BTPB)和3,4′-二氨基二苯醚(3,4-′ODA)反应合成了系列4-苯乙炔基苯基封端的聚酰亚胺低聚物,对低聚物的化学结构、热性能和熔体粘度以及固化后树脂的热性能等进行了研究.实验结果表明,低聚物均具有一定的结晶性,含有ODPA的聚酰亚胺低聚物较之含有BPDA的低聚物具有更低的熔体粘度,且出现最低熔体粘度的温度更低;固化后的树脂表现出良好的热性能,含有BPDA的树脂具有更高的玻璃化转变温度;系列低聚物中二胺单体的比例对于低聚物的熔体粘度和固化后树脂的热稳定性有一定影响.     

可溶性共聚型聚苯并咪唑的合成及性能

以对苯二酚和对氟苯甲腈为原料, 合成了1,4-二(4-羧基苯氧基)苯, 并与4,4′-二羧基二苯醚作为共聚单体与3,3′-二氨基联苯胺反应合成了共聚型聚苯并咪唑, 通过红外光谱、核磁共振和热重分析等手段对聚合物的结构及热性能进行了分析. 研究了聚合物的黏度、溶解性、成膜性及聚合物薄膜的力学性能.     

双酚F型聚酰亚胺的合成及其性能表征

以苯酚和甲醛为原料,合成了双酚F(BPF)和双酚F二酐(BPFDA),用BPFDA分别和间苯二胺(m-PDA)、4,4'-二氨基二苯醚(4,4'-ODA)、1,4-(4-氨基苯氧基)苯(TPEQ)反应,得到了3种双酚F型聚酰亚胺,分别对其结构、溶解性、热性能和力学性能进行了表征.结果表明:聚合物的比浓对数黏度为0.5～...     

含有吡啶环的可溶型聚苯并咪唑共聚物的合成及表征

采用溶液缩聚法合成了不同摩尔比的3,3′-二氨基联苯二胺(DAB)、2,3,5,6-四氨基吡啶(TAP)盐酸盐和4,4′-二羧基二苯醚(DCDPE)的共聚物。用红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)、热重分析(TGA)以及电子拉力机对聚合物的结构和性能进行了表征。结果表明:共聚反应中,当TAP在两种胺类单体中的摩尔分数分别为0.1、0.2、0.3时,30℃的特性黏度对应为0.806、0.8161、.028 dL/g。共聚物在N,N-二甲基酰胺(DMF)、二甲基亚砜(DMSO)、N-甲基-2-吡咯烷酮(NMP)等极性溶剂和浓H2SO4中有良好的溶解性。3种单体可以在短时间内形成共聚产物,产物具有良好的成膜性、热稳定性和力学性能。     

基于苯醚型含氟二胺的聚酰亚胺膜材料的合成与表征

4,4′-二羟基二苯醚和2-氯-5-硝基三氟甲苯经Williamson反应得到4,4′-双(4-硝基-2-三氟甲基苯氧基)二苯醚;在Pd/C-水合肼还原作用下得到4,4′-双(4-氨基-2-三氟甲基苯氧基)二苯醚(p-6FAPE).采用3种苯醚型含氟二胺1,4-双(3-氨基-5-三氟甲基苯氧基)苯、1,4-双(4-氨基-2-三氟甲基苯氧基)苯和p-6FAPE分别与3,3′,4,4′-二苯醚四酸二酐(ODPA)和均苯四甲酸二酐通过两步法制备出6种含氟聚酰亚胺(PI),对其溶解性、热性能和光学性能进行研究.这些PI具有较好的溶解性,且具有良好的热稳定性;ODPA基PI在可见光波长范围具有优良的透明性,450 nm处的透光率超过80%.     

3,5-二氨基苯甲酸-4′-联苯酯及含液晶侧链的聚酰亚胺的合成与表征

合成了含液晶基元侧基的二氨基化合物——— 3,5 二氨基苯甲酸 4′ 联苯酯 ,并以 3,3′ 4,4′ 二苯醚四羧酸二酐 (ODPA)、二氨基二苯醚 (ODA)为共聚单体 ,制备了具有液晶侧链原位复合自增强功能的新型聚酰亚胺 (PI)薄膜材料 .这种含液晶基元侧链的PI能溶解在极性非质子有机溶剂中 ,显示出良好的可加工性能 .由于液晶基元侧链的原位复合自增强作用 ,该类膜材料显示出良好的力学性能和热稳定性能在热台偏光显微镜下观察 ,该类聚合物在较高的温度区域内显示液晶行为 ,并呈现向列相织构     

4,4‘—二苯醚二甲酸的新合成路线

4,4′-二苯醚二甲酸(以下简称醚酸)是一种重要的高聚物单体,用于制备合成树脂、绝缘材料和液晶纤维等,在国防工业和民用工业上有着宽广的前途。但国内至今尚无醚酸产品。醚酸的合成路线归纳起来有两大类:一类是以4,4′-二甲基二苯醚为原料,将甲基氧化成羧基。另一类是以二苯醚为原料,接上相应的基团,再转化成羧基。二苯醚类则由酚和卤苯经 Ullmann 缩合反应制得。由于反应需要200℃以上的高温,长时间加热,因而产品质量     

高分子金属络合物的性能及应用进展

介绍了高分子金属络合物的种类及合成。综述了高分子金属络合物不同于低分子络合物的催化性能、电学性能、光学性能和磁性 ,以及高分子金属络合物作为催化剂、光学材料、电学材料等方面的应用进展。     

聚苯胺电致变色薄膜在不同颜色区间的电化学循环稳定性研究

本文采用电位阶跃和循环伏安法结合紫外可见光光度法研究了聚苯胺薄膜的电致变色性质. 聚苯胺薄膜颜色多变,颜色在浅黄色到绿色再到蓝色之间变化,本文研究在不同的颜色变化区间内聚苯胺薄膜的电化学循环稳定性. 研究结果表明,薄膜在黄色到蓝色(0.4 V ~ 1.2 V)以及绿色到蓝色(0.8 V ~ 1.2 V)区间变化时,电致变色循环性能较差,而在黄色和绿色(0.4 V ~ 0.8 V)之间变化时循环稳定性能良好,着色时间为4.5 s,着色效率高达159.48 cm²·C^-1.     

铜-铈氧化还原液流电池性能

设计了一种新型Ce-Cu氧化-还原液流电池,研究了Ce³⁺/Ce⁴⁺和Cu⁰/Cu²⁺氧化还原电对的循环伏安特性,优化了电解液及电极材料,进而组装出液流电池,测试了电池的充放电性能。 结果表明,在45 mA恒电流充/放电条件下,电池放电平台电压约为1.0 V,库伦效率约100%,能量效率为75%以上,电池可稳定循环100次。     

反相高效液相色谱法对八种吡嗪类化合物保留性能的研究

在Ｓｐｈｅｒｉｓｏｒｂ－Ｃ（１８）反相柱上,以甲醇－水为流动相,对八种吡嗪类化合物的保留性能进行了考察。同时用不同浓度下的冲洗剂所得保留值和关系式ｌｎｋ＇＝ａ＋ｃＣｂ中的参数ａ、ｃ作线性关系,得到很好的相关性。流动相中不同的无机盐及微量有机胺类改性剂的加入,可有效地改进分离。当甲醇：０．２ｍｌ／ＬＨＡｃ－ＮａＡｃ缓冲液（ｐＨ４．５）：三乙胺为４０：５９：１（Ｖ／Ｖ）时,除两种同分异构体不能分离外,所有组分在２５ｍｉｎ内可实现较理想的分离。     

Research Progress in the Field of Adsorption and Catalytic Degradation of Sewage by Hydrotalcite‐Derived Materials

With the rapid development of industry and agriculture and the greatly improved living conditions, the resultant gradually deteriorated environments threaten the human beings. Refractory or even toxic pollutants, which are from different industries such as printing and dyeing, pesticides, chemicals, petrochemicals, plastics and rubber, seriously threat the ecosystems and human health. Having the advantages of flexible composition, unique structure, high stability, memory effect, easy preparation and low cost, hydrotalcite compounds have a great potential in sewage degradation and environmental protection. This study focuses on the adsorption and catalytic properties (such as photocatalysis, electrocatalysis and photoelectrocatalysis) of hydrotalcite‐derived materials for treating organic, inorganic and heavy metal ion sewage. The types of adsorption and catalysis, and the effects of various influencing factors on the degradation efficiency were discussed as well.     

含氟硅油的合成及其消抑泡性能

三氟丙基硅油;水相体系;油相体系;消泡性能;抑泡性能     

Effect of graphene nanosheet addition on the electrochemical performance of anode materials for lithium-ion batteries

The structure and electronic properties of graphene nanosheet (GNS) render it a promising conducting agent in a lithium-ion battery. A graphite electrode loaded with GNS exhibits superior electrochemical properties including higher rate performance, increased specific capacity and better cycle performance compared with that obtained by adding the traditional conducting agent–acetylene black. The high-quality sp² carbon lattice, quasi-two-dimensional crystal structure and high aspect ratio of GNS provide the basis for a continuous conducting network to counter the decrease in electrode conductivity with increasing number of cycles, and guarantee efficient and fast electronic transport throughout the anode. Effects of GNS loading content on the electrochemical properties of graphite electrode are investigated and results indicate that the amount of conductive additives needed is decreased by using GNS. The kinetics and mechanism of lithium-storage for a GNS-loaded electrode are explored using a series of electrochemical testing techniques.     

溶剂热法控制合成规则的LiFePO4颗粒

采用溶剂热法在H2O和异丙醇的混合溶剂中合成橄榄石结构的磷酸铁锂(LiFePO4). 场发射扫描电镜(FESEM)结果表明, LiFePO4产品的形貌与导电添加剂密切相关, 当改变导电添加剂的种类(蔗糖、碳黑和石墨)时, 分别得到了棒状和方块状的LiFePO4颗粒. TEM和选区电子衍射(SAED)的结果表明, 棒状的LiFePO4晶体沿着[201]方向取向生长. 取向机理可能在于添加剂对晶体生长的吸附阻止作用. 充放电测试表明, 溶剂热法合成的LiFePO4(添加蔗糖)具有145.2 mAh·g-1的可逆容量和良好的循环保持能力, 且表现出优良的倍率放电性能和高温特性, 其4C放电容量为98.1 mAh·g-1, 保持了0.1C容量的67.6%, 且放电电压平台仍保持在3.12 V(vs Li/Li+).     

The mosaic structure design to improve the anchoring strength of SiOx@C@Graphite anode

Silicon oxide (SiO_x)-based anodes have aroused great interest as the most promising alternative anode in the practical application of high-performance lithium-ion batteries. However, the electrochemical performance is inhibited because of the large volume change, and the electrode structure deteriorates during the cycling process, which hinders their practical application. In this article, a novel fabrication method for the synthesis of high-performance SiO_x@C@Graphite composites is presented. SiO_x particles are anchored on the graphite surface by chemical vapor deposition and compression molding. This structure makes up the shortcomings of poor electrical conductivity and poor bonding strength between SiO_x and graphite particles. It is beneficial to form a stable solid electrolyte interface and helps to maintain the structural integrity of electrode materials. As a result, the synthetic SiO_x@C@Graphite anode shows a high reversible capacity (2698.8 mA h), excellent cycle stability (about 76.9% capacity retention for 500 cycles) and a superior rate ability. Our research hopes to provide a new idea for improving the bonding strength of the surface coating.     

The metallic 1T-WS2 as cocatalysts for promoting photocatalytic N2 fixation performance of Bi5O7Br nanosheets

Recently, widespread attention has been devoted to the typical layered BiOCl or BiOBr because of the suitable nanostructure and band structure. However, owing to the fast carrier recombination, the photocatalytic performance of BiOX materials is not so satisfactory. Loading 1T phase WS₂ nanosheets (NSs) onto Bi₅O₇Br NSs can improve the photocatalytic N₂ fixation activity. Among these, the obtained 1T-WS₂@Bi₅O₇Br composites with optimum 5% 1T-WS₂ NSs display a significantly improved photocatalytic N₂ fixation rate (8.43 mmol L⁻¹ h⁻¹ g⁻¹), 2.51 times higher than pure Bi₅O₇Br (3.36 mmol L⁻¹ h⁻¹ g⁻¹). And the outstanding stability of 1T-WS₂@Bi₅O₇Br-5 composites is also achieved. Exactly, the photoexcited electrons from Bi₅O₇Br NSs are quickly transferred to conductive 1T phase WS₂ as electron acceptors, which can promote the separation of carriers. In addition, 1T-WS₂ NSs can provide abundant active sites on the basal and edge planes, which can promote the efficiency of photocatalytic N₂ fixation. This work offers a novel solution to improve the photocatalytic performance of Bi₅O₇Br NSs.