噻吩-咔唑-苯衍生物的设计、合成及电致变色性质

以苯和二联苯单元为核,分别在其1,4位和4,4'(对位)引入噻吩-咔唑单元,设计合成了9,9'-(1,4-亚苯基)双[3,6-双(2-噻吩)]-9-氢-咔唑(BTCPh)和9,9'-[1,1'-联苯基]-4,4'-二取代基双[3,6-双(2-噻吩)]-9-氢-咔唑(BTCBPh)2种化合物;再通过电化学聚合得到相应的交联结构聚合物,分别为聚9,9'-(1,4-亚苯基)双[3,6-双(2-噻吩)]-9-氢-咔唑(p BTCPh)和聚9,9'-[1,1'-联苯基]-4,4'-二取代基双[3,6-双(2-噻吩)]-9-氢-咔唑(p BTCBPh)薄膜.利用循环伏安法(CV)、多电位阶跃、紫外-可见-近红外(UV-Vis-NIR)吸收光谱和扫描电子显微镜(SEM)等手段对其进行了表征与电化学性能测试.结果表明,2种聚合物均表现出良好的电化学性质、相似的颜色变化、较高的光学对比度及电化学循环稳定性等优异的电致变色性质.p BTCPh聚合物薄膜比p BTCBPh表现出更快的响应速度,这可能是由于前者具有更加均匀规整的堆积结构,有利于变色过程中的离子嵌入与脱出所致.     

新型基于二氟苯并噻二唑和双噻吩丙烯腈共轭聚合物的设计、合成及光伏性能

设计并合成了两种基于5,6-二氟苯并噻二唑和双噻吩丙烯腈单元的D-A型共轭聚合物,聚[(5,6-二氟-苯[c][1,2,5]噻二唑-4,7-基)-交替-((E)-2,3-双(3'-(2-辛基十二烷基)-(2,2'-双噻吩)-5,5'-基)丙烯腈)](DFBT812)和聚[(5,6-二氟-苯[c][1,2,5]噻二唑-4,7-基)-交替-((E)-2,3-双(3'-(2-癸基十四烷基)-(2,2'-双噻吩)-5,5'-基)丙烯腈)](DFBT1014)作为聚合物太阳电池的给体材料。通过侧链工程,引入了2-辛基十二烷基和2-癸基十四烷基侧链实现对聚合物的溶解性,结晶性以及共混膜形貌的调节。研究结果表明,共轭聚合物DFBT812与PC_(61)BM的共混膜表现出更好的相分离尺度,能够促进载流子的传输和抽取。基于共轭聚合物DFBT812的太阳电池器件取得了0.87 V的开路电压和6.25%的能量转换效率。除此之外,基于DFBT812的聚合物太阳电池器件在活性层厚度为220 nm时仍然表现出6%的能量转换效率。     

小分子优先结晶构筑聚合物/非富勒烯共混体系互穿网络结构

非富勒烯小分子受体(SMAs)有序聚集决定聚合物/非富勒烯共混体系光伏电池的双分子复合几率。 然而,由于非对称相分离聚合物趋于优先形成网络,抑制小分子受体分子结晶。 在聚[(2,6-(4,8-二(5-(2-乙基己基噻吩-2-基)苯并[1,2-b:4,5-b']二噻吩))-alt-(5,5-(1',3'-二-2-噻吩基-5',7'-二(2-乙基己基)苯并[1',2'-c:4',5'-c']二噻吩-4,8-二酮))](PBDB-T)/9-二(2-亚甲基(3-(1,1-二氰基亚甲基)-6,7-二氟-茚酮))-5,5,11,11-四(4-己基苯基)-二噻吩并[2,3-d:2',3'-d']-s-引达省[1,2-b:5,6-b']二噻吩(IT-4F)共混体系,四氢呋喃蒸汽处理可提高IT-4F结晶性,150 ℃热退火可提高PBDB-T的结晶性。 因此,依次利用蒸汽退火和热退火处理薄膜,诱导小分子先结晶、聚合物后结晶,从而降低PBDB-T对小分子扩散的限制,构建高结晶互穿网络结构。 形貌优化后降低了双分子复合,器件光电转换效率从5.95%提高至7.18%。     

基于含氟异靛蓝的硼氮配位键高分子电子受体

采用含氟异靛蓝单元(fIID)和硼氮配位键桥联噻吩联噻唑单元(BNTT)交替共聚制备了高分子电子受体,聚(N,N'-双(2-庚基十二烷基)-含氟异靛蓝-co-双苯基硼氮配位键桥联噻吩联噻唑)(P-BN-fIID)。采用理论计算、紫外-可见吸收光谱、循环伏安测试以及掠入射X射线衍射等研究了材料的结构与性质的关系,并制备了全高分子太阳能电池器件,研究了其光伏性能。结果表明:与基于异靛蓝单元(IID)的高分子聚(N,N'-双(2-己基辛基)-异靛蓝-co-双苯基硼氮配位键桥联噻吩联噻唑)(P-BN-IID)相比较,含有氟原子的P-BN-fIID的最低未占据分子轨道能级(ELUMO)降低了0.1 eV,吸收光谱红移了25 nm;同时,P-BN-fIID的结晶性明显提高,具有相对紧密的堆积结构和较高的电子迁移率。采用经典的高分子给体聚(2-烷硫基噻吩取代的二维共轭苯并二噻吩-co-噻吩桥联苯并三氮唑)(J61)与P-BN-fIID共混组装的全高分子太阳能电池器件,其能量转化效率(PCE)为2.83%。说明氟原子可以有效调节高分子受体的光电性质和结晶性,高分子受体的结晶行为明显影响全高分子太阳能电池的器件性能。     

D-π-A型共轭聚合物的合成及其光伏性能

设计合成了3种主链相同、侧基不同的Donor(D)-π-Acceptor(A)型共轭聚合物:聚[(4,8-二辛氧基苯[1,2-b;3,4-b]二噻吩)-(9-(4-氰基苯基)-9H-咔唑)](PBDTCz-CN)、聚[(4,8-二辛氧基苯[1,2-b;3,4-b′]二噻吩)-(9-(4-醛基苯基)-9H-咔唑)](PBDTCz-CHO)和聚[(4,8-二辛氧基苯[1,2-b;3,4-b]二噻吩)-(9-(4-硝基苯基)-9H-咔唑)](PBDTCz-NO_2)。通过调变侧基上的受体基团,比较了氰基、醛基、硝基对聚合物光学和电学性能的影响,讨论了影响聚合物光电转换效率的主要因素。3种聚合物的光学带隙和线性吸收系数依次分别为2.32 eV,152.0 L/(g·cm);2.43 eV,58.5 L/(g·cm)和2.25 eV,85.5 L/(g·cm)。在这些聚合物中,彼此间的最高占据分子轨道(HOMO)能级差距很小,PBDTCz-NO_2的最低未占据分子轨道(LUMO)能级最低(-3.38eV)。在100 W/m~2模拟太阳光的照射下,基于这些聚合物的光伏器件(器件结构:ITO/PEDOT:PSS/Polymer:[70]PCBM(1:2)/Ca/A1)的光电转换效率分别为0.44%(PBDTCz-CN)、0.001 8%(PBDTCz-CHO)和0.23%(PBDTCz-NO_2)。低的光电转换效率主要归因于低的短路电流,而影响短路电流的主要原因有自身吸光性能的限制和弱的π-π堆砌作用。     

采用聚合物基质材料的热激活延迟荧光及其敏化器件

报道了基于热激活延迟荧光材料2, 4, 5, 6-四(9-咔唑基)-间苯二腈(4CzIPN),聚合物聚(9-乙烯基咔唑)(PVK)和小分子材料2, 2'-(1, 3-苯基)二[5-(4-叔丁基苯基)-1, 3, 4-噁二唑](OXD-7)为共主体材料的发光器件,器件的外量子效率达到13%;进一步研究4CzIPN敏化5, 6, 11, 12-四苯基并四苯(Rubrene)的器件,外量子效率达到9.2%,为未掺杂4CzIPN器件的5.4倍。通过瞬态光谱测量证实敏化器件的发光机制为F?rster能量转移,并探讨了Rubrene浓度和载流子平衡对器件发光特性的影响,推测Rubrene自聚集是限制敏化器件效率的内在原因。     

两种新型双极有机小分子发光材料的合成与发光

设计和合成了两种新的具有“双极(bipolar)”性质和发光性能的有机小分子化合物N-[4-(5-(2-苯基喹啉-4)-1,3,4-噁二唑-2)苯基]-N'-苯基-N,N'-二苯基-1,1'-联苯基-4,4'-二胺(TPDOPQ)和N,N'-双{4-[5-(2-苯基喹啉-4-基)-1,3,4-噁二唑-2]苯基}-N,N'-二苯基-1,1'-联苯基-4,4'-二胺[TPD(OPQ)₂]. 用¹H NMR, MS和元素分析进行了表征, 研究了化合物的热稳定性和光致发光性质, 并用循环伏安法测定了其电化学性能. 结果表明, 这两种合成的有机化合物同时具备空穴传导和电子输入双重功能, 光致发光性能优良, 热稳定性好, 能形成均衡薄膜, 因此可作为制作有机电致发光器件的候选材料.     

柔性配体构筑的三个构象多样的镧系羧酸配位聚合物:合成,结构和荧光性质（英文）

利用2,2'-(1,4-亚苯基)二(亚苯基)二(硫基)苯二羧酸(H_2L~1)和2,2'-(2,3,5,6-四甲基-1,4-亚苯基)二(亚甲基)二(硫基)苯二甲酸(H_2L~2)2个柔性二羧酸分別与镧系金属盐反应,通过溶剂热方法合成了3个配位聚合物:{[(NH_2(CH_3)_2[Nd(L~1)_2(DMF)]·2DMF}_n(1)和{[Ln(L~2)_(1.5)(H_2O)(DMF)_2]·2DMF}_n[Ln=Ce(2),Pr(3)]。利用元素分析、红外、粉末X射线衍射、热重分析等对配合物进行了表征。X射线单晶衍射分析表明:3个配合物均为二维的层状结构,并且2个配体在配合物中表现出不同的构象。(L~1)~(2-)在配合物1中表现出顺式和反式2种构象,(L~2)~(2-)在配合物2和3中仅表现出反式构象。此外,对配合物的热稳定性和荧光性质也进行了研究。     

新型联苯基三苯胺聚合物的合成与性能研究

以4,4'-二溴联苯和苯胺为原料,经钯催化氨基化反应制得N,N'-二苯基联苯胺(1);以1为单体,分别与对二溴苯(2a),4,4'-二溴二苯砜(2b)和4,4'-二溴二苯甲酮(2c)通过钯催化的C-N交叉偶联反应,合成了3个新型的联苯基三苯胺聚合物:联苯基三苯胺苯(3a,收率88%),联苯基三苯胺砜(3b,收率94%)和联苯基三苯胺酮(3c,收率91%),其结构经1H NMR,IR和XRD表征。采用UV-Vis,TG,DSC,荧光光谱和循环伏安法对3a~3c的性能进行了研究。结果表明:3a~3c失重5%的温度分别为479℃,482℃和355℃;玻璃化转变温度分别为199℃,248℃和215℃;λmax分别位于354 nm,359 nm和385 nm;λem分别为489 nm,472 nm和518 nm;EHOMO值分别为-3.96 eV,-3.89 eV,-3.94 eV;ELUMO值分别为-1.16 eV,-1.17 eV和-1.39 eV。     

可溶性窄带隙芴-噻吩共轭齐聚物的合成与表征

设计并合成了新型可溶性芴-噻吩共轭齐聚物FT6CE,对该化合物的热性质、光物理性质和电化学性质进行了详细表征.以FT6CE为给体,(6,6)-苯基-C61-丁酸甲酯(PC61BM)为受体,用溶液旋涂方法制备了体异质结太阳能电池器件,发现采用体积比为2∶1的氯仿/氯苯混合溶剂制备的器件性能最好,能量转换效率达到2.15%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.