Thiacalix[4]arene derivatives as radium ionophores: a study on the requirements for Ra2+ extraction

The synthesis and NOE-based structural characterization is described of thiacalix[4]arene tricarboxylic acid (7), thiacalix[4]crown-5 and -6 monocarboxylic acids (2 and 5), and the bis(N-methylsulfonyl)thiacalix[4]crowns-5 and -6 (4a,b). The 226Ra2+ selectivity coefficients, log(K(Ra)ex/K(M)ex), of the new thiacalix[4]arene derivatives are compared directly with those of thiacalix[4]crown-5 and -6 (1a,b), thiacalix[4]crown-5 and -6 dicarboxylic acids (3a,b), and thiacalix[4]arene di- and tetracarboxylic acids (6 and 8). Thiacalix[4]arene dicarboxylic acid (6) already exhibits a high 226Ra2+ selectivity, but this is significantly improved in the case of 3b, having an additional crown-(6-)ether bridge. The covalent combination of a crown ether and carboxylic acid substituents as in the thiacalix[4]arenes 2,3a,b,4a,b, and 5 gives a better 226Ra2+ selectivity in the presence of Sr2+ or Ba2+ than mixtures of dibenzo-21-crown-7 and thiacalix[4]arene dicarboxylic acid (6) or of pentadecanoic acid and thiacalix[4]crown-6 (1b).     

Rapid metal ions shuttling through 1,3-alternate Thiacalix[4]crown tubes

Several new thiacalix[4]monocrown and thiacalix[4]biscrown compounds were synthesized. Their metal ion extractabilities are found to be lower than those of conventional calix[4]crowns. By use of X-ray crystal structures and (1)H NMR spectroscopy, this result is explained by weaker electrostatic interactions of the polyether ring oxygen atoms with the metal ions and diminished pi-metal ion interactions between the metal ions and the aromatic rings of the thiacalix[4]crowns. Temperature-dependent (1)H NMR spectroscopic measurements reveal coalescence temperatures T(c)(intra) and T(c)(inter) for metal ion exchange. In one case, this exchange was rationalized as metal ion shuttling through a thiacalix[4]biscrown tube. Since the metal ions are less tightly complexed by the polyether units in thiacalix[4]biscrowns than in conventional calix[4]biscrowns, more facile metal ion exchange between the two polyether units takes place in the former.     

Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Cation control on the synthesis of p-t-butylthiacalix[4](bis)crown ethers

Bridging of p-t-butylthiacalix[4]arene with ethylene glycol ditosylates gave diametrically bridged thiacalix[4]monocrowns-4 and -5, 1,2-alternate thiacalix[4]biscrowns-4 and -5 and 1,3-alternate thiacalix[4]biscrown-5, dependent on the metal carbonate used. They show excellent extraction ability towards Ag⁺ cations.     

硫杂杯[4]芳烃酰胺基硫脲衍生物的合成

硫杂杯[4]芳烃四乙酸乙酯衍生物与水合肼反应生成硫杂杯[4]芳烃四酰肼衍生物(3),3与异硫氰酸苯酯反应得到新型硫杂杯[4]芳烃酰胺基硫脲衍生物,总产率61%。     

Anion receptors based on ureido-substituted thiacalix[4]arenes and calix[4]arenes

The regioselective nitration of 25,27-dipropoxythiacalix[4]arene was carried out as a key step in the synthesis of thiacalix[4]arene derivative bearing two arylureido functions on the upper rim. The preorganisation of ureido units using the thiacalix[4]arene/calix[4]arene moieties as a molecular scaffold gave novel anion receptors. These compounds, albeit based on hydrogen bonding interactions, show good complexation ability even in highly HB-competitive solvent, such as DMSO. Direct comparison of otherwise identical structures 6a and 7a revealed remarkable dominance of the thiacalix[4]arene derivative over its classical analogue in anion binding.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

Unique self-assembly patterns based on thiacalix[4]arene-silver interactions

Novel self-assembled supramolecular networks were prepared by the interactions of thiacalix[4]arenes bearing simple alkyl groups on the lower rim (4×MeO-, 4×n-PrO-) with silver triflate. Contrary to the classical calix[4]arenes (with CH₂ bridges between the aromatic moieties), the presence of four sulfur atoms enables the formation of S-Ag-S connections between the individual molecules leading to the coordination topology so far unknown in calixarene chemistry. These systems form infinite 1-D coordination polymeric structures in the solid state, where the thiacalixarene moieties are preorganized in a side-by-side arrangement. Interestingly, the linear coordination polymers were obtained using both the conformational immobilised (4×n-PrO, cone, 1,3-alternate conformers) and the conformational mobile (4×MeO) thiacalix[4]arenes, which indicates the generality of this behaviour in thiacalixarene series.     

Synthesis and Electrochemical Behavior of Electroactive Bistetrathiafulvalene-attached Thiacalix[4]arene Assemblies

Tetrabromoalkylthiacalix[4]arenes(1a and 1b) reacted with excess bis(tetraethylammonium)-bis(1,3- dithiole-2-thione-4,5-dithiol)zincate(2) to give thiacalix[4]arene-thiones(3a and 3b) in the presence of Na₂S. Two novel bistetrathiafulvalene-attached thiacalix[4]arene assemblies(5a and 5b) formed via triethyl phosphite-mediated cross-coupling of thiacalix[4]arene-thiones(3a and 3b) and 4,5-biscyanoethylthio-1,3-dithiole-2-one(4). All the four new compounds were characterized by ¹H NMR, ¹³C NMR, IR, MS spectra and elemental analysis. Meanwhile, the structures of thiacalix[4]arene-thiones(3a and 3b) were identified by X-ray analysis. In addition, the cyclic voltammograms of the resulting thiacalix[4]arenes containing electroactive TTF units(5a and 5b) were provided.     

S-alkylation of thiacalixarenes: a long-neglected possibility in the calixarene family

Despite the high nucleophilicity of sulfur atoms, thiacalixarenes have been alkylated only on oxygen atoms thus far. Using strong alkylating agents (triflates, trialkyloxonium salts), the substitution of the sulfur bridges has been successfully accomplished. The corresponding sulfonium salts of thiacalix[4]arene are formed regio- and stereoselectively as a completely new type of substitution pattern in thiacalixarene chemistry. These compounds possess interesting conformational behavior and could be used as unusual alkylating agents with uncommon selectivity.     

Novel dendritic cores based on thiacalix[4]arene derivatives

Thiacalix[4]arenes possessing carboxylic groups were used for the design of potential dendritic cores with amino surface groups. The known tetraacetic acid in the 1,3-alternate conformation gave the desired product in very low yield because of steric hindrance on thiacalix[4]arene moiety. Therefore, synthetic strategy based on withdrawing of the carboxyl groups via benzylic spacer from the thiacalix[4]arene moiety was successfully applied for the realization of novel thiacalix[4]arenes bearing two or four protected lysine units.     

Comparative analysis of the binding of thiacalix[4]arene-monocrown-ethers with monovalent metal salts using MALDI mass spectrometry

MALDI mass spectrometry is used for the first time for the rapid assessment of the binding of thiacalix[4]arene-monocrown-ethers with metal cations (Li, Na, K, Cs, Cu, Ag). The work is performed on examples of thiacalix[4]arene-monocrown-ethers in 1,3-alternate conformation with various numbers (m) of ethylene oxide units and various substituents in phenol groups. It is shown that thiacalix[4]arene-monocrown- ethers with m = 3, 4, 5, and 6 bind lithium, sodium, potassium, and cesium cations, respectively; in addition, the binding of cesium cations is stronger in the presence of aromatic substituents in the lower rim of thiacalix[4]arene-monocrown-ethers. Silver cations bind with calixarenes under study more intensely than copper ions. When aromatic substituents are present, the binding of silver cations is stronger than that of alkali metal ions with the studied thiacalix[4]arene-monocrown-ethers.     

含苯并噁唑基的硫桥杯[4]芳烃衍生物的合成及结构

在碳酸钾存在下, 对叔丁基硫桥杯[4]芳烃(1)分别与端基二溴代烷和碘甲烷反应, 生成硫桥杯[4]芳烃衍生物2～4. 含端基溴代的硫桥杯[4]芳烃衍生物2和4分别与2-巯基苯并噁唑在碳酸钾存在下反应, 生成硫桥杯[4]芳烃衍生物5a～5d. 通过1H NMR, 13C NMR, IR, MS和元素分析等手段对产物进行了表征. 同时, X射线分析确定了硫桥杯[4]芳烃5b的晶体结构.     

苄连氮桥联双硫杂杯[4]芳烃的合成

硫杂杯[4]二醛基衍生物(1)在水合肼中肼解,合成了新化合物硫杂杯[4]二醛腙基衍生物(2);1和2在弱酸的催化下反应合成了新的具有对称结构的苄连氮双硫杂杯[4]芳烃(3);2和3的结构经1H NMR,IR,ESI-MS和元素分析表征.     

Silver ion shuttling in the trimer-mimic thiacalix[4]crown tube

Novel 1,3-alternate calix-thiacalix[4]crown trimers bearing crown-5 and crown-6 were prepared. As proven by X-ray diffraction, in a 1:2 mole ratio of ligand to metal ion, the Cs(+) and K(+) ions prefer to be encapsulated in the trimeric thiacalix[4]crown-6 and crown-5, respectively. On the contrary, the Ag(+) ion was found to be entrapped in the central thiacalix spacer as a 1:1 complex confirmed by (1)H NMR spectrosocpy. Variable-temperature (1)H NMR studies for the trimeric thiacalix[4]crown-6 encapsulating the silver ion revealed that the Ag(+) ion oscillates through the central thiacalix spacer with the aid of cation-pi interactions.     

Supramolecular assembly based on π-π stacking and π-cation interactions between thiacalix[6]arene and DMF

The molecular assembly of thiacalix[6]arene was formed by π-π stacking and π-DMF interactions between thiacalix[6]arene and adjoining thiacalix[6]arene and between thiacalix[6]arene and DMF, respectively. The X-ray crystal analysis also revealed that hydroxyl groups of thiacalix[6]arene adopted novel two sets of hydrogen bond with two DMF and intramolecular hydrogen bond between phenolic units, which cause to make 1,2,3-alternate configuration structure of thiacalix[6]arene.     

含噻二唑官能基的对叔丁基硫桥杯[4]芳烃衍生物的合成及结构

以对叔丁基硫桥杯[4]芳烃(1)为原料, 在碳酸钾存在下与碘甲烷反应, 生成1,3-二取代桥杯[4]芳烃(2), 其分别与1,2-二溴乙烷, 1,3-二溴丙烷在碳酸钾的存在下进行烷基化反应, 生成硫桥杯[4]芳烃衍生物3和4. 在氢氧化钠存在下,其与过量的含不同官能团的2-巯基-1,3,4-噻二唑反应, 生成下缘含1,3,4-噻二唑基的硫桥杯[4]芳烃衍生物5a, 5b, 6a和6b, 并通过了¹H NMR, ¹³C NMR, IR, MS和元素分析的确证. 同时, X射线分析确定了硫桥杯[4]芳烃3和5a的晶体结构.     

Conformational behaviour of tetramethoxythiacalix[4]arenes: solution versus solid-state study

The conformational behaviour of simple thiacalix[4]arene derivatives was studied using a combination of NMR spectroscopy and X-ray diffraction analysis. The 25,26,27,28-tetramethoxythiacalix[4]arene was found to adopt an unprecedented solid-state structure, where the cone and 1,3-alternate conformers co-exist in the crystal lattice in the 3:1 ratio. This phenomenon reflects the basically distinct conformational behaviour of thiacalix[4]arene skeleton as compared with classical calixarenes.     

Thiacalix[4]arene derivatives with proximally bridged lower rim

New types of lower rim proximally bridged thiacalix[4]arenes have been prepared by direct aminolysis of starting tetraacetate derivative in the cone conformation using aliphatic α,ω-diamines. X-ray crystallography revealed the highly preorganized array of -C(O)NH- bonds resulting in strong intramolecular hydrogen bonding between amide groups of both bridges. The length of the corresponding diamine was found to have an essential influence on the yield of these bridged molecules.     

Comparative study on the transition metal complexes of a novel thiacalix[4]arene derivative

A comparative study on Zn²⁺ and Cu²⁺ complexes of the novel compound 5,11,17,23-tetra-tert-butyl-25,27-bis{[4-(methoxycarbonyl)phenyl]methoxy}-2,8,14,20-tetrathiacalix[4]arene, that possesses potential as a core unit for the construction of molecular receptors, is presented using semiempirical AM1 calculation. The possible structures of each metal complex and their corresponding energetic data are compared with the parent 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene. The complexation ability of both thiacalix[4]arenes towards the two metal ions is discussed on the basis of binding energies. Both thiacalix[4]arene 1:1 complexes show higher complexation ability towards Cu²⁺. However, 5,11,17,23-tetra-tert-butyl-25,27-bis{[4-(methoxycarbonyl)phenyl]methoxy}-2,8,14,20-tetrathiacalix[4]arene presents lower complexation ability when compared with the 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene. The results of liquid–liquid extraction experiments of the thiacalix[4]arenes are in good agreement with the theoretical calculations.