Pulsed TV holography and tomography for the study of transient waves in air

Transient waves in air are recorded and reconstructed using pulsed TV holography and computerized tomography (CT). Experiments are performed with an electrical discharge between two electrodes as the acoustic wave source. The free space wave-fronts and pressure fields are reconstructed. Waves reflected and diffracted by different obstacles are also recorded and reconstructed in three dimensions. Speckle averaging and image processing techniques are used to get the high quality projection fields needed for CT reconstruction.     

Four-pulse interferometric recordings of transient events by pulsed TV holography

With traditional double-pulsed holographic interferometry or pulsed TV holography, the experiment usually has to be repeated to allow the recording of a time sequence of interferograms of the event. With the proposed technique a sequence of four interferograms of a solitary transient event is measured. A twin oscillator, injection-seeded, pulsed Nd:YAG laser is incorporated into a pulsed TV holography set-up. With orthogonal polarisation and double pulsing of each of the two channels of the laser, four pulses are recorded on two separate CCD-frames. Four interferograms of a laser-impacted plate obtained from the same experiment, show how the bending waves develop and propagate in the plate.     

Elastic constants determination by direct measurement of the beat wavelength between A0 and S0 Lamb modes with pulsed TV holography

A whole-field optical technique of high sensitivity, namely pulsed TV holography with phase evaluation by the Spatial Fourier Transform Method, is applied to the acquisition of instantaneous displacement fields of ultrasonic Lamb waves in aluminium plates a few millimetres thick. Two Lamb modes, the A0 and S0 ones, are simultaneously generated in the plate, producing a clear beating. Several values of the beat wavelength, corresponding to different excitation frequencies, are obtained by direct measurement of the distance between nodes in the wave field. The obtained values are fitted to the theoretical Rayleigh–Lamb frequency spectrum in order to determine the elastic constants of the plate material. We conclude that it is necessary to know the value of another parameter to univocally solve the problem, and so the bulk longitudinal wave velocity is measured by the pulse-echo method. Then the Poisson's ratio is obtained and, from these two parameters, the Young's modulus can also be determined.     

Combination of schlieren and pulsed TV holography in the study of a high-speed flame jet

This paper presents studies of the propagation of a high-speed turbulent flame jet of an air/hydrogen gas mixture. The experimental results are recorded with the schlieren and the pulsed TV holography method. These methods are compared and combined to benefit from the advantages of each of them. Abel inversion has been used to achieve three-dimensional information i.e. refractive index distributions. Evaluation, calibration and Abel inversion algorithms are described together with experimental results. The results obtained from the different techniques show remarkable similarities concerning both qualitative and quantitative aspects.     

Axial acoustic radiation force of progressive cylindrical diverging waves on a rigid and a soft cylinder immersed in an ideal compressible fluid

Background and motivation

Previous works investigating the radiation force of diverging spherical progressive waves incident upon spherical particles have demonstrated the direction of reversal of the force when the particle is subjected to a curved wave-front. In this communication, the analysis is extended to the case of diverging cylindrical progressive waves incident upon a rigid or a soft cylinder in a non-viscous fluid with explicit calculations for the radiation force function (which is the radiation force per unit energy density and unit cross-sectional surface) not shown in [F.G. Mitri, Ultrasonics 50 (2010) 620-627].

Method

A closed-form solution presented previously in [F.G. Mitri, Ultrasonics 50 (2010) 620-627] is used to plot the radiation force function with particular emphasis on the difference from the results of incident plane progressive waves versus the size parameter ka (k is the wave number and a is the cylinder’s radius) and the distance of the cylinder from the acoustic source r₀.

Results

Radiation force function calculations for the rigid cylinder unexpectedly reveal that under specific conditions determined by the frequency of the acoustic field, the radius of the cylinder, as well as the distance to the acoustic source, the force becomes attractive (negative force). In addition, the numerical results show that the radiation force on a rigid cylinder does not generally obey the inverse-distance law with respect to the distance from the source.

Conclusion and potential applications

These results suggest that it may be possible, under specific conditions, to pull a cylindrical structure back toward the acoustic source using progressive cylindrical diverging waves. They may also provide a means to predict the radiation force required to manipulate non-destructively a single cylindrical structure. Potential applications include the design of a new generation of acoustic tweezers operating using a single beam of progressive waves (in contrast to the traditional version of acoustical tweezers in which an acoustic standing wave field is produced using two counter-propagating acoustic fields) for investigations in the field of flow cytometry, particle manipulation and entrapment.     

Combined effect of acoustic cavitation and pulsed discharge plasma on wastewater treatment efficiency in a circulating reactor: A case study of Rhodamine B

The present study investigates the wastewater treatment performance of an acoustic cavitation assisted plasma (ACAP) process in a circulating reactor using Rhodamine B (RhB) as a model water pollution. The concept of this process was proposed by the authors recently for a batch type rector. The measurements revealed that combining the ultrasound irradiation with pulsed discharge plasma allows the RhB degradation efficiency to be drastically increased as compared with the plasma-alone case. This effect is especially significant at higher values of solution electrical conductivity examined in a range of 20 ~ 400 μS/cm. Acidic conditions and larger flow rates of solution were found to be favorable for the degradation efficiency. The effect of flow rate was also analyzed through numerical simulation. The results indicated that the mass transfer of RhB to the plasma-cavitation zone is one of the controlling parameters influencing the degradation performance. Behavior of bubbles and pulse discharge frequency were examined using a high-speed video camera. Relatively large bubbles were found to favor the plasma pulse generation and propagation when move near the high-voltage electrode. On the whole, the results of this study suggest that the ACAP process has the potential to synergistically extend the application area of underwater plasma in both research and industry.