Label-free microcantilever-based immunosensors for highly sensitive determination of avian influenza virus H9

We report on label-free immunosensors for the highly sensitive detection of avian influenza virus. The method makes use of the microcantilevers of an atomic force microscope onto which monoclonal antibodies against avian influenza virus were covalently immobilized. The factors influencing the performance of the resulting immunosensors were optimized by measuring the deflections of the cantilever via optical reflection, and this resulted in low detection limits and a wide analytical range. The differential deflection signals revealed specific antigen binding and their intensity is proportional to the logarithm of the concentrations of the virus in solution. Under optimal conditions, the immunosensors exhibit a linear response in the 7.6 ng mL^?1 to 76 μg mL^?1 concentration range of avian influenza virus, and the detection limit is 1.9 ng mL^?1.

Nanocomposites composed of layered molybdenum disulfide and graphene for highly sensitive amperometric determination of methyl parathion

The authors describe an inexpensive electrode for the sensitive amperometric determination of the pesticide methyl parathion. A glassy carbon electrode was modified with a nanocomposite consisting of molybdenum disulfide nanosheets (MoS2) and graphene that was prepared via a hydrothermal process. Its morphology, elemental composition, diffraction, impedance and voltammetric characteristics were studied. The modified electrode displays excellent electrocatalytic ability towards methyl parathion, and the reduction peak current, measured typically at ?0.60 V (vs. Ag/AgCl) is related to the concentration of methyl parathion. The effect of concentration, scan rate and solution pH value were optimized. The calibration plot is linear in the 10 nM to 1.9 mM concentration range, with a 3.2 nM detection limit (at a signal-to-noise ratio of 3). The electrode is selective, stable, adequately repeatable and reproducible. The method was successfully applied to the determination of methyl parathion in spiked samples of homogenized apple, kiwi, tomato and cabbage.

Open image in new window

Graphical Abstract A reliable and robust methyl parathion sensor has been developed using heterostructured MoS₂/graphene. The linear range is 10 nM–1.9 nM and detection limit is 3.2 (±0.8) nM. The method was successful in real sample determination of spiked methyl parathion in food samples such as apple, kiwi, tomato and cabbage.

     

Production of antibodies and development of highly sensitive formats of enzyme immunoassay for saxitoxin analysis

In this paper the production of antibodies against saxitoxin (STX) is described, as is the optimization and comparison of two competitive ELISA formats (direct and indirect) for the detection of this toxin. Tests were performed in a 96-well microplate using the toxin-specific polyclonal antibodies produced in our laboratory, obtained from rabbits immunized with saxitoxin-keyhole limpet hemocyanin (STX-KLH). In indirect ELISA format saxitoxin, conjugated to bovine serum albumin (STX-BSA) was coated onto the microtitre plate and incubated with standard toxin and anti-STX antibody. A goat anti-rabbit IgG Peroxidase conjugate was used to enable detection. In the direct ELISA format, STX standard, STX conjugate to horseradish peroxidase (STX-HRP), and enzyme substrate/chromogen solution were sequentially added to the microplate after antibody coating.Results showed the saxitoxin detection limit to be 3 and 10 pg mL(-1) for direct and indirect ELISA formats, respectively.The suitability of the assay for quantification of saxitoxin in mussels was also studied. Samples were spiked with saxitoxin before and after sample treatment to study the extraction efficiency and matrix effect, respectively. After treatment, samples were analysed at 1:1000 v/v dilution in PBS to minimize the matrix effect and to detect the regulatory limit of 40-80 micro g saxitoxin per 100 g mussels as stipulated by the Food and Drug Administration. The efficiency of extraction of saxitoxin was from 72 to 102%. These data were confirmed by liquid chromatography coupled with fluorimetric detection, the technique currently used for quantitative determination of toxins in seafood.     

Label-free capacitive immunosensors for ultra-trace detection based on the increase of immobilized antibodies on silver nanoparticles

Detection of ultra-trace amounts of antigens by label-free capacitive immunosensors was investigated using electrodes modified with silver nanoparticles (AgNPs) that allows for an increase in the amount of immobilized antibodies. The optimal amount of AgNPs that provided the highest immobilization yield was 48 pmol (in 2.0 mL). The performances of immunosensor electrodes for human serum albumin prepared with AgNPs, were compared to electrodes prepared with gold nanoparticles. The two systems provided the same linear range (1.0 × 10⁻¹⁸ to 1.0 × 10⁻¹⁰ M) and detection limit (1.0 × 10⁻¹⁸ M). The system with AgNPs was used to analyze albumin in urine samples and the results agreed well with the immunoturbidimetric assay (P > 0.05). Electrodes modified with AgNPs and appropriate antibodies were tested for their performances to detect analytes of different sizes. For a macromolecule (human serum albumin) the incorporation of AgNPs improved the detection limit from 100 to 1 aM. For small molecules, microcystin-LR and penicillin G, the detection limits were lowered from 100 and 10 fM to 10 and 0.7 fM, respectively. The high sensitivity and very low detection limits are potentially useful for the analysis of toxins or residues present in samples at ultra-trace levels and this method could easily be applied to other affinity pairs.     

Tungsten disulfide nanosheet and exonuclease III co-assisted amplification strategy for highly sensitive fluorescence polarization detection of DNA glycosylase activity

Herein, we introduced a tungsten disulfide (WS₂) nanosheet and exonuclease III (Exo III) co-assisted signal amplification strategy for highly sensitive fluorescent polarization (FP) assay of DNA glycosylase activity. Two DNA glycosylases, uracil-DNA glycosylase (UDG) and human 8-oxoG DNA glycosylase 1 (hOGG1), were tested. A hairpin-structured probe (HP) which contained damaged bases in the stem was used as the substrate. The removal of damaged bases from substrate by DNA glycosylase would lower the melting temperature of HP. The HP was then opened and hybridized with a FAM dye-labeled single strand DNA (DP), generating a duplex with a recessed 3′-terminal of DP. This design facilitated the Exo III-assisted amplification by repeating the hybridization and digestion of DP, liberating numerous FAM fluorophores which could not be adsorbed on WS₂ nanosheet. Thus, the final system exhibited a small FP signal. However, in the absence of DNA glycosylases, no hybridization between DP and HP was occurred, hampering the hydrolysis of DP by Exo III. The intact DP was then adsorbed on the surface of WS₂ nanosheet that greatly amplified the mass of the labeled-FAM fluorophore, resulting in a large FP value. With the co-assisted amplification strategy, the sensitivity was substantially improved. In addition, this method was applied to detect UDG activity in cell extracts. The study of the inhibition of UDG was also performed. Furthermore, this method is simple in design, easy in implementation, and selective, which holds potential applications in the DNA glycosylase related mechanism research and molecular diagnostics.     

A nanocomposite containing Prussian Blue,platinum nanoparticles and polyaniline for multi-amplification of the signal of voltammetric immunosensors: highly sensitive detection of carcinoma antigen 125

The authors describe a method for signal amplification of label-free voltammetric immunosensors. A glassy carbon electrode (GCE) was modified with Prussian Blue-platinum nanoparticles (PB-PtNPs) as a redox-active species that gives a strong amperometric signal at 0.18 V (vs. Ag/AgCl). Benefitting from the excellent electrical conductivity and the strong catalytic activity to H₂O₂, the modified GCE gives a strongly enhanced signal. The PB-PtNPs were incorporated into a polyaniline (PANI) hydrogel to further enhance the signal. The signal response of the PB-PtNP-PANI/GCE is larger by a factor of 7.6 than that of PB-PtNP/GCE. In order to further improve electrical conductivity and immobilize antibody, gold nanoparticles (AuNPs) were deposited on the surface of the PB-PtNP-PANI hydrogel. The AuNP-PB-PtNP-PANI hydrogel nanocomposite on the GCE was used in an immunosensor for the model analyte carcinoma antigen 125 (CA125), a biomarker for epithelial ovarian cancer, by immobilizing the respective antibody on the modified GCE. A linear response found for the 0.01 to 5000 U mL^?1 CA125 concentration range, with a detection limit of 4.4 mU mL^?1 (at an S/N ratio of 3). The electrochemical sensitivity is as high as 119.76 μA·(U/mL)^?1·cm^?2. The detection of CA125 in human serum showed satisfactory accuracy compared to a commercial chemiluminescent microparticle immunoassay (CMIA).

Open image in new window

Graphical abstract Schematic of a nanocomposites consisting of gold nanoparticles, Prussian Blue, platinum nanoparticles and polyaniline hydrogel as a signal multi-amplification sensing substrate for the ultrasensitive immuno detection of carcinoma antigen 125 (CA125).

     

Screen-printed electrodes as impedimetric immunosensors for the detection of anti-transglutaminase antibodies in human sera

The concentration of anti-transglutaminase antibodies in human sera is an important analytical marker for the diagnosis of the autoimmune disorder celiac disease. In this work, an immunosensor for the electrochemical detection of anti-transglutaminase antibodies in human sera was developed. The immunosensor is based on the immobilization of transglutaminase onto screen-printed gold electrodes which were covered with a polyelectrolyte layer of poly (sodium-4-styrensulfonic acid). The antigen-antibody interaction was evaluated using an amplification step: incubation with peroxidase (POD)-labeled immunoglobulins and subsequent biocatalytic oxidation of 3-amino-9-ethylcarbazole (AEC). Changes in the interfacial properties of the sensor electrode were determined by electrochemical impedance spectroscopy (EIS). Impedance spectra could be fitted to a Randles equivalent circuit containing a constant phase element (CPE). Furthermore, it was shown that impedance measurements could be simplified by performing EIS at only two selected frequencies, without loss of reliability. Incubation of these disposable immunosensor chips with various anti-transglutaminase antibody concentrations resulted in changes in their charge transfer resistance (R_ct). Thereby, a calibration graph could be established. Finally, immunosensors were used for characterizing different human sera with respect to their anti-transglutaminase autoantibody concentration of the IgG and IgA type.     

A highly sensitive and selective chemosensor for cyanide

A highly sensitive and selective cyanide chemosensor based on fused indoline and benzooxazine fragment was reported with fast response. The detection of cyanide was performed via the nucleophilic attack of cyanide anion on the oxazine. (1)H NMR and MS studies confirmed the cleavage of C-O bond of oxazine and binding of cyanide to the spiro center of oxazine. The specific reaction results in high selectivity for cyanide ion. Addition of cyanide anion to the oxazine in MeCN/H(2)O solution results in a loss in absorbance at 343 nm and an increase in new absorbance at 411 nm, thus resulting in obvious color changes. Cyanide can be detected down to 1 microM levels in a fast response of less than 30s with no interference of other anionic species. The cyanide detection method should have potential application in a variety of settings requiring rapid and accurate analysis of cyanide anion for drinking and fresh water.     

Development of highly selective and sensitive probes for hydrogen

Probes that react specifically with hydrogen peroxide to release chromophoric or fluorescent reporter groups were designed and synthesized.     

Development of a highly sensitive inhibition immunoassay for microcystin-LR

The development of a rapid one-step antigen-immobilized inhibition ELISA for microcystin-LR is described. For microplate coating a microcystin-biotin conjugate was synthesized. Using the commercially available monoclonal antibody MC10E7 in our newly established assay, IC₅₀ values of 0.045 μg l⁻¹ have been achieved. The detection limit for microcystin-LR was 4 ng l⁻¹. Considering the guidelines proposed by the world health organization (WHO) for microcystin-LR in drinking water (1 μg l⁻¹) the sensitivity of our test is more than sufficient. The period of assay processing could successfully be shortened to about 3 h without any loss in sensitivity. The suitability of the newly developed assay was evaluated with microcystin-LR spiked environmental water samples. Recovery rates for microcystin-LR between 60 and 165% were obtained in the linear range of the test format. The antigen-immobilized test format provides a highly reproducible, easy, and fast to perform detection system for microcystin allowing an internal retrospective quality control of the assay.     

Rich-defect carbon nanotubes for highly sensitive detection of Dopamine

Dopamine (DA) plays an essential role in the central nervous, renal, hormonal and cardiovascular systems. Various modified carbon nanotubes (CNT)-based dopamine sensors have been reported, but inexpensive, highly sensitive plain CNT-based ones are seldom studied. In this work, a facile and inexpensive CNT-based DA sensor is made by rich-defect multi-walled carbon nanotubes (RD-CNT) via an ultrasound method. The defect and elemental states of the RD-CNT are systematically studied by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), Raman spectroscopy, X-ray powder diffraction (XRD) and X-ray-photoelectron spectroscopy (XPS). Results show that massive holes and cracks exist in RD-CNT. The level of defects increases from the additional exposed edges. The electrochemical characterizations indicate that the electrochemical sensor has the highest sensitivity of 438.4 μA/(μM ⋅ cm²) among all carbon materials-based DA sensors while well meeting the clinically required detection range and selectivity. The DA sensor was further used to detect live healthy human serum and live PC12 cells with satisfactory results, thus holding great promise for an inexpensive but sensitive DA sensor in practical applications of clinical diagnosis and biological research.     

Biosensors based on highly sensitive acetylcholinesterases for enhanced carbamate insecticides detection

This paper presents the construction of amperometric biosensors for the highly sensitive detection of carbamate insecticides based on the inhibition of acetylcholinesterase (AChE). This enzyme was immobilised by entrapment in an optimised sol-gel matrix on TCNQ-modified screen-printed electrodes. The enzyme activity was estimated by measuring the thiocholine produced by the enzymatic hydrolysis of the acetylthiocholine using TCNQ as mediator. Wild and genetically engineered AChEs from Drosophila melanogaster (Dm) were chosen for their high sensitivity towards insecticides, which substantially improves the LOD compared with cholinesterases from other sources. The wild type and three mutant enzymes were tested against three carbamate insecticides: carbaryl, carbofuran and pirimicard. The best LOD were obtained with the Y370A mutant for carbaryl (1 × 10⁻⁸ M), the E69W mutant for pirimicarb (2 × 10⁻⁸ M) and the I161V mutant for carbofuran (8 × 10⁻¹⁰ M). The biosensors were applied to the analysis of two potable water samples.     

Metastable state nanoparticle-enhanced Raman spectroscopy for highly sensitive detection

Metastable state silver nanoparticle surface-enhanced Raman scattering has been experimentally and theoretically demonstrated; the signal is two to three orders of magnitude higher than that for the traditional method. Ultrasensitive surface-enhanced Raman scattering signals of illicit drug cocaine and organophosphate pesticide methyl-parathion were observed.     

A highly sensitive electrochemical assay for microRNA expression profiling

A simple and highly sensitive electrochemical assay for ligation-free and polymerase chain reaction (PCR)-free microRNA (miRNA) expression profiling is described in this work. The electrode used in the assay was made of a monolayer of stem-looped capture probes (CPs) comprising of a miRNA complementing region at one end and detection probes (DPs) receiving region at the other. It engaged an electrocatalytic reaction between electrochemically activated glucose oxidase (GOx) and glucose to enhance its sensitivity. Briefly, upon hybridizing to its target miRNA, the stem loop is unlocked exposing the DP receiving region. A subsequent hybridization with the DPs brought them together with an amplifier, the activated GOx, onto the electrode. The activated GOx exhibited excellent catalytic activity towards electrooxidation of glucose. MicroRNA detection could therefore be conducted in 60 mM glucose in phosphate-buffered saline. A detection limit of 4.0 fM and a linear calibration curve up to 10 pM were obtained under optimal conditions. The assay was applied to profile human let-7 miRNA expressions in cultured cancer cells.     

Development of a highly sensitive fluorescence probe for hydrogen peroxide

Hydrogen peroxide is believed to play a role in cellular signal transduction by reversible oxidation of proteins. Here, we report the design and synthesis of a novel fluorescence probe for hydrogen peroxide, utilizing a photoinduced electron transfer strategy based on benzil chemistry to control the fluorescence. The practical value of this highly sensitive and selective fluorescence probe, NBzF, was confirmed by its application to imaging of hydrogen peroxide generation in live RAW 264.7 macrophages. NBzF was also employed for live cell imaging of hydrogen peroxide generated as a signaling molecule in A431 human epidermoid carcinoma cells.     

A highly selective and sensitive method for identification of gold

Summary A highly sensitive method for detection of gold, almost free from interferences, is described. The reaction is performed on a short column of anion-exchange resin Dowex 1 X8 (100–200 mesh) in iodide form. To the test solution containing 0.13g/ml of gold(III) is added Sb-solution (weight ratio Au: Sb=1 200) and the mixture is then passed through the resin, followed by 1N NaOH. A crimson colour appearing within 2–3 min indicate gold. Many metal ions, including Pt-metals, Tl(I), Tl(III), Ir(IV), In (III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) do not interfere. In the presence of 50-fold excess of Ag(I) or Bi(III) there is no colour because of the formation of a precipitate on the resin.

---

Zusammenfassung Ein hochempfindliches und selektives Verfahren zum qualitativen Gold-nachweis wurde vorgeschlagen. Die Reaktion wird in einer 10 mm hohen Anionenaustauschersäule Dowex 1 X8 in Jodidform durchgeführt. Zu der aufgetragenen Probelösung fügt man Sb(III) und (V) (im Verhältnis Au: Sb= 1 200) und versetzt nachher auf der Säule mit 1-n NaOH. Nach einigen Minuten entsteht um die Harzkörner eine himbeerrote Färbung. Pt-Metalle, Tl(I), Tl(III), Ir(IV), In(III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) stören nicht; Ag(I) und Bi(III) stören gleichfalls nicht, solange sie in nicht mehr als 50facher Menge neben Gold vorliegen. Bei höheren Konzentrationen setzen sie sich als unlösliche Jodide um die Harzkörner ab und stören. Die Nachweisgrenze der Reaktion liegt bei 0,13g/ml.

     

铟的灵敏光度测定法

我国对微量铟的显色反应研究得较少.最常用的是碱性染料萃取光度法,但操作冗繁而且苯的毒性较大.因此寻找灵敏度高而又能在水相测定铟的新方法是很有必要的. 用苯荧光酮(2,3,7-三羟基-9-苯基-6-荧光酮,PF)作显色剂的胶束增溶分光光度法已应用于锗、钼、锡、镓等的测定,但用类似的方法测铟则尚未见报道.我们的实验证明,在pH为7.7～8.9的醋酸-氢氧化铵缓冲介质中,铟与PF及氯化十六烷基吡啶(OPC)生成玫瑰红色的三元配合物,其配合比为In(III):PF:CPC=1:2:2,表观稳定常数为8.6×10~(10),摩尔吸收系数达1.28×10~5.提出用乙酸乙酯萃取分离杂质.利用本显色反应测定微量铟,方法灵敏且稳定,准确度和精密度均较好.     

Electro-kinetically driven route for highly sensitive blood pathology on a paper-based device

Enhancing the sensitivity of colorimetric detection in paper-devices is a quintessential step in achieving frugal diagnosis. Here, we demonstrate an effective way of improving the detection sensitivity of paper-based devices, as mediated by electro-kinetic mechanisms. By directly employing blood plasma, we investigate the electro-kinetic clustering of glucose, a neutral molecule in paper devices. Under the influence of uniform electric field, dispersed glucose gets accumulated in the paper strips. Due to the combination of EOF and electrophoretic migration, we achieve twofold increase in the colour intensity for both normal and diabetic samples. This approach is robust and possesses better sensitivity than conventional colorimetric assays and can be easily extended to other body fluid based diagnosis. These results may turn out to be of profound importance in improving the quality of pathological diagnosis in low-cost paper-based point-of-care devices deployed in resource-limited settings.     

Surface functionalization chemistries on highly sensitive silica-based sensor chips

The surfaces of silica-based sensor chips, designed for evanescent-field-coupled waveguide-mode sensors, were functionalized using various surface chemistries. The immobilization of molecular entities on the functionalized silica surfaces was monitored using various microscopic techniques (scanning electron, fluorescence, and atomic force microscopies). Further, gold nanoparticle-based signal enhancement analyses were performed with protein conjugation on different functionalized surfaces using a waveguide-mode sensor. Based on these analyses, the sensor surfaces modified with glutaraldehyde (Glu) and carbonyldiimidazole were found to be good for molecules of different sizes. In addition, it can be inferred that the Glu-modified surface may be suitable for small molecules with diameters around 5 nm owing to its surface roughness. The modified surface with carbonyldiimidazole is suitable for the direct immobilization of larger molecules especially for biomolecular assemblies without intermediate chemical modifications.     

A highly sensitive fluorescent immunoassay based on avidin-labeled nanocrystals

Nanocrystals of the fluorogenic precursor fluorescein diacetate (FDA) were applied as labels in order to improve on the assay sensitivity achieved in our previous studies. Each FDA nanocrystal can be converted into ∼2.6×10⁶ fluorescein molecules, which is useful for improving immunoassay sensitivity and limits of detection. NeutrAvidin was simply adsorbed onto the surface of the FDA nanocrystals, which were coated with distearoylglycerophosphoethanolamine (DSPE) modified with amino(poly(ethylene glycol))(PEG(2000)-Amine) as an interface for coupling biomolecules. This can be applied to detect different kinds of analytes that are captured by corresponding biotinylated biomolecules in different bioanalytical applications. The applicability of the NeutrAvidin-labeled nanocrystals was demonstrated in an immunoassay using the labeled avidin–biotin technique. Biotinylated antibody and FDA-labeled avidin were applied to the assay sequentially. The performance was compared with the traditional sandwich-type assay for mouse immunoglobulin G detection. Following the immunoreaction, the nanocrystals were released by hydrolysis and dissolution instigated by adding a large volume of organic solvent/sodium hydroxide mixture. The limit of detection was lower (by a factor of 2.5–21) and the sensitivity was (3.5–30-fold) higher than immunoassays using commercial labeling systems (FITC and peroxidase). This study shows that using fluorescent nanocrystals in combination with the avidin–biotin technique can enhance assay sensitivity and provide a lower limit of detection without requiring long incubation times as in enzyme-based labels.