An efficient one-pot synthesis of C2-symmetric triazolophanes by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction

A facile and efficient one-pot synthesis of 12-15-membered triazolophanes has been accomplished using CuAAC methodology. The formation of triazolophanes was confirmed by spectral analysis and the products were isolated in good yield. The effect of solvents on this reaction was also studied.     

Click chemistry for the synthesis of 5-substituted 1H-tetrazoles from boron-azides and nitriles

A novel and metal free catalysis of synthesizing 5-substituted 1H-tetrazoles through 1,3-dipolar cycloaddition of boron-azides and nitriles is reported with broad substrate scope and excellent yields.     

Intramolecular copper(I)-catalyzed 1,3-dipolar cycloaddition of azido-alkynes: synthesis of triazolo-benzoxazepine derivatives and their biological evaluation

Synthesis of a series of [1,2,3] triazolo [5,1-c] [1,4]benzoxazepine derivatives have been accomplished by the intramolecular Cu(I)-catalyzed cycloaddition of azido-alkynes derived from salicylaldehyde. The biological profile of these heterocyclic structural scaffolds toward anti-bacterial as well as anti-fungal activity has also been illustrated.     

Light-induced copper(I)-catalyzed click chemistry

Light can be used as an activator for the in situ generated copper(I)-catalyzed click reaction between azides and alkynes without adding reducing agents. The accumulation of sufficient concentration of copper(I) throughout the reaction can successfully be achieved by UV irradiation, in the presence of air.     

A theoretical investigation of the regio- and stereoselectivities of the 1,3-dipolar cycloaddition of C-diethoxyphosphoryl-N-methylnitrone with substituted alkenes

A theoretical study of the regio- and stereoselectivities of the 1,3-dipolar cycloaddition of C-diethoxyphosphoryl-N-methylnitrone with substituted alkenes (allyl alcohol and methyl acrylate) is carried out using DFT at the B3LYP/6-31G(d,p) level of theory. The FMO analysis and DFT-based reactivity indices confirmed the experimental ortho regioisomeric pathway. Potential energy surface analysis shows that these 1,3-dipolar cycloaddition reactions favor the formation of the ortho-trans cycloadduct in both cases. The obtained results are in agreement with experimental data.     

Addressing the scope of the azide-nitrile cycloaddition in glycoconjugate chemistry. The assembly of C-glycoclusters on a calix[4]arene scaffold through tetrazole spacers

New glycoclusters constituted of ribosylmethyl, galactosylmethyl, and glucosylmethyl fragments assembled on a calix[4]arene platform by means of propoxytetrazole spacers have been prepared by coupling the corresponding sugar azides with p-toluenesulfonyl cyanide, and then reacting 1-glycosylmethyl-5-sulfonyl-tetrazole derivatives thus formed with a calix[4]arene tetrol.     

An experimental and theoretical investigation of the regio- and stereoselectivity of the polar [3+2] cycloaddition of azomethine ylides to nitrostyrenes

The regio- and stereochemical polar [3+2] cycloaddition of the azomethine ylides, which were generated in situ by the reaction of isatin derivatives and proline, with trans-β-nitrostyrene and (E)-1-phenyl-2-nitropropene were studied using experimental and theoretical methods. In comparison with trans-β-nitrostyrene, when the reactions were performed with (E)-1-phenyl-2-nitropropene, a remarkable inversion in the regioselectively was observed. The regioselectivity of the reactions was investigated using global and local reactivity indices and frontier molecular orbital (FMO) analysis at the B3LYP/6-31G(d,p) level of theory. The effects of the electronic and steric factors on the regioselectivity of the reactions were discussed. The inspection of geometries and energetics of transition states revealed the importance of weak interactions in regioselectivity of the cycloaddition reactions.     

NMR spectroscopic and theoretical study on the isomerism of dimethyl benzodiazepine(diylidene)diacetates

The isomerism of dimethyl 2,2′-(7,8-dichloro-1H-benzo[b][1,4]diazepine-2,4-(3H,5H)diylidene)diacetate ( 1a ) and dimethyl 2,2′-(7,8-dichloro-3-methyl-1H-benzo[b][1,4]diazepine-2,4-(3H,5H)diylidene)diacetate ( 1b ) was investigated by ¹H, ¹³C and ¹⁵N nuclear magnetic resonance (NMR) spectroscopy. In CDCl₃ solution, inversion of the diazepine ring was observed, whereas in (D₆)DMSO and (D₇)DMF solution, besides the ring inversion, a partial cleavage of one chelate ring appeared connected with (E/Z) isomerization about one of the exocyclic C=C bonds. Gibbs free energies (ΔG) and free activation energies (ΔG^≠) were calculated based on B3PW91-SCRF/ZVP DFT computations. Agreement between NMR data and density functional theory (DFT) computations was found.     

A theoretical study of the mechanism and stereoselectivity of the Diels-Alder cycloaddition between difluoro-2-methylencyclopropane and furan

A theoretical study of the molecular mechanism and stereoselectivity of the Diels-Alder cycloaddition reaction between difluoro-2-methylencyclopropane and furan has been carried out at the B3LYP/6-31G+^∗∗ level of theory. The calculation of activation and reaction energies indicates that the 3-endo cycloadduct is favored both kinetically and thermodynamically, which is in agreement with the experimental data. Analysis of the bond order and charge transfer in the transition states shows that this reaction takes place via a synchronous-concerted mechanism.     

Theoretical studies on tautomerism of tetrazole derivatives by polarisable continuum method (PCM)

Computational calculations at B3LYP/6-31++G(d,p) level were employed in the study of the predominant tautomeric forms of 1-H and 2-H tetrazole derivatives (5-NO₂, 5-CF₃, 5-F, 5-H, 5-NH₂, 5-OH, 5-CH₃) in the gas phase and solution using PCM model. For electron withdrawing derivatives in the gas phase and solution 2-H forms are more stable and dominant form. For electron releasing groups in the gas phase and solution with low dielectric constants the 2-H form is more stable but in solvents with high dielectric constants 1-H isomer is dominant form. In addition variation of dipole moments and charges on atoms in the solvents are studied.     

Click chemistry on solid support: synthesis of a new REM resin and application for the preparation of tertiary amines

1,3-Dipolar cycloaddition was employed for the synthesis of a highly practical REM resin. Exploiting this concept, the resulting triazolylmethyl acrylate (TMA) resin was used for an efficient parallel synthesis of tertiary amines by Michael addition, subsequent quarternization and cleavage by means of β-elimination.     

Solvent-free 1,3-Dipolar Cycloaddition of Azomethine Imines with Terminal Alkynes Promoted by Calcium Fluoride Under the Ball Milling Condition

A convenient and efficient procedure for the synthesis of N,N-bicyclic pyrazolidinone derivatives has been developed via the reaction of azomethine imines with terminal alkynes under the ball milling condition without solvent, which was promoted by calcium fluoride with a catalyst of copper(I) salt. The cyclization reactions exhibited moderate to high yields.     

Cleavage of acetylenic substituents from camphor-derivatives by copper(I) chloride

Copper(I) chloride was found to be a highly efficient reagent to promote the cleavage of acetylenic substituents from the camphor skeleton of compounds 1 containing two C-C triple bonds as well as from the compounds 6 and 7 containing one. This is a formal reversal of the formation of these compounds by the reaction of acetylides with keto and imino groups in compound 18. The substituent R at the triple bond modifies the reactivity and regioselectivity. As intermediates in the process we identified complexes of the types [Cu(L)_depr] (where (L)_depr denotes a deprotonated camphor-derived ligand (L)) and [CuCl(L)]. Quantum mechanical calculations support and rationalize the experimental results.     

Efficient synthesis of a labile copper(I)-rotaxane complex using click chemistry

Copper(I)-induced threading of 5,5′-diazidomethyl-2,2′-bipyridine through a coordinating ring followed by reaction of a propargyl ether attached to a stopper group leads to the desired rotaxane in 62% yield. The reaction is carried out under the ‘click chemistry’ conditions with 0.75 equiv of additional copper(I).     

A convenient method for constructing novel tetrahydropyrido[4′,3′:4,5]thieno[2,3-d]-pyrimidinones-carbohydrate and amino acid conjugates via copper(I)-catalyzed alkyne-azide ‘Click Chemistry’

Novel conjugates of tetrahydropyridothienopyrimidones and carbohydrates or amino acids linked by 1,2,3-triazoles were synthesized. After establishing the tetrahydropyridothienopyrimidones ring system by ring closure, propargyl groups were introduced by N-alkylation. Cu-catalyzed cycloaddition of the propargyl products with azido group containing hexoses or amino acids gives the corresponding 1,2,3-triazoles in high yields. This methodology also allowed attaching two carbohydrate molecules to the tetrahydropyridothienopyrimidone core. Interesting dependence of the regioselectivity of the N-propargylation of the pyrimidone ring on the exocyclic substituent found adjacent to the pyrimidine-N-atom was observed. A remarkable case of a non-catalyzed intramolecular [3+2]-cycloaddition of an alkyne with an azide to a 1,2,3-triazole was observed, which occurred in the solid state at rt or below.     

A theoretical study on the decomposition mechanism of artemisinin

A theoretical study on the artemisinin decomposition mechanism is reported. The suggested pathways have been reproduced and the appearance of the final products can be explained in a satisfactory way. In addition, several intermediates and radicals have been found as relatively stable species, thus giving support to the current hypothesis that some of these species can be responsible for the antimalarial action of artemisinin and its derivatives.     

A DFT study of the Huisgen 1,3-dipolar cycloaddition between hindered thiocarbonyl ylides and tetracyanoethylene

The mechanism for the 1,3-dipolar cycloaddition between the hindered thiocarbonyl ylide 1 and tetracyanoethylene 2 has been studied at the B3LYP/6-31G^∗ level. Formation of the [3+2] cycloadduct 4 takes place through a stepwise mechanism that is initiated by the nucleophilic attack of the thiocarbonyl ylide 1 to the ethylene derivative 2 to give a zwitterionic intermediate IN. The subsequent cyclization of IN yields a seven-membered cyclic ketene imine 6, which equilibrates with the thermodynamically more stable [3+2] cycloadduct 4. The computed free energies are in agreement with the experimental outcomes.     

A stereoselective method for the synthesis of enantiopure 3-substituted 4-hydroxyproline derivatives via 1,3-dipolar cycloadditions

The stereoselective 1,3-dipolar cycloaddition between (Z)-1,4-dichloro-2-butene and a menthone-derived nitrone led to the corresponding isoxazolidine. Regioselective azidation of a single chlorine atom followed by another Cu(I)-catalyzed azide–alkyne 1,3-dipolar cycloaddition (CuAAC) induced enantiopure 1,2,3-triazolyl-functionalized isoxazolidines. The subsequent acidic cleavage of the menthone chiral auxiliary and reductive cleavage of the isoxazolidine N–O bond triggered an intramolecular cyclization through the displacement of the second chlorine. This rapid and stereoselective synthetic strategy provided reliable access to a series of enantiopure 3-substituted 4-hydroxyproline derivatives.     

A theoretical study on the inhibition efficiencies of some quinoxalines as corrosion inhibitors of copper in nitric acid

Quantum chemical calculations based on DFT method were performed on three quinoxalines compounds namely ethyl 2-(4-(2-ethoxy-2-oxoethyl)-2-p-tolylquinoxalin-1(4H)-yl)acetate (Q1), 1-[4-acetyl-2-(4-chlorophenyl)quinoxalin-1(4H)-yl]acetone (Q2) and 2-(4-methylphenyl)-1,4-dihydroquinoxaline (Q3), used as corrosion inhibitors for copper in nitric acid media to determine the relationship between the molecular structure of quinoxalines and inhibition efficiency. Quantum chemical parameters such as the highest occupied molecular orbital energy (E_HOMO), the lowest unoccupied molecular orbital energy (E_LUMO), energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (ΔN), and the total energy (TE), were calculated. The theoretically obtained results were found to be consistent with the experimental data reported.