Theory of local electrification of cavitation bubbles: new approaches

The theory of local electrification of cavitation bubbles has been generalised. The major cases for a local electrification of bubbles in a cavitation field were considered; i.e., fragmentation and deformation of cavitation bubbles. The splitting of cavitation bubbles was considered taking into account surface tension, bubble perturbation, Stokes force and electrostatic forces between like charges on the wall of the collapsing neck of the fragment bubble. The problem of the uncompensated charge on the surface of the deformed cavitation bubble is solved. For this purpose radial deformations are considered in terms of the paraboloid of rotation and axial deformation approximated by one cavity hyperboloid of rotation. The maximum electric strength is accounted for. An explanation for some physical and physico-chemical effects in cavitation fields is proposed in terms of the electrical theory of the local electrification of cavitation bubbles.     

Radial oscillation and translational motion of a gas bubble in a micro-cavity

According to classical nucleation theory, a gas nucleus can grow into a cavitation bubble when the ambient pressure is negative. Here, the growth process of a gas nucleus in a micro-cavity was simplified to two “events”, and the full confinement effect of the surrounding medium of the cavity was considered by including the bulk modulus in the equation of state. The Rayleigh–Plesset-like equation of the cavitation bubble in the cavity was derived to model the radial oscillation and translational motion of the cavitation bubble in the local acoustic field. The numerical results show that the nucleation time of the cavitation bubble is sensitive to the initial position of the gas nucleus. The cavity size affects the duration of the radial oscillation of the cavitation bubble, where the duration is shorter for smaller cavities. The equilibrium radius of a cavitation bubble grown from a gas nucleus increases with increasing size of the cavity. There are two possible types of translational motion: reciprocal motion around the center of the cavity and motion toward the cavity wall. The growth process of gas nuclei into cavitation bubbles is also dependent on the compressibility of the surrounding medium and the magnitude of the negative pressure. Therefore, gas nuclei in a liquid cavity can be excited by acoustic waves to form cavitation bubbles, and the translational motion of the cavitation bubbles can be easily observed owing to the confining influence of the medium outside the cavity.     

Dielectric polarization in the Planck theory of sonoluminescence

Sonoluminescence observed in the cavitation of liquid H2O may be explained by the Planck theory of SL, which treats the bubbles as collapsing miniature masers having optical waves standing in resonance with the dimensions of the bubble cavity. Microwaves are shown to be created from the Planck energy of the standing waves, provided the bubble wall can be treated as a perfect blackbody surface. Liquid H2O is strongly absorbent in the ultraviolet and there the bubble approaches a Planck blackbody enclosure. The microwaves are created at frequencies proportional to the bubble collapse velocity only to be promptly absorbed by the rotation quantum states of the H2O and other bubble wall molecules. The microwaves are absorbed discretely at rotation line frequencies, or continuously by dipole rotation at frequencies from 1 to 30 GHz. In the liquid state, molecular rotation of the H2O molecule is hindered and the microwave energy is rapidly turned into bending energy by intermolecular collisions. Subsequently, the bubble wall molecules may thereby ionize and produce visible photons. The microwaves create intense electrical fields in the bubble wall by dielectric polarization. If the gases adjacent to the bubble wall undergo electrical breakdown, free electrons are created, thereby providing sonoluminescence with a magnetic field effect.     

A dual passive cavitation detector for localized detection of lithotripsy-induced cavitation in vitro

A passive cavitation detector (PCD) identifies cavitation events by sensing acoustic emissions generated by the collapse of bubbles. In this work, a dual passive cavitation detector (dual PCD), consisting of a pair of orthogonal confocal receivers, is described for use in shock wave lithotripsy. Cavitation events are detected by both receivers and can be localized to within 5 mm by the nature of the small intersecting volume of the focal areas of the two receivers in association with a coincidence detection algorithm. A calibration technique, based on the impulse response of the transducer, was employed to estimate radiated pressures at collapse near the bubble. Results are presented for the in vitro cavitation fields of both a clinical and a research electrohydraulic lithotripter. The measured lifetime of the primary growth-and-collapse of the cavitation bubbles increased from 180 to 420 microseconds as the power setting was increased from 12 to 24 kV. The measured lifetime compared well with calculations based on the Gilmore-Akulichev formulation for bubble dynamics. The radiated acoustic pressure 10 mm from the collapsing cavitation bubble was measured to vary from 4 to 16 MPa with increasing power setting; although the trends agreed with calculations, the predicted values were four times larger than measured values. The axial length of the cavitation field correlated well with the 6-dB region of the acoustic field. However, the width of the cavitation field (10 mm) was significantly narrower than the acoustic field (25 mm) as bubbles appeared to be drawn to the acoustic axis during the collapse. The dual PCD also detected signals from "rebounds," secondary and tertiary growth-and-collapse cycles. The measured rebound time did not agree with calculations from the single-bubble model. The rebounds could be fitted to a Rayleigh collapse model by considering the entire bubble cloud as an effective single bubble. The results from the dual PCD agreed well with images from high-speed photography. The results indicate that single-bubble theory is sufficient to model lithotripsy cavitation dynamics up to time of the main collapse, but that upon collapse bubble cloud dynamics becomes important.     

Effects of surface tension on the dynamics of a single micro bubble near a rigid wall in an ultrasonic field

Acoustic cavitation is a very important hydrodynamic phenomenon, and is often implicated in a myriad of industrial, medical, and daily living applications. In these applications, the effect mechanism of liquid surface tension on improving the efficiency of acoustic cavitation is a crucial concern for researchers. In this study, the effects of liquid surface tension on the dynamics of an ultrasonic driven bubble near a rigid wall, which could be the main mechanism of efficiency improvement in the applications of acoustic cavitation, were investigated at the microscale level. A synchronous high-speed microscopic imaging method was used to clearly record the temporary evolution of single acoustic cavitation bubble in the liquids with different surface tension. Meanwhile, the bubble dynamic characteristics, such as the position and time of bubble collapse, the size and stability of the bubbles, the speed of bubble boundaries and the micro-jets, were analyzed and compared. In the case of the single bubbles near a rigid wall, it was found that low surface tension reduces the stability of the bubbles in the liquid medium. Meanwhile, the bubbles collapse earlier and farther from the rigid wall in the liquids with lower surface tension. In addition, the surface tension has no significant influence on the speed of the first micro-jet, but it can substantially increase the speed of second and the third micro-jets after the first collapse of the bubble. These effects of liquid surface tension on the bubble dynamics can explain the mechanism of surfactants in numerous fields of acoustic cavitation for facilitating its optimization and application.     

球状泡群内气泡的耦合振动

振动气泡形成辐射场影响其他气泡的运动, 故多气泡体系中气泡处于耦合振动状态. 本文在气泡群振动模型的基础上, 考虑气泡间耦合振动的影响, 得到了均匀球状泡群内振动气泡的动力学方程, 以此为基础分析了气泡的非线性声响应特征. 气泡间的耦合振动增加了系统对每个气泡的约束, 降低了气泡的自然共振频率, 增强了气泡的非线性声响应. 随着气泡数密度的增加, 振动气泡受到的抑制增强; 增加液体静压力同样可抑制泡群内气泡的振动, 且存在静压力敏感区(1–2 atm, 1 atm=1.01325×10⁵ Pa); 驱动声波对气泡振动影响很大, 随着声波频率的增加, 能够形成空化影响的气泡尺度范围变窄. 在同样的声条件、泡群尺寸以及气泡内外环境下, 初始半径小于5 μm 的气泡具有较强的声响应. 气泡耦合振动会削弱单个气泡的空化影响, 但可延长多气泡系统空化泡崩溃发生的时间间隔和增大作用范围, 整体空化效应增强.     

Bubbles in an acoustic field: an overview

Acoustic cavitation is the fundamental process responsible for the initiation of most of the sonochemical reactions in liquids. Acoustic cavitation originates from the interaction between sound waves and bubbles. In an acoustic field, bubbles can undergo growth by rectified diffusion, bubble-bubble coalescence, bubble dissolution or bubble collapse leading to the generation of primary radicals and other secondary chemical reactions. Surface active solutes have been used in association with a number of experimental techniques in order to isolate and understand these activities. A strobe technique has been used for monitoring the growth of a single bubble by rectified diffusion. Multibubble sonoluminescence has been used for monitoring the growth of the bubbles as well as coalescence between bubbles. The extent of bubble coalescence has also been monitored using a newly developed capillary technique. An overview of the various experimental results has been presented in order to highlight the complexities involved in acoustic cavitation processes, which on the other hand arise from a simple, mechanical interaction between sound waves and bubbles.     

Comparisons of sonoluminescence from single-bubbles and cavitation fields: bridging the gap

Sonoluminescence (SL) refers to the generation of light through the energetic pulsations of acoustic cavitation bubbles in a liquid. For years, SL was observed primarily in cavitation fields. These bubbles are believed by many to undergo near-adiabatic compression, resulting in the heating of the bubble contents and the subsequent emission of light. Recently, researchers have discovered a 'new' form of sonoluminescence in which light is observed to emanate from a single bubble undergoing very large volume excursions. The mechanism for light production is unknown, but many believe it is due to a rapid heating of the central core by an imploding shock wave. Based in part on the emission time scales, there is a common belief that the two forms of SL are quite distinct. We address this issue by comparing the two phenomena with regards to their light-flash durations and emission spectra--leading to some surprising differences and similarities.     

An equivalent method of jet impact loading from collapsing near-wall acoustic bubbles: A preliminary study

Cavitation damage is a micro, high-speed, multi-phase complex phenomenon caused by the near-wall bubble group collapse. The current numerical simulation method of cavitation mainly focuses on the collapse impact of a single cavitation bubble. The large-scale simulation of the cavitation bubble group collapse is difficult to perform and has not been studied, to the best of our knowledge. In this study, the equivalent model of impact loading of acoustic bubble collapse micro-jets is proposed to study the cavitation erosion damage of materials. Based on the theory of the micro-jet and the water hammer effect of the liquid–solid impact, an equivalent model of impact loading of a single acoustic bubble collapse micro-jet is established under the principle of deformation equivalence. Since the acoustic bubbles can be considered uniformly distributed in a small enough area, an equivalent model of impact loading of multiple acoustic bubble collapse micro-jets in a micro-segment can be derived based on the equivalent results of impact loading of a single acoustic bubble collapse micro-jet. In fact, the equivalent methods of cavitation damage loading for single and multiple near-wall acoustic bubble collapse micro-jets are formed. The verification results show the law of cavitation deformation of concrete using equivalent loading is consistent with that of a micro-jet simulation, and the average relative errors and the mean square errors are insignificant. The equivalent method of impact loading proposed in this paper has high accuracy and can greatly improve the calculation efficiency, which provides technical support for numerical simulation of concrete cavitation.     

The characterization of acoustic cavitation bubbles - an overview

Acoustic cavitation, in simple terms, is the growth and collapse of preexisting microbubbles under the influence of an ultrasonic field in liquids. The cavitation bubbles can be characterized by the dynamics of oscillations and the maximum temperatures and pressures reached when they collapse. These aspects can be studied both experimentally and theoretically for a single bubble system. However, in a multibubble system, the formation of bubble streamers and clusters makes it difficult to characterize the cumulative properties of these bubbles. In this overview, some recently developed experimental procedures for the characterization of acoustic cavitation bubbles have been discussed.     

Bubble proliferation in the cavitation field of a shock wave lithotripter

Lithotripter shock waves (SWs) generated in non-degassed water at 0.5 and 2 Hz pulse repetition frequency (PRF) were characterized using a fiber-optic hydrophone. High-speed imaging captured the inertial growth-collapse-rebound cycle of cavitation bubbles, and continuous recording with a 60 fps camcorder was used to track bubble proliferation over successive SWs. Microbubbles that seeded the generation of bubble clouds formed by the breakup of cavitation jets and by bubble collapse following rebound. Microbubbles that persisted long enough served as cavitation nuclei for subsequent SWs, as such bubble clouds were enhanced at fast PRF. Visual tracking suggests that bubble clouds can originate from single bubbles.     

Cavitation bubble dynamics studied by high speed photography and holography: part one

Bubble dynamics has been recognized as being responsible for many effects in ultrasonic fields, for example cleaning and destruction of surfaces, and emulsification. To improve the performance of ultrasonic devices which make use of these effects some knowledge of the dynamics of cavitation bubbles is needed. One of the main means of studying bubble dynamics is high speed photography in conjunction with some suitable bubble production mechanism to get rid of the statistical appearance of bubbles encountered in ultrasonic cavitation. Results of jet and vortex ring formation obtained mainly with spark-and laser-produced bubbles are reported and demonstrated in a series of frames.     

Effect of dissolved gases in water on acoustic cavitation and bubble growth rate in 0.83 MHz megasonic of interest to wafer cleaning

Changes in the cavitation intensity of gases dissolved in water, including H₂, N₂, and Ar, have been established in studies of acoustic bubble growth rates under ultrasonic fields. Variations in the acoustic properties of dissolved gases in water affect the cavitation intensity at a high frequency (0.83 MHz) due to changes in the rectified diffusion and bubble coalescence rate. It has been proposed that acoustic bubble growth rates rapidly increase when water contains a gas, such as hydrogen faster single bubble growth due to rectified diffusion, and a higher rate of coalescence under Bjerknes forces. The change of acoustic bubble growth rate in rectified diffusion has an effect on the damping constant and diffusivity of gas at the acoustic bubble and liquid interface. It has been suggested that the coalescence reaction of bubbles under Bjerknes forces is a reaction determined by the compressibility and density of dissolved gas in water associated with sound velocity and density in acoustic bubbles. High acoustic bubble growth rates also contribute to enhanced cavitation effects in terms of dissolved gas in water. On the other hand, when Ar gas dissolves into water under ultrasound field, cavitation behavior was reduced remarkably due to its lower acoustic bubble growth rate. It is shown that change of cavitation intensity in various dissolved gases were verified through cleaning experiments in the single type of cleaning tool such as particle removal and pattern damage based on numerically calculated acoustic bubble growth rates.     

Characterisation of the acoustic cavitation cloud by two laser techniques

An experimental investigation of the size and volumetric concentration of acoustic cavitation bubbles is presented. The cavitation bubble cloud is generated at 20 kHz by an immersed horn in a rectangular glass vessel containing bi-distilled water. Two laser techniques, laser diffraction and phase Doppler interferometry, are implemented and compared. These two techniques are based on different measuring principles. The laser diffraction technique analyses the light pattern scattered by the bubbles along a line-of-sight of the experimental vessel (spatial average). The phase Doppler technique is based on the analysis of the light scattered from single bubbles passing through a set of interference fringes formed by the intersection of two laser beams: bubble size and velocity distributions are extracted from a great number of single-bubble events (local and temporal average) but only size distributions are discussed here. Difficulties arising in the application of the laser diffraction technique are discussed: in particular, the fact that the acoustic wave disturbs the light scattering patterns even when there are no cavitation bubbles along the measurement volume. As a consequence, a procedure has been developed to correct the raw data in order to get a significant bubble size distribution. After this data treatment has been applied the results from the two measurement techniques show good agreement. Under the emitter surface, the Sauter mean diameter D(3, 2) is approximately 10 microm by phase Doppler measurement and 7.5 microm by laser diffraction measurement at 179 W. Note that the mean measured diameter is much smaller than the resonance diameter predicted by the linear theory (about 280 microm). The influence of the acoustic power is investigated. Axial and radial profiles of mean bubble diameters and void fraction are also presented.     

Sonoluminescence and dynamics of cavitation bubble populations in sulfuric acid

The detailed link of liquid phase sonochemical reactions and bubble dynamics is still not sufficiently known. To further clarify this issue, we image sonoluminescence and bubble oscillations, translations, and shapes in an acoustic cavitation setup at 23 kHz in sulfuric acid with dissolved sodium sulfate and xenon gas saturation. The colour of sonoluminescence varies in a way that emissions from excited non-volatile sodium atoms are prominently observed far from the acoustic horn emitter (“red region”), while such emissions are nearly absent close to the horn tip (“blue region”). High-speed images reveal the dynamics of distinct bubble populations that can partly be linked to the different emission regions. In particular, we see smaller strongly collapsing spherical bubbles within the blue region, while larger bubbles with a liquid jet during collapse dominate the red region. The jetting is induced by the fast bubble translation, which is a consequence of acoustic (Bjerknes) forces in the ultrasonic field. Numerical simulations with a spherical single bubble model reproduce quantitatively the volume oscillations and fast translation of the sodium emitting bubbles. Additionally, their intermittent stopping is explained by multistability in a hysteretic parameter range. The findings confirm the assumption that bubble deformations are responsible for pronounced sodium sonoluminescence. Notably the observed translation induced jetting appears to serve as efficient mixing mechanism of liquid into the heated gas phase of collapsing bubbles, thus potentially promoting liquid phase sonochemistry in general.     

The dynamics of cavitation bubbles in a sealed vessel

A model of cavitation bubbles is derived in liquid confined in an elastic sealed vessel driven by ultrasound. In this model, an assumption that the pressure acting on the sealed vessel due to bubble pulsations is proportional to total volume change of bubbles is made. Numerical simulations are carried out for a single bubble and for bubbles. The results show that the pulsation of a single bubble can be suppressed to a large extent in sealed vessel, and that of two matched bubbles with same ambient radius can be further suppressed. However, when two mismatched bubbles have the same ambient radii, an interesting breathing phenomenon takes place, where one bubble pulsates inversely with the other one. Due to this breathing phenomenon the suppression effect becomes weak, so the maximum radii of two mismatched bubbles can be larger than that of a single bubble or that of two matched bubbles in sealed vessel. Besides that, for two mismatched bubbles with different ambient radii, the small one in sealed vessel under some certain parameters can pulsate as strong as or even stronger than that of a single bubble in an open vessel.     

含气泡液体中气泡振动的研究

研究了含气泡液体中单个气泡在驱动声场一定情况下的振动过程. 让每次驱动声场作用的时间特别短, 使气泡半径发生微小变化后再将其变化反馈到气泡群对驱动声场的散射作用中去, 从而可以得到某单个气泡周围受气泡散射影响后的声场, 接着再让气泡在该声场作用下做短时振动, 如此反复. 通过这样的方法, 研究了液体中单个气泡的振动情况并对其半径变化进行了数值模拟, 结果发现, 在液体中含有大量气泡的情况下, 某单个气泡的振动过程明显区别于液体中只有一个气泡的情况. 由于大量气泡和驱动声场的相互作用, 使气泡半径的变化存在多种不同的振动情况, 在不同的气泡大小和含量的情况下, 半径变化过程分别表现为: 在平衡位置附近振荡的过程; 周期性的空化过程; 一次空化过程后保持某一大小振荡的过程; 增长后维持某一大小振荡的过程等. 所以, 对于含气泡液体中气泡振动的研究, 在驱动声场一定的情况下, 必须考虑气泡含量的因素. 关键词： 含气泡液体 超声空化 散射 数值模拟     

Effects of adjacent bubble on spatiotemporal evolutions of mechanical stresses surrounding bubbles oscillating in tissues

The cavitation dynamics and mechanical stress in viscoelastic tissues, as the primary mechanisms of some ultrasound therapies, are extremely complex due to the interactions of cavitation bubble with adjacent bubbles and surrounding tissues. Therefore, the cavitation dynamics and resultant mechanical stress of two-interacting bubbles in the viscoelastic tissues are numerically investigated, especially focusing on the effects of the adjacent bubble. The results demonstrate that the mechanical stress is highly dependent on the bubble dynamics. The compressive stress and tensile stress are generated at the stage of bubble expansion and collapse stage, respectively. Furthermore, within the initial parameters examined in this paper, the effects of the adjacent bubble will distinctly suppress the radial expansion of the small bubble and consequently lead its associated stresses to decrease. Owing to the superimposition of two stress fields, the mechanical stresses surrounding the small bubble in the direction of the neighboring bubble are smaller than those in other directions. For two interacting cavitation bubbles, the suppression effects of the nearby bubble on both the cavitation dynamics and the stresses surrounding the small bubble increase as the ultrasound amplitude and the initial radius of the large bubble increase, whereas they decrease with the inter-bubble distance increasing. Moreover, increasing the tissue viscoelasticity will reduce the suppression effects of the nearby bubble, except in instances where the compressive stress and tensile stress first increase and then decrease with the tissue elasticity and viscosity increasing respectively. This study can provide a further understanding of the mechanisms of cavitation-associated mechanical damage to the adjacent tissues or cells.     

Enhancement of oscillation amplitude of cavitation bubble due to acoustic wake effect in multibubble environment

Acoustic cavitation occurs in ultrasonic treatment causing various phenomena such as chemical synthesis, chemical decomposition, and emulsification. Nonlinear oscillations of cavitation bubbles are assumed to be responsible for these phenomena, and the neighboring bubbles may interact each other. In the present study, we numerically investigated the dynamic behavior of cavitation bubbles in multi-bubble systems. The results reveal that the oscillation amplitude of a cavitation bubble surrounded by other bubbles in a multi-bubble system becomes larger compared with that in the single-bubble case. It is found that this is caused by an acoustic wake effect, which reduces the pressure near a bubble surrounded by other bubbles and increases the time delay between the bubble contraction/expansion cycles and sound pressure oscillations. A new parameter, called “cover ratio” is introduced to quantitatively evaluate the variation in the bubble oscillation amplitude, the time delay, and the maximum bubble radius.     

Effects of medium viscoelasticity on bubble collapse strength of interacting polydisperse bubbles

Due to its physical and/or chemical effects, acoustic cavitation plays a crucial role in various emerging applications ranging from advanced materials to biomedicine. The cavitation bubbles usually undergo oscillatory dynamics and violent collapse within a viscoelastic medium, which are closely related to the cavitation-associated effects. However, the role of medium viscoelasticity on the cavitation dynamics has received little attention, especially for the bubble collapse strength during multi-bubble cavitation with the complex interactions between size polydisperse bubbles. In this study, modified Gilmore equations accounting for inter-bubble interactions were coupled with the Zener viscoelastic model to simulate the dynamics of multi-bubble cavitation in viscoelastic media. Results showed that the cavitation dynamics (e.g., acoustic resonant response, nonlinear oscillation behavior and bubble collapse strength) of differently-sized bubbles depend differently on the medium viscoelasticity and each bubble is affected by its neighboring bubbles to a different degree. More specifically, increasing medium viscosity drastically dampens the bubble dynamics and weakens the bubble collapse strength, while medium elasticity mainly affects the bubble resonance at which the bubble collapse strength is maximum. Differently-sized bubbles can achieve resonances and even subharmonic resonances at high driving acoustic pressures as the elasticity changes to certain values, and the resonance frequency of each bubble increases with the elasticity increasing. For the interactions between the size polydisperse bubbles, it indicated that the largest bubble generally has a dominant effect on the dynamics of smaller ones while in turn it is almost unaffected, exhibiting a pattern of destructive and constructive interactions. This study provides a valuable insight into the acoustic cavitation dynamics of multiple interacting polydisperse bubbles in viscoelastic media, which may offer a potential of controlling the medium viscoelasticity to appropriately manipulate the dynamics of multi-bubble cavitation for achieving proper cavitation effects according to the desired application.