Synthesis, characterization and chelating properties of poly [azo-(6-hydroxy-1,3-phenylene)]

Poly [azo(6-hydroxy-1,3-phenylene)] (PAHP) was prepared by alcoholic alkaline reduction of 2,4-dinitro phenol (DNP). The polymers prepared at various time intervals were characterized by elemental analyses, IR spectra and thermogravimetric analysis. The number average molecular weight was determined by non-aqueous titration. Viscometric study in DMF of all the three polymers were carried out and indicates polyelectrolyte behaviour. Viscometric study in DMF-water (85:15)(v/v) containing 1%KBr shows normal behaviour. Polymeric metal chelates of Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺ and Cr²⁺ with PAHP polymer were prepared and characterized.     

Theoretical studies on a possible synthesis reaction pathway on N8 (CS) clusters

The potential energy surfaces of N₈ clusters were investigated by density functional theory (DFT) and a possible synthesis reaction pathway for N₈ (C_S) was suggested. The species involved were fully optimized up to the B3LYP/6‐311+G* level of theory. Relative energies were further calculated at the QCISD/6‐311+G*//B3LYP/6‐311+G* level. The reaction rate constants of these steps from the 1 (N₅⁺?N₃^?, complex, C_S) to 2 (N₈, C_S), 2 (N₈, C_S) to 3 (N₈, C_S), 3 (N₈, C_S) to 4 (N₈, D_2d), and 4 (N₈, D_2d) to 5 (N₈, C_S) reactions were predicted by the VTST theory. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1334–1339, 2001     

Ein neuer Strukturtyp bei Kupfer-Lanthanoid-Oxowolframaten: CuDy5(WO4)8

A New Structure Type of Copper Lanthanoide Oxotungstates: CuDy₅(WO₄)₈ Single crystals of the hitherto unknown compound CuDy₅(WO₄)₈ were prepared in closed copper tubes and investigated by X-ray technique. It shows monoclinic symmetry, space group C—C2/c, a = 19.118, b = 5.612, c = 11.518 Å, β = 111.32°, Z = 2. The crystal structure is characterized by [W₄O₁₈] groups which are connected to layers. Dy³⁺ shows one sided capped trigonal prisms and Cu⁺/Dy³⁺ with statistical distribution an octahedral oxygen surrounding.     

Quantitative high-perormance liquid chromatographic analysis of nitroxoline and structurally related compounds

Summary Nitroxoline (8-hydroxy-5-nitroquinoline) and the structural related compounds 8-hydroxyquine, 8-hydroxy-5,7-dinitroquinoline, and 8-hydroxy-5-nitrosoquinoline have been investigated by reversed-phase high-performance liquid chromatography on C₁₈/ODS. Complete separation and symmetric, peaks were obtained by use of THF-methanol-water, 3∶3∶4, containing 10 mmol L⁻¹ disodium ethylenediamine tetraacetic acid (EDTA) and 10 mmol L⁻¹ citric acid in the water, as mobile phase. The pH and the concentration of EDTA in the mobile phase were found to be critical for eliminating tailing and for full separation. The calibration plot was linear for concentrations between 3.0 and 300 μg mL⁻¹; the regression coefficient was 0.99996. Assay of the nitroxoline standard showed that recovery was from 99.3 to 102%, with a mean standard deviation for nitroxoline of 0.9%. The method is suitable for quality control of nitroxoline.     

Bis-salicylaldehyde-ethylenediamine as an analytical reagent

Summary Copper has been determined gravimetrically as its bis-salicylaldehyde-ethylenediamine complex of the composition C₁₆H₁₄O₂N₂ · Cu, dried at 100–120° C. The complex is completely precipitated in theph range of 10.5–13.5, adjusted with ammonia or caustic alkali. It is stable in presence of excess ammonia, 0.1 N alkali, ammonium salts and complexing agents as tartrate, citrate, sodium-thiosulphate, fluoride, thiourea, triethanolamine and EDTA. In presence of tartrate and ammonia the ions of alkali metals, alkaline earths, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ and anions as VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3–, AsO₄ ^3– do not interfere. Ni²⁺ and Hg²⁺ are masked by tartrate, EDTA and ammonia; As³⁺, Sb³⁺ and Sn²⁺ are separated using fluoride as the complexing agent; at an alkalinity of 0.1 N caustic alkali in presence of tartrate As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ and Fe³⁺ are separated. Fe³⁺ can also be separated using triethanolamine as the masking agent at aph of about 13.0. Copper can be separated from almost all the ions, thus affording a highly selective method for the determination of copper.

---

Zusammenfassung Es wird eine gravimetrische Methode zur Bestimmung von Kupfer beschrieben, die auf der Bildung des Bis-salicylaldehyd-äthylendiaminkomplexes beruht. Dieser hat die Zusammensetzung C₁₆H₁₄O₂N₂ · Cu. Die Fällung wird imph-Bereich 10,5–13,5 (mit Ammoniak oder Alkalilauge eingestellt) vorgenommen und der Niederschlag bei 100°–120° C getrocknet. Der Komplex ist beständig in Gegenwart von überschüssigem Ammoniak, 0,1 n Alkali, Ammoniumsalzen sowie Tartrat, Citrat, Natriumthiosulfat, Fluorid, Thioharnstoff, Triäthanolamin und ÄDTA. In Gegenwart von Tartrat und Ammoniak stören nicht: Alkalien, Erdalkalien, Ag⁺, Tl⁺, Tl³⁺, Pb²⁺, Cd²⁺, Co²⁺, Mn²⁺, Pd²⁺, Al³⁺, Cr³⁺, La³⁺, Ce³⁺, Au³⁺, Pt⁴⁺, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺ sowie VO₃ ^–, MoO₄ ^2–, WO₄ ^2–, CrO₄ ^2–, PO₄ ^3– und AsO₄ ³⁺. Ni²⁺ und Hg²⁺ können mit Tartrat, ÄDTA und Ammoniak maskiert werden, As³⁺, Sb³⁺ und Sn²⁺ mit Fluorid. In 0,1 n ätzalkalischer Lösung in Gegenwart von Tartrat können As³⁺, Sb³⁺, Sn²⁺, Bi³⁺, Zn²⁺ und Fe³⁺ abgetrennt werden. Fe³⁺ kann ebenfalls mit Triäthanolamin beiph 13,0 maskiert werden. Das beschriebene Verfahren erlaubt somit eine Abtrennung des Kupfers von fast allen anderen Ionen.

---

---

Part I: Singh, B. R., and S. Kumar: Z. analyt. Chem. 185, 211 (1962).     

Studies on the Uptake of Rare Earth Elements on Polyacrylamidoxime Resins from Natural Concentrate Leachate Solutions

Synthesis of poly(acrylamidoxime) resin from polyacrylonitrile performed with different crosslinking ratios 2, 5, and 10 wt% of divinylbenzene as crosslinking agent, using methylbenzoate and dioctylphthalate as pore producing solvent, the reaction mixture occurred under nitrogen. Studies carried out on diluted solution from rare earth elements (REEs) concentrate contains impurities as Cu²⁺, Ni²⁺, Zn²⁺, Fe³⁺, Al³⁺, Si⁴⁺, Th⁴⁺, U⁶⁺, Ca²⁺, and K⁺. Changing some parameters as pH of the solution, time of feeding and type of acid as HCl, HNO₃, H₂SO₄. The adsorption efficiency of resin is in the order pH 6 > pH 5 > pH 4 > pH 2 with excluding pH 6 due to the precipitation of some of REEs with the impurities and complete precipitation of Dy ion during pH adjustment, the adsorption in HNO₃ > HCl > H₂SO₄ media.     

2-Mercapto-benzimidazole as an analytical reagent

Summary Palladium is quantitatively precipitated at aPH 5.0 to 10.1 by 2-mercapto-benzimidazole and the complex, Pd(C₇H₅N₂S)₂, which is found to be diamagnetic, is stable up to a temperature of 447 C. In presence of EDTA and tartrate or citrate and at aPH between 6 and 8, it is separated from alkalis, alkaline earths, Mg, Fe³⁺, Cr, Th, Zr, Ti, UO₂ ²⁺, Be, Ce³⁺, Ce⁴⁺, rare earths, Zn, Mn, Ni, Co, Pb, Bi, As, Sb³⁺, Sn⁴⁺, Tl⁺, Cu²⁺, Cd, Ir⁴⁺, Rh³⁺, Ru³⁺, Os⁴⁺, CrO₄ ^2–, MoO₄ ^2–, WO₄ ^2–, VO₃ ^–, PO₄ ^3– and AsO₄ ^3–. Pb, Ag and Hg²⁺ are kept in solution by potassium iodide while a small amount of Au³⁺ by thiosulphate. The palladium complex is either weighed after drying at 110 C or dissolved in a cyanide solution and determined volumetrically by back titrating the excess cyanide with a standard silver nitrate solution.     

Amphotere Ionenaustauscherharze

Zusammenfassung N-Methyl--aminopropionsäure-Harz bindet infolge Komplexbildung Cu²⁺, UO₂ ²⁺, Bi³⁺, Cr³⁺ und Fe³⁺, während Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺, Pb²⁺, Be²⁺, Tl⁺, NH₄ ⁺, Alkali-, Erdalkali- und Seltenerdionen keine Kapazität zeigen. Durch Variation des pH-Wertes, der Temperatur und Neutralsalzzusatz kann die Selektivität noch erhöht werden. Die analytische Anwendbarkeit wird an Hand von Trennungen binärer Gemische belegt, die oft als Filtrationsverfahren mit geringem Arbeits- und Zeitaufwand durchgeführt werden können.

---

Summary N-Methyl--aminopropionic acid (MAP) containing resin binds Cu²⁺, UO₂ ²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ due to its coordinating tendencies, whereas Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺, Pb²⁺, Be²⁺, Tl⁺, NH₄ ⁺, alkalines, alkaline earths and rare earths are not retained. The selectivity can be increased by variation of pH, temperature and inert-salt background. Analytical applications have been shown by separations of binary mixtures. Sometimes these separations are simple and rapid filtration operations.

---

---

1. Mitteilung: Kühn, G., u. E. Hoyer: J. prakt. Chem. (im Druck).

---

Dem Direktor des Instituts für Anorganische Chemie, Herrn Prof. Dr. H. Holzapfel, gilt unser Dank für das entgegengebrachte Interesse und die Überlassung von Institutsmitteln.

---

Herrn Doz. Dr. R. Hering, Güstrow, danken wir für wertvolle Hinweise.     

New cobalt and iron pivalate complexes with 2,2′:6′,2″-terpyridine: synthesis, structure, and magnetic properties

The mononuclear complexes (η³-terpy)M(Piv)²·MeCN (M = Fe ⁱⁱ (3) and Co ⁱⁱ (4), and Piv is the pivalate anion) were synthesized by the reactions of polymeric iron(ii) and cobalt(ii) pivalates with 2,2′:6′,2″-terpyridine (terpy). The oxidation of compound 3 affords the pentanuclear heterospin iron(ii,iii) complex (η³-terpy)Fe₅(μ₄-O)(μ₃-OH)(μ-OH)₂(μ-Piv)₇(η¹-Piv)₂ (5). All compounds were characterized by X-ray diffraction. Dedicated to the 90th anniversary of the L. Ya. Karpov Institute of Physical Chemistry. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1186–1190, June, 2008.     

Octacyanomolybdate-doped-poly(4-vinylpyridine) ionomer film electrode for the electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-ascorbic acid

Poly(4-vinylpyridine) (PVP)-based anion exchange polymers are not studied as much as cation exchange polymers Nafion and Eastman Kodak AQ for electroanalytical applications. Similarly, octacyanomolybdate [Mo(CN)₈ ⁴⁻] has not been studied much as a redox mediator. This communication presents results from examinations of the behaviour of Mo(CN)₈ ⁴⁻-doped PVP ionomer film electrode to highlight the opportunities for realization of the application of this composite electrode for l-ascorbic acid (AH₂) estimation via electrocatalytic mediation in acidic medium. The modified electrodes were characterized by cyclic voltammetry and rotating disc electrode voltammetry. PVP coatings possess strong anion-binding capacity for Mo(CN)₈ ⁴⁻ mediator with an extraction coefficient of 990, and electrostatically cross-linked PVP films offer insignificant resistance to permeation of AH₂, facilitating a cross-exchange reaction between the substrate and the mediator in the entire film volume. They show effective electrocatalytic oxidation of AH₂, with the oxidation potential of AH₂ decreased by ∼200 mV in overpotential compared to that at bare electrode. Mo(CN)₈ ⁴⁻/PVP composite electrode does not respond to the more common interferents of l-ascorbic acid estimation even at high positive potentials. These and several other attractive potentialities of the modified electrode are demonstrated by direct determination of AH₂ in a commercial vitamin C tablet without any special treatment, with the value closely agreeing (±0.75%) with the reference method.     

Host-sensitized emission of LiInW2O8 wolframites: From red-Eu to white-Dy phosphors

The LiInW₂O₈:Eu³⁺, LiInW₂O₈:Dy³⁺ and LiInW₂O₈:Eu³⁺/Dy³⁺ phosphors were synthesized by solid-state reaction and their photoluminescence properties were studied. Under UV excitation, the LiInW₂O₈:Eu³⁺ phosphor exhibits an intense red emission whereas the LiInW₂O₈:Dy³⁺ and LiInW₂O₈:Dy³⁺/Eu³⁺ phosphors show a white emission. The WO₆ octahedra play a major role in the luminescence of the host lattice, characterized by a blue emission under UV excitation. The emission of activator ion results from an efficient energy transfer from the LiInW₂O₈ host lattice to the Eu³⁺ and Dy³⁺ ions. The LiIn_0.97Dy³⁺_0.03W₂O₈ and LiIn_0.965 Dy³⁺_0.03Eu³⁺_0.005W₂O₈ samples, optimized for white emission, are interesting candidates for solid-state lighting applications.     

2-Mercapto-benzothiazole as an analytical reagent

Summary The reagent 2-mercapto-benzothiazole quantitatively precipitates palladium at a PH 5.6 to 10.2. The red coloured compound, Pd(C₇H₄NS₂)₂, is diamagnetic and is stable up to a temperature of 388 C. Palladium is separated from alkalis, alkaline earths, Mg, Fe³⁺, Cr, Th, Zr, Ti, UO₂ ²⁺, Be, rare earths, Ce³⁺, Ce⁴⁺, Zn, Mn, Co, Ni, Pb, Bi, Sb³⁺, As³⁺, Sn⁴⁺, Tl+, Cu²⁺, Cd, Ir⁴⁺, Rh³⁺, Ru³⁺, Os⁴⁺, CrO₄ ^2–, MoO₄ ^2–, WO₄ ^2–, VO₃ ^–, PO₄ ^3– and AsO₄ ^3– at apH 6–8 in presence of EDTA and tartaric or citric acid. Besides Pb, Ag and Hg²⁺ are kept in solution with potassium iodide and Au in a limited quantity forms a soluble complex with thiosulphate. The palladium complex is either weighed after drying and determined gravimetrically or dissolved in an excess of cyanide and determined volumetrically by back titrating the latter with silver nitrate.     

Thermal decomposition of ammonium metavanadate doped with Fe,Co or Ni hydroxides

The thermal decomposition of pure ammonium metavanadate (AMV) and of AMV doped with Fe³⁺,Co²⁺ or Ni²⁺ ions was investigated by TG, DTA, IR and X-ray diffraction. The results obtained revealed that the presence of these dopants enhances the formation of the intermediate compounds V₂O₅ solid. Some of the V⁵⁺ ions of the V₂O₅ lattice seemed to be reduced to V⁴⁺ ions. The activation energies of the different decomposition stages for all samples were calculated. The doped solids calcined at 450°C were characterized by the determination ofSbet and by electrical conductivity measurements. The mechanisms by which these ions affect the properties of the solids produced are discussed in relation to the defect structure created by the doping process.

---

Zusammenfassung Mittels TG, DTA, IR und Röntgendiffraktion wurde die thermische Zersetzung von reinem Ammoniummetavanadat (AMV) und von AMV, versetzt mit Fe³⁺, Co²⁺ oder Ni²⁺, untersucht. Die Ergebnisse zeigen, daß die Bildung von Zwischenprodukten und festem V₂O₅ durch die Gegenwart der Zusätze begünstigt wird. Einige der V⁵⁺-Ionen des V₂O₅ Gitters scheinen zu V⁴⁺-Ionen reduziert zu sein. Für alle Proben wurde die Aktivierungsenergie der verschiedenen Zersetzungsschritte berechnet. Die versetzten Feststoffe, die bei 450°C kalziniert wurden, konnten durch die Bestimmung vonSbet und durch elektrische Leitfähigkeitsmessungen charakterisiert werden. Der Mechanismus, über welchen diese Ionen die Eigenschaften der Feststoffe beeinflussen, wurde hinsichtlich der hervorgerufenen Defektstruktur diskutiert.

     

Bismuthiol II as an analytical reagent

Summary Lead was estimated as Bismuthiol II complex of composition (C₈H₅N₂S₃)₂Pb by precipitating it from its chloride or nitrate solution in presence of a mineral acid, acetic acid, tartrate or cyanide. The estimation is quantitative up to a maximumph of about 6.5. The lead-Bismuthiol II complex is stable up to about 311° C and the conversion factor is 0.315. The method affords a complete separation of lead from alkalis and alkaline earths, Be²⁺, Mg²⁺, Zn²⁺, Mn²⁺, Co²⁺, Ni²⁺, Fe²⁺, Fe³⁺, Cr³⁺, Al³⁺, rare earths, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺, Pd²⁺, As³⁺, Sb³⁺, Cl^–, SO₄ ^2–, PO₄ ^3–, AsO₄ ^3–, MoO₄ ^2– and WO₄ ^2–. Among the sulphide group members Ag⁺, Au³⁺, Hg⁺, Hg²⁺, Tl⁺, Tl³⁺, Cd²⁺ and platinum metals, except Pd²⁺, interfere while oxidising agents decompose the excess reagent. Bi³⁺, Cu²⁺ and Sn²⁺, do not interfere up to a maximum limit of 30 mg, 50 mg, and 250 mg respectively.Part I: see Z. analyt. Chem. 154, 262 (1957).     

Analytical aspects of some organic acids Part III

Summary m-Phenylenedioxydiacetic acid gives a white precipitate with thorium even in the absence of an electrolyte which is quantitative up toph 4. Be²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Pb²⁺ and Mn²⁺ ions are removed by single precipitation and Al³⁺, UO₂ ²⁺ and trivalent cerite earth ions are removed by double precipitation. Sn²⁺, Sn⁴⁺ and Cr³⁺ ions interfere.Part II: See. Z. analyt. Chem.165, 343 (1959).     

Spacered dinuclear copper(<Emphasis Type="SmallCaps">II</Emphasis>) complexes with acyldihydrazones of aliphatic dicarboxylic acids and 2-hydroxy-5-nitroacetophenone

Dinuclear copper(II) complexes with acyldihydrazones of 2-hydroxy-5-nitroacetophenone (H₄L) of the composition Cu₂(Py)_xL·mEtOH were synthesized and characterized. In these complexes, the coordination polyhedra of the copper atoms are linked to each other by a polymethylene chain of different lengths, from one to five monomer units. The structure of the [Cu₂L·4Mrf] complex (Mrf is morpholine) based on acyldihydrazone of malonic acid was established by X-ray diffraction. The copper(II) atoms in this complex are [4+1]-coordinated and are spaced by 6.94 Å. At room temperature, the signal in the ESR spectra of solutions of the complexes based on acyldihydrazones of malonic, succinic, glutaric, and adipic acids has a seven-line hyperfine structure with the constant of (35.3–38.8)·10⁻⁴ cm⁻¹ (g = 2.109–2.112) due to exchange interactions between unpaired electrons and two equivalent copper nuclei. An increase in the length of the polymethylene chain to five monomer units hinders exchange interactions, and the ESR signal of the complex based on acyldihydrazone of pimelic acid has a four-line hyperfine structure with a _Cu = 72.7·10⁻⁴ cm⁻¹ typical of mononuclear copper(II) complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 229–234, February, 2007.     

Formation of Superoxochromium(III) by a Novel Mechanism

The reduction of chromate ion by l-cysteine in near-neutral aqueous solutions was studied by u.v.–vis spectroscopy. The rate constants for the formation, decomposition and redox degradation of a Cr^VI thioester intermediate (both in the absence and in the presence of dissolved O₂) were determined by the use of a nonlinear least-squares regression to fit the experimental data to a double-exponential integrated rate law. Superoxochromium(III), CrOO²⁺, could be observed as a long-lived intermediate by the use of u.v. difference spectroscopy (peaks at 238 and 292 nm). The effects of several reaction variables on the yield of the intermediate CrOO²⁺ were studied. A striking result was that the yield decreased as the concentration of dissolved O₂ increased. In the presence of phosphate buffer, the yield showed a maximum at pH 6.8. Formation of CrOO²⁺ was suppressed by the additives Mn²⁺, H₂O₂, d-ribose, 2-deoxy-d-ribose and a high concentration of Ce³⁺, whereas a low concentration of the latter enhanced its appearance. A novel mechanism for the formation of CrOO²⁺ from Cr^VI and l-cysteine (involving the intramolecular formation of an O–O bond) is proposed, and the possible routes for the decay of this intermediate are discussed. This novel mechanism might offer new insights into the redox chemistry of chromate ions.     

Synthesis of tapioca cellulose-based poly(hydroxamic acid) ligand for heavy metals removal from water

A graft copolymerization was performed using free radical initiating process to prepare the poly(methyl acrylate) grafted copolymer from the tapioca cellulose. The desired material is poly(hydroxamic acid) ligand, which is synthesized from poly(methyl acrylate) grafted cellulose using hydroximation reaction. The tapioca cellulose, grafted cellulose and poly(hydroxamic acid) ligand were characterized by Infrared Spectroscopy and Field Emission Scanning Electron Microscope. The adsorption capacity with copper was found to be good, 210 mg g^?1 with a faster adsorption rate (t_1/2 = 10.5 min). The adsorption capacities for other heavy metal ions were also found to be strong such as Fe³⁺, Cr³⁺, Co³⁺ and Ni²⁺ were 191, 182, 202 and 173 mg g^?1, respectively at pH 6. To predict the adsorption behavior, the heavy metal ions sorption onto ligand were well-fitted with the Langmuir isotherm model (R² > 0.99), which suggest that the cellulose-based adsorbent i.e., poly(hydroxamic acid) ligand surface is homogenous and monolayer. The reusability was checked by the sorption/desorption process for six cycles and the sorption and extraction efficiency in each cycle was determined. This new adsorbent can be reused in many cycles without any significant loss in its original removal performances.