On-chip magnetically actuated robot with ultrasonic vibration for single cell manipulations

This paper presents an innovative driving method for an on-chip robot actuated by permanent magnets in a microfluidic chip. A piezoelectric ceramic is applied to induce ultrasonic vibration to the microfluidic chip and the high-frequency vibration reduces the effective friction on the MMT significantly. As a result, we achieved 1.1 micrometre positioning accuracy of the microrobot, which is 100 times higher accuracy than without vibration. The response speed is also improved and the microrobot can be actuated with a speed of 5.5 mm s(-1) in 3 degrees of freedom. The novelty of the ultrasonic vibration appears in the output force as well. Contrary to the reduction of friction on the microrobot, the output force increased twice as much by the ultrasonic vibration. Using this high accuracy, high speed, and high power microrobot, swine oocyte manipulations are presented in a microfluidic chip.     

Microfluidic cell disruption system employing a magnetically actuated diaphragm

A microfluidic cell lysis chip equipped with a micromixer and SPE unit was developed and used for quantitative analysis of intracellular proteins. This miniaturized sample preparation system can be employed for any purpose where cell disruption is needed to obtain intracellular constituents for the subsequent analysis. This system comprises a magnetically actuated micromixer to disrupt cells, a hydrophobic valve to manipulate the cell lysate, and a packed porous polymerized monolith chamber for SPE and filtering debris from the cell lysate. Using recombinant Escherichia coli expressing intracellular enhanced green fluorescent protein (EGFP) and lipase as model bacteria, we optimized the cell disruption condition with respect to the lysis buffer composition, mixing time, and the frequency of the diaphragm in the micromixer, which was magnetically actuated by an external magnetic stirrer in the micromixer chamber. The lysed sample prepared under the optimal condition was purified by the packed SPE in the microfluidic chip. At a frequency of 1.96 Hz, the final cell lysis efficiency and relative fluorescence intensity of EGFP after the cell disruption process were greater than 90 and 94%, respectively. Thus, this microfluidic cell disruption chip can be used for the efficient lysis of cells for further analysis of intracellular contents in many applications.     

Dispersion of silica nano-particles in sol-gel hybrid resins for fabrication of multi-scale hybrid nanocomposite

Multi-scale hybrid nanocomposites containing both ∼15 nm silica colloids and ∼2 nm oligosiloxanes in a methacryl polymer matrix were newly designed and fabricated. Colloidal silica sols were dispersed in methacryl oligosiloxanes nano-hybrid resins synthesized by sol-gel reaction of methacryloxypropylmethoxysilane and diphenylsilanediol. On the basis of TEM and SANS analyses, it was confirmed that the silica colloids were compatibly dispersed and different sizes of colloidal silica and oligosiloxanes co-exist in the solutions. Multi-scale hybrid nanocomposites fabricated by UV and thermal curing with incorporation of silica colloids in the nano-hybrid materials show enhanced mechanical and thermal characteristics.     

Controlled wrinkling as a novel method for the fabrication of patterned surfaces

This article reviews recent applications of controlled wrinkling for creating structured and/or patterned interfaces, and its use in metrology. We discuss how wrinkles develop as a result of in-plane compression of thin sheets. As the wavelength of wrinkles is only dependent on elastic properties and thickness of the sheets, the phenomenon can be used in metrology for determination of elastic properties. The second aspect is its use for patterning and topographical structuring of surfaces. If mechanical properties and thickness are well controlled, wrinkle orientation and geometry can be tailored. Wavelengths between fractions of a micron and many micrometers are feasible. This process is based on a macroscopic deformation and upscaling to larger areas is possible which provides an attractive alternative to bottom-up or top-down approaches for surface patterning. We describe the formation of stable surface wrinkles in thin sheets of different materials having different surface chemistries, report on applications, and discuss the usefulness of wrinkles for building hierarchical structures.     

Simple method of fabrication of hydrophobic coatings for polyurethanes

The aim of this study was to develop a method of manufacturing versatile hydrophobic coatings for polymers. Authors present a simple technique of polyurethane (PU) surface modification with covalently attached silicones (PDMS) or fluorocarbons (PFC). Diisocyanates were applied as linker molecules. The obtained coatings were characterized using spectroscopic analysis (FTIR), scanning acoustic microscopy (SAM) and water contact angle measurements. FTIR analysis revealed high efficiency of grafting reaction. The results of contact angle measurement indicated significant increase of hydrophobicity — from 66° (unmodified PU) to 113° (PU grafted with PDMS) and 118° (PU grafted with PFC). Acoustic microscopy analysis confirmed satisfactory homogeneity and smoothness of the fabricated layers. In vitro cell tests revealed non-adherent properties of the surfaces. Both, MTT assay and fluorescence staining confirmed non-cytotoxicity of the coatings, which makes them potential candidates for use in biomedical applications.      

A control method for steering individual particles inside liquid droplets actuated by electrowetting

An algorithm is developed that allows steering of individual particles inside electrowetting systems by control of actuators already present in these systems. Particles are steered by creating time varying flow fields that carry the particles along their desired trajectories. Results are demonstrated using an experimentally validated model developed in ref. . We show that the current UCLA electro-wetting-on-dielectric (EWOD) system contains enough control authority to steer a single particle along arbitrary trajectories and to steer two particles, at once, along simple paths. Particle steering is limited by contact angle saturation and by the small number of actuators that are available to actuate the flow in practical electrowetting systems.     

Viable but nonculturable cells used in biosensor fabrication for long-term storage stability

In this paper, we first reported the viable but nonculturable (VBNC) cells used for fabricating biosensor. The organic-inorganic hybrid material composed of silica and the grafting copolymer of poly(vinyl alcohol) and 4-vinylpyridine (PVA-g-P(4-VP)) was used to immobilize microbial cells for biosensor fabrication. The VBNC cells were formed after the hybrid material dried, showing the cell walls were sacrificed. With the intracellular enzymes as core and the “sacrificed” cell walls as shell, the present VBNC cells maybe considered as a core/shell structure. The extracellular material worked as the scaffold for core/shell structure. The core/shell structure and the scaffold structure were demonstrated by single-cell level image analysis using confocal laser scanning microscopy (CLSM). The electrochemical method was adopted for further examining the enzyme activity of VBNC cells. The VBNC cells did not need nutrient treatment and other physicochemical factors for cell growth, which is a significant contribution for storing biosensor. A glucose-glutamic acid biosensor fabricated by the VBNC cells exhibited long-term storage stability for 100 days.     

Shortcut method for evaluation and design of a hybrid process for enantioseparations

Hybrid processes for enantioseparations have a considerable potential for reducing investment and operational costs. An example is the combination of simulated moving bed (SMB) chromatography and selective crystallisation. However, the design of integrated processes is a difficult task. A shortcut method is presented that can serve as a tool for design and estimation of the potential of such processes. The approach requires only limited experimental data and thus allows for systematic parameter studies. The method is based on the determination of the purity-performance characteristic of the SMB process and rigorous application of mass balances. The use of relative mass fluxes allows derivation of simple algebraic expressions for essential process parameters. The significant potential of combining SMB and crystallisation is demonstrated for the example of the separation of mandelic acid enantiomers.     

Design and fabrication of a micro-electrochemiluminescent cell for the study of ionic liquid-mediated electrochemiluminescence

In this paper, a novel micro-electrochemiluminescent (μ-ECL) cell with volume less than 100 μl was designed and fabricated. A special configuration of the three-electrode system, in which the counter and reference electrodes were integrated on a Perspex optical window while the working electrode was placed opposite to the optical window, has greatly decreased the amount of reagents required for ECL measurements. In the μ-ECL cell, large size working electrode was still applicable, which maintained ECL detect sensitivity while consuming a small amount of sample. In addition, the immobilization of the working electrode by a special adjusting device facilitated not only the detachment of the working electrode for treatment but also accurate orientation of the electrode, consequently improved ECL reproducibility. Finally, ECL of luminol in ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate was used to evaluate this μ-ECL cell.     

Thermoplastic elastomers for microfluidics: towards a high-throughput fabrication method of multilayered microfluidic devices

Multilayer soft lithography of polydimethylsiloxane (PDMS) is a well-known method for the fabrication of complex fluidic functions. With advantages and drawbacks, this technique allows fabrication of valves, pumps and micro-mixers. However, the process is inadequate for industrial applications. Here, we report a rapid prototyping technique for the fabrication of multilayer microfluidic devices, using a different and promising class of polymers. Using styrenic thermoplastic elastomers (TPE), we demonstrate a rapid technique for the fabrication and assembly of pneumatically driven valves in a multilayer microfluidic device made completely from thermoplastics. This material solution is transparent, biocompatible and as flexible as PDMS, and has high throughput thermoforming processing characteristics. We established a proof of principle for valving and mixing with three different grades of TPE using an SU-8 master mold. Specific viscoelastic properties of each grade allow us to report enhanced bonding capabilities from room temperature bonding to free pressure thermally assisted bonding. In terms of microfabrication, beyond classically embossing means, we demonstrate a high-throughput thermoforming method, where TPE molding experiments have been carried out without applied pressure and vacuum assistance within an overall cycle time of 180 s. The quality of the obtained thermoplastic systems show robust behavior and an opening/closing frequency of 5 Hz.     

Establishment and implications of a characterization method for magnetic nanoparticle using cell tracking velocimetry and magnetic susceptibility modified solutions

Magnetic micro and nanoparticles conjugated to affinity labels have become a significant, commercial reagent. It has been demonstrated that the performance of cell separation systems using magnetic labels is a function of the magnitude of the magnetic force that can be generated through labeling. This magnetic force is proportional to the number of magnetic particles bound to the cell, the magnetic energy gradient, and the particle-field interaction parameter. This particle-field interaction parameter, which is the product of the relative volumetric, magnetic susceptibility and the volume of the micro or nanoparticle, is a fundamental parameter which can be used to characterize the magnetic particles. An experimental technique is presented which measures the volumetric magnetic susceptibility of particles through the use of susceptibility modified solutions and an experimental instrument, Cell Tracking Velocimetry, CTV. Experimental studies were conducted on polystyrene microspheres alone and those bound to four different magnetic nanoparticles. The experimentally determined values of the magnetic susceptibility of the polystyrene microspheres are consistent with values found from literature. Consequently, magnetic susceptibility measurements of these polystyrene microspheres bound with the magnetic nanoparticles combined with particle size measurements using commercial dynamic light scattering instrument allowed estimates of the particle-field interaction parameter to be made for four commercial, magnetic nanoparticles. The value found for MACS beads is close to what is reported from an independent study. The values for MACS beads and Imag beads are found to agree with what is observed from experiments. Finally, an experimental demonstration of the impact that differences in this field interaction parameter has on the labeling of human lymphocytes is presented.     

A facile and environment-friendly method for fabrication of polymer brush

A novel environment-friendly system is proposed tofabricate polymer brush, which has the advantages including non-toxic and inexpensive initiator(eosin Y), visible-light exposure(λ= 515 nm), water medium and ambient environment. The experimental results from UV-Vis spectroscopy, AFM-based single molecule force spectroscopy(SMFS) and other measurements indicate thata polymer brush with a living nature is fabricated via free radical polymerization. This polymer brush may find applications incoatings, bio-interfaces and so forth.     

An effective method for the fabrication of few-layer-thick inorganic nanosheets

Intercalation and exfoliation of lithium: Few-layer-thick inorganic nanosheets (BN, NbSe(2) , WSe(2) , Sb(2) Se(3) , and Bi(2) Te(3) ) have been prepared from their layered bulk precursors by using a controllable electrochemical lithium intercalation process. The lithium intercalation conditions, such as cut-off voltage and discharge current, have been systematically studied and optimized to produce high-quality BN and NbSe(2) nanosheets.     

Rapid vapor-phase fabrication of organic-inorganic hybrid superlattices with monolayer precision

We report a new layer-by-layer growth method of self-assembled organic multilayer thin films based on gas-phase reactions. In the present molecular layer deposition (MLD) process, alkylsiloxane self-assembled multilayers (SAMs) were grown under vacuum by repeated sequential adsorptions of C=C-terminated alkylsilane and titanium hydroxide. The MLD method is a self- limiting layer-by-layer growth process, and is perfectly compatible with the atomic layer deposition (ALD) method. The SAMs films prepared exhibited good thermal and mechanical stability, and various unique electrical properties. The MLD method, combined with ALD, was applied to the preparation of organic-inorganic hybrid nanolaminate films in the ALD chamber. The organic-inorganic hybrid superlattices were then used as active mediums for two-terminal electrical bistable devices. The advantages of the MLD method with ALD include accurate control of film thickness, large-scale uniformity, highly conformal layering, sharp interfaces, and a vast library of possible materials. The MLD method with ALD is an ideal fabrication technique for various organic-inorganic hybrid superlattices.     

Direct facile approach to the fabrication of chitosan-gold hybrid nanospheres

Chitosan-gold hybrid nanospheres were prepared through a direct facile approach that utilized cross-linked composite nanospheres consisting of low-molecular-weight chitosan (LWCS) and ethylenediaminetetraacetic acid (EDTA) as a precursor reaction system. EDTA was employed not only to construct the counterion interaction-based composite nanospheres with the cationic chitosan but also as the reductant for subsequent in situ gold salt reduction within the LWCS-EDTA composite nanospheres. This approach elegantly ensured that each and every nanosphere was loaded with gold nanoparticles and no nonembedded free gold nanoparticles would exist in the dispersing medium. Moreover, becauseof the noncovalent interaction between LWCS and EDTA, the EDTA reductant can be easily removed from the cross-linked nanospheres, and "pure" chitosan-gold hybrid nanospheres can be obtained. The obtained chitosan-gold hybrid nanospheres were found to have a tunable size and good dispersing stability within a wide pH range. The embedded gold nanoparticles were in the range from several to several tens of nanometers, which may be useful for sensing and imaging. Morphology studies indicated that most of the loaded gold nanoparticles were located in the interior of the hybrid nanospheres. Taking into account the good biocompatibilities of LWCS, abundant functional (amino) groups in chitosan, and the mild preparation conditions, we find that the chitosan-gold hybrid nanospheres prepared here may have tremendous potential in advanced biomedical applications.     

Facile fabrication of polymer nanocapsules with cross-linked organic-inorganic hybrid walls

A facile method was developed for the fabrication of polymer nanocapsules with organic-inorganic hybrid walls and controllable morphologies from a cross-linkable polymer, poly[3-(trimethoxysilyl)propyl methacrylate] (PTMSPMA). With the combination of emulsion, hydrolysis, and condensation reaction as well as the internal phase separation, cross-linked PTMSPMA nanocapsules with classic hollow structures, collapsed hollow structures with Kippah, and multi-fold morphologies could be successfully obtained by simply mixing the toluene solution of PTMSPMA with water under vigorous stirring for 48 h at different temperatures. The hydrolysis and condensation of methoxysilyl groups resulted in the phase separation of PTMSPMA inside the toluene droplets and the migration of PTMSPMA to the interface of toluene and water. The cross-linking reaction of methoxysilyl groups further fixed the interfacial phase of PTMSPMA, leading the formation of PTMSPMA nanocapsules with robust cross-linked organic-inorganic hybrid walls. Such nanocapsules with robust cross-linking structures may find potential applications for the encapsulations of many functional species.     

Selected-control fabrication of multifunctional fluorescent-magnetic core-shell and yolk-shell hybrid nanostructures

The selected-control preparation of uniform core-shell and yolk-shell architectures, which combine the multiple functions of a superparamagnetic iron oxide (SPIO) core and europium-doped yttrium oxide (Y(2)O(3):Eu) shell in a single material with tunable fluorescence and magnetic properties, has been successfully achieved by controlling the heat-treatment conditions. Furthermore, the shell thickness and interior cavity of SPIO@Y(2)O(3):Eu core-shell and yolk-shell nanostructures can be precisely tuned. Importantly, as-prepared SPIO@Y(2)O(3):Eu yolk-shell nanocapsules (NCs) modified with amino groups as cancer-cell fluorescence imaging agents are also demonstrated. To the best of our knowledge, this is the first report on the selected-control fabrication of uniform SPIO@Y(2)O(3):Eu core-shell nanoparticles and yolk-shell NCs. The combined magnetic manipulation and optical monitoring of magnetic-fluorescent SPIO@Y(2)O(3):Eu yolk-shell NCs will open up many exciting opportunities in dual imaging for targeted delivery and thermal therapy.