Synthesis and structural characterization of two-coordinate low-valent 14-group metal complexes bearing bulky bis(amido)silane ligands

A series of germylene, stannylene and plumbylene complexes [η(2)(N,N)-Me(2)Si(DippN)(2)Ge:] (3a), [η(2)(N,N)-Ph(2)Si(DippN)(2)Ge:] (3b), [η(2)(N,N)-Me(2)Si(DippN)(2)Sn:] (4), [η(2)(N,N)-Me(2)Si(DippN)(2)Pb:](2) (5a), and [η(2)(N,N)-Ph(2)Si(DippN)(2)Pb:] (5b) (Dipp = 2,6-iPr(2)C(6)H(3)) bearing bulky bis(amido)silane ligands were readily prepared either by the transamination of M[N(SiMe(3))(2)](2) (M = Sn, Pb) and [Me(2)Si(DippNH)(2)] or by the metathesis reaction of bislithium bis(amido)silane [η(1)(N),η(1)(N)-R(2)Si(DippNLi)(2)] (R = Me, Ph) with the corresponding metal halides GeCl(2)(dioxane), SnCl(2), and PbCl(2), respectively. Preliminary atom-transfer chemistry involving [η(2)(N,N)-Me(2)Si(DippN)(2)Ge:] (3a) with oxygen yielded a dimeric oxo-bridged germanium complex [η(2)(N,N)-Me(2)Si(DippN)(2)Ge(μ-O)](2) (6). All complexes were characterized by (1)H, (13)C, (119)Sn NMR, IR, and elemental analysis. X-ray single crystal diffraction analysis revealed that the metal centres in 3b, 4, and 5b are sterically protected to prevent interaction between the metal centre and the nitrogen donors of adjacent molecules while complex 5a shows a dimeric feature with a strong intermolecular Pb···N interaction.     

Synthesis and structural characterization of alkaline-earth-metal bis(amido)silane and lithium oxobis(aminolato)silane complexes

Several of alkaline-earth-metal complexes [(η(2):η(2):μ(N):μ(N)-Li)(+)](2)[{η(2)-Me(2)Si(DippN)(2)}(2)Mg](2-) (4), [η(2)(N,N)-Me(2)Si(DippN)(2)Ca·3THF] (5), [η(2)(N,N)-Me(2)Si(DippN)(2)Sr·THF] (6), and [η(2)(N,N)-Me(2)Si(DippN)(2)Ba·4THF] (7) of a bulky bis(amido)silane ligand were readily prepared by the metathesis reaction of alkali-metal bis(amido)silane [Me(2)Si(DippNLi)(2)] (Dipp = 2,6-i-Pr(2)C(6)H(3)) and alkaline-earth-metal halides MX(2) (M = Mg, X = Br; M = Ca, Sr, Ba, X = I). Alternatively, compounds 5-7 were synthesized either by transamination of M[N(SiMe(3))(2)](2)·2THF (M = Ca, Sr, Ba) and [Me(2)Si(DippNH)(2)] or by transmetalation of Sn[N(SiMe(3))(2)](2), [Me(2)Si(DippNH)(2)], and metallic calcium, strontium, and barium in situ. The metathesis reaction of dilithium bis(amido)silane [Me(2)Si(DippNLi)(2)] and magnesium bromide in the presence of oxygen afforded, however, an unusual lithium oxo polyhedral complex {[(DippN(Me(2)Si)(2))(μ-O)(Me(2)Si)](2)(μ-Br)(2)[(μ(3)-Li)·THF](4)(μ(4)-O)(4)(μ(3)-Li)(2)} (8) with a square-basket-shaped core Li(6)Br(2)O(4) bearing a bis(aminolato)silane ligand. All complexes were characterized using (1)H, (13)C, and (7)Li NMR and IR spectroscopy, in addition to X-ray crystallography.     

Organolanthanide-catalyzed intramolecular hydroamination/cyclization of amines tethered to 1,2-disubstituted alkenes

[reaction: see text] This contribution reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amines tethered to 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines by using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]NdCH(TMS)(2), [Et(2)Si(eta(5)-Me(4)C(5))(eta(5)-C(5)H(4))]NdCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)()BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and in good to excellent yield.     

Carbophosphazene-supported ligand systems containing pyrazole/guanidine coordinating groups

Carbophosphazene-based coordination ligands [{NC(NMe(2))}(2){NP(3,5-Me(2)Pz)(2)}] (1), [{NC(NEt)(2)}{NC(3,5-Me(2)Pz)}{NP(3,5-Me(2)Pz)(2)}] (2), [NC(3,5-Me(2)Pz)](2)[NP(3,5-Me(2)Pz)(2)] (3), [{NCCl}(2){NP(NC(NMe(2))(2))(2)}] (4), and [{NC(p-OC(5)H(4)N)}(2){NP(NC(NMe(2))(2))(2)}] (5) were synthesized and structurally characterized. In these compounds, the six-membered C(2)N(3)P ring is perfectly planar. The reaction of 1 with CuCl(2) afforded [{NC(NMe(2))}(2){NHP(O)(3,5-Me(2)Pz)}·{Cu(3,5-Me(2)PzH)(2)(Cl)}][Cl] (6). The ligand binds to Cu(II) utilizing the geminal [P(O)(3,5-Me(2)Pz)] coordinating unit. Similarly, the reaction of 2 with PdCl(2) afforded, after a metal-assisted P-N hydrolysis, [{NC(NEt)(2)}{NC(3,5-Me(2)Pz)}{NP(O)(3,5-Me(2)Pz)}·{Pd(3,5-Me(2)PzH)(Cl)}] (7). In the latter, the [P(O)(3,5-Me(2)Pz)] unit does not coordinate; in this instance, the Pd(II) is bound by a ring nitrogen atom and a carbon-tethered pyrazolyl nitrogen atom. The reaction of 3 with PdCl(2) also results in P-N bond hydrolysis affording [{NC(3,5-Me(2)Pz)(2)}{NP(O)(3,5-Me(2)Pz)}{Pd(Cl)}] (8). In contrast to 7, however, in 8, the Pd(II) elicits a nongeminal η(3) coordination from the ligand involving two carbon-tethered pyrazolyl groups and a ring nitrogen atom. Metalated products could not be isolated in the reaction of 3 with K(2)PtCl(4). Instead, a P-O-P bridged carbodiphosphazane dimer, [{NC(3,5-Me(2)Pz)NHC(3,5-Me(2)Pz)}{NP(O)}](2) (9), was isolated as the major product. Finally, the reaction of 5 with PdCl(2) resulted in [{NC(OC(5)H(4)N)}(2){NP(NC(NMe(2))(2))(2)}·{PdCl(2)}] (10). In the latter, the exocyclic P-N bonds are quite robust and are involved in binding to the metal ion. Compounds 6-10 have been characterized by a variety of techniques including X-ray crystallography. In all of the compounds, the bond parameters of the inorganic heterocyclic rings are affected by metalation.     

Synthesis and structural characterization of novel neutral hexacoordinate silicon(IV) complexes with SiO2N4 skeletons containing cyanato-N or thiocyanato-N ligands

A series of novel hexacoordinate silicon(IV) complexes with an SiO2N4 skeleton (compounds (OC-6-12)-3, (OC-6-12)-4, (OC-6-12)-5, (OC-6-12)-6, and (OC-6-2'2)-7) were synthesized, starting from Si(NCO)4 or Si(NCS)4. These compounds contain (i) two bidentate O,N-chelate ligands (or one tetradentate O,N,N,O-chelate ligand) derived from 4-aminopent-3-en-2-ones of the formula type Me-C(NRH)=CH-C(O)-Me (R = organyl) and (ii) two monodentate cyanato-N or thiocyanato-N ligands. Formally, the bidentate singly negatively charged O,N-chelate ligands (tetradentate 2-fold negatively charged O,N,N,O-chelate ligand) behave as ligands of the imino-enolato type. In addition, the adduct trans-8 was synthesized by reaction of Si(NCS)4 with 2 molar equiv of Me-C(Ni-PrH)=CH-C(O)-Me. This hexacoordinate silicon(IV) complex contains (i) four monodentate thiocyanato-N ligands and (ii) two neutral monodentate ligands of the iminio-enolato type. All compounds synthesized were structurally characterized by single-crystal X-ray diffraction and solid-state and solution NMR spectroscopy. To get more information about the stereochemistry of these compounds, the experimental investigations were complemented by computational studies.     

Highly efficient hydrophosphonylation of aldehydes and unactivated ketones catalyzed by methylene-linked pyrrolyl rare earth metal amido complexes

A series of rare earth metal amido complexes bearing methylene-linked pyrrolyl-amido ligands were prepared through silylamine elimination reactions and displayed high catalytic activities in hydrophosphonylations of aldehydes and unactivated ketones under solvent-free conditions for liquid substrates. Treatment of [(Me(3)Si)(2)N](3)Ln(μ-Cl)Li(THF)(3) with 2-(2,6-Me(2)C(6)H(3)NHCH(2))C(4)H(3)NH (1, 1 equiv) in toluene afforded the corresponding trivalent rare earth metal amides of formula {(μ-η(5):η(1)):η(1)-2-[(2,6-Me(2)C(6)H(3))NCH(2)](C(4)H(3)N)LnN(SiMe(3))(2)}(2) [Ln=Y (2), Nd (3), Sm (4), Dy (5), Yb (6)] in moderate to good yields. All compounds were fully characterized by spectroscopic methods and elemental analyses. The yttrium complex was also characterized by (1)H NMR spectroscopic analyses. The structures of complexes 2, 3, 4, and 6 were determined by single-crystal X-ray analyses. Study of the catalytic activities of the complexes showed that these rare earth metal amido complexes were excellent catalysts for hydrophosphonylations of aldehydes and unactivated ketones. The catalyzed reactions between diethyl phosphite and aldehydes in the presence of the rare earth metal amido complexes (0.1 mol%) afforded the products in high yields (up to 99%) at room temperature in short times of 5 to 10 min. Furthermore, the catalytic addition of diethyl phosphite to unactivated ketones also afforded the products in high yields of up to 99% with employment of low loadings (0.1 to 0.5 mol%) of the rare earth metal amido complexes at room temperature in short times of 20 min. The system works well for a wide range of unactivated aliphatic, aromatic or heteroaromatic ketones, especially for substituted benzophenones, giving the corresponding α-hydroxy diaryl phosphonates in moderate to high yields.     

The nature of unsupported uranium-ruthenium bonds: a combined experimental and theoretical study

Four new uranium-ruthenium complexes, [(Tren(TMS))URu(η(5)-C(5)H(5))(CO)(2)] (9), [(Tren(DMSB))URu(η(5)-C(5)H(5))(CO)(2)] (10), [(Ts(Tolyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (11), and [(Ts(Xylyl))(THF)URu(η(5)-C(5)H(5))(CO)(2)] (12) [Tren(TMS)=N(CH(2)CH(2)NSiMe(3))(3); Tren(DMSB)=N(CH(2)CH(2)NSiMe(2)tBu)(3)]; Ts(Tolyl)=HC(SiMe(2)NC(6)H(4)-4-Me)(3); Ts(Xylyl)=HC(SiMe(2)NC(6)H(3)-3,5-Me(2))(3)], were prepared by a salt-elimination strategy. Structural, spectroscopic, and computational analyses of 9-12 shows: i) the formation of unsupported uranium-ruthenium bonds with no isocarbonyl linkages in the solid state; ii) ruthenium-carbonyl backbonding in the [Ru(η(5)-C(5)H(5))(CO)(2)](-) ions that is tempered by polarization of charge within the ruthenium fragments towards uranium; iii) closed-shell uranium-ruthenium interactions that can be classified as predominantly ionic with little covalent character. Comparison of the calculated U-Ru bond interaction energies (BIEs) of 9-12 with the BIE of [(η(5)-C(5)H(5))(3)URu(η(5)-C(5)H(5))(CO)(2)], for which an experimentally determined U-Ru bond disruption enthalpy (BDE) has been reported, suggests BDEs of approximately 150 kJ mol(-1) for 9-12.     

Organolanthanide-catalyzed intramolecular hydroamination/cyclization/bicyclization of sterically encumbered substrates. Scope, selectivity, and catalyst thermal stability for amine-tethered unactivated 1,2-disubstituted alkenes

This paper reports the organolanthanide-catalyzed intramolecular hydroamination/cyclization of amine-tethered unactivated 1,2-disubstituted alkenes to afford the corresponding mono- and disubstituted pyrrolidines and piperidines using coordinatively unsaturated complexes of the type (eta(5)-Me(5)C(5))(2)LnCH(TMS)(2) (Ln = La, Sm), [Me(2)Si(eta(5)-Me(4)C(5))(2)]SmCH(TMS)(2), and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) (Ln = Sm, Y, Yb, Lu; E = N, CH) as precatalysts. [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) mediates intramolecular hydroamination/cyclization of sterically demanding amino-olefins to afford disubstituted pyrrolidines in high diastereoselectivity (trans/cis = 16/1) and good to excellent yield. In addition, chiral C(1)-symmetric organolanthanide catalysts of the type [Me(2)Si(OHF)(CpR*)]LnN(TMS)(2) (OHF = eta(5)-octahydrofluorenyl; Cp = eta(5)-C(5)H(3); R* = (-)-menthyl; Ln = Sm, Y), and [Me(2)Si(eta(5)-Me(4)C(5))(CpR*)]SmN(TMS)(2) (Cp = eta(5)-H(3)C(5); R* = (-)-menthyl) mediate asymmetric intramolecular hydroamination/cyclization of amines bearing internal olefins and afford chiral 2-substituted piperidine and pyrrolidine in enantioselectivities as high as 84:16 er at 60 degrees C. The substrate of the structure NH(2)CH(2)CMe(2)CH(2)CH=CH(CH(2))(2)CH=CH(2) is regiospecifically bicyclized by [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]LnE(TMS)(2) to the corresponding indolizidine skeleton in good yield and high diastereoselectivity. Thermolysis of (eta(5)-Me(5)C(5))(2)LaCH(TMS)(2) in cyclohexane-d(12) at 120 degrees C rapidly releases CH(2)(SiMe(3))(2) and leads to possible formation of fulvene (eta(6)-Me(4)C(5)CH(2)-) species. The thermolysis product readily reverts to active catalysts upon protonolysis by substrate and exhibits the same catalytic activity as the (eta(5),eta(1)-Me(5)C(5))(2)LaCH(TMS)(2) precatalyst at 120 degrees C in the cyclization of cis-2,2-dimethylhept-5-enylamine. Catalytically-active lanthanide-amido complexes (eta(5)-Me(5)C(5))(2)La(NHR)(NH(2)R)(n) and [Me(2)Si(eta(5)-Me(4)C(5))((t)BuN)]Sm(NHR)(NH(2)R)(n) are shown to be thermally robust species.     

Access to a stable Si2N2 four-membered ring with non-Kekulé singlet biradical character from a disilyne

The reactions of 1,1,4,4-tetrakis[bis(trimethylsilyl)methyl]-1,4-diisopropyltetrasila-2-yne 1 with an equivalent amount of trans- and cis-3,3',5,5'-tetramethylazobenzenes produced a Si(2)N(2) four-membered ring biradicaloid [RSi(μ-NAr)(2)SiR] 2 (R = Si(i)Pr[CH(SiMe(3))(2)](2), Ar = 3,5-Me(2)C(6)H(3)), which was isolated as air- and moisture-sensitive dark purple crystals. Compound 2 displays no EPR signal, and the molecular structure of 2 was characterized by NMR spectroscopy and X-ray crystallography, revealing that 2 has a planar centrosymmetric Si(2)N(2) four-membered ring. The Si1-Si1' distance is 2.63380(9) ?, and there is no bond interaction between the Si1 and Si1' atoms of 2. The reactions of 2 with methanol and carbon tetrachloride show that 2 has both closed-shell and radical-type reactivity.     

Different Reactivity of As4 towards Disilenes and Silylenes

The activation of yellow arsenic is possible with the silylene [PhC(NtBu)₂SiN(SiMe₃)₂] ( 1 ) and the disilene [(Me₃Si)₂N(η¹-Me₅C₅)Si=Si(η¹-Me₅C₅)N(SiMe₃)₂] ( 3 ). The reaction of As₄ with 1 leads to the unprecedented As₁₀ cage compound [(LSiN(SiMe₃)₂)₃As₁₀] ( 2 ; L=PhC(NtBu)₂) with an As₇ nortricyclane core stabilized by arsasilene moieties containing silicon(II)bis(trimethylsilyl)amide substituents. In contrast, the compound [Cp*{(SiMe₃)₂N}SiAs]₂ ( 4 ) containing a butterfly-like diarsadisilabicyclo[1.1.0]butane unit is formed by the reaction of As₄ with the disilene 3 . Both compounds were characterized by single-crystal X-ray diffraction analysis, NMR spectroscopy, and mass spectrometry. The reaction outcomes demonstrate the different reaction behavior of yellow arsenic (As₄) compared to white phosphorus (P₄) in the reactions with the corresponding silylenes and disilenes.     

Functionalization of hafnium oxamidide complexes prepared from CO-induced N2 cleavage

Functionalization of the nitrogen atoms in the hafnocene oxamidide complexes [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf](2)(N(2)C(2)O(2)) and [(η(5)-C(5)Me(4)H)(2)Hf](2)(N(2)C(2)O(2)), prepared from CO-induced N(2) bond cleavage, was explored by cycloaddition and by formal 1,2-addition chemistry. The ansa-hafnocene variant, [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf](2)(N(2)C(2)O(2)), undergoes facile cycloaddition with heterocumulenes such as (t)BuNCO and CO(2) to form new N-C and Hf-O bonds. Both products were crystallographically characterized, and the latter reaction demonstrates that an organic ligand can be synthesized from three abundant and often inert small molecules: N(2), CO, and CO(2). Treatment of [Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf](2)(N(2)C(2)O(2)) with I(2) yielded the monomeric iodohafnocene isocyanate, Me(2)Si(η(5)-C(5)Me(4))(η(5)-C(5)H(3)-3-(t)Bu)Hf(I)(NCO), demonstrating that C-C bond formation is reversible. Alkylation of the oxamidide ligand in [(η(5)-C(5)Me(4)H)(2)Hf](2)(N(2)C(2)O(2)) was explored due to the high symmetry of the complex. A host of sequential 1,2-addition reactions with various alkyl halides was discovered and both N- and N,N'-alkylated products were obtained. Treatment with Br?nsted acids such as HCl or ethanol liberates the free oxamides, H(R(1))NC(O)C(O)N(R(2))H, which are useful precursors for N,N'-diamines, N-heterocyclic carbenes, and other heterocycles. Oxamidide functionalization in [(η(5)-C(5)Me(4)H)(2)Hf](2)(N(2)C(2)O(2)) was also accomplished with silanes and terminal alkynes, resulting in additional N-Si and N-H bond formation, respectively.     

C-Cl bond activation of ortho-chlorinated benzamides by nickel and cobalt compounds supported with phosphine ligands

The C-Cl bonds of ortho-chlorinated benzamides Cl-ortho-C(6)H(4)C(=O)NHR (R = Me (1), nBu (2), Ph (3), (4-Me)Ph (4) and (4-Cl)Ph (5)) were successfully activated by tetrakis(trimethylphosphine)nickel(0) and tetrakis(trimethylphosphine)cobalt(0). The four-coordinate nickel(II) chloride complexes trans-[(C(6)H(4)C([double bond, length as m-dash]O)NHR)Ni(PMe(3))(2)Cl] (R = Me (6), nBu (7), Ph (8) and (4-Me)Ph (9)) as C-Cl bond activation products were obtained without coordination of the amide groups. In the case of 2, the ionic penta-coordinate cobalt(II) chloride [(C(6)H(4)C(=O)NHnBu)Co(PMe(3))(3)]Cl (10) with the [C(phenyl), O(amide)]-chelate coordination as the C-Cl bond activation product was isolated. Under similar reaction conditions, for the benzamides 3-5, hexa-coordinate bis-chelate cobalt(III) complexes (C(6)H(4)C(=O)NHR)Co(Cl-ortho-C(6)H(4)C(=O)NR)(PMe(3))(2) (11-13) were obtained via the reaction with [Co(PMe(3))(4)]. Complexes 11-13 have both a five-membered [C,N]-coordinate chelate ring and a four-membered [N,O]-coordinate chelate ring with two trimethyphosphine ligands in the axial positions. Phosphonium salts [Me(3)P(+)-ortho-C(6)H(4)C(=O)NHR]Cl(-) (R = Ph (14) and (4-Me)Ph (15)) were isolated by reaction of complexes 8 and 9 as a starting material under 1 bar of CO at room temperature. The crystal and molecular structures of complexes 6, 7 and 9-12 were determined by single-crystal X-ray diffraction.     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

From a cycloheptatrienylzirconium allyl complex to a cycloheptatrienylzirconium imidazolin-2-iminato "pogo stick" complex with imido-type reactivity

The reaction of the cycloheptatrienylzirconium half-sandwich complex [(η(7)-C(7)H(7))ZrCl(tmeda)] (1) (tmeda = N,N,N',N'-tetramethylethylenediamine) with Li(Im(Dipp)N), generated from bis(2,6-diisopropylphenyl)imidazolin-2-imine (Im(Dipp)NH) with methyllithium, yields the imidazolin-2-iminato complex [(η(7)-C(7)H(7))Zr(Im(Dipp)N)(tmeda)] (2). The corresponding tmeda-free complex [(η(7)-C(7)H(7))Zr(Im(Dipp)N)] (5) can be synthesized via the 1,3-bis(trimethylsilyl)allyl complex [(η(7)-C(7)H(7))Zr{η(3)-C(3)H(3)(TMS)(2)}(THF)] (3; TMS = SiMe(3)), which undergoes an acid-base reaction with Im(Dipp)NH to form 5 and 1,3-bis(trimethylsilyl)propene. 5 exhibits an unusual one-legged piano stool ("pogo stick") geometry with a particularly short Zr-N bond of 1.997(2) ?. Addition of 2,6-dimethylphenyl or tert-butyl isocyanide affords the complexes [(η(7)-C(7)H(7))Zr(Im(Dipp)N)(CNR)] (R = o-Xy, 6; R = t-Bu, 7), while the reaction with 2,6-dimethylphenyl isocyanate results in a [2 + 2] cycloaddition to form the ureato(1-) complex [(η(7)-C(7)H(7))Zr{Im(Dipp)N(C═O)N-o-Xy}] (8). 5 can also act as an initiator for the ring-opening polymerization of ε-caprolactone. These reactivity patterns together with density functional theory calculations reveal a marked similarity of the bonding in imidazolin-2-iminato and conventional imido transition-metal complexes.     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.     

Substituent size effects in lewis base induced reductions in organolanthanide chemistry

The reaction of the tripodal 1,3,5-trialkyl-1,3,5-triazacyclohexanes (L=cyclo-[N(R)CH(2)](3) , R=Et, iPr, tBu), with [Sm(AlMe(4))(3)] resulted in the formation of divalent samarium complexes of the constitution [{L(n)Sm(AlMe(4))(2)}(m)] (n, m=1,2) under ethane extrusion. These compounds were characterised by single-crystal X-ray diffraction and elemental analyses. Simultaneous occurrence of Lewis base induced reduction and C--activation reactions is observed. The ratio of products depends on the bulkiness of the N-alkyl substituent R. The reaction of [Sm(AlMe(4))(3)] with 1,3,5-triisopropyl-1,3,5-triazacyclohexane (TiPTAC) in benzene afforded the inversion-symmetric dimer [{(TiPTAC)(η(3)-AlMe(4))Sm}(2)(μ(2)-AlMe(4))(2)], whereas in toluene the pseudo-samarocene [(TiPTAC)(2)Sm(η(1)-AlMe(4))(2)] was obtained. The trisaluminate [(TiPTAC)Sm{(μ(2)-Me)(Me(2) l)}(2)(μ(3)-CH(2))(2)AlMe(2))] was found to be the C--activation product. In the case of the particular bulky 1,3,5-tri-tert-butyl-1,3,5-triazacyclohexane (TtBuTAC), the reaction led to the formation of the dimeric [{(TtBuTAC)(η(3)-AlMe(4))Sm}(2)(μ(2)-AlMe(4))(2)] even in toluene in comparably high yields. The decrease of the steric demand to ethyl groups in 1,3,5-triethyl-1,3,5-triazacyclohexane (TETAC) afforded the samarocene-like [(TETAC)(2) Sm(η(1)-AlMe(4))(2)] in lower yields. The resulting divalent samarium compounds are found to be stable with respect to reagents like dinitrogen, conjugated olefins and polycyclic aromatic systems.     

White phosphorus activation at a metal-phosphorus triple bond: a new route to cyclo-triphosphorus or cyclo-pentaphosphorus complexes of niobium

The Nb-P triple bond in [P≡Nb(N[Np]Ar)(3)](-) (Np = CH(2)(t)Bu; Ar = 3,5-Me(2)C(6)H(3)) has produced the first case of P(4) activation by a metal-ligand multiple bond. Treatment of P(4) with the sodium salt of the niobium phosphide complex in weakly coordinating solvents led to formation of the cyclo-P(3) anion [(P(3))Nb(N[Np]Ar)(3)](-). Treatment in tetrahydrofuran (THF) led to the formation of a cyclo-P(5) anion [(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)](-), which represents a rare example of a substituted pentaphosphacyclopentadienyl ligand. The P(4) activation pathway was shown to depend on the dimer-monomer equilibrium of the niobium phosphide reagent, which, in turn, depends on the solvent used for the reaction. The pathway leading to the cyclo-P(3) product was shown to require a 2:1 ratio of the phosphide anion to P(4), while the cyclo-P(5) formation requires a 1:1 ratio. The cyclo-P(3) salt has been isolated in 56% yield as orange crystals of the [Na(THF)](2)[(P(3))Nb(N[Np]Ar)(3)](2) dimer or in 83% yield as an orange powder of [Na(12-crown-4)(2)][(P(3))Nb(N[Np]Ar)(3)]. A solid-state X-ray diffraction experiment on the former salt revealed that each Nb-P(3) unit exhibits pseudo-C(3) symmetry, while (31)P NMR spectroscopy showed a sharp signal at -223 ppm that splits into a doublet-triplet pair below -50 °C. It was demonstrated that this salt can serve as a P(3)(3-) source upon treatment with AsCl(3), albeit with modest yield of AsP(3). The cyclo-P(5) salt was isolated in 71% yield and structurally characterized from red crystals of [Na(THF)(6)][(Ar[Np]N)(η(4)-P(5))Nb(N[Np]Ar)(2)]. The anion in this salt can be interpreted as the product of trapping of an intermediate pentaphosphacycplopentadienyl structure through migration of one anilide ligand onto the P(5) ring. The W(CO)(5)-capped cyclo-P(3) salt was also isolated in 60% yield as [Na(THF)][(OC)(5)W(P(3))Nb(N[Np]Ar)(3)] from the activation of 0.5 equiv of P(4) with the sodium salt of the tungsten pentacarbonyl adduct of the niobium phosphide anion.     

Solid-state structure and solution behavior of eight-coordinate Sm(III) poly(pyrazolyl)borate compounds

[Sm(Tp(Me2)(2)(kappa(2)-S(2)CNR(2))] compounds (R = Et (1), Me (2); Tp(Me2) = HB(3,5-Me2pz)(3)) have been isolated from reaction of (R(2)NC(S)S)(2) with 2 equiv of [Sm(Tp(Me2)(2)]. Reductive cleavage of 2,2'-dipyridyl disulfide or 2,2'-dipyridyl diselenide by [Sm(Tp(Me2)(2)] afforded good yields of [Sm(Tp(Me2)(2)(kappa(2)-Y)] compounds (Y = 2-SC(5)H(4)N (3), 2-SeC(5)H(4)N (4)). 4 is the first selenopyridine complex of an f-block element. Sm(Tp(Me2)(2)(2-OC(5)H(4)N) (5) has been synthesized by salt metathesis of [Sm(Tp(Me2)(2)Cl] with the sodium salt of the 2-hydroxypyridine. The solid-state structures of 1, 3, 4, and 5 were determined by single-crystal X-ray diffraction analysis and revealed that the compounds are all eight-coordinate with dodecahedral geometry. The samarium atoms are bound in tridentate fashion to two pyrazolylborate ligands and in bidentate fashion by the third ligand. The solution behavior of the compounds was studied by (1)H NMR techniques. (1)H-(1)H exchange spectroscopy experiments give evidence for two distinct dynamic regimes occurring in solution.     

Mono and dinuclear arene ruthenium(II) triazoles by 1,3-dipolar cycloadditions to a coordinated azide in ruthenium(II) compounds

The dimeric η(6)-hexamethylbenzene ruthenium(II) triazole compounds of formulation [{(η(6)-C(6)Me(6))Ru(N(3)C(2)(CO(2)R)(2))}(2)(μC(2)O(4))] have been synthesized by 1,3-diploar cycloadditions of coordinated azido compound [{(η(6)-C(6)Me(6))Ru(L(1))N(3)}] (1) with substituted acetylene, RO(2)CC(2)CO(2)R via unexpected oxidation of the coordinated ligand to oxalate (where; L(1) = 5-hydroxy-2-(hydroxymethyl)-4-pyrone; R = Me, 3 or Et, 4). In contrast, a similar 1,3-dipolar cycloaddition reaction of [{(η(6)-C(6)Me(6))Ru(L(2))N(3)}] (2) (where; L(2) = tropolone) with acetylene yielded the monomeric triazole compound [(η(6)-C(6)Me(6))Ru(L(2)){N(3)C(2)(CO(2)R)(2)}] (where; R = Me, 5; Et, 6). The compounds were characterized by spectroscopy and the structures of representative compounds 4 and 6 have been determined by single crystal X-ray diffraction. The two ruthenium centres in the compound 4, are linked by a tetra-dentate oxalate group. Both compounds, 4 and 6, crystallized in a triclinic space group P-1.     

Coordination chemistry of Si5Cl10 with organocyanides

Organocyanides readily coordinate to decachlorocyclopentasilane (Si(5)Cl(10)) to form "inverse sandwich" compounds 1-3 with a planar Si(5) ring. The products were isolated in high yield and fully characterized by elemental analysis, multinuclear NMR, IR and UV-Vis spectroscopy. While the spectroscopic data suggests the presence of a fairly weak interaction between the Si(5) ring and the coordinative organocyanide ligands, single-crystal X-ray diffraction studies of compound 1 and 2 show μ(5)-coordination of the apical cyano nitrogen atoms to the silicon atoms in the Si(5) ring. Distances between silicon atoms and nitrogen atoms are significantly shorter than a Si-N van der Waals bond but longer than the sum of their covalent radii. Multiple interactions between the cyano groups and equatorial Cl atoms, and intermolecular interactions were observed in the solid state for both compounds 1 and 2.