非晶态SiO2的高温高压转变研究

利用金刚石对顶砧高压装置和激光双面加热技术, 以经700°C热处理后的吉林长白山硅藻土作为非晶态SiO₂样品,在0—4GPa, 1000—1300K温压条件下开展同步辐射X射线衍射原位测试(EDXD方法), 研究非晶态SiO₂在高温高压条件下的结晶转变方式. 测试结果表明, 在0.8—2.4GPa, 1000—1300K温压条件下, 非晶态SiO₂转变成α-石英而非β-石英或方石英, 其结晶温度较常压下非晶态SiO₂晶化所需温度明显较低, 表明压力有利于降低非晶态SiO₂转变的活化能, 并与常压下的结晶产物不同. 在3—4GPa, 1300K温压条件下, 非晶态SiO₂和石英均转变成了柯石英.     

焙烧温度对SiO2负载的Co3O4纳米粒子表面氧缺陷浓度和CO氧化催化性能的影响

以传统的浸渍法,在不同焙烧温度下制备了用于CO氧化反应的Co₃O₄/SiO₂催化剂．通过激光拉曼光谱(Raman)、X射线光电子能谱(XPS)、X射线衍射(XRD)、程序升温还原(TPR)和X射线吸收精细结构谱(XAFS)表征了该系列催化剂的结构．在所有的催化剂中,XRD和Raman光谱都只检测到了Co₃O₄晶相的存在．与Co₃O₄体相相比,XPS结果表明在200 oC焙烧的(Co₃O₄(200)/SiO₂)催化剂中Co₃O₄表面上存在着过量的Co²⁺．与XPS的结果一致,TPR结果表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄表面上存在氧缺陷, 并且XAFS结果也表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄具有更多的Co²⁺．提高焙烧温度使得过量的Co²⁺进一步氧化为Co³⁺,同时降低了表面氧缺陷浓度,从而得到计量比的Co₃O₄4/SiO₂催化剂．在所有的负载催化剂中Co₃O₄(200)/SiO₂催化剂表现出了最好的CO氧化催化性能,表明过量Co²⁺和表面氧缺陷的存在能够促进Co₃O₄催化CO氧化反应的活性.     

基于TaCl5的Ta2O2气凝胶制备工艺

 主要介绍了以TaCl₅为前驱体,低分子醇类为溶剂,分别采用环氧丙烷和环氧氯丙烷作为凝胶促进剂制备Ta₂O₂湿凝胶,湿凝胶经过CO₂超临界干燥而获得白色Ta₂O₂气凝胶。透射电镜图谱表明气凝胶是由粒度为10～20 nm的颗粒堆积而成。N₂等温吸附-脱附分析表明,气凝胶的比表面积为800～900 m²/g。     

SiO2内保护层对LiB3O5晶体倍频增透膜损伤阈值的影响

 利用离子辅助电子束沉积方法在LiB₃O₅基底上镀制了不加SiO₂内保护层和加SiO₂内保护层的倍频增透膜，测量了两类薄膜在波长1 064 nm多脉冲辐照下的激光损伤阈值，获得了两种不同的损伤形貌，并对损伤原因作了初步探讨。实验结果表明：保护层的加入把由基底膜层界面缺陷吸收所决定的阈值改变到由HfO₂膜层内缺陷吸收所决定的阈值，显著提高了倍频增透膜的抗激光损伤能力。     

层间热处理对SiO2/ZrO2双层膜的影响

 以正硅酸乙酯和丙醇锆为前驱体,用溶胶-凝胶法在K9基片上提拉镀制SiO₂/ZrO₂双层膜。采用不同实验步骤制备了2个样品,样品1镀完SiO₂后直接镀ZrO₂ ,样品2镀完SiO₂经热处理后再镀ZrO₂。采用原子力显微镜、椭偏仪、紫外-可见分光光度计对薄膜进行表征。针对SiO₂/ZrO₂双层膜,考虑到膜间渗透的影响,采用３层Cauchy模型进行椭偏模拟,椭偏参数的模拟值曲线与椭偏仪的测量值曲线十分吻合,进而发现热处理可以使SiO₂/ZrO₂双层膜之间的渗透减少近23 nm,从而提高其峰值透射率。利用输出波长1.064 mm,脉宽8.1 ns的激光束对样品进行了损伤阈值的测试,用光学显微镜观察损伤形貌,结果发现两者损伤阈值分别为13.6 J/c2和14.18 J/cm²,均为膜的本征损伤。     

不同后处理方法对溶胶-凝胶SiO2膜层抗污染能力的影响

 以正硅酸乙酯作为前驱体,利用碱催化方式制备了SiO₂溶胶,采用提拉法在K9基片上镀制SiO₂单层薄膜,分别用热处理、紫外辐射处理、氨水加六甲基二硅胺烷气氛处理和酸碱复合膜4种后处理法对膜层进行处理,采用分光光度计、红外光谱、扫描探针显微镜、静滴接触角测量仪、椭偏仪等分析了薄膜的特性,通过真空环境加速污染实验对处理前后的膜层进行抗污染能力对比,结果表明：在碱性SiO₂膜层上加镀一层酸性SiO₂膜的复合膜层整体透过率仍保持在99%以上,疏水角达到128°,膜层真空抗污染能力大大加强。     

一维Ni0.5Zn0.5Fe2O4/SiO2复合纳米结构的制备及其磁性能

采用溶胶-凝胶法结合静电纺丝技术制备了Ni_0.5Zn_0.5Fe₂O₄/SiO₂复合纳米纤维.利用热重-差热分析、X射线衍射、场发射扫描电镜、高分辨透射电镜和振动样品磁强计研究了前驱体纤维的热分解及相转化过程以及焙烧温度和SiO₂含量对目标纳米纤维的相组成、微观结构、形貌及磁性能的影响.结果表明,在450 ℃焙烧时,立方尖晶石结构已基本形成.随着焙烧温度由450 ℃升高到100     

超声强化合成MgFe2O4纳米颗粒及其机理研究

用超声水解方法制备MgO纳米颗粒,用化学沉淀法制备α-Fe₂O₃纳米颗粒,将MgO/α-Fe₂O₃混合体常温下超声活化2h,400℃固相合成制备出MgFe₂O₄纳米颗粒.通过X射线衍射和透射电子显微镜测试产品的化学成分、晶体结构和形貌尺寸,分析声化学反应机理及其影响因素.研究结果表明:所制备的MgFe₂O₄为尖晶石铁氧体,颗粒尺寸分布在20-30nm之间,粒度分布均匀;超声空化效应提高了化学反应活性、增加反应物的比表面积和反应物之间的接触面积,促进固相合成反应速度,降低反应温度,实现了一般条件下难以完成的化学反应.     

杂质对溶胶-凝胶SiO2薄膜激光损伤的影响

 采用溶胶-凝胶法制备了含有吸收性杂质和非吸收性杂质的SiO₂增透膜,采用波长为1 064 nm的激光对其进行了小光斑激光预处理,对比研究了预处理前后的激光损伤差异,研究表明：激光预处理对于洁净的SiO₂薄膜影响不大;含10 μm SiO₂颗粒杂质的样品微透镜效应很明显,容易成为损伤起始的种子,激光预处理后情况有所改善;含有CeO₂颗粒杂质的样品表现出了很强的吸收性质,损伤阈值降低到不足洁净样品的一半。所有样品激光预处理后损伤形貌未发生变化,透光率峰值均有约50 nm的蓝移。     

块状Ta2O5-TiO2复合气凝胶的制备与表征

 以乙醇钽、钛酸丁酯为原料,以乙醇为溶剂,通过溶胶-凝胶法及超临界干燥成功制备了Ta₂O₅-TiO₂复合气凝胶。用场发射扫描电镜（SEM）、透射电镜（TEM）、扫描电镜模式下的电子能谱仪（EDS）以及比表面积吸附仪（BET）对其进行表征。结果表明:该气凝胶是由粒径在nm量级的Ti和Ta的羟基氧化物胶体颗粒堆积而成的低密度、高比表积的多孔网络结构材料,孔径分布主要集中在5~15 nm,比表面积为492.9 m²/g,密度为90 mg/cm³左右。     

A facile synthesis of monodisperse CoFe2O4/SiO2 nanoparticles

Aminated-CoFe₂O₄/SiO₂ magnetic nanoparticles (NPs) were prepared from primary silica particles using modified StÖber method. By optimizing the preparation conditions, monodisperse CoFe₂O₄/SiO₂ NPs with high amino groups’ density were obtained, which is necessary for enzyme immobilization. TEM confirm that the sample is a core/shell structure. These aminated-CoFe₂O₄/SiO₂ NPs have narrow size distributions with a mean size of about 60 nm. Moreover, the aminated-CoFe₂O₄/SiO₂ NPs can be easily dispersed in aqueous medium. The experimental results also show that the NPs have superparamagnetism, indicating that the aminated-CoFe₂O₄/SiO₂ NPs can be used as an effective carrier for the enzyme immobilization.     

Fe3O4/β-CD的高压电学性质研究

 高压下的电学性质测量是获得材料物理性质的有效手段。利用集成在金刚石对顶砧上的薄膜微电路,测量了高压下Fe₃O₄/β-CD（β-糊精）的电导率,并分析了电导率随压力的变化关系。在0～39.9 GPa范围内,Fe₃O₄/β-CD的电导率随压力的增加而逐渐增大,并呈半导体的特征;而在17.0 GPa处其电导率发生突变,表明样品发生了高压相变。在卸压过程中,电导率随压力的变化呈线性关系,并且卸压后样品的电导率不能回到最初的状态,推测这是一个不可逆的高压结构相变。     

Immobilization of glucose oxidase using CoFe2O4/SiO2 nanoparticles as carrier

Aminated-CoFe₂O₄/SiO₂ magnetic nanoparticles (NPs) were prepared from primary silica particles using modified StÖber method. Glucose oxidase (GOD) was immobilized on CoFe₂O₄/SiO₂ NPs via cross-linking with glutaraldehyde (GA). The optimal immobilization condition was achieved with 1% (v/v) GA, cross-linking time of 3 h, solution pH of 7.0 and 0.4 mg GOD (in 3.0 mg carrier). The immobilized GOD showed maximal catalytic activity at pH 6.5 and 40 °C. After immobilization, the GOD exhibited improved thermal, storage and operation stability. The immobilized GOD still maintained 80% of its initial activity after the incubation at 50 °C for 25 min, whereas free enzyme had only 20% of initial activity after the same incubation. After kept at 4 °C for 28 days, the immobilized and free enzyme retained 87% and 40% of initial activity, respectively. The immobilized GOD maintained approximately 57% of initial activity after reused 7 times. The K_M (Michaelis-Menten constant) values for immobilized GOD and free GOD were 14.6 mM and 27.1 mM, respectively.     

Relaxation phenomena in ensembles of CoFe2O4 nanoparticles

Collective magnetic behavior of CoFe₂O₄ nanoparticles with diameters of 76, 16, 15 and 8 nm, respectively, prepared by different chemical methods has been investigated. Particle composition, size and structure have been characterized by inductive coupled plasma (ICP), transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD). Basic magnetic properties have been determined from the temperature dependence of magnetization and magnetization isotherms measurements. The three samples exhibit characteristic of a superparamagnetic system with the presence of strong interparticle interactions. Magnetic relaxation phenomena have been examined via frequency-dependent ac susceptibility measurements and aging and memory effect experiments. For the particles coated with oleic acid, it has been demonstrated that the sample reveals all attributes of a super-spin glass (SSG) system with strong interparticle interactions.     

Effects of applied magnetic field and pressures on the magnetic properties of nanocrystalline CoFe2O4 ferrite

Nanocrystalline CoFe₂O₄ ferrite with crystallite sizes of 30 nm have been successfully prepared by an emulsion method. X-ray diffractometer (XRD) shows that nanocrystalline CoFe₂O₄ ferrite possesses face center cubic structure. Crystal structure of the CoFe₂O₄ nanocrystals will not be changed by the applied magnetic field and pressures. The obtained CoFe₂O₄ nanocrystalline powders were pressed into thin columns with different pressures. Meanwhile, the dependences of the applied pressures and the direction of applied magnetic field on the magnetic properties of the CoFe₂O₄ nanocrystals were investigated in detail using vibrating sample magnetometer (VSM). The pressed CoFe₂O₄ nanocrystal gains the most excellent magnetisms in a parallel applied magnetic field.     

Electronic structure studies of the spinel CoFe2O4 by X-ray photoelectron spectroscopy

The spinel CoFe₂O₄ has been synthesized by combustion reaction technique. X-ray photoelectron spectroscopy shows that samples are near-stoichiometric, and that the specimen surface both in the powder and bulk sample is most typically represented by the formula (Co_0.4Fe_0.6)[Co_0.6Fe_1.4]O₄, where cations in parentheses occupy tetrahedral sites and those within square brackets in octahedral sites. The results demonstrate that most of the iron ions are trivalent, but some Fe²⁺ may be present in the powder sample. The Co 2p_3/2 peak in powder sample composed three peaks with relative intensity of 45%, 40% and 15%, attributes to Co²⁺ in octahedral sites, tetrahedral sites and Co³⁺ in octahedral sites. The O 1s spectrum of the bulk sample is composed of two peaks: the main lattice peak at 529.90 eV, and a component at 531.53 eV, which is believed to be intrinsic to the sample surface. However, the vanishing of the O 1s shoulder peak of the powder specimen shows significant signs of decomposition.     

Preparation and characterization of multi-functional CoFe2O4-ZnO nanocomposites

Multi-functional magnetic, photoluminescent and photocatalytic CoFe₂O₄-ZnO nanocomposites were successfully synthesized by a collosol method. The average diameter of the prepared CoFe₂O₄-ZnO nanocomposites was 30±5 nm, and a diffusion layer was formed to link CoFe₂O₄ and ZnO. The saturation magnetization of the CoFe₂O₄-ZnO nanocomposites was 8.99 emu/g. Generation of ZnO from Zn(OH)₂ collosol was nearly complete after thermal decomposition at about 380 °C. A photoluminescence emission peak was observed at 443 nm when excitated at 350 nm. Degradation of methyl orange is performed by CoFe₂O₄-ZnO nanocomposites under ultraviolet radiation, with a degradation rate of up to 93.9%.     

Microstructural and domain effects in epitaxial CoFe2O4 films on MgO with perpendicular magnetic anisotropy

CoFe₂O₄ (CFO) epitaxial thin films of various thicknesses were grown on MgO substrates using the pulsed electron-beam deposition technique. The films have excellent in-plane coherence with the substrate, exhibit layer-by-layer growth and have well-defined thickness fringes in x-ray diffraction measurements. Atomic force microscopy (AFM) measurements indicate that misfit dislocations form in thicker films and the critical thickness for the dislocation formation is estimated. Perpendicular magnetic anisotropy in CFO due to epitaxial in-plane tensile strain from the substrate was found. A stripe-like domain structure in the demagnetized state is demonstrated using magnetic force microscopy (MFM), in agreement with previous predictions. Coercivity increased in thicker films, which is explained by domain wall pinning due to misfit dislocations at the CFO/MgO interface.     

Er3+掺杂SiO2复合的Al2O3粉末结构及光致发光特性

采用溶胶-凝胶(sol-gel)工艺制备0.1 mol% Er³⁺掺杂Al₂O₃体系和SiO₂-Al₂O₃复合体系粉末. 实验结果表明：5 mol%的SiO₂复合加入Al₂O₃抑制γ→θ和θ→α相转变. 掺0.1 mol%Er³⁺:Al₂O₃体系粉末，900℃烧结，在1.47—1.63μm波段内光致发光(PL)谱为中心波长1.53 μm、半高宽56 nm的单一宽峰，1000—1200℃烧结，劈裂为多峰PL谱. 掺0.1 mol%Er³⁺:SiO₂-Al₂O₃复合体系粉末，在高达1200℃烧结，仍保持中心波长1.53 μm的单一宽峰PL谱，由于—OH更完全的脱除，PL强度较900℃烧结Al₂O₃体系，SiO₂-Al₂O₃复合体系均提高1个数量级. 关键词： 2-Al₂O₃复合体系')" href="#">SiO₂-Al₂O₃复合体系 掺铒 溶胶-凝胶工艺 光致发光     

Synthesis and magnetic properties of hard magnetic (CoFe2O4)-soft magnetic (Fe3O4) nano-composite ceramics by SPS technology

CoFe₂O₄/Fe₃O₄ nano-composite ceramics were synthesized by Spark Plasma Sintering. The X-ray diffraction patterns show that all samples are composed of CoFe₂O₄ and Fe₃O₄ phases when the sintering temperature is below 900 °C. It is found that the magnetic properties strongly depend on the sintering temperature. The two-step hysteresis loops for samples sintered below 500 °C are observed, but when sintering temperature reaches 500 °C, the step disappears, which indicates that the CoFe₂O₄ and Fe₃O₄ are well exchange coupled. As the sintering temperature increases from 500 to 800 °C, the results of X-ray diffractometer indicate the constriction of crystalline regions due to the ion diffusion at the interfaces of CoFe₂O₄/Fe₃O₄ phases, which have great impact on the magnetic properties.