首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
This paper looks back on a quarter century of history of the Council Committee on Reference Materials of the International Organization for Standardization – REMCO. It begins however with the period before its formation in 1976 to describe how the Committee came into being as a response to a growing need by the analytical community for the number and variety of reference materials (RMs) as well as a need for the assurance of the quality of RMs and ends with a view of REMCO activities in the near future. This is not intended as a detailed history but instead to describe the evolution of REMCO by identifying major activities and accomplishments of REMCO. Received: 21 January 2002 Accepted: 22 January 2002  相似文献   

2.
 This article is devoted to the role of reference materials (RMs) in chemical analysis and their main applications in analytical laboratories. The principal requirements of the RMs used in accredited laboratories in the Russian Analytical Laboratories Accreditation System (SAAL) are presented. These include the basic regulatory and metrological requirements of RMs. Finally, a review of the provision of RMs used for the analytical control of various test objects is presented. Received: 9 August 1998 / Accepted: 9 November 1998  相似文献   

3.
 The paper reviews the application of reference materials (RMs) in environmental analysis of trace organic pollutants. The problems related to RM preparation, stability, use, etc. are critically discussed. Importance of analytical quality assurance and the role RMs play in the process are emphasised. Received: 18 May 1999 · Accepted: 27 December 1999  相似文献   

4.
 In practice there are three aspects that need to be considered in order to achieve the required traceability according to its definition: the 'stated reference', the 'unbroken chain of calibrations' and the "stated uncertainty". For a certain chemical result, each of these aspects highly depends on the measurement uncertainty, both on its magnitude and how it was estimated. Therefore, the paper describes the experience of the Romanian National Institute of Metrology in estimating measurement uncertainty during the certification of reference materials (RMs), in metrological activities (calibration, pattern approval, periodical verification, etc.), as well as during the analytical measurement process. Practical examples of estimation of measurement uncertainty using RMs or certified reference materials are discussed for their applicability in spectrophotometric and turbidimetric analysis. Use of the analysis of variance to obtain some additional information on the components of measurement uncertainty and to identify the magnitude of individual random effects is described. Received: 12 November 1999 / Accepted: 25 February 2000  相似文献   

5.
The need for inter-laboratory comparability is crucial to facilitate the globalisation of scientific networks and the development of international databases to support scientific and criminal investigations. This article considers what lessons can be learned from a series of inter-laboratory comparison exercises organised by the Forensic Isotope Ratio Mass Spectrometry (FIRMS) network in terms of reference materials (RMs), the management of data quality, and technical limitations. The results showed that within-laboratory precision (repeatability) was generally good but between-laboratory accuracy (reproducibility) called for improvements. This review considers how stable isotope laboratories can establish a system of quality control (QC) and quality assurance (QA), emphasising issues of repeatability and reproducibility. For results to be comparable between laboratories, measurements must be traceable to the international δ-scales and, because isotope ratio measurements are reported relative to standards, a key aspect is the correct selection, calibration, and use of international and in-house RMs. The authors identify four principles which promote good laboratory practice. The principle of identical treatment by which samples and RMs are processed in an identical manner and which incorporates three further principles; the principle of identical correction (by which necessary corrections are identified and evenly applied), the principle of identical scaling (by which data are shifted and stretched to the international δ-scales), and the principle of error detection by which QC and QA results are monitored and acted upon. To achieve both good repeatability and good reproducibility it is essential to obtain RMs with internationally agreed δ-values. These RMs will act as the basis for QC and can be used to calibrate further in-house QC RMs tailored to the activities of specific laboratories. In-house QA standards must also be developed to ensure that QC-based calibrations and corrections lead to accurate results for samples. The δ-values assigned to RMs must be recorded and reported with all data. Reference materials must be used to determine what corrections are necessary for measured data. Each analytical sequence of samples must include both QC and QA materials which are subject to identical treatment during measurement and data processing. Results for these materials must be plotted, monitored, and acted upon. Periodically international RMs should be analysed as an in-house proficiency test to demonstrate results are accurate.  相似文献   

6.
 A lot of effort is being made in Romania to meet the present main strategic goal – EU integration. Since the confidence in measurements is of considerable importance in almost every field of activity, the National Institute of Metrology (INM) is involved in improving its calibration and measurement capabilities to provide services in accordance with the latest European Regulation. Within this framework the assurance of the required traceability of all measurements plays a most important role. As reliable analytical measurements depend largely upon reference materials and the assurance of the traceability of amount measurements is still developing in Romania, a new approach regarding the function of Certified Reference Materials (CRMs) may be emphasized. The experience of the INM as well as new developments in Romania in preparation and certification of Reference Materials (RMs) are described. A short review of the locally available RMs and CRMs is given. Some aspects regarding the use of RMs and CRMs, especially for calibration, are discussed for their applicability for analytical measurements. Received: 31 October 2002 Accepted: 24 January 2003 Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to M. Buzoianu  相似文献   

7.
Reference materials have been applied widely to ensure the traceability, comparability and reliability of measurement results. To achieve this purpose, the quality of reference materials (RMs) themselves is surely an important aspect to be pay attention to. A quality evaluation system of RMs has been established through the project “The National Sharing Platform of Reference Materials” in China to give a reliable assessment on the quality of RMs from various sources including the accuracy and comparability of their property values, which is very useful to promote the appropriate selecting and using of RMs in China. Through the application of National Metrology Institute calibration and measurement capabilities on the basis of the international mutual recognition arrangement, it can also provide a powerful supplement to the current activities such as the accreditation of RM producers in the construction of a global harmonized quality control and assurance system of RMs.  相似文献   

8.
The status of the availability and appropriateness of standard reference materials (RMs) currently available for Pb in paint, dust, soil and drinking water is reviewed. The need for RMs which will be most appropriate for environmental Pb analysis in the context of the analytical techniques used, government regulations and health effects, is assessed. Also, the importance of factors such as bioavailability, sample size, homogeneity and composition that should be considered in developing appropriate RMs certified for Pb in paint, dust, soil and drinking water is stressed.  相似文献   

9.
The International Atomic Energy Agency (IAEA), in co-operation with the United Nations Environment Programme (UNEP), has recently prepared a survey on internationally available analytical reference materials for trace elements, nuclides and organic contaminants in biological, environmental and related matrices. The purpose is to help analysts to select reference materials for quality assurance that match as closely as possible, with respect to matrix type and concentrations of the measurands of interest, the “real” samples that are to be measured. The present version of the survey, which is available in the form of two cost-free printed volumes [1], contains over 10,000 certified and information values in 650 reference materials from 27 different producers. The 455 measurands listed include trace elements, major and minor elements, organic contaminants, organometallic compounds, radionuclides and stable isotopes. Currently, the database from which the survey has been produced is being modified and extended so as to make the data available in electronic form via the Internet. Received: 11 June 1997 / Revised: 7 July 1997 / Accepted: 9 July 1997  相似文献   

10.
Summary The reference materials (RMs) available for organic trace analysis (OTA) and the development programmes of the RM producers are reviewed. The need for a wider range of determinants, matrices and classes of RMs, particularly the more widespread use of laboratory RMs (LRMs) is discussed. Additional certified RMs should include phenolic surfactant degradation products, chlorophenolics from the wood and paper industries, and organobromines from fire retardants. RMs as molecular markers of geogenic, pyrogenic and biogenic sources; chlorophylls and xanthophylls as a measure of marine productivity and natural shellfish toxins are proposed.
Notwendigkeit organischer Referenzmaterialien in der Meeresforschung
  相似文献   

11.
The reliability of reference materials (RMs) depends on properties such as fitness, robustness, commutability, stability and homogeneity. The development of RMs for microbiological analysis is especially challenged through questions around the stabilisation and recovery of viable cells, the dispersion of precise numbers of cells, matrix effects and, when using molecular techniques, the presence of nucleic acids (e.g. DNA) of dead and live target organisms. However, RMs are indispensable tools for quality control in microbiological analysis. The Institute for Reference Materials and Measurements (IRMM), as part of the European Commission, concentrates its efforts on the development of RMs to support the development, implementation and monitoring of EU legislation. A special focus is given to highly precise RMs for presence/absence and enumeration tests in microbiological food and water analysis. Another group of new RMs certified by the IRMM comprise DNA-based materials to control the identity of micro-organisms in qualitative assays. All of these activities serve to improve quality control in microbiological analysis. Presented at ‘BERM-10’, April 2006, Charleston, SC, USA.  相似文献   

12.
Over the course of its first 100 years, the National Institute of Standards and Technology (NIST) has made numerous contributions to advancing the science and practice of analytical chemistry. Contributions to fundamental constants and reference data, such as determination of the Faraday, Avagadro’s number, and atomic masses, began at almost the beginning of the new institution when it was formed in 1901. Instrumentation development, improvement, and reproducible methods for its use have also been an important part of the NIST effort. This paper will describe what may be the organization’s most important and certainly its most unique contribution; namely, certified reference materials. Ultimately these certified reference materials would become known at NIST as standard reference materials (SRMs). It is a contribution that now has been mirrored around the world with reference materials being certified in at least 25 countries and routinely applied in more than twice that number. The result has been more accurate analyses of materials that impact our safety, health, and well-being. Received: 22 November 2000 Accepted: 22 November 2000  相似文献   

13.
This article discusses the requirements for reference materials (RMs) for measuring the size of nanoparticles (NPs). Such RMs can be used for instrument calibration, statistical quality control or interlaboratory comparisons. They can come in the form of suspensions, powders or matrix-embedded materials [i.e. NPs integrated in a natural matrix (e.g., food, soil, or sludge)].At present, uncertainty about the most suitable form of material, the most relevant measurands and the most useful metrological-traceability statement inhibits the production of NP RMs. In addition, the lack of validated methods and qualified laboratories to produce NP RMs present formidable challenges.Metal, inorganic and organic NPs are available, but most of them are intended to be laboratory chemicals. With the exception of latex materials, certified RMs are not available, although some metrology institutes have started to develop such materials for colloidal gold and silica particles.  相似文献   

14.
Selenomethionine content of candidate reference materials   总被引:1,自引:0,他引:1  
Selenium has been identified as an antioxidant of importance in the diet. Accurate determination of its chemical forms depends on the availability of suitable reference materials (RMs). Two candidate reference materials for determination of selenomethionine (Semet) in food-related materials, a standard wheat gluten sample (NIST RM 8418 Wheat Gluten) and a commercial selenium enriched yeast, have been examined by use of a gas chromatography–isotope dilution mass spectrometry (IDMS) procedure, after treatment of the matrix with 0.1 mol L–1 hydrochloric acid containing stannous chloride, addition of CNBr, and extraction with chloroform. This procedure results in cleavage of the CH3Se group to form volatile CH3SeCN. Addition of isotopically enriched 74Semet to an analytical sample enables estimation of the naturally occurring protein-bound 80Semet by IDMS without a protein-digestion process. We found that the Wheat Gluten RM contains a significant amount of Semet as a portion of its assigned value of 2.58 μg Setotal g–1. Commercial selenium yeast tablets are labeled as containing an elevated level of “organic selenium”, usually as Semet. The sample we investigated contained 210 μg Setotal g–1 sample as determined separately by IDMS, measuring elemental selenium after digestion. 73% of this total (153±21 μg SeSemet g–1; n = 23) was present as Semet. Thus, these two materials contain significant amounts of their total selenium content as Semet and would be good candidates for further study and characterization as reference materials for determining this important food component. The CNBr reaction used will also enable the determination of Se-(methyl)selenocysteine, the biological role of which is of recent interest. In addition to matrix RMs for Semet, it is important to have standard materials of the pure substance. We have examined a sample of a candidate standard material of selenomethionine being prepared by the USP. It was confirmed that this material is pure selenomethionine. Received: 13 December 2000 / Revised: 5 March 2001 / Accepted: 12 March 2001  相似文献   

15.
The analysis of reference materials (RMs) can help assess the equivalence of chemical measurement processes. When two or more RMs are available for a given measurand, confidently establishing the equivalence of measurement processes requires the RMs to be capable of yielding equivalent results. Evaluating the degrees of equivalence among RMs that differ in analyte quantity and perhaps matrix composition requires an approach other than that used to assess results for samples of a single material. We have more than a decade of experience with an approach that compares the assigned values of RMs to a simple linear model of the relationship between those values and measurement results ideally made under repeatability conditions. In addition to accessing the metrological equivalence of specific RMs, the equivalence of the value-assignment capabilities of the organizations that issue the RMs can also be accessed. This report summarizes our experience with the design of and analysis of studies using this approach and provides numeric and graphical tools for estimating degrees of equivalence. We divide the required tasks into four steps: (1) design, (2) measurement, (3) definition of a reference function, and (4) estimation of degrees of equivalence. We regard the experimental design and measurement tasks as most critical to the eventual utility of the comparison, since creative mathematics cannot fully compensate for poor planning or erratic measurements.  相似文献   

16.
Accreditation and Quality Assurance - In this work, two reference materials (RMs) for mass fraction of histamine in canned tuna were developed to address the need of local testing laboratories for...  相似文献   

17.
 There are a wide variety of spectrophotometric devices nowadays used in health services with various qualities of manufacture methods of measurement and metrological characteristics for performing the necessary measurements. Therefore, to meet the accuracy and repeatability requirements needed in medical diagnosis and treatment, the validation of the performance of such systems by clinical chemistry laboratories is essential. However, the validation of a spectrophotometric system for clinical analyses requires several reference materials, according to the end use of the measurement results. This paper discusses some characteristics required of the clinical reference materials needed and used by Romanian Institute of Metrology for validation work. Types of clinical reference materials developed in the national area for this purpose are also presented. Received: 23 April 1997 · Accepted: 7 July 1997  相似文献   

18.
Summary The analytical quality control program employed by the ongoing FAO study on 14 trace elements in nationally representative staple foods of European countries is presented. The analytical quality control used is based on: 1) precautions taken to avoid trace element contaminations or losses during sampling and sample handling; and, 2) on methods used to guarantee that the actual determinations yield correct results. The precautions are presented. A number of certified biological reference materials (RMs) were used to validate the analytical methods employed. The following staple food RMs were also prepared: wheat flour, potato powder, animal muscle (pork) and milk powder. They were tested for homogeneity and subjected to an interlaboratory comparison study on the basis of which recommended values for trace element concentrations were defined. Further, the mean relative standard deviation for the 95% confidence limits of the medians in all RMs was below 5% for Ca, Mg and Zn; below 10% for Mn; below 15% for Fe, Cu and Se; and below 25% for Mo and Ni. These RMs were used to control the analytical quality of the trace element determinations in the actual samples. It is concluded that important contaminations were avoided in sampling and sample handling and that use of the RMs described was necessary to guarantee the analytical quality of the results.  相似文献   

19.
A great number of analyses is performed every year, the results of which are used for many purposes, e.g. the quality of goods and food, the status of quality of the environment or the health of patients. The accuracy of these results is a prerequisite for a good interpretation of the data obtained. One of the most powerful tool for achieving quality control of chemical analysis is to use reference materials (RMs) and certified reference materials (CRMs). These materials are necessary for one or more of the following items: method validation (CRMs), monitoring of the state of statistical control (RMs), samples in inter-comparisons (RMs), etc. The requirements and use of RMs and CRMs in chemical analysis are described, with special emphasis on environmental analysis, and some examples of environmental materials currently in production within the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission are given.  相似文献   

20.
In order to provide quality assurance in the field of clinical chemistry, required by European Standards, the Romanian national metrological infrastructure has to be improved. The main objectives of this important activity are metrological assurance of concentration measurements, the assessment of the uncertainty, and the traceability of measurements. Within this framework, reference materials play an important role. The experience of INM in the preparation, certification and use of reference materials and in metrological assurance of clinical laboratory measurements (especially when absorption photometric devices are used) is described. The combined uncertainty associated with chemical preparation of these reference materials is estimated. Received: 25 April 1997 / Revised: 8 July 1997 / Accepted: 12 July 1997  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号