Protonation study of peroxynitric acid and peroxynitrous acid

The equilibrium structures and harmonic vibrational frequencies of peroxynitric acid (HOONO(2)) and seven structures of protonated peroxynitric acid, along with peroxynitrous acid (HOONO) and its 12 protonated peroxynitrous acid structures, have been investigated using several ab initio and density functional methods. The ab initio methods include second-order Moller-Plesset perturbation theory, quadratic configuration interaction, including single and double excitations theory (QCISD), and the QCISD(T) methods, which incorporate a perturbational estimate of the effects of connected triple excitation. The Becke three-parameter hybrid functional combined with Lee, Yang, and Parr correlation function is the density functional method used. The lowest energy form of protonated peroxynitric acid is a complex between H(2)O(2) and NO(+) rather than between H(2)O and NO(2) (+). For peroxynitrous acid, a complex between H(2)O(2) and NO(2) (+) is found to be the lowest energy structure. The ab initio proton affinity (PA) of HOONO and HOONO(2) is predicted to be 182.1 and 175.1 kcal mol(-1), respectively, at the QCISD(T)/6-311++G(3df,3pd) level of theory. The results are contrasted with an earlier study on nitrous acid, and is shown that peroxynitric acid and peroxynitrous acid have a smaller PA than nitrous acid.     

Synthesis of mixed acid anhydrides from methane and carbon dioxide in acid solvents

[reaction: see text] The reaction of CH(4) with CO(2) has been performed in anhydrous acids using VO(acac)(2) and K(2)S(2)O(8) as promoters. NMR analysis establishes that the primary product is a mixed anhydride of acetic acid and the acid solvent. In sulfuric acid, the overall reaction is CH(4) + CO(2) + SO(3) --> CH(3)C(O)-O-SO(3)H. Hydrolysis of the mixed anhydride produces acetic acid and the solvent acid. When trifluoroacetic acid is the solvent, acetic acid is primarily formed via the reaction CH(4) + CF(3)COOH --> CH(3)COOH + CHF(3).     

Acylation of hydrazides with acetic acid and formic acid

In peptide synthesis, hydrazides are important intermediates for the azide coupling method. A hydrazide is converted to the corresponding azide in the presence of an acid and a nitrite. When acetic acid (or formic acid) is used as the acid, partial acetylation (or formylation) of the hydrazide occurs as a side reaction. Formylation of the hydrazide is much faster than acetylation. Removal of the formyl group on the hydrazide with hydrazine and hydroxylamine was studied. The rate of deformylation with hydrazine treatment is faster than that with hydroxylamine treatment.     

Synthesis of stearic acid triethanolamine ester over solid acid catalysts

<正>The synthesis of stearic acid triethanolamine ester over solid acid catalysts was investigated.The results showed that the catalytic activity and selectivity of zirconium sulfate supported on SBA-15(6)(pore diameter 6 nm) is better than that of commonly used hypophosphorous acid,zirconium sulfate supported on MCM-41 and zirconium sulfate supported on SBA-15(9)(pore diameter 9 nm).     

Simultaneous kinetic determination of uric acid ascorbic acid mixtures

A kinetic stopped-flow method is described for the simultaneous determination of uric acid and ascorbic acid with tris (2,2'-bipyridine)iron(III). For the least favourable ratios of uric to ascorbic acid, in a total concentration of 10^-5 M, the error in the determination of uric acid is estimated at ±10%.     

Composition of phosphoric acid solutions obtained when orthophosphoric acid is used as solvent for iron-containing samples by heating: The influence of nitric acid, sulphuric acid and iron(III)

The dissolution of an iron-containing substance in orthophosphoric acid either alone or mixed with nitric acid or nitric acid-sulphuric acid mixture at 270-280 degrees has been examined, to determine the composition of the solutions which are used for analytical determinations. The possibility of condensation of H(3)PO(4) and formation of polyphosphoric acids during the dissolution has been proved. Solutions which may contain pyrophosphoric acid, tripolyphosphoric acid and tetrapolyphosphoric acid have been obtained. The exact composition of these solutions depends on the initial H(3)PO(4) concentration, the heating time, and, in some cases, the presence of nitric acid and sulphuric acid. It is assumed that the nitric and sulphuric acid affect the loss of water and therefore the thermal dehydration of the orthophosphoric acid during the dissolution. No qualitative changes in the phosphoric acid composition have been observed in the presence of Fe(III). Formation of Fe(III) polyphosphates is assumed.     

Simultaneous determination of ascorbic acid and acetylsalicylic acid in pharmaceutical formulations

A direct, simple, and practical first-derivative spectrophotometric method is described for simultaneous determination of ascorbic acid and acetylsalicylic acid. The effects of the solvent, excipients, and spectral variables on the analytical signal were investigated. The drugs were determined simultaneously with a 0.01 M methanolic hydrochloric acid solution as the solvent, and the signals were evaluated directly by using the zero-crossing method at 245.0 and 256.0 nm for acetylsalicylic acid and ascorbic acid, respectively. The method allows the simultaneous determinations of acetylsalicylic acid and ascorbic acid in the ranges of 6.6 x 10(-6) to 1.5 x 10(-4)M and 3.4 x 10(-6) to 2.0 x 10(-4)M, respectively, with standard deviation of <2.0%. The proposed method was applied to determinations of these drugs in tablets.     

Fatty acid vesicles

Results obtained from recent studies on the preparation and application of fatty acid vesicles are reviewed, focusing on some of the particular properties of fatty acid vesicles in comparison with conventional phospholipid vesicles (liposomes): (i) pH dependency which allows reversible transformations from non-vesicular to vesicular aggregates, and (ii) dynamic features that place fatty acid vesicles in between conventional vesicles formed from double-chain amphiphiles and micelles formed from single-chain surfactants. There are two main research areas in which fatty acid vesicles have been studied actively during the last years: (i) basic physico-chemical properties, and (ii) applications as protocell models. Applications of fatty acid vesicles in the fields of food additives and drug delivery are largely unexplored, which is at least partially due to concerns regarding the colloidal stability of fatty acid vesicles (pH- and divalent cation-sensitivity). Recently, fatty acid vesicles were prepared from highly unsaturated fatty acids (docosahexaenoic acid) and the pH range of vesicle formation could be extended to high or low pH values by preparing mixed vesicles through addition of a second type of single-chain amphiphile that stabilizes the vesicle bilayer but itself is not a fatty acid.     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

Assay of free ferulic acid and total ferulic acid for quality assessment of Angelica sinensis

Activity of Chinese Danggui (DG), the processed root of Angelica sinensis (Oliv.) Diels, is linked to the ferulic acid content but the stability of ferulic acid during extraction for medicinal use is not known. The stabilities of ferulic acid and coniferyl ferulate were evaluated in the extracts of DG using a variety of extraction solvents. These included various combinations and proportions of methanol, water, formic acid, 1 M aqueous hydrochloric acid and 2% sodium hydrogen carbonate (NaHCO3) in water. Coniferyl ferulate was found liable to hydrolyze into ferulic acid in neutral, strongly acidic and basic solvents, where heat and water could facilitate this hydrolysis. However, the hydrolysis was relatively resisted in weakly organic acid. Based on the stability evaluation, two new terms, namely: free ferulic acid and total ferulic acid, were suggested and defined. Free ferulic acid refers to the natural content of ferulic acid in herbs. Total ferulic acid means the sum of free ferulic acid plus the amount of related hydrolyzed components. Meanwhile, the high-performance liquid chromatographic (HPLC) method was developed to assay free ferulic acid and total ferulic acid in DG using methanol-formic acid (95:5) and methanol-2% NaHCO3 in water (95:5) as extraction solvents, respectively. Ten DG samples were investigated on their contents of free and total ferulic acid. The results indicated that the amount variety of free ferulic acid was larger than that of their counterparts, and the ratio of total ferulic acid to free ferulic acid was 4.07 +/- 2.73 (mean +/- SD, n = 10). The chemical assay of DG using total ferulic acid content would be a better choice to assess the herbal quality and was recommended.     

The separation of dimethylarsinic acid,methylarsonous acid,methylarsonic acid,arsenate and dimethylarsinous acid on the Hamilton PRP‐X100 anion‐exchange column

In order to separate the potential arsenite metabolites methylarsonous acid and dimethylarsinous acid from arsenite, arsenate, methylarsonic acid and dimethylarsinic acid, the pH‐dependent retention behaviour of all six arsenic compounds was studied on a Hamilton PRP‐X100 anion‐exchange column with 30 mM phosphate buffers (pH 5, 6, 7, 8 and 9) containing 20% (v/v) methanol as mobile phase and employing an inductively coupled plasma atomic emission spectrometer (ICP–AES) as the arsenic‐specific detector. Baseline separation of dimethylarsinic acid, methylarsonous acid, methylarsonic acid, arsenate and dimethylarsinous acid was achieved with a 30 mmol dm⁻³ phosphate buffer (pH 5)–methanol mixture (80:20, v/v) in 25 min. Arsenite is not baseline‐separated from dimethylarsinic acid under these conditions. Copyright © 1999 John Wiley & Sons, Ltd.     

Diastereoselective synthesis of (+)-nephrosterinic acid and (+)-protolichesterinic acid

A diastereoselective synthesis of (+)-nephrosterinic acid and (+)-protolichesterinic acid, common members of the paraconic acids is described. The synthesis is based on a diastereoselective orthoester Johnson–Claisen rearrangement of a (Z)-allyl alcohol with a vicinal dioxolane moiety as key steps. The synthesis is completed in 10 steps and with overall yields of 15.9% for (+)-nephrosterinic acid and 16.4% for (+)-protolichesterinic acid.     

Measurement of ascorbic acid and dehydroascorbic acid in gastric juice by HPLC

New methods are presented for measuring total vitamin C and the ascorbic acid/dehydroascorbic acid ratio in gastric juice. Extracts are prepared from a gastric juice which are suitable for direct injection onto a Waters Nova-pak C18 Radial-pak cartridge for high performance liquid chromatography (HPLC) using ultraviolet absorbance at 270 nm for detection. Both enable removal of interfering mucus and mucopolysaccharide breakdown products in a novel way. The first uses mini-columns of Sephadex G-50, run in acidic conditions to remove large molecular weight material while maintaining the ascorbic acid/dehydroascorbic acid ratio as it was in the fresh sample. Addition of dithiothreitol converts the dehydroascorbic acid quantitatively to ascorbic acid, thus enabling measurement of both components. The second method converts all the dehydroascorbic acid to ascorbic acid at the outset. A perchloric acid extract is neutralized and passed through a Sep-Pak C18. A new internal standard, reductic acid, is introduced for ascorbic acid analysis which behaves identically on Sep-Pak C18. Samples are analysed by ion-pair chromatography using 0.02 M NH4H2PO4 buffer (pH 7.1): methanol (80:20 v/v) containing 0.62 g/L tetrapentylammonium bromide. The detection limit was 1 ng ascorbic acid, and chromatography was completed in 5 min. The values obtained by the two independent HPLC methods were in good agreement with each other and with those obtained by the 2,4-dinitrophenylhydrazine colorimetric method.     

Studies in the spectrophotometric determination of silicon in materials decomposed by hydrofluoric acid: Spectrophotometric determination of fluosilicic acid in hydrofluoric acid

A procedure is reported for the spectrophotometric determination of fluosilicic acid in commercial hydrofluoric acid. The determination of silicon as (α)a-silicomolybdic acid is carried out directly without previous separation of hydrofluoric acid.     

阴离子交换离子色谱法测定乳酸催化制备的丙烯酸

通过乳酸催化脱水制备丙烯酸具有良好的应用前景。为了对其中的催化过程进行有效、及时的监控,建立了一种同时测定乳酸及丙烯酸的阴离子交换色谱法(AEC)。选择Metrohm A Supp 5阴离子交换柱(150 mm×4.0 mm),以2 mmol/L Na2CO3+2 mmol/L NaHCO3混合水溶液为流动相,采用化学抑制电导检测技术,乳酸和丙烯酸在6 min内即可实现完全分离。乳酸和丙烯酸工作曲线的线性范围分别为0.1～500 mg/L和0.1～200 mg/L,检出限分别为0.030 mg/L和0.035 mg/L,加标回收率分别为100.7%～106%和99.6%～103%,相对标准偏差分别为2.16%~2.49%和2.42%~2.48%。该方法准确、快速、灵敏、重现性好。     

Hawkinsinuria--identification of quinolacetic acid and pyroglutamic acid during an acidotic phase

A second Australian family with the genetic disease Hawkinsinuria has been identified. Affected members excrete hawkinsin and cis- and trans-4-hydroxycyclohexylacetic acid. An infant in this family presented with metabolic acidosis and excreted quinolacetic acid and pyroglutamic acid in the urine together with the tyrosine derived phenolic acids reported in the original index case. It is thought that quinolacetic acid is accumulated as a by-product of the partially defective enzyme, 4-hydroxyphenylpyruvate dioxygenase (EC 1.13.11.27) and that pyroglutamic acid indicated lowered glutathione levels.     

The electronic spectrum of chloroformic acid in comparison to formic acid

The electronic spectra of chloroformic acid ClCOOH and formic acid HCOOH are computed in large-scale multireference configuration interaction (MRD-CI) calculations. The computed spectrum of formic acid is in reasonable agreement with prior calculations and experimental data. The first electronic transition of ClCOOH is computed at 6.41 eV (193.4 nm), about 0.5 eV higher than in HCOOH. Together with five strong transitions calculated at 7.66 eV (161.9 nm; 2(1)A' <-- X(1)A'), 8.36 eV (148.3 nm; 3(1)A' <-- X(1)A'), 8.49 eV (146.0 nm; 4(1)A' <-- X(1)A'), 9.00 eV (137.8 nm; 5(1)A' <-- X(1)A'), and 9.44 eV (131.3 nm; 7(1)A' <-- X(1)A'), this can serve as a guideline for experimental search of ClCOOH.     

Determination of uranium in wet phosphoric acid by extraction with octylphenylphosphoric acid

A method for quantitative determination of uranium in phosphoric acid and wet phosphoric acid has been developed. After reduction with Fe, uranium(IV) is extracted with a kerosene solution of octylphenylphosphoric acid. The uranium was stripped with 10M H₃PO₄, containing H₂O₂, and then determined spectrophotometrically with Arsenazo III and by direct uranium(IV)-phosphoric acid solution measurements.     

The chromic acid oxidation of oxalic acid : Evidence of chromium(IV) oxidation

In the chromic acid oxidation of oxalic acid in the range where the reaction is first order in the substrate, oxalic acid is very reactive toward chromium(IV) and rather unreactive toward chromium(V). A mechanism analogous to that of the chromic acid oxidation of alcohols and aldehydes is proposed for the first order kinetic term.     

Synthesis of 11-thialinoleic acid and 14-thialinoleic acid, inhibitors of soybean and human lipoxygenases

Lipoxygenases catalyse the oxidation of polyunsaturated fatty acids and have been invoked in many diseases including cancer, atherosclerosis and Alzheimer's disease. Currently, no X-ray structures are available with substrate or substrate analogues bound in a productive conformation. Such structures would be very useful for examining interactions between substrate and active site residues. Reported here are the syntheses of linoleic acid analogues containing a sulfur atom at the 11 or 14 positions. The key steps in the syntheses were the incorporation of sulfur using nucleophilic attack of metallated alkynes on electrophilic sulfur compounds and the subsequent stereospecific tantalum-mediated reduction of the alkynylsulfide to the cis-alkenylsulfide. Kinetic assays performed with soybean lipoxygenase-1 showed that both 11-thialinoleic acid and 14-thialinoleic acid were competitive inhibitors with respect to linoleic acid with K(i) values of 22 and 35 microM, respectively. On the other hand, 11-thialinoleic acid was a noncompetitive inhibitor with respect to arachidonic acid with K(is) and K(ii) values of 48 and 36 microM, respectively. 11-Thialinoleic acid was also a noncompetitive inhibitor of human 15-lipoxygenase-1 with arachidonic acid (K(is) = 11.4 microM, K(ii) = 18.1 microM) or linoleic acid as substrate (K(is) = 20.1 microM, K(ii) = 20.0 microM), and a competitive inhibitor of human 12-lipoxygenase with arachidonic acid as substrate (K(i) = 2.5 microM). The presence of inhibitor did not change the regioselectivity of soybean lipoxygenase-1, human 12- or 15-lipoxygenase-1.