磁性碳纳米管对水中孔雀石绿的吸附性能研究

（1）以磁性碳纳米管吸附处理孔雀石绿溶液,考察了吸附剂用量、孔雀石绿浓度以及温度等对吸附平衡的影响。结果表明,该吸附不受溶液pH值的影响,符合准二级动力学方程（R2＞0.999）。不同温度下,该吸附过程满足Langmuir方程（R2>0.97）和Freundlich方程（R2>0.98）,qmax、KF随温度升高而变大。D-R等温方程拟合结果表明该吸附的机理是以化学吸附为主。热力学参数计算结果表明,该吸附是一个熵增的自发吸热过程,温度越高越利于吸附的进行。     

Adsorption property of congo red from aqueous solution by Cu-BTC/SiO 2 composite

The adsorption behavior of congo red from aqueous solution on Cu-BTC/SiO2 was investigated. Cu-BTC/SiO2 with mesoporous structure and large surface area was prepared by loading Cu-BTC into the mesoporous silica using in-situ synthesis method. The X-ray diffraction, scanning electron microscopy, and nitrogen adsorption–desorption analysis were used to characterize the structure and morphology of the prepared materials. The adsorption studies showed that the adsorption isotherm of congo red on Cu-BTC/SiO2 fitted well with Freundlich adsorption model and congo red is easy to be adsorbed by Cu-BTC/SiO2. The thermodynamic study showed that the adsorption behavior of congo red on Cu-BTC/SiO2 is an exothermic process at temperature under investigation.     

Surfactant-sensitized malachite green method for trace determination of orthophosphate in aqueous solution

A surfactant-sensitized spectrophotometric method for determination of trace orthophosphate has been developed using anion surfactant (Ultrawet 60 L) with molybdate and malachite green in low acidic medium (pH_T 1.0). The method detection limit (3 × standard deviation of blank, n = 10) was 8 nM and the calibration curve was linear over a range of 10-400 nM (r² = 0.997). The molar absorptivity was 1.26 × 10⁵ L mol⁻¹ cm⁻¹ at 600 nm with the background correction at 530 nm. The precision of method was 3.4% at 50 nM and 2.4% at 100 nM orthophosphate (n = 10). The hydrolysis of eight organic phosphorus and polyphosphate compounds was less than 2% of the total phosphorus present (5-10 μM). This method showed less arsenate interference than previous methods, with only 3% even in the presence of orthophosphate in the samples. No interference of silicate up to 40 μM was observed. Background anions (in an order of SO₄²⁻ > NO₃⁻ > Cl⁻) have greater effects than cations (Ca²⁺ > Mg²⁺ > Na⁺) on the reagent blank and the molar absorptivity of the color product.     

Removal of Pb(II) and malachite green from aqueous solution by modified cellulose

A low-cost, highly efficient and eco-friendly cellulose-based adsorbent (CMGT) was synthesized and used to uptake Pb(II) and malachite green (MG) from aqueous solutions. The CMGT was characterized by FTIR, SEM, TGA and XRD. Different experimental parameters were evaluated in batch adsorption experiments to determine the optimal adsorption conditions. The optimal pHs for Pb(II) and MG were 5.5 and 7.0, respectively; the optimal contact times for Pb(II) and MG were 60 and 180 min, respectively. Among the Langmuir, Freundlich and Temkin isotherm models, the Langmuir model fitted the adsorption data best for both Pb(II) and MG adsorption. In theory, the maximum adsorption capacities of Pb(II) and MG were 584.80 and 131.93 mg g^?1, respectively. The pseudo-second-order model fitted the experimental data very well, and the thermodynamics were also used to discuss the mechanism in depth. Additionally, desorption tests showed that CMGT could be effectively regenerated by 0.2 mol L^?1 HCl solution and could be reused for at least six cycles successively with a stable sorption ability in the dynamic adsorption process.     

The effect of ionic strength on the UV-vis spectrum of congo red in aqueous solution

The major peak near 498 nm in the ultraviolet-visible spectrum of congo red in aqueous solution shifts toward the blue while the molar absorptivity of this peak decreases predictably with increasing ionic strength. The shift was observed for solutions in which ionic strength was varied from 0.0 to 1.8M using the uni-univalent ionic compounds, NaCl, NaClO(4), KNO(3) and KBr separately. A plot of the log of the absorbance at the peak versus ionic strength was linear as well as a plot of the log of the wavelength of the major peak (shifted from 498 nm) versus the ionic strength. The slopes of each of these plots were somewhat different depending on the ionic compound.     

Removal of malachite green from aqueous solution using nano-iron oxide-loaded alginate microspheres: batch and column studies

Malachite green adsorption characteristics of magnetic beads have been investigated by batch and column methods. The maximum removal percentage of malachite green (93.9 %) was obtained at pH 7–8. The Langmuir and Freundlich isotherms were used to investigate the adsorption equilibrium. It was found that the Freundlich model provides the best correlation with the equilibrium. In the column method, the BDST model was used to obtain an empirical relationship for the design of the adsorption column. The characterization of the prepared magnetic beads has been accomplished by FTIR, SEM, and XRD measurements.     

Removal of cationic methylene blue and malachite green dyes from aqueous solution by waste materials of Daucus carota

In present study adsorption capacity of waste materials of Daucus carota plant (carrot stem powder: CSP and carrot leaves powder: CLP) was explored for the removal of methylene blue (MB) malachite green (MG) dye from water. The morphology and functional groups present were investigated by scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. The operating variables studied were pH, adsorbent dose, ionic strength, initial dye concentration, contact time and temperature. Equilibrium data were analysed using Langmuir and Freundlich isotherm models and monolayer adsorption capacity of adsorbents were calculated. Kinetic data were studied using pseudo-first and pseudo-second order kinetic models and the mechanism of adsorption was described by intraparticle diffusion model.Various thermodynamic parameters such as enthalpy of adsorption ΔH°, free energy change ΔG° and entropy ΔS° were estimated. Negative value of ΔH° and negative values of ΔG° showed that the adsorption process was exothermic and spontaneous. Negative value of entropy ΔS° showed the decreased randomness at the solid–liquid interface during the adsorption of MB and MG onto CSP and CLP.     

Synthesis and application of treated activated carbon for cationic dye removal from modelled aqueous solution

Use of activated carbon (AC) prepared from rice husk and treated with anionic surfactant is investigated to eliminate cationic dye crystal violet (CV) using modelled dye solution. AC modified with anionic surfactant sodium lauryl sulfate (ACSLS) and other two surfactant namely sodium dodecyl sulfonate and hexadecyl trimethyl ammonium bromide were used for the analysis. Optimum ACSLS was analyzed and characterized using BET, XRD, SEM accompanied with XEDS, FTIR, HR-TEM and zeta potential, which confirms the sorption of CV onto ACSLS. Influence of pH, dose of adsorbent, concentration of initial dye, contact time, additive salts as well as actual water samples were investigated. Presence of NH⁴⁺, Ca²⁺, Mg²⁺, Na²⁺, Ca²⁺ and K⁺ cations in dye solution were having negligible (less than 4 %) influence on dye removal capacity. Study of mass transfer parameters revealed intra particle diffusion and film diffusion both played their part, whereas other kinetic studies has shown that experimental data fitted best with Pseudo 2nd order rate. Isotherm studies accompanied with error analysis revealed that Langmuir isotherm controls the adsorption equilibrium with highest capacity of CV adsorption with optimum operating conditions as pH = 6, temperature = 318 K, adsorbent dose = 100 mg/L and dye concentration = 30–60 mg/L. Study of thermodynamics and temperature analysis have shown that the sorption reaction was favourable and spontaneous with rise in temperature and endothermic in nature. Column studies are reported for varying rate of flow, depth of bed and dye concentrations along with analysis of column experimental data with various models like Yoon-Nelson, Thomas, Bohart-Adam and Clark model. Reusability (no. of cycles) of used adsorbent was studied using regeneration experiments. Analysis inferred that AC modified using surfactants can be a useful technique for enhanced adsorption capacity of dyes from aqueous solution and not much work has been reported on use of anionic surfactant modified AC for dye removal process.     

Advanced oxidation processes for decolorization of aqueous solution containing acid red G azo dye

Some investigations concerning the decolorization of Acid Red G azo dye by photooxidation with hydrogen peroxide were performed. The influences of pH, oxidant concentration, and the presence of Fe²⁺ or other metal ions (Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺) as potential catalysts, were investigated. The best results were obtained in the presence of ferrous ions in acid and neutral media. The other ions are not as effective as Fe²⁺ for dye decolorization. Co²⁺ and Cu²⁺ ions have a catalytic action, at low concentration, within a wide range of pH. Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid pH values, but show a weak action in alkaline media.     

Synthesis and evaluation of a new water-soluble fluorescent red dye,xanthene bis-C-glycoside

Condensation of 2 eq. of C-β-D-glucosylphloroacetophenone with glyoxylic acid in an aqueous solution of Na₂CO₃, followed by air oxidation in MeOH in the presence of 11 eq. of pyridine to afford a 36% yield of a bright red dye, xanthene bis-C-glycoside. This dye is 10 times more fluorescent (Φ_{f [EtOH]}^{581 nm} = 3.9 × 10⁻²) and 7.5 times more water-soluble (57 mg/mL H₂O) than the natural red pigment, carthamin. Detailed NMR analysis of its methyl analogs was used to confirm the structure of the dye as methyl 4,5-diacetyl-1,3,8-trihydroxy-3-oxo-3H-2,7-di-C-β-D-glucopyranosylxanthene-9-carboxylate from among three possible ring-closure isomers. Xanthene is safe and shows high light-resistance; therefore, xanthene bis-C-glycoside could be used as a food colorant or an in vivo probe.     

Fluorescein dye derivative: Synthesis,characterization, quantum chemical and promising antimicrobial activity studies

The dimethyl sulfite as an alkylating as well as alkoxylating reagent is well known in synthetic organic as well as organometallic chemistry for a long time. Herein, we have utilized dimethyl sulfite as an alkylating reagent and reacted with fluorescein derivative, N-fluorescein-lactam-hydrazine ( B ). This reaction leads to the generation of tetramethylated fluorescein lactam hydrazine ( A ). The newly designed and synthesized molecule ( A ) has been characterized by ¹H, ¹³C NMR and HRMS data. The antimicrobial activity of the synthesized alkylated fluorescein derivative has been tested against E. coli, P. aeruginosa, Salmonella typhimurium and S. aureus microbial agents. Time-kill assay results also confirmed that fluorescein derivative is a potent antimicrobial agent and revealed that the time-kill assay of fluorescein derivative is value-added than the well-known antibiotic. In addition, quantum chemical study was used to analyze its activity trend and correlated with the experimental data. The computed results of DFT revealed that the lipophilicity as well as the LUMO-HOMO band gap (ΔE_LUMO-HOMO = 4.75 eV) of compound A make it more suitable as an antimicrobial agent to match with in vitro antimicrobial experimental results. The MIC and MBC values of compound A were observed to be lower in contrast to fluorescein and ampicillin for all the tested bacterial strains, which were approximately 3- to 4-fold lower than MIC and MBC values of the later. Results obtained from the study clearly indicate that compound A has better antimicrobial and bactericidal activity in comparison to ampicillin and fluorescein. Synthesized compound can be a better substitute of traditionally used antibiotics, Ampicillin.     

A kinetic approach for the mechanism of malachite green-peroxydisulphate reaction in aqueous solution

The oxidation kinetics of malachite green (MG) with peroxydisulphate ion (PDS) were investigated by monitoring the absorbance change at 618 nm, in aqueous solutions under buffered and unbuffered conditions. Under both conditions, the reaction had first order dependence on reductant and a fractional order (one half) dependence on the oxidant. The stoichiometric ratio between MG and PDS was 1:2. The reaction had a negative salt effect. Reaction rates were enhanced under both high or low pH relative to neutral conditions. A plausible mechanism is proposed.     

Synthesis and characterization of CoFe2O4@SiO2-polyethyleneimine magnetic nanoparticle and its application for ultrasonic-assisted removal of disulfine blue dye from aqueous solution

In the present work, a simple synthesis approach was applied for the fabrication of CoFe₂O₄@SiO₂-polyethyleneimine magnetic nanoparticles as an effective sorbent for ultrasonic-assisted removal of disulfine blue dye from an aqueous solution. For identification and characterization of prepared sorbent, different analysis including Fourier transform infrared spectroscopy (FT-IR), Field emission scanning electron microscopy (FE-SEM), Vibrating sample magnetometer (VSM), Energy dispersive X-ray analysis (EDX) and Transmission electron microscopy (TEM) were applied. The effect of effective parameters on the removal of disulfine blue such as pH, sorbent mass, ultrasonic time and disulfine blue concentration were also assessed. The optimum values for investigated parameters were achieved to be as follows: pH of 5.0, sorbent mass of 0.015 g, ultrasonic time of 5.0 min and disulfine blue concentration of 10.0 mg L⁻¹. Different isotherm and kinetic models were used for the evaluation of isotherm and kinetic of adsorption. Results showed that the Langmuir isotherm model was better than other isotherm models as well as the second-order equation model was selected as a kinetic model. The maximum adsorption capacity of the proposed magnetic sorbent was achieved to be 110.0 mg g⁻¹ which shows the applicability of proposed sorbent for removal of disulfine blue dye from aqueous solution.     

Photocatalytic degradation of carcinogenic Congo red dye in aqueous solution,antioxidant activity and bactericidal effect of NiO nanoparticles

Journal of the Iranian Chemical Society - Face-centered cubic structure of nickel oxide (NiO) nanoparticles with 30 nm average size was synthesized by co-precipitation method with some...     

Synthesis, pH-dependent structural characterization, and solution behavior of aqueous aluminum and gallium citrate complexes

Reactions of Al(III) and Ga(III) with citric acid in aqueous solutions, yielded the complexes (NH(4))(5)[M(C(6)H(4)O(7))(2)].2H(2)O (M(III) = Al (1), Ga (2)) at alkaline pH, and the complexes (Cat)(4)[M(C(6)H(5)O(7))(C(6)H(4)O(7))].nH(2)O (M(III) = Al (3), Ga (4), Cat. = NH(4)(+), n = 3; M(III) = Al (5), Ga (6), Cat. = K(+), n = 4) at acidic pH. All compounds were characterized by spectroscopic (FT-IR, (1)H, (13)C, and (27)Al NMR, (13)C-MAS NMR) and X-ray techniques. Complex 1 crystallizes in space group P1, with a = 9.638(5) A, b = 9.715(5) A, c = 7.237(4) A, alpha = 90.96(1) degrees, beta = 105.72(1) degrees, gamma = 119.74(1) degrees, V = 557.1(3) A(3), and Z = 1. Complex 2 crystallizes in space group P1, with a = 9.659(6) A, b = 9.762(7) A, c = 7.258(5) A, alpha = 90.95(2) degrees, beta = 105.86(2) degrees, gamma = 119.28(1) degrees, V = 564.9(7) A(3), and Z = 1. Complex 3 crystallizes in space group I2/a, with a = 19.347(3) A, b = 9.857(1) A, c = 23.412(4) A, beta = 100.549(5) degrees, V = 4389(1) A(3), and Z = 8. Complex 4 crystallizes in space group I2/a, with a = 19.275(1) A, b = 9.9697(6) A, c = 23.476(1) A, beta = 100.694(2) degrees, V = 4432.8(5) A(3), and Z = 8. Complex 5 crystallizes in space group P1, with a = 7.316(1) A, b = 9.454(2) A, c = 9.569(2) A, alpha = 64.218(4) degrees, beta = 69.872(3) degrees, gamma = 69.985(4) degrees, V = 544.9(2) A(3), and Z = 1. Complex 6 crystallizes in space group P1, with a = 7.3242(2) A, b = 9.4363(5) A, c = 9.6435(5) A, alpha = 63.751(2) degrees, beta = 70.091(2) degrees, gamma = 69.941(2) degrees, V = 547.22(4) A(3), and Z = 1. The crystal structures of 1-6 reveal mononuclear octahedral complexes of Al(III) (or Ga(III)) bound to two citrates. Solution NMR, on both 4- and 5- species, reveals rapid intramolecular exchange of the bound and unbound terminal carboxylates. Upon dissolution in water, the complexes, through a complicated reaction cascade, transform to oligonuclear 1:1 species that, in agreement with previous studies, represent the thermodynamically stable state in solution. The data provide, for the first time, structural details of low MW, mononuclear complexes of Al(III) (or Ga(III)) with citrate that are dictated, among other factors, by pH. The properties of 1-6 may provide clues relevant to their biological association with humans.     

Nitrate removal from aqueous solution using watermelon rind derived biochar-supported ZrO2 nanomaterial: Synthesis,characterization, and mechanism

Recently, biochar has attracted tremendous research interest for environmental applications. In this study, biochar-derived watermelon rind (WM) was produced via optimal pyrolysis at 500 °C for 2 h, and then improved the adsorption capacity by Zirconium oxide nanoparticles (ZrO₂ NPs). The WM@ZrO₂ was characterized using X-ray diffraction (XRD), Scanning electron microscopic - Energy-dispersive X-ray spectroscopy (SEM-EDS), and Fourier transform infrared (FTIR). The adsorptive capacities of synthesized ZrO₂ NPs were investigated for nitrate as a function of pH, adsorbent dosage, contact time, initial adsorbate concentration, and pyrolysis temperature in the batch experiment. The results showed that a Langmuir isotherm and a pseudo-second-order kinetics model were the best-fit for experimental nitrate data in its non-linear form as correlation coefficients (R²) were 0.985 and 0.998, respectively. The maximum adsorption capacity for the Langmuir isotherm model was 15.196 mg g^?1. The proposed mechanism, including electrostatic attraction and ligand exchange, played a dominant role in nitrate adsorption. After testing with the real domestic wastewater, the removal of nitrate for WM@ZrO₂ was achieved at 78 %, which was equivalent to the adsorption capacity of 8.1 mg g^?1 of adsorbent. Overall, the WM@ZrO₂ is proposed as a promising, effective, and environmentally friendly adsorbent in removing nitrate from an aqueous solution.     

Synthesis, characterization, and adsorption behavior of aniline modified polystyrene resin for phenol in hexane and in aqueous solution

Macroporous crosslinked poly(p-vinylbenzylaniline) (PVBA) was synthesized and its adsorption isotherms for phenol in hexane and in aqueous solution were comparatively measured. It was shown that the adsorption isotherms in hexane were straight lines and passed through the origin, whereas those in aqueous solution could be simulated by Freundlich isotherms. Adsorption enthalpies of phenol onto PVBA were calculated, and the results indicated that the adsorption was an exothermic process. Comparison of the adsorption behaviors of PVBA, poly(p-vinylbenzylmethylamine) (PVBMA), and poly(p-vinylbenzyl-p-nitroaniline) (PVBNA) for phenol in hexane suggested that hydrogen bonding and pi-pi stacking were primarily responsible for the adsorption, the nitrogen atom and benzene ring of PVBA acted as hydrogen bonding acceptors and formed hydrogen bonding with the hydrogen atom of hydroxyl group of phenol. Investigation of the adsorption mechanism in aqueous solution revealed that hydrogen bonding and hydrophobic interaction were the main driving forces.     

Synthesis, characterization and enhanced photoconductivity from a mesoporous titania on dye doping

New wormhole-like mesoporous TiO₂ material has been synthesized through a convenient sol-gel method in the presence of a Schiff base secondary amine hexadecyl-2-pyrrole-methylamine (HPMA) containing chelating donor sites as template or structure directing agent (SDA). SDA molecules can be easily removed from the composite to generate mesoporosity and upon removal of the SDA molecule, this mesoporous TiO₂ material showed very high surface area (480 ± 10 m²/g) with an average pore diameter of 2.57 ± 0.05 nm. When Rose Bengal dye is entrapped inside the nanopores of this material, it showed a drastic enhancement (ca. 40-folds) in the photoconductivity vis-à-vis mesoporous TiO₂ alone under white light illumination.