Electrosynthesis and electrochromic properties of free‐standing copolymer based on oligo(oxyethylene) cross‐linked 2,2’‐bithiophene and 3,4‐ethylenedioxythiophene

Oligo(oxyethylene) chains cross‐linked 2,2’‐bithiophene (BT‐E5‐BT) has been synthesized successfully. A free‐standing copolymer film based on BT‐E5‐BT and 3,4‐ethylenedioxythiophene (P(BT‐E5‐BT‐co‐EDOT)) has been synthesized by electrochemical polymerization. The electrical conductivity of P(BT‐E5‐BT‐co‐EDOT) copolymer (16 S m^?1) has improved by four orders of magnitude compared to the homopolymer of BT‐E5‐BT (P(BT‐E5‐BT), 5 × 10^?3 S m^?1) at room temperature. Both homopolymer and copolymer films exhibit well‐defined redox and satisfied coloration efficiency. Spectroelectrochemistry studies indicate that the P(BT‐E5‐BT‐co‐EDOT) has a lower band gap in the range of 1.83–1.90 eV and shows more plentiful electrochromic colours (green, blue, purple and salmon pink) compared with the homopolymer P(BT‐E5‐BT). The Copolymer P(BT‐E5‐BT‐co‐EDOT) shows the moderate optical contrast (26% of 480 nm) and coloration efficiency (205.41 cm^?1 C^?2). The copolymer method provides a novel way to fabricate a free‐standing organic electrochromic device. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1583–1592     

Alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole: Synthesis,characterization and photovoltaic properties

A series of alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole (BT), PV‐BT, DP‐BT, and TP‐BT, were synthesized by Heck coupling reaction. UV–vis absorption and fluorescence spectra show that the copolymerization of electron‐rich diphenylamine (DP), triphenylamine (TP), MEH‐PV (PV), and electron‐deficient BT results in low‐bandgap conjugated polymers. Within the three copolymers of PV‐BT, DP‐BT, and TP‐BT, TP‐BT possesses the highest hole mobility of 4.68 × 10^{? 5} cm²/V, as determined from the space charge limited current (SCLC) model. The bulk heterojunction‐typed polymer solar cells (PSCs) were fabricated with the blend of the copolymers and PCBM as the photosensitive layer. The power conversion efficiencies (PCE) of the PSCs based on PV‐BT, DP‐BT, and TP‐BT reached 0.26%, 0.39%, and 0.52%, respectively, under the illumination of AM 1.5, 100 mW/cm². The results indicate that TP‐BT is a promising photovoltaic polymer for PSCs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3861–3871, 2007     

Effect of copolymerized butylene terephthalate chains on polymorphism and enzymatic degradation of poly(butylene adipate)

The introduction of aromatic butylene terephthalate (BT) units into the backbone chains of aliphatic poly(butylene adipate) (PBA) not only changes the mechanical performance of the resultant P(BA-co-BT) copolymers but also affects their biodegradability. Because of the polymorphism of PBA homopolymer, the copolymerized BT units may also influence the polymorphic crystal structure as well as the biodegradation behavior. In this work, three P(BA-co-BT) copolymers with BT contents as 10, 20, and 25 mol% were chosen to study their polymorphic crystal structure, thermal properties and enzymatic degradation by means of wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC) and gravimetric methods. The results reveal that the P(BA-co-BT) copolymers with BT contents below 25 mol% can form polymorphic crystal structures after melt-crystallization at different temperatures. However, the recrystallization and transformation of polymorphic crystals are strongly affected by the rigid BT units. The enzymatic degradation rates of P(BA-co-BT) copolymers decrease with increasing the BT contents. The influences of the BT units on the polymorphism and enzymatic degradation are discussed in terms of the motion of PBA chains that copolymerized with BT units. It has been concluded from the examination of solid-state microstructure that the influence of the aromatic BT units on the motion of biodegradable PBA chains heavily influences the biodegradability.     

Enhanced Charge Transfer,Transport and Photovoltaic Efficiency in All‐Polymer Organic Solar Cells by Polymer Backbone Fluorination

We successfully designed and synthesized two BDT‐BT‐T (BDT=benzo[1,2‐b:4,5‐b']dithiophene, BT‐T=4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole) based polymers as the electron donor for application in all‐polymer solar cells (all‐PSCs). By adopting N2200 as the electron acceptor, we systematically investigated the impact of fluorination on the charge transfer, transport, blend morphology and photovoltaic properties of the relevant all‐PSCs. A best power conversion efficiency (PCE) of 3.4% was obtained for fluorinated PT‐BT2F/N2200 (BT2F=difluorobenzo[c][1,2,5]thiadiazole) all‐PSCs in comparison with that of 2.7% in non‐fluorinated PT‐BT/N2200 (BT=benzothiadiazole) based device. Herein, all‐polymers blends adopting either non‐fluorinated PT‐BT or fluorinated PT‐BT2F exhibit similar morphology features. In depth optical spectrum measurements demonstrate that molecular fluorination can further enhance charge transfer between donor and acceptor polymer. Moreover, all‐polymer blends exhibit improved hole mobilities and more balanced carriers transport when adopting fluorinated donor polymer PT‐BT2F. Therefore, although the PCE is relatively low, our findings may become important in understanding how subtle changes in molecular structure impact relevant optoelectronic properties and further improve the performance of all‐PSCSs.     

Chemical Preparation of Ferroelectric Mesoporous Barium Titanate Thin Films: Drastic Enhancement of Curie Temperature Induced by Mesopore‐Derived Strain

Mesoporous barium titanate (BT) thin films are synthesized by a surfactant‐assisted sol–gel method. The obtained mesoporous BT thin films show enhanced ferroelectricity due to the effective strains induced by mesopores. The Curie temperature (T_c) of the mesoporous BT reaches approximately 470 °C.     

末端功能基团对聚（3-丁基噻吩）光电性能的影响

研究了4种带有不同末端基团的聚(3-丁基噻吩)(P3BT)的光电性能。结果表明,末端基团对P3BT的结晶有一定的抑制作用,可以改变P3BT的表面能,从而有效调控P3BT∶PCBM共混体系相容性以及薄膜的形貌,并影响以P3BT为给体材料的聚合物光伏器件的性能。其中,带有较短烷基链末端基团的烯丙基封端P3BT具有较高的结晶性,与PCBM具有适中的相容性,使得光伏器件的光敏层能够形成理想的微相分离结构,器件效率可以达到3.1%,较传统的溴封端P3BT器件效率提升35%以上。     

Brain tumor diagnostic model and dietary effect based on extracellular vesicle microbiome data in serum

The human microbiome has been recently associated with human health and disease. Brain tumors (BTs) are a particularly difficult condition to directly link to the microbiome, as microorganisms cannot generally cross the blood–brain barrier (BBB). However, some nanosized extracellular vesicles (EVs) released from microorganisms can cross the BBB and enter the brain. Therefore, we conducted metagenomic analysis of microbial EVs in both serum (152 BT patients and 198 healthy controls (HC)) and brain tissue (5 BT patients and 5 HC) samples based on the V3–V4 regions of 16S rDNA. We then developed diagnostic models through logistic regression and machine learning algorithms using serum EV metagenomic data to assess the ability of various dietary supplements to reduce BT risk in vivo. Models incorporating the stepwise method and the linear discriminant analysis effect size (LEfSe) method yielded 12 and 29 significant genera as potential biomarkers, respectively. Models using the selected biomarkers yielded areas under the curves (AUCs) >0.93, and the model using machine learning resulted in an AUC of 0.99. In addition, Dialister and [Eubacterium] rectale were significantly lower in both blood and tissue samples of BT patients than in those of HCs. In vivo tests showed that BT risk was decreased through the addition of sorghum, brown rice oil, and garlic but conversely increased by the addition of bellflower and pear. In conclusion, serum EV metagenomics shows promise as a rich data source for highly accurate detection of BT risk, and several foods have potential for mitigating BT risk.Subject terms: Diagnostic markers, Machine learning     

Accumulation of butyltin compounds in dolphins stranded along the Mediterranean coasts

Concentrations of tributyltin (TBT) and its degradation products, monobutyltin (MBT) and dibutyltin (DBT), were determined in the liver and kidney of striped dolphins ( Stenella coeruleoalba), bottlenose dolphins ( Tursiops truncatus) and in a fetus of the common dolphin (Delphinus delphi) found stranded along the western Italian and Greek coasts in the period 1992–1994. Butyltin (BT) compounds were detected in almost all the samples analyzed and were higher in the kidney than in the liver. Total BT concentrations were 0.78–8.05 μg g⁻¹ wet wt in kidney and 0.015–1.02 μg g⁻¹ wet wt in liver of S. coeruloealba. Bottlenose dolphins had lower BT concentrations than striped dolphins. Although only one fetal sample was analyzed, it showed the highest BT concentrations of all. Unlike BT concentrations in the other adult dolphins, in the pregnant dolphin they were higher in the liver (4.35 μg g⁻¹ wet wt), suggesting that BTs are transferred from mother to fetus. No significant differences in BT concentrations were found between sexes. Of the breakdown products, DBT was predominant in most liver samples and MBT was more abundant in kidney. Although BT concentrations are known to be found in cetaceans inhabiting waters of developed countries, our observations strongly suggest that concentrations found in S. coeruleoalba were either similar to or higher than those reported for other Stenella species collected from coastal areas close to harbors or marinas. Copyright © 2000 John Wiley & Sons, Ltd.     

New rare earth metal complexes with nitrogen-rich ligands: 5,5'-bitetrazolate and 1,3-bis(tetrazol-5-yl)triazenate-on the borderline between coordination and the formation of salt-like compounds

From the two nitrogen-rich ligands BT(2-) (BT=5,5'-bitetrazole) and BTT(3-) (BTT=1,3-bis(1H-tetrazol-5-yl)triazene), a series of novel rare earth metal complexes were synthesised. For the BT ligand, a vast number of these complexes could be structurally characterised by single-crystal XRD, revealing structures ranging from discrete molecular aggregates to salt-like compounds. The isomorphous complexes [La2(BT)3]14 H2O (1) and [Ce2(BT)3]14 H2O (2) reveal discrete molecules in which one BT(2-) acts as a bridging ligand and two BT groups as chelating ligands. The complexes, [M(BT)(H2O)7]2[BT] x (x) H2O (3-5), (M=Nd (3), Sm (4), and Eu (5)), are also isomorphous and consist of [M(BT)(H2O)7]+ ions in which only one BT(2-) acts as a chelate ligand for each metal centre. [Tb(H2O)8]2[BT]3 x H2O (6) and [Er(H2O)8](2)[BT](3)x H2O (7) are salt-like compounds that do not exhibit any significant metal-nitrogen contacts. In the BTT-samarium compound 9, discrete molecules were found in which BTT(3-) acts as a tridentate ligand with three Sm--N bonds.     

Ganglioside–liposome immunoassay for the detection of botulinum toxin

A rapid and highly sensitive receptor immunoassay for botulinum toxin (BT) has been developed using ganglioside-incorporated liposomes. Botulism outbreaks are relatively rare, but their results can be very severe, usually leading to death from respiratory failure. To exert their toxicity, the biological toxins must first bind to receptors on the cell surface, and the trisialoganglioside GT1b has been identified as the cell receptor for BT. Therefore, in this study, GT1b was used to prepare the ganglioside–liposomes by spontaneous insertion into the phospholipid bilayer. In a sandwich-based, hybrid receptor immunoassay, BT is detected as a colored band on a nitrocellulose membrane strip, where BT bound to the GT1b-liposomes are captured by anti-BT antibodies immobilized in a band across the strip. The intensity of the colored band can be visually estimated, or measured by densitometry using computer software. The limit of detection (LOD) for BT in the lateral-flow assay system was 15 pg mL^–1, which is comparable to the limits of detection achieved with the most sensitive assays previously reported. However, this rapid assay can be completed in less than 20 min. These results demonstrate that the sandwich assay using GT1b-liposomes for detection of BT is rapid and very sensitive, suggesting the possibility for detecting BT in field screening, simply and reliably, without the need for complex instrumentation.     

Diphenol miscibility effect on the immiscible polyester/polyether binary blends through intermolecular hydrogen‐bonding interaction

Miscibility and hydrogen bonding interaction have been investigated for the binary blends of poly(butylene adipate‐co‐44 mol % butylene terephthalate)[P(BA‐co‐BT)] with 4,4'‐thiodiphenol (TDP) and poly(ethylene‐ oxide)(PEO) with TDP; and the ternary blends of P(BA‐co‐BT)/PEO/TDP by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The DSC results indicated that the binary blends of P(BA‐co‐BT)/TDP and PEO/TDP were miscible because each blend showed only one composition‐dependent glass‐transition over the entire range of the blend composition. The formation of intermolecular hydrogen bonds between the hydroxyl groups of TDP and the carbonyl groups of P(BA‐co‐BT), and between the hydroxyl groups of TDP and the ether groups of PEO was confirmed by the FTIR spectra. According to the glass‐transition temperature measured by DSC, P(BA‐co‐BT) and PEO, their binary blends were immiscible over the entire range of blend composition, however, the miscibility between P(BA‐co‐BT) and PEO was enhanced through the TDP‐mediated intermolecular hydrogen bonding interaction. It was concluded that TDP content of about 5–10% may possibily enhance miscibility between P(BA‐co‐BT) and PEO via a hydrogen bonding interaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2971–2982, 2004     

Ternary Donor–Insulator–Acceptor Systems for Polymer Solar Cells

A series of block copolymers with fixed length of the semiconductor‐block poly(3‐butylthiophene) (P3BT) and varying length of the insulator‐block polystyrene (PS) are synthesized. These copolymers are blended with phenyl‐C61‐butyric acid methyl ester (PCBM) for the bulk heterojunction photoactive layers. With appropriate insulator‐block length and donor–acceptor ratio, the power conversion efficiency increases by one order of magnitude compared with reference devices with pure P3BT/PCBM. PS blocks improve the miscibility of the active layer blends remarkably. The P3BT‐b‐PS crystallizes as nanorods with the P3BT core covered with the PS‐block, which creates a nanoscale tunneling barrier between donor and acceptor leading to more efficient transportation of charge carriers in the semiconductors.     

Effect of BiFeO3 doping on ferroelectric properties of Na0.5Bi0.5TiO3–BaTiO3 based thin film derived by sol–gel method

0.94Na_0.5Bi_0.5TiO₃–0.06BaTiO₃ (NBT–6BT) and (0.94 ? x)Na_0.5Bi_0.5TiO₃–0.06BaTiO₃–xBiFeO₃ (NBT–6BT–xBFO, x = 0.03, 0.05 and 0.08) thin films were deposited on Pt/Ti/SiO₂/Si substrates by a sol–gel process. Relative permittivity and remnant polarization were maximized at 5 % BFO substitution. Compared with 0.94NBT–0.06BT, the leakage current density of 0.89NBT–0.06BT–0.05BFO at 600 kV/cm is reduced by one order of magnitude. Enhanced ferroelectricity was also achieved in 0.89NBT–0.06BT–0.05BFO, the remnant polarization (2P _r) values of 0.89NBT–0.06BT–0.05BFO and 0.94NBT–0.06BT are 46 and 24 µC/cm².     

Characterization of conducting copolymers of 2,2′-bithiophene and pyrrole by cyclic voltammetry and UV/visible spectroscopy

Several polymers have been prepared by electropolymerization of mixtures of pyrrole (PY) and 2,2′-bithiophene (BT). Cyclic voltammetry on prepared polymer films shows three anodic oxidation peaks, two of which match the oxidation potentials of homopolymeric PY and BT, and a third which is intermediate. UV/visible spectroscopy displays a unique spectrum for each of the reduced and oxidized forms of these polymers. Nernstian plots from UV/visible data exhibit three well-defined redox couples in polymer films produced at 1.3 V. Overall, the data strongly support the formation of a copolymer, consisting of three distinct oxidizable units. Two of these can be attributed to short blocks of either PY or BT, and a third to random and alternate groupings of PY and BT. The polymers produced are electrically conductive, but the conductivity drops rapidly as BT units are introduced into a homopolymer of PY. © 1992 John Wiley & Sons, Inc.     

Formation of Al2O3–BaTiO3 nanocomposite oxide films on etched aluminum foil by sol–gel coating and anodizing

Barium titanate BaTiO₃ (BT) sol was dip-coated on the etched aluminum foils by a sol–gel process. After annealed at 600 °C in air, the foils were anodized in ammonium adipate solution. The voltage–time variations during anodizing were monitored. The structure, composition, and electric properties of the anodic foils were investigated. The obtained foils were fabricated into aluminum electrolytic capacitors and the load and shelf life test were measured. It was found that the slope of the voltage–time curve of aluminum foil covered with BT films became steeper. A triple layer of Al/Al₂O₃/BT was formed after anodizing Al/BT foil. The specific capacitance and the product of specific capacitance and withstanding voltage of anodic foil with a BT coating were about 46.36% and 38.90% larger than that without a BT coating. After the load life and shelf life of 2500 h at 85 °C, two kinds of capacitors have similar behaviores and meet with Nichicon standard of Japan. From the results, BaTiO₃ is promising to be used as the dielectric of aluminum electrolytic capacitor to increase the specific capacitance.     

三种不同晶型二氧化钛的制备及光催化性能研究

分别以Ti(SO₄)₂和TiCl₄为原料,通过水热pH值的控制,批量制备了片状的锐钛矿(AT)、棒状的金红石(RT)和菱形的板钛矿型(BT)TiO₂.其中,AT具有最小的晶粒尺寸(约10nm),其次为RT(30—50nm),而BT具有最大的晶粒尺寸(50—70nm).固体漫反射显示出AT、BT和RT对光响应的阀值分别为375nm、385nm和415nm.其中,AT在紫外区显示出最强的光吸收能力.以阴离子活性染料X3B为目标分子的光催化降解实验结果显示,3种催化剂的光活性次序为AT>RT>BT,这与它们对X3B的吸附能力一致.文章对这产生TiO₂光活性差异的原因进行了讨论.     

Novel saturated red‐emitting poly(p‐phenylenevinylene) copolymers with narrow‐band‐gap units of 2,1,3‐benzothiadiazole synthesized by a palladium‐catalyzed Stille coupling reaction

Novel poly(p‐phenylenevinylene) (PPV) copolymers derived from 1‐methoxy‐4‐octyloxyphenylene (MOP), 2,1,3‐benzothiadiazole (BT), and trans‐1,2‐bis(tributylstannyl)ethylene were first prepared by a palladium‐catalyzed Stille coupling reaction. The feed ratios of MOP to BT were 99.5:0.5, 99:1, 95:5, 85:15, 70:30, and 50:50. An efficient energy transfer from the 2‐methoxy‐5‐octyloxy‐p‐phenylenevinylene segment to the narrow‐band‐gap units was observed. The poly(2‐methoxy‐5‐octyloxy‐p‐phenylenevinylene‐2,1,3‐benzothiadiazolevinylene) copolymers emitted deep red light. The maximum electroluminescence emission of these PPV copolymers occurred at 659–724 nm and was accompanied by gradual redshifting with an increasing BT concentration. The photophysical properties were examined in comparison with those of copolymers based on BT and fluorene or N‐alkylcarbazole doped with the same BT concentration in the copolymer main chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2325‐2336, 2005     

Reaction of benzoyl peroxide with n-butyl orthotitanate

Conclusions n-Butyl orthotitanate (BT) reacts with a stoichiometric amount of benzoyl peroxide (BP) to form complexes of composition [3BT·BP] and [BT·BP]. The fastest decomposition of BP proceeds via the [3BT-BP] complex, i. e., with an excess of BT relative to BP. Butoxyl radicals are formed during the decomposition of the complexes. The end product when BP is decomposed by BT is di-n-butoxytitanium dibenzoate, which does not accelerate the decomposition of BP.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 714–717, March, 1978.     

PVT measurements on n -octyl-isothiocyanato-biphenyl (8BT) at elevated pressures

For the first time pressure-volume-temperature (PVT) measurements for the crystal-like smectic E phase have been performed. The phase diagram of 4′-n -octyl-4-isothiocyanatobiphenyl 8BT has been recently established using differential thermal analysis up to 250 MPa. 8BT exhibits a splitting of the clearing line above 170 MPa. PVT data have been measured in the same pressure range for temperatures between 313 and 393 K. Volume and enthalpy changes accompanying the clearing line of 8BT are also presented. The configurational part of the entropy change at the CrE-I transition of 8BT amounts to ≈ 60%. Using the PVT data and recently published dielectric relaxation results, the isochoric activation energy was calculated (giving ≈ 50% of the activation enthalpy); this is compared with analogous results for other liquid crystals.     

末端功能基团对聚（3-丁基噻吩）光电性能的影响

研究了4种带有不同末端基团的聚（3-丁基噻吩）（P3BT）的光电性能。 结果表明,末端基团对P3BT的结晶有一定的抑制作用,可以改变P3BT的表面能,从而有效调控P3BT∶PCBM共混体系相容性以及薄膜的形貌,并影响以P3BT为给体材料的聚合物光伏器件的性能。 其中,带有较短烷基链末端基团的烯丙基封端P3BT具有较高的结晶性,与PCBM具有适中的相容性,使得光伏器件的光敏层能够形成理想的微相分离结构,器件效率可以达到3.1%,较传统的溴封端P3BT器件效率提升35%以上。