High-electromagnetic-shielding cotton fabric prepared using multiwall carbon nanotubes/nickel–phosphorus electroless plating

High-electromagnetic-shielding cotton fabric (CF) was prepared using carboxyl-functionalized multiwall carbon nanotubes (MWCNTs-COOH)/nickel–phosphorus (Ni-P) electroless plating. Firstly, MWCNTs-COOH was loaded on CF used to chelate the metal catalyst followed by electroless plating to impart outstanding electrical conductivity and electromagnetic shielding properties. The intermediate MWCNTs-COOH layer not only improves the bonding strength via the chelating effect, but also can be used as a conductive material. This synergistic action of MWCNTs-COOH and Ni-P layer can work together to improve the electromagnetic interference shielding performance. The features of Ni-P/MWCNTs-COOH/CF were characterized using scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction. The resulting Ni-P/MWCNTs-COOH/CF fabrics show high surface resistance of 1.66 Ω sq⁻¹ and robust electromagnetic shielding effectiveness of 40.2 dB. Furthermore, benefiting from the strong interface interaction, the as-prepared composite fabrics retain stable performances after undergoing a series of physical and chemical tests, confirming promising practical applications even under harsh conditions.     

Antibacterial glass films prepared on metal surfaces by sol–gel method

This paper describes the preparation and characterization of glass films consisting of SiO₂, Li₂O, Na₂O, K₂O or MgO in varying compositions on stainless steel and aluminum substrates by sol–gel method. Silver phosphate or silver incorporated zeolite was also introduced into the sols for obtaining antibacterial effect. The SiO₂/Li₂O/Na₂O system having the composition of 85:5:10 wt% was found as the optimum for obtaining a stable sol and film formation. The films were investigated by scanning electron microscopy (SEM) and electron dispersive analysis by X-ray (EDX), Fourier transformed infrared (FTIR) spectroscopy, thermo-gravimetric analysis (TGA) and differential thermal analysis (DTA). Homogenous films having 300 ± 20 nm thicknesses were formed by spin coating and then by curing at 500 °C for 1 h. Obtained films had high adherence to the metal substrates and they were also durable in acidic, basic or NaCl environments. They also presented a powerful antibacterial effect against E. coli.     

Electrode grafting by oxidation of an amine catalyzed by a ferrocenyl “antenna” through intramolecular electron transfer

Two aminoferrocene complexes were studied by electrochemical techniques. Molecules retain the redox properties of both ferrocene and amine groups, but fundamentally different behaviours were observed depending on whether the linker between the two redox end groups was saturated (ethyl bridge) or not (ethynyl bridge). The possibility of an intramolecular electron transfer from the amine to the ferricenium moiety through the π-conjugated linker was demonstrated and the ethynyl bridge is expected to have a dual effect by facilitating both the oxidation of the amine into the cation radical and the production of aminyl radical, due to its strong electron withdrawing effect. Because of this synergy of properties, grafting of the conjugated aminoferrocene complex can occur just by oxidizing the ferrocene group without the presence of a base in solution.     

TG of a cotton fabric impregnated by sodium borate decahydrate (Na2B4O7·10H2O) as a flame-retardant

The effect of sodium borate decahydrate as a nondurable treatment on the flammability of 100% cotton fabric (woven plain 150 g m⁻²) has been investigated in this paper. The laundered bone-dried massed samples were impregnated with suitable concentrations of sodium borate decahydrate. Each bunches of fabrics were dipped into individual aqueous solutions of the salt, followed by means of squeeze rolls and drying at 110°C. By using a ‘vertical flame spread test’ the optimum add-on values to impart flame-retardancy onto cotton fabric was determined to be as 4.24 g salt per 100 g fabric. The objective of this study is thermogravimetry (TG) investigation of pure cotton, treated one with the salt at its optimum efficiency. So that outcomes could be compared and commented, finally the results obtained are in favor of ‘Chemical action theory’, ‘Condensed phase retardation’, ‘Dust or wall effect theory’ and also ‘Gas dilution theory’.     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Thermogravimetry studies of cotton fabric’s flame-retardancy by means of synergism of lithium bromide and antimony trioxide

The synergism of lithium bromide and antimony trioxide on the flame-retardancy of a cotton fabric (woven, plain 150 g m²) has been investigated in this study. The impregnations of cotton fabric with suitable individual additives and/or their appropriate admixed formulation were carried out. The flammability test has also been fulfilled using described procedure, in the earlier published articles. Their outcomes comply with thermogravimetry’s data. Moreover the latest mentioned outcomes support the catalytic effect of this synergism. Explanation of the data could be in favor of existing flame-retardation’s theories. Ultimately this synergism is in compliance with the green chemistry and economical viewpoints.     

Formation of antifouling functional coating from deposition of a zwitterionic-co-nonionic polymer via “grafting to” approach

We develop a new process for the preparation of synergistic antifouling functional coatings on gold surfaces via a “grafting to” approach. The strategy includes a synthetic step of polymer brushes that consist of poly (ethylene glycol) (PEG) and zwitterionic side chains via a typical reversible-addition fragmentation chain transfer (RAFT) polymerization process, and a subsequent deposition of the polymer brushes onto a gold substrate. The presence of PEG and zwitterion chains on these polymer brush-coated gold surfaces has been proved to have a synergistic effect on the final antifouling property of the coating. PEG chains lower the electrostatic repulsion between zwitterionic polymer chains and increase their graft density on gold surfaces, while zwitterionic polymer effectively improves the antifouling property that is offered by PEG chains alone. Protein adsorption and cell attachment assays tests are conducted to confirm that this copolymer layer on gold surface has a pronounced resistance against proteins such as Bovine serum albumin and Lysozyme. Importantly, the antifouling property can be systematically adjusted by varying the molar ratio of PEG to zwitterionic chains in the final coating copolymer.     

Gradient and patterned polymer brushes by photoinitiated “grafting through” approach

More than 2 decades of active investigations in the field of polymer brushes have revealed continuous and growing interest in different aspects of synthesis, properties, and applications of tethered polymers. In this article, we report on our recent advances in brush synthesis. The method we explore is based on the combination of “grafting through” approach with the functional anchoring polymer layer technique. We introduce the photoinitiated “version” of synthesis of polyacrylamide brushes. Both homogeneous depositions and laterally resolved gradient and patterned samples have been prepared by this technique. The results for flat polymer brushes, that is, thickness, stability, and contact angles, are complimented by kinetic parameters as deducted from analysis of gradient samples obtained by the method of a sliding mask. A microscopic shadow mask is used to fabricate patterned brushes. The microscopically patterned brushes demonstrate high lateral resolution limited by optical phenomena. Finally, we have performed a viability assaying of neuronal cell on both flat and patterned brushes. Sufficient restraint of cell adhesion on polyacrylamide photobrushes and very low cytotoxicity of the brush components (polymer brush itself, anchoring layer) make photografting a promising platform to control cell deposition and surface localization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1616–1622, 2010     

Modular synthesis of a block copolymer with a cleavable linkage via “click” chemistry

A diblock copolymer poly(ethylene glycol)-block-polystyrene or PEG-b-PS with an olefinic double bond at the PEG and PS junction has been prepared by modular synthesis via “click” chemistry. This involved the synthesis of PS by atom transfer radical polymerization and the nucleophilic substitution of the terminal bromide group with azide to yield azide-terminated PS. PEG with an alkynyl terminal group was prepared from reacting carboxyl-end-functionalized PEG with 4-hydroxybut-2-enyl prop-2′-ynyl succinate, which contained an alkynyl group as well as an olefin group. The PS and PEG polymers were linked via the 1,3-dipolar cycloaddition of the end azide and alkyne groups. The obtained copolymer was characterized by ¹H NMR spectroscopy and size exclusion chromatography (SEC). SEC analysis indicated that the diblock copolymer produced could be readily cleaved by ozonolysis to regenerate the constituent homopolymers.     

One-pot synthesis of linear- and three-arm star-tetrablock quarterpolymers via sequential metal-free ring-opening polymerization using a “catalyst switch” strategy

A “catalyst switch” strategy has been used to sequentially polymerize four different heterocyclic monomers. In the first step, epoxides (1,2-butylene oxide and ethylene oxide) were successively polymerized from a monohydroxy or trihydroxy initiator in the presence of a strong phosphazene base promoter (t-BuP₄). Then, an excess of diphenyl phosphate (DPP) was introduced, followed by addition and polymerization of a cyclic carbonate (trimethylene carbonate) and a cyclic ester (δ-valerolactone or ε-caprolactone). DPP acted as both neutralizer of the phosphazenium alkoxide (polyether chain end) and activator of the cyclic carbonate/ester. Using this method, linear- and star-tetrablock quarterpolymers were prepared in one pot. This work is emphasizing the strength of the previously developed catalyst switch strategy for the facile metal-free synthesis of complex macromolecular architectures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 304–312     

The “bringer” strategy

Random mutagenesis constitutes a keystone in many strategies of directed evolution of biocatalysts and is often done by error-prone polymerase chain reaction (epPCR). Traditionally, the epPCR-generated DNA fragments are then subcloned into an expression vector to obtain a mutant library, which in turn is transformed into a suited host and screened for mutants that display the desired property. However, the vast majority of epPCR-generated fragments generally are lost during the subcloning step, making it the bottleneck in the mutant library construction procedure. Here we report a rapid and convenient strategy based on the epPCR amplification of a ring-closed expression plasmid that contains the gene of interest; after a DpnI digest the product of the epPCR reaction constitutes the mutant library and can be used directly for screening procedures. Primers binding to the beta-lactamase gene were chosen to allow application of the strategy to as broad a range of target plasmids as possible. The functionality of this approach was demonstrated by mutating the alpha-peptide coding region of the lacZ gene.     

Polymer micelles from tadpole-shaped amphiphilic block-graft copolymers prepared by “Grafting-through” ATRP

A series of tadpole-shaped block-graft amphiphilic copolymers, i.e., block copolymers consisting of a cylindrical hydrophilic brush block and a coiled hydrophobic block were synthesized using “grafting-through” atom transfer radical polymerization. A tadpole-shaped block-graft copolymer from polystyrene bromide and a methacryloyl-terminated poly(tert-butyl acrylate) was prepared first. Then, hydrolysis of the poly(tert-butyl acrylate) side chains to polyacrylic acid side chains provided tadpole-shaped block-graft amphiphilic copolymers, which formed pH responsive micelles in water, the latter being confirmed by dynamic light scattering and atomic force microscopy.     

Clopyralid detection by using a molecularly imprinted electrochemical luminescence sensor based on the “gate-controlled” effect

A new strategy for trace analysis was proposed by preparing a molecularly imprinted polymer (MIP) sensor. The template molecules of clopyralid were determined based on “gate-controlled” electrochemiluminescence (ECL) measurement. A dense polymer film was electropolymerized on an electrode surface to fabricate the MIP–ECL sensor. The process of template elution and rebinding acted as a gate to control the flux of probes, which pass through the cavities and react on the electrode surface. ECL measurement was conducted in the luminol–H₂O₂ system. A linear relationship between ECL intensity and clopyralid concentrations in the range of 1?×?10^?9 mol/L to 8?×?10^?7 mol/L exists, and the detection limit was 3.7?×?10^?10 mol/L. The prepared sensor was used to detect clopyralid in vegetables. Recoveries of 97.9 % to 102.9 % were obtained. The sensor showed highly selective recognition, high sensitivity, good stability, and reproducibility for clopyralid detection.     

Description of the state of deformation of ethylene–tetrafluoroethylene alternating copolymer films estimated by using a model proposed in terms of orientation of crystallites within a rod

To study the deformation mechanism of ethylene–tetrafluoroethylene alternating copolymer films caused by elongation, a model relating crystal orientation to the orientation of the rods was proposed. The orientation distribution of crystallites within the rod was given as the correlation with the rod orientation. The distribution functions of a given reciprocal lattice vector of the crystal plane were derived from the two functions of the crystallites and of rods with several parameters representing the orientation of rods and the rotation of crystallites within a rod. By choosing suitable values of the parameters, the calculated functions were in good agreement with the results of X-ray diffraction experiments. From the values of the parameters to give the best fit between calculated and observed results, it turned out that the characteristic orientation of the c-axis is mainly due to the preferential orientation of the rod with respect to a stretching direction and is hardly affected by the rotation of crystallites within the rod. Using the two orientation functions concerning rods and crystallites, Hv light scattering was formulated by introducing an interparticle interference effect of the rods. The calculated results assumed the characteristic profile of the observed patterns as the superposition of broadleaf lobes and a sharp pattern of streaks. Received: 28 April 2000 Accepted: 30 September 2000     

Synthetic polymers adsorbing bisphenol A and its analogues prepared by covalent molecular imprinting using bisphenol A dimethacrylate as a template molecule

Synthetic polymers which can adsorb bisphenol A (BPA) and related compounds were prepared by a covalent molecular imprinting technique. BPA dimethacrylate, used as template molecule, was polymerized with a crosslinker, triethylene glycol dimethacrylate (TEGDMA) or trimethylol propane trimethacrylate (TRIM). After the polymerization treatment with dilute NaOH was used to cleave BPA from the polymers. For high recovery of BPA with low polymer matrix degradation, the hydrolysis conditions were determined to be treatment with 1.0 mol L^–1 NaOH for 48 h. The binding sites generated by the hydrolysis were evaluated by determination of the retentivity of BPA, BPA analogues, and other endocrine disruptors. The polymers strongly adsorbed compounds with two hydroxyl groups at the 4,4-positions. Generally the TEGDMA-based polymers had stronger affinity than the TRIM-based polymers, although the TRIM-based polymer adsorbed steroidal hormones with two hydroxyl groups, for example 17-estradiol and 17-estradiol, more strongly than the TEGDMA-based polymer, meaning that the crosslinkers affected the properties of the binding sites and, depending upon the target molecules, suitable crosslinkers should be chosen in this system.     

Photocatalytic degradation of trichloroethylene using N-doped TiO<Subscript>2</Subscript> prepared by a simple sol–gel process

Visible-light-driven N-doped TiO₂ was prepared by a simple sol–gel process using nitric acid not only as the acid catalyst of the sol–gel reaction but also as the source of nitrogen. The photocatalytic performance of the N-doped TiO₂ was investigated by using FTIR spectroscopy to monitor the degradation of trichloroethylene (TCE) during UV and visible irradiation. The photocatalytic degradation of TCE was well-reproduced several times. The activity of Ti–O–N species was supported experimentally. The N-doped TiO₂ was found to be responsive to visible light and was stable during repeated runs and maintained the nitrogen species and its activity for at least four months.     

Correlation between the cross-linking and degradation activation energy of cotton fabric treated with chitosan kinetic study by ‘model-free’ multiple heating rate methods

Journal of Thermal Analysis and Calorimetry - The different concentrations of chitosan were applied on cotton fabrics using glutaraldehyde as a cross-linking agent. The fabric samples were...     

Simultaneous determination of β-lactamic antibiotics by a new high-performance low-pressure chromatographic system using a multisyringe burette coupled to a monolithic column (MSC)

A technique based on multisyringe chromatography (MSC) was developed to determine three beta-lactamic antibiotics. Amoxicillin (AMOXI), ampicillin (AMPI) and cephalexin (CEPHA) were analyzed using a system with a very simple design and very low-cost equipment consisting of a multisyringe module, three low-pressure solenoid valves, a monolithic Chromolith Flash RP-18e column and a diode array spectrophotometric detector monitoring at 250 nm. Mobile phases containing methanol:acetic acid (0.1 M)-sodium acetate (0.1 M), pH 6.2, were tested for various ratios of methanol:acetic acid-sodium acetate, but a ratio of 10:90 gave optimum results with a flow rate of 2 ml min(-1). Validation parameters were evaluated for amoxicillin. The response to amoxicillin was linear over the range 0.04-0.4 mg/mL, with a correlation coefficient of 0.9996; precisions, evaluated as the repeatability for 0.04, 0.16 and 0.4 mg/mL amoxicillin, were 0.6%, 0.1% and 0.6%, respectively. Recovery from a generic formulation of amoxicillin was evaluated. The method showed selectivity in the presence of excipients commonly used in capsules, and satisfactory specificity was observed for amoxicillin and hydrolytic degradation products. The linearity was also evaluated for cephalexin and ampicillin. The conditions selected for MSC separation were compared with those for a HPLC system, and similar results were obtained in terms of chromatographic parameters but a difference in retention times was observed.