The use of energy dispersive X-ray diffraction (EDXD) for the investigation of the structural and compositional features of old and modern papers

This work reports the first application of the energy dispersive X-ray diffraction (EDXD) for the characterization of old and modern papers. Based on structural and compositional differences observed among various types of paper and building an appropriate database we expect to be able to rapidly identify the provenance of the paper itself using a fast non-destructive technique. This result is quite promising in the field of art conservation and archaeometry.     

Structural analysis of the solid amorphous binuclear complexes of iron(III) and aluminum(III) with chromium(III)-DTPA chelator using energy dispersive X-ray diffraction

This paper is concerned with the structural data obtained for two amorphous binuclear complexes of iron(III) and aluminum(III) with chromium(III)-diethylentriaminepentaacetic acid (chromium(III)-DTPA, CrL(2)(-)) using the energy-dispersive X-ray diffraction technique. Fe(OH)CrL(H(2)O)(6) and Al(OH)CrL(H(2)O)(6) are binuclear complexes, the metals ions being bridged via oxygen atoms. The metal ions are all octahedrally coordinated.     

Structure of iron (II) and cobalt (II) bromide complexes in aqueous solution by X-ray diffraction analysis

Structures of bromo-metal complexes in concentrated aqueous solutions of FeBr₂ and of CoBr₂ were investigated by X-ray diffraction analysis. The complexes possess an octahedral geometry coordinating Br^– along with H₂O ligands. The frequency factors of metal-Br contacts per one atom of metal were 0.325 for the 2.7M (mol-dm^–3) and 0.747 for the 4.5M FeBr₂ solutions, and 0.280 for the 2.8M and 0.595 for the 4.3M CoBr₂ solutions. The frequency factors suggested that the tendency of metal ions to forming monobromo complexes is in the order, Fe>Co>Ni相似文献   

Chemical characterization of particulate matter suspended in the atmosphere by energy dispersive X-ray fluorescence (EDXRF)

Summary This paper presents the first measurement of the elemental composition of the suspended particulate matter in the atmosphere of Londrina city (Paraná State, Brazil). The sampling was accomplished in the summer of 2003 and in the winter of 2002, with a stacker filter holder, collecting simultaneously the fine particulates (PM_2.5) and the coarse particulates (PM₁₀). The concentration of K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br and Pb associated with particulate matter was determined by energy dispersive X-ray fluorescence. The results of the grouping analysis suggested that the elements in the aerosol particles came from two sources: soil re-suspension and industrial or anthropogenic activities.     

Characterization of Japanese color sticks by energy dispersive X-ray fluorescence,X-ray diffraction and Fourier transform infrared analysis

This work comprises the use of energy dispersive X-ray fluorescence (EDXRF), X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) techniques for the study of the composition of twentieth century traditional Japanese color sticks. By using the combination of analytical techniques it was possible to obtain information on inorganic and organic pigments, binders and fillers present in the sticks. The colorant materials identified in the sticks were zinc and titanium white, chrome yellow, yellow and red ochre, vermillion, alizarin, indigo, Prussian and synthetic ultramarine blue. The results also showed that calcite and barite were used as inorganic mineral fillers while Arabic gum was the medium used. EDXRF offered great potential for such investigations since it allowed the identification of the elements present in the sample preserving its integrity. However, this information alone was not enough to clearly identify some of the materials in study and therefore it was necessary to use XRD and FTIR techniques.     

Structural characterization of moganite-type AlPO4 by NMR and powder X-ray diffraction

Structural characterization of a new high-pressure AlPO(4) phase synthesized at 5 GPa and 1500 °C is reported. The phase is monoclinic (P2/a) with a = 8.7437(1) ?, b = 4.8584(1) ?, c = 10.8600(2) ?, β = 90.124(1)° (Z = 6). (31)P MAS NMR and two-dimensional (2D) (27)Al triple-quantum (3Q) MAS NMR revealed that it contains two tetrahedral P sites of 1:2 abundance ratio, and two tetrahedral Al sites with 1:2 ratio. 2D (31)P dipolar-recoupled double-quantum (DQ) MAS NMR and (27)Al → (31)P dipolar-based (through-space) and J coupling-based (through-bond) 3Q-heteronuclear correlation (HETCOR) experiments provided direct information on the linkages of these sites. The crystal structure was solved and refined from synchrotron powder X-ray diffraction data utilizing the information from NMR. The phase is isostructural to moganite, a rare SiO(2) polymorph, and its structure can be derived from the latter via an ordered replacement of tetrahedral Si sites by Al and P. The NMR parameters of the phase were also calculated by first-principles method, which are consistent with those observed. Contrary to the other moganite phases known to date (i.e., SiO(2) and PON), moganite-AlPO(4) has a higher-pressure stability field than the corresponding quartz phase. This is the first moganite-type phase found in the ABX(4) system.     

Soil characterization by energy dispersive X-ray fluorescence: sampling strategy for in situ analysis.

This work describes a sampling strategy that will allow the use of portable EDXRF (energy dispersive X-ray fluorescence) instruments for "in situ" soil analysis. The methodology covers a general approach to planning field investigations for any type of environmental studies and it was applied for a soil characterization study in the zone of Campana, Argentina, by evaluating data coming from an EDXRF spectrometer with a radioisotope excitation source. Simulating non-treated sampled as "in situ" samples and a soil characterization for Campana area was intended. "In situ" EDXRF methodology is a powerful analytical modality with the advantage of providing data immediately, allowing a fast general screening of the soil composition.     

Preparation and characterization of monodisperse superparamagnetic poly(vinyl alcohol) beads by reverse spray suspension crosslinking

A novel protocol for preparing magnetic poly(vinyl alcohol) (PVA) beads by reverse spray suspension crosslinking was reported. The hydrophilic Fe₃O₄ nanoparticles were mixed with PVA, glutaraldehyde, and water to form aqueous phase. Then the aqueous phase was sprayed into vegetable oil by a pressure of nitrogen gas to form water in oil (W/O) suspension. The magnetic PVA beads were obtained in the presence of hydrochloric acid catalyst. It was found that the magnetic PVA beads obtained good properties when the PVA concentration was 10%, and the oil phase temperature was controlled at 40 °C. The mechanical stirring has little impact on the size of magnetic PVA beads in the process of reverse spray suspension crosslinking. The Cibacron Blue (CB) was coupled on the surface of magnetic PVA beads by surface chemical reaction. The morphology, size, and magnetic properties of the magnetic PVA beads were examined by scanning electron microscopy, laser diffraction, and vibrating sample magnetometer, respectively. Compared with the stirring method, it was found that the size of magnetic PVA beads was monodisperse and their saturation magnetization was much higher. Fourier transform infrared and X‐ray photoelectron spectroscopy experimental results proved that CB molecules were covalently immobilized onto the surface of the magnetic PVA beads. Meanwhile, the protein affinity separation experiments demonstrated that the magnetic PVA beads can potentially be used as a carrier for large‐scale protein separation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 203–210, 2008     

Selective photocatalytic reduction of nitrate to nitrogen molecules in an aqueous suspension of metal-loaded titanium(IV) oxide particles

Nitrate was photocatalytically reduced to nitrogen molecules with a high selectivity in a basic aqueous suspension of palladium and copper-loaded titanium(IV) oxide powders in the presence of oxalate anion as a hole scavenger.     

Analysis of uranium ores by energy dispersive X-ray fluorescence

Summary The determination of uranium in ores by energy-dispersive X-ray fluorescence (XFA) is demonstrated for uranium ore samples of known content. For calibration silica gel standards are used. Matrix effects are corrected by measuring the Compton scattering peaks. The radionuclide ¹⁰⁹Cd as well as a X-ray tube in combination with Mo or Sn as secondary targets are suited as X-ray sources. The mean relative deviation of the values found from the given values is 5%

---

Analyse von Uranerzen mit Hilfe der energiedispersiven Röntgenfluorescenz

Zusammenfassung Die Anwendbarkeit der energiedispersen Röntgenfluorescenzanalyse zur Bestimmung des Urangehaltes in Erzen wird am Beispiel von Uranerzproben bekannten Gehaltes demonstriert. Für die Eichung werden Kieselgel-Standards verwendet. Die Matrixeffekte werden mit Hilfe der ComptonStreupeaks korrigiert. Als Röntgenquellen eignen sich sowohl eine ¹⁰⁹Cd-Radionuklidquelle als auch eine Röntgenröhre mit Mo oder Sn als Sekundärtarget. Die mittlere relative Abweichung der Analysenwerte von den gegebenen Werten beträgt 5 %.

     

Quantitative determination of F:O ratios in rare earth oxide fluorides by energy dispersive X-ray analysis

The F:O ratio in homogeneous and inhomogeneous rare earth oxide fluoride systems of compositions RO_1+xF_1–2x with –0.1x0.1 can be determined by energy dispersive X-ray (EDX) analysis with an accuracy of ±0.5% if an appropriate background modelling procedure is applied and if the EDX signals of the light elements are free of overlap from the accompanying rare earth element. The latter condition holds true for R=Tb–Lu and it is shown that the calibration of the method with well-defined samples of YbO_1+xF_1–2x can be transferred with only a moderate loss of accuracy to the determination of oxygen and fluorine in DyOF and ErOF. Increasing signal overlap in case of GdOF, EuOF, SmOF and especially PrOF necessitates the choice of different channels for background modelling, and the accuracy of the method is hence decreasing to ±4% for these systems.     

Structural characterization of nickel oxide nanowires by X-ray absorption near-edge structure spectroscopy

Nickel oxide nanowires modified by poly(vinylpyrrolidone) (PVP) were synthesized via a simple chemical pattern. For the first time NiO nanowires with diameters ranging from 40 to 100 nm with the expected ratio (length vs diameter) ranging from 54 to 90 were grown using a simple solution-phase approach (mild method). These nickel nanowires exhibited unique photoluminescence features and displayed a significant UV luminescence. X-ray absorption near-edge spectroscopy has been used to characterize the local Ni environment and identify the electronic structure. Comparing experimental and theoretical spectra at the Ni and O K edges, we determine the lattice distortion via the analysis of the characteristic preedge features and the multiple-scattering structures detected in the X-ray absorption near-edge structure spectra. The correlation between experimental features and the disordered or distorted local structures is also discussed.     

Determination of tungsten in ores by energy dispersive X-ray fluorescence analysis

The possible determination of tungsten in low grade ores from Northern India, Rajasthan State has been explored by energy dispersive X-ray fluorescence analysis /EDXRF/ technique using radioisotope based excitation of W L X-rays and high resolution Si/Li/ detector system. Finely powdered ore has been diluted with optimal quantity of cellulose and converted into pellets to make it suitable for X-ray analysis after homogenization. The experiments have shown the minimum detectable limit of 33 ppm in diluted matrix. The results are compared with the spectrophotometric stannous chloride-thiocyanate method. EDXRF appears to be encouraging for routine and precise analysis of tungsten in low grade ores.     

Pt oxide and oxygen reduction at Pt(111) studied by surface X-ray diffraction

The influence of the oxygen reduction reaction on the oxidation of Pt(111) is studied by surface X-ray diffraction. The oxygen reduction reaction does not significantly influence the place-exchange process during the initial stages of oxidation and there is no change in the onset potential and kinetics.     

Modification of superparamagnetic iron oxide nanoparticles with poly(diallyldimethylammonium chloride) at air atmosphere

Superparamagnetic iron oxide particles with average size less than 20 nm were prepared by chemical co‐precipitation method in the air atmosphere. After that, polydimethyldiallyl ammonium chloride (PDDA) was used for wrapping iron oxide particles to obtain the core/shell nanocomposites. The parameters influencing properties of iron oxide particles and iron oxide/PDDA nanocomposites were investigated and optimized. The prepared iron oxide and nanocomposites were characterized by X‐ray diffraction (XRD) measurement, transmission electron microscopy (TEM), particle size and Zeta potential analyzer, Fourier transform infrared (FTIR) spectroscopy, and vibrating sample magnetometry (VSM), respectively. It was found that the iron oxide particles are cubic inverse spinel Fe₃O₄ with spherical shape. Superparamagnetic behavior of Fe₃O₄ with 73.114 emu/g is produced with NH₄OH as precipitator, and decreased to 58.583 emu/g for Fe₃O₄/PDDA nanocomposites. The Zeta potential of nanocomposites is positive value. The results showed that Fe₃O₄/PDDA nanocomposites have excellent future using as a carrier for bonding with some negative charged particles. Copyright © 2016 John Wiley & Sons, Ltd.     

The interpretation of X-ray diffraction by aqueous solutions of aluminum(III) nitrate and chromium(III) nitrate

Aqueous solutions of the nitrates of aluminum (0.5 M) and chromium (0.5 M) are investigated with X-ray diffraction at t = 25° C. The experimental intensity is interpreted in terms of an electron product-function which is a sum of various pair contributions. The contribution containing the information about cationic hydration has been evaluated by combining the results of separate experiments. The method is in several aspects quite different from what is usual. Still the results obtained are in general agreement with the data reported elsewhere. That is, sixfold coordination at 1.90 Å and 1.98 Å and a second shell containing about 12 water molecules appearing at 4.10–4.15 Å and 4.20–4.25 Å for Al³⁺ and Cr³⁺ respectively.