Complexation equilibria and spectrophotometric determination of iron(III) with 1-amino-4-hydroxyanthraquinone

The complex equilibria of iron(III) with 1-amino-4-hydroxyanthraquinone (AMHA) were studied spectrophotometrically in 40% (v/v) ethanol and an ionic strength of 0.1M (NaClO(4)). The complexation reactions were demonstrated and characterized using graphical logarithmic analysis of the absorbance-pH graphs. A simple, rapid, selective and sensitive method for the spectrophotometric determination of trace amounts of Fe(III) is developed based on the formation of Fe(AMHA) complex at pH 2.5 (lambda(max) = 640 nm, epsilon approximately = 2.1 x 10(4) L. mol(-1) . cm(-1)) in the presence of a large number of foreign ions. Interferences caused by palladium(II) was masked by the addition of cyanide ions. The method has been applied to the determination of iron in some synthetic samples and polymetallic iron ores.     

Selective spectrophotometric determination of iron(III) with EDTA

A spectrophotometric determination of iron as its iron (III)-EDTA-H₂O₂-NH₃ complex is described; up to 10-fold amounts of metals that form EDTA complexes absorbing at the same wavelength do not interfere because hydrogen peroxide reacts with thciron(IIl)-EDTA complex but does not affect the EDTA complexes of coppcr(II), nickel(II), cobalt(ltl) and chromium(Ilt).     

Complexation of iron(III) by pimelyldihydroxamic acid

Pimelyldihydroxamic acid forms strong complexes with iron(III) in aqueous solution at pH 2–9. Plots of n? and proton liberation against pH show plateaux regions at values of 1.5 and 3.0, respectively, over the pH range 4.0–8.0 supporting a formulation of Fe₂L₃ (logβ = 41.06). The orage-red complex exhibits maximum absorbance at 420 nm, and a well-defined peak at 0.6 V vs. SCE in differential pulse polarography.     

Rapid extraction and direct spectrophotometric determination of iron(III) with thiothenoyltrifluoroacetone

To obtain NH₄F-HF etching agents with constant etching behaviour the concentration of NH₄OH in commercially available 40% NH₄F solutions has to be measured. By application of pH-indicators of the phenol type very small pH-deviations (0.007 pH) from the specified value (0% NH₄OH) can be measured. The specified value is simulated by the stable McIlvaine buffer. By determining the differences in optical absorption 0.01% NH₄OH can be measured in NH₄F solutions. Values found in practice are between 0.1– 0.3%.     

Simultaneous kinetic spectrophotometric determination of vanadium(V) and iron(III)

Vanadium(V) and iron(III) can be determined simultaneously at pH 2 and 25 degrees C by a single experiment using their kinetic effect on the oxidation of indigo carmine by bromate which goes through an induction period and then decreases in absorbance, at lambda(max), 612 nm. The rate of the color-fading of indigo carmine is proportional to the concentration of vanadium and is independent of the concentration of iron. The length of the induction period of the reaction is related to the concentration of iron and is independent of the concentration of vanadium. Concentrations of 0.3-2 (mug ml(-1)) vanadium(V) and 6-12 (mug ml(-1)) iron(III) were determined with mean relative errors of 2.7 and 1.6%, respectively. The interference effects of various cations and anions on determination of mixtures of vanadium and iron is reported. Application of the method to real samples and several mixtures of standard solutions are performed which gave acceptable results.     

Simple solid-phase spectrophotometric method for free iron(III) determination

A simple and rapid solid-phase spectrophotometric procedure to determine free Fe(III) in environmental and biological samples is proposed. In particular, a deferoxamine (DFO) self assembled monolayer on mesoporous silica (DFO SAMMS) is developed and here applied as a sensor for iron(III). The solid product became brownish when put in contact with iron(III) solutions; so an immediate application as colorimetric sensor is considered. In order to optimize the DFO SAMMS synthesis and to obtain the best product for iron(III) sensing, a factorial experimental design is performed selecting the maximum absorption at 425 nm as response. The robustness of the spectrophotometric method is also proved.     

Diformylhydrazine as analytical reagent for spectrophotometric determination of iron(II) and iron(III)

The bidentate ligand diformylhydrazine (OHC-HN-NH-CHO), DFH, combines with iron(II) and iron(III) in alkaline media in the pH range 7.3-9.3 to form an intensely colored red-purple iron(III) complex with an absorption maximum at 470 nm. Beer's law is obeyed for iron concentrations from 0.25 to 13 microg mL(-1). The molar absorptivity was in the range 0.3258x10(4)-0.3351x10(4) L mol(-1) cm(-1) and Sandell's sensitivity was found to be 0.0168 microg cm(-2). The method has been applied to the determination of iron in industrial waste, ground water, and pharmaceutical samples.     

Flow injection spectrophotometric determination of iron(III) using diphenylamine-4-sulfonic acid sodium salt

A highly sensitive and very simple spectrophotometric flow-injection analysis (FIA) method for the determination of iron(III) at low concentration levels is presented. The method is based on the measurement of absorbance intensity of the red complex at 410 nm formed by iron(III) and diphenylamine-4-sulfonic acid sodium salt (DPA-4-SA). It is a simple, highly sensitive, fast, and low cost alternative method using the color developing reagent DPA-4-SA in acetate buffer at pH 5.50 and the flow-rate of 1 mL min⁻¹ with the sample throughput of 60 h⁻¹. The method provided a linear determination range between 5 μg L⁻¹ and 200 μg L⁻¹ with the detection limit (3S) of 1 μg L⁻¹ of iron(III) using the injection volume of 20 μL. FIA variables influencing the system performance were optimized. The amount of iron(III) and total iron in river and seawater samples was successfully determined. Repeatability of the measurements was satisfactory at the relative standard deviation of 3.5 % for 5 determinations of 10 μg L⁻¹ iron(III). The accuracy of the method was evaluated using the standard addition method and checked by the analysis of the certified material Std Zn/Al/Cu 43 XZ3F.     

Extractive spectrophotometric determination of trace amounts of iron(III) with benzyltriethylammonium chloride

The ion-association complex formed between a thiocyanato-iron(III) ion and a benzyltriethylammonium ion is extracted into 1,2-dichloroethane, and its absorbance at 476 nm is used for determination of the iron. Beer's law is obeyed up to about 4 mug/ml iron concentration in the final solution. The molar absorptivity is 2.79 x 10(4) l.mole(-1).cm(-1).     

Reverse flow injection spectrophotometric determination of iron(III) using norfloxacin

A reversed flow injection colorimetric procedure for determining iron(III) at the μg level was proposed. It is based on the reaction between iron(III) with norfloxacin (NRF) in 0.07 mol l⁻¹ ammonium sulfate solution, resulting in an intense yellow complex with a suitable absorption at 435 nm. Optimum conditions for determining iron(III) were investigated by univariate method. The method involved injection of a 150 μl of 0.04% w/v colorimetric reagent solution into a merged streams of sample and/or standard solution containing iron(III) and 0.07 mol l⁻¹ ammonium sulfate in sulfuric acid (pH 3.5) solution which was then passed through a single bead string reactor. Subsequently the absorbance as peak height was monitored at 435 nm. Beer's law obeyed over the range of 0.2–1.4 μg ml⁻¹ iron(III). The method has been applied to the determination of total iron in water samples digested with HNO₃–H₂O₂ (1:9 v/v). Detection limit (3σ) was 0.01 μg ml⁻¹ the sample through of 86 h⁻¹ and the coefficient of variation of 1.77% (n=12) for 1 μg ml⁻¹ Fe(III) were achieved with the recovery of the spiked Fe(III) of 92.6–99.8%.     

Use of acetohydroxamic acid in the direct spectrophotometric determination of iron(III) and iron(II) by flow injection analysis

The direct spectrophotometric determination of iron(III) and iron(II) by flow injection analysis with acetohydroxamic acid and 1,10-phenanthroline as reagents is reported. The working ranges are 0.5–10 and 10–60 mg l^?1, respectively. Results obtained for synthetic mixtures of Fe(III) and Fe(II) and for acid extracts of haematite samples were accurate. Interference studies indicate that the method is highly selective.     

Sequential determination of iron(II) and iron(III) in pharmaceutical by flow-injection analysis with spectrophotometric detection.

A flow injection procedure for the sequential spectrophotometric determination of iron(II) and iron(III) in pharmaceutical products is described. The method is based on the catalytic effect of iron(II) on the oxidation of iodide by bromate at pH = 4.0. The reaction was monitored spectrophotometrically by measuring the absorbance of produced triiodide ion at 352 nm. The activating effect for the catalysis of iron(II) was extremely exhibited in the presence of oxalate ions, while oxalate acted as a masking agent for iron(III). The iron(III) in a sample solution could be determined by passing through a Cd-Hg reductor column introduced in the FIA system to reduce iron(III) to iron(II), which allows total iron determination. Under the optimum conditions, iron(II) and iron(III) could be determined over the range of 0.05 - 5.0 and 0.10 - 5.0 microg ml(-1), respectively with a sampling rate of 17 +/- 5 h(-1). The experimental limits of detection were 0.03 and 0.04 microg ml(-1) for iron(II) and iron(III), respectively. The proposed method was successfully applied to the speciation of iron in pharmaceutical products.     

Sequential flow-injection spectrophotometric determination of iron(II) and iron(III) by copper(II)-catalyzed reaction with Tiron

A flow injection method for the sequential determination of iron(II) and iron(III) was developed. It is based on the differential reaction kinetics of iron(II) and iron(III) with Tiron in a double-injection FI system. The proposed method employs the accelerating action of copper(II) for the oxidation of iron(II) in the presence of Tiron. A linear calibration graph is obtained for iron (II) and iron(III) in the concentration range 1.8 × 10^–5– 1.8 × 10^–4 mol/L; the throughput of samples is 30 injections/h. Received: 22 October 1996 / Revised: 4 December 1996 / Accepted: 10 December 1996     

Sequential flow-injection spectrophotometric determination of iron(II) and iron(III) by copper(II)-catalyzed reaction with Tiron

A flow injection method for the sequential determination of iron(II) and iron(III) was developed. It is based on the differential reaction kinetics of iron(II) and iron(III) with Tiron in a double-injection FI system. The proposed method employs the accelerating action of copper(II) for the oxidation of iron(II) in the presence of Tiron. A linear calibration graph is obtained for iron (II) and iron(III) in the concentration range 1.8 × 10^–5– 1.8 × 10^–4 mol/L; the throughput of samples is 30 injections/h.