Quantum-Chemical Study of Electronic Structure and Reactivity of Diphospha-1,3-Butadienes

Abstract

Quantum-chemical calculations of the electronic structure of 1,3-, 1,4- and 2,3-diphospha-1,3-butadienes (DPB) and their derivatives with different substituents were performed. The MNDO method was used to describe the electronic structure of phosphaalkenes. The frontier orbitals of all unsubstituted DPB are of π-type. The highest occupied molecular orbital (HOMO) is delocalized through both double phosphorus-carbon bonds; the next occupied MO is a combination of two phosphorus lone pairs (n-MO). The HOMO of 2,3-DPB differs markedly from those of 1,3- and 1,4-isomers: the contributions of phosphorus and carbon p-orbitals are nearly equal, and the energy gap between HOMO and n-MO is very small (0.008 eV). The introduction of the electron-withdrawing substituents results in the reverse order of these MO's. In contrast with 1,3- and 1,4-isomers, the double bonds of 2,3-DPB are almost non-polar. Effect of substituents upon the electron density distribution are considered. The results indicate that orbitally controlled 1,4-additions should be characteristic for the derivatives of 1,3- and 1,4-DPB, similar to 1,3-butadiene. In case of 2,3-DPB, tendency to 1,4-addition should be lower; for its derivatives the reaction type depends greatly upon the electronic effects of substituents. In particular, reactions involving phosphorus lone pairs should be typical for the derivatives of 2,3-DPB with electron-withdrawing substituents.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Facile syntheses of allylic allenethiosulfinates and -sulfonates, and of beta-iodo alpha,beta-unsaturated gamma-sultines

The regiospecificity of the 1,4-addition of the recently reported novel alkoxy chlorodisulfides to 2-methyl-1,3-butadiene has been established. Allyl allenethiosulfinates formed by spontaneous [2,3]-sigmatropic rearrangement of the addition products were oxidized at 4 degrees C to the corresponding thiosulfonates. Periodate oxidation at room temperature, preferably in the presence of I2, resulted in oxidative cleavage and cyclization to beta-iodo alpha,beta-unsaturated gamma-sultines. Such sultines, with varying degrees of gamma-alkyl substitution, were also conveniently prepared by reaction of iodine with alkyl allenesulfinates.     

Reaction of furfurylidene acetone with Grignard reagents

The interaction of furfurylidene acetone with methylmagnesium iodide and ethylmagnesium halides has been studied. In the first case 2-methyl-4-(2-furyl)-3-buten-2-ol is formed as the product of 1,2-addition (yield 73 %). In the second case 4-(2-furyl)-2-hexanone (42 %) is the result of 1,4-addition, whereas 3-methyl-5-(2-furyl)-3-heptanol (45 %) is formed by consecutive 1,2- and 1,4-addition. In all cases the products of 1,3-addition were found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 921–923, May, 1993.     

Development of catalytic asymmetric 1,4-addition and [3 + 2] cycloaddition reactions using chiral calcium complexes

Catalytic asymmetric 1,4-addition and [3 + 2] cycloaddition reactions using chiral calcium species prepared from calcium isopropoxide and chiral bisoxazoline ligands have been developed. Glycine Schiff bases reacted with acrylic esters to afford 1,4-addition products, glutamic acid derivatives, in high yields with high enantioselectivities. During the investigation of the 1,4-addition reactions, we unexpectedly found that a [3 + 2] cycloaddition occurred in the reactions with crotonate derivatives, affording substituted pyrrolidine derivatives in high yields with high enantioselectivities. On the basis of this finding, we investigated asymmetric [3 + 2] cycloadditions, and it was revealed that several kinds of optically active substituted pyrrolidine derivatives containing contiguous stereogenic tertiary and quaternary carbon centers were obtained with high diastereo- and enantioselectivities. In addition, optically active pyrrolidine cores of hepatitis C virus RNA-dependent polymerase inhibitors and potential effective antiviral agents have been synthesized using this [3 + 2] cycloaddition reaction. NMR spectroscopic analysis and observation of nonamplification of enantioselectivity in nonlinear effect experiments suggested that a monomeric calcium species with an anionic ligand was formed as an active catalyst. A stepwise mechanism of the [3 + 2] cycloaddition, consisting of 1,4-addition and successive intramolecular Mannich-type reaction was suggested. Furthermore, modification of the Schiff base structure resulted in a modification of the reaction course from a [3 + 2] cycloaddition to a 1,4-addition, affording 3-substituted glutamic acid derivatives with high diasterero- and enantioselectivities.     

Halofluorination of 1,2-difluoro-1,2-di(p-tolyl)ethene, 1,2,3,4-tetrafluoro-1,4-di(p-tolyl) butadiene and its nonfluorinated parent compounds

The reactions of (E)-1,2-difluoro-1,2-di (p-tolyl) ethene (1) with N-bromo- or N-chlorosuccinimide gave mainly the expected halofluorination products 1-bromo-1,2-di(p-tolyl)-1,2,2-trifluoroethane (2) or 1-chloro-1,2-di(p-tolyl)-1,2,2-trifluoroethane (4), respectively. As a side reaction halogenation of the double bond has been obtained. With (E,E)-1,4-di(p-tolyl)-1,2,3,4-tetrafluorobuta-1,3-diene (6) under the same conditions the products of 1,2- and 1,4-addition or its consecutive hydrolysis products were isolated. (E)-Stilbene (19) on bromofluorination gave solely erythro-1-bromo-2-fluoro-1,2-diphenylethane (20), while with 1,4-diphenylbuta-1,3-diene (17) mainly higher molecular weight products were formed.     

Prins-Reaktionen mit Arylaldehyden, 2. Mitt. Diene

By 1,4-addition of arylaldehydes to 2,3-dimethyl-1,3-butadiene in the presence of sulfuric acid 2-aryl-4,5-dimethyl-3,6-dihydro-2H-pyrans are obtained. From 1,3-butadiene and isoprene beside the corresponding 3,6-dihydro-2H-pyrans by reaction with two more molecules aldehydetrans-2,4,7-triphenyl-4a,7,8,8a-tetrahydro-4H,5H-pyrano[4,3-d-1,3-dioxines are formed. With 1,3-cyclohexadiene, however, 1,2-addition of benzaldehyde is observed to givecis-r-2,c-4-diphenyl-4a,5,6,8a-tetrahydro-1,3-benzodioxane.     

Unexpected 1,3‐Dipolar Cycloaddition Reaction of Thiazolo[3,2‐a]pyrimidine Derivatives and Nitrilimine

The 1,3‐dipolar cycloaddition reactions of nitrilimine with thiazolo[3,2‐a]pyrimidine derivatives was investigated. Bis‐cycloadducts were obtained through a domino 1,3‐dipolar cycloaddition/ring‐opening/ring‐opening/1,3‐dipolar cycloaddition processes. The structures of the products were characterized thoroughly by NMR, IR, MS, elemental analysis together with X‐ray crystallographic analysis.     

Cycloaddition of Alkenes and Alkynes to the P-centered Singlet Biradical [P(μ-NTer)]2

The reaction of biradical [P(μ-NTer)]₂ ( 1 , Ter = 2,6-bis(2,4,6-trimethylphenyl)phenyl) towards different alkenes (R = 2,3-dimethyl–butadiene, 2,5-dimethyl-2,4-hexadiene, 1,7-octadiene, 1,4-cyclohexadiene) and alkynes (R = 1,4-diphenyl-1,3-butadiyne) was studied experimentally. Although these olefins can react in different ways, only [2+2] cycloaddition products ( 1R ) were observed. The reaction with 2,3-dimethylbutadiene also led to the [2+2] product ( 1dmb ). Thermal treatment of 1dmb above 140 °C resulted in the recovery of biradical 1 upon homolytic bond cleavage of the two P–C bonds and the release of 2,3-dimethylbutadiene. In contrast to this reaction, all other [2+2] additions products ( 1R , R = 1,7-octadiene, 1,4-cyclohexadiene, 1,4-diphenyl-1,3-butadiyne) began to decompose at temperatures between 200 °C and 300 °C. Only unidentified products were obtained but no temperature-controlled equilibrium reactions were observed. Computations were carried out to shed light into the formal [2+2] as well as the possible [4+2] addition reaction.     

Construction of functionalized 2,3-dihydro-1,4-benzoxazines via [5 + 1] annulations of 2-halo-1,3-dicarbonyl compounds with imines

A series of functionalized 2,3-dihydro-1,4-benzoxazines were obtained in moderate to excellent yields via domino [5 + 1] annulations of 2-halo-1,3-dicarbonyl compounds 2 with imines 1 under mild conditions and the application of this method in the synthesis of bioactive analogues, such as functionalized tetracyclic-1,4-benzoxazines which contain two new heterocyclic rings and one quaternary carbon center has also been developed.     

Oxidation of poly(1,3‐cyclohexadiene): Influence of the polymer chain structure

The influence of the microstructure on the oxidation of poly(1,3‐cyclohexadiene) (PCHD) homopolymer, obtained by anionic polymerization with alkyllithium/amine systems, was investigated for the first time. PCHD has a structure consisting of a main chain formed by 1,2‐addition (the 1,2‐CHD unit) and 1,4‐addition (the 1,4‐CHD unit). The molar ratio of 1,2‐CHD/1,4‐CHD units in the polymer chain strongly influenced the extent of oxidation of PCHD. A polymer chain with a high content of 1,4‐CHD units was easily oxidized by air and 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ). In contrast, the progress of oxidation was prevented in the case of PCHD containing 52% of 1,2‐CHD units. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 837–845, 2006     

PAH formation under single collision conditions: reaction of phenyl radical and 1,3-butadiene to form 1,4-dihydronaphthalene

The crossed beam reactions of the phenyl radical (C(6)H(5), X(2)A(1)) with 1,3-butadiene (C(4)H(6), X(1)A(g)) and D6-1,3-butadiene (C(4)D(6), X(1)A(g)) as well as of the D5-phenyl radical (C(6)D(5), X(2)A(1)) with 2,3-D2-1,3-butadiene and 1,1,4,4-D4-1,3-butadiene were carried out under single collision conditions at collision energies of about 55 kJ mol(-1). Experimentally, the bicyclic 1,4-dihydronaphthalene molecule was identified as a major product of this reaction (58 ± 15%) with the 1-phenyl-1,3-butadiene contributing 34 ± 10%. The reaction is initiated by a barrierless addition of the phenyl radical to the terminal carbon atom of the 1,3-butadiene (C1/C4) to form a bound intermediate; the latter underwent hydrogen elimination from the terminal CH(2) group of the 1,3-butadiene molecule leading to 1-phenyl-trans-1,3-butadiene through a submerged barrier. The dominant product, 1,4-dihydronaphthalene, is formed via an isomerization of the adduct by ring closure and emission of the hydrogen atom from the phenyl moiety at the bridging carbon atom through a tight exit transition state located about 31 kJ mol(-1) above the separated products. The hydrogen atom was found to leave the decomposing complex almost parallel to the total angular momentum vector and perpendicularly to the rotation plane of the decomposing intermediate. The defacto barrierless formation of the 1,4-dihydronaphthalene molecule involving a single collision between a phenyl radical and 1,3-butadiene represents an important step in the formation of polycyclic aromatic hydrocarbons (PAHs) and their partially hydrogenated counterparts in combustion and interstellar chemistry.     

Formation of stable enols from 1,4-dilithio-1,3-dienes and acid chlorides by a de-aromatization/Michael addition/re-aromatization domino process

Stable enols were synthesized from the reaction of (1Z,3Z)-1,4-dilithio-1,3-dienes with acid chlorides and structurally characterized by single-crystal X-ray analysis. These stable enols were formed by a novel de-aromatization/Michael addition/re-aromatization domino process.     

Facile synthesis of 3-aryl 2,3-dihydrobenzofurans via novel domino 1,6-addition/O-alkylation reactions of para-quinone methides

A facile K₂CO₃-promoted novel domino 1,6-addition/O-alkylation reaction of ortho-hydroxyphenylsubstituted p-QMs and diethyl bromomalonate is described. A variety of new 3-aryl 2,3-dihydrobenzofurans were obtained in excellent yields (up to 99%) under simple and mild conditions. The structure of the new compound 3f was determined by single crystal X-ray analysis.     

1,4-Cycloaddition reactions. II. Preparation of p-dioxino[2,3-g]furo[3,2-c] quinolines,p-dioxino[2,3-f] furo[3,2-c] quinolines,and [1,3] dioxolo[4,5-g] furo[3,2-c] quinolines from 2,3-dihydro-5-methylfuran and schiff bases

The boron trifluoride catalyzed 1,4-addition of 2,3-dihydro-5-methylfuran to N-(p-methoxy-benzylidene)-1,4-benzodioxan-6-amine (II) gave 2 pairs of epimers, 2,3,3a,4,5,8,9,11b-octahydro-4-(p-methoxyphenyl)-11b-methyl-p-dioxino[2,3-g]furo[3,2-c]quinoline (IIIa and b) and 2,3,7,8,8a,9.10,1la-octahydro-8-(p-methoxyphenyl)-11a-methyl-p-dioxino[2,3-f]furo[3,2-c]quinoline (IVa and b). When N-(p-methoxybenzylidene)-3,4-methylenedioxyaniline (V) was condensed with 2,3-dihydro-5-methylfuran in an analogous manner, a mixture of 2 epimers of 2,3,3a,4,5,10b-hexahydro-4-(p-methoxyphenyl)-10b-methyl[1,3]dioxolo[4,5-g]furo[3,2-c]quinoline (VIa and b) was isolated. Treatment of this mixture with sulfur afforded 6-(p-methoxyphenyl)-8-methyl-1,3-dioxolo[4,5-g]quinoline-7-ethanol (VIII). Structural assignments for all of the products were made from NMR spectra. None of the compounds possessed appreciable biological activity.     

Asymmetric synthesis of 2-aryl-2,3-dihydro-4-quinolones by rhodium-catalyzed 1,4-addition of arylzinc reagents in the presence of chlorotrimethylsilane

[reaction: see text] The first catalytic asymmetric synthesis of 2-aryl-2,3-dihydro-4-quinolones has been developed by way of a rhodium-catalyzed 1,4-addition of arylzinc reagents to 4-quinolones. These 1,4-adducts can be obtained with high enantioselectivity by the use of (R)-binap as a ligand, and high yields are realized by conducting the reactions in the presence of chlorotrimethylsilane.     

Direct catalytic asymmetric Michael reaction of hydroxyketones: asymmetric Zn catalysis with a Et2Zn/linked-BINOL complex

Full details of our direct Michael addition of unmodified ketones using new asymmetric zinc catalysis are described. Et(2)Zn/(S,S)-linked-BINOL complexes were successfully applied to direct 1,4-addition reactions of hydroxyketones. The first generation Et(2)Zn/(S,S)-linked-BINOL 1 = 2/1 system was effective for 1,4-addition of 2-hydroxy-2'-methoxyacetophenone (3). Using 1 mol % of (S,S)-linked-BINOL 1 and 2 mol % of Et(2)Zn, we found that a 1,4-addition reaction of beta-unsubstituted enone proceeded smoothly at 4 degrees C to afford products in high yield (up to 90%) and enantiomeric excess (up to 95%). In the case of beta-substituted enones, however, the first generation Et(2)Zn/(S,S)-linked-BINOL 1 = 2/1 system was not at all effective. The second generation Et(2)Zn/(S,S)-linked-BINOL 1 = 4/1 with MS 3A system was developed and was effective for various beta-substituted enones to afford products in good dr, yield (up to 99%), and high enantiomeric excess (up to 99% ee). With the Et(2)Zn/1 = 4/1 systems, catalyst loading for beta-unsubstituted enone was reduced to as little as 0.01 mol % (substrate/chiral ligand = 10 000). The new system was also effective for 1,4-addition reactions of 2-hydroxy-2'-methoxypropiophenone (9) to afford chiral tert-alcohol in high enantiomeric excess (up to 96% ee). Mechanistic investigations as well as transformations of the Michael adducts into synthetically versatile intermediates are also described.     

Rhodium-Catalyzed Asymmetric Conjugate Additions of Boronic Acids to enones using DIPHONANE: a novel chiral bisphosphine ligand

[reaction: see text] The synthesis of a novel enantiopure C2-symmetric bisphosphine, DIPHONANE, was accomplished starting from 2,5-norbornadione, utilizing (R,R)- and/or (S,S)-(2,3-O-di[(phenylamino)carbonyl]tartaric acid for the resolution of an intermediate phosphineoxide. The application of this ligand in the rhodium-catalyzed asymmetric conjugate addition of boronic acids to cyclic enones provides the 1,4-addition products in good yields (69-98%) and high ee's (78-95% ee). A byproduct arising from a consecutive 1,4-addition and 1,2-addition was also observed.     

Photoinduced Molecular Transformations. Part 142. One-step syntheses of 1H-benz[f]indole-4,9-diones and 1H-indole-4,7-diones by a new regioselective photoaddition of 2-amino-1,4-naphthoquinones and 2-amino-1,4-benzoquinones with alkenes

The 2,3-dihydro-1H-benz[f]indole-4,9-diones 3a–d , h were formed in a one-step reaction in 13–82% yield by an unprecedented [3 + 2] regioselective photoaddition of 2-amino-1,4-naphthoquinone ( 1 ) with various electronrich alkenes 2 (Scheme 1, Table). The [3 + 2] photoadducts derived from 1 with vinyl ethers and vinyl acetate gave 1H-benz[f]indole-4,9-diones 4e , f , i , in 33–72% yield, by spontaneous loss of the corresponding alcohol or AcOH from the resulting adducts; 4i has a kinamycin skeleton. The [3 + 2] photoaddition also took place on irradiation of the differently substituted amino-1,4-benzoquinones 6 , 7 , and 12 and excess alkenes 2 in benzene, giving 1H-indole-4,7-dione derivatives 13 and 14 (Scheme 3), 15a and 16 (Scheme 4), and 18 (Scheme 4), respectively. The initial products in these photoadditions were proved to be hydroquinones, the air oxidation of which yielded the heterocyclic quinones; 2,3-dihydro-2-methoxy-2-methyl-5-phenyl-1H-indole-1,4,7-triyl triacetate ( 19 ) was isolated after treatment of the crude photoaddition mixture obtained from 2-amino-5-phenyl-1,4-benzoquinone ( 7 ) and 2-methoxyprop-1-ene ( 2f ) with Ac₂O and pyridine under N₂. A pathway leading to the annelated hydroquinones involving ionic intermediates arising from an electron transfer in these photoadditions is proposed (Scheme 5).     

N,N-dihalophosphoramides-XV: The addition of diethyl N,N-dichlorophosphoroamidate (DCPA) to conjugated 1,3-dienes

The addition of DCPA to several conjugated 1,3-dienes has been studied. The reaction was found to proceed in dichloromethane and was spontaneously or photolytically initiated depending on the structure of the dienes. N-chloro adducts, formed upon addition, could be reduced “in situ” with sodium sulphite solution to give the corresponding diethyl N-(chloroalkenyl)posphoroamidates. Addition of DCPA to terminal double bond 1,3-dienes (butadiene, isoprene and 2,3-dimethyl-1,3-butadiene) leads regiospecifically to (E)-1,4-adducts. Similarly, 1,4-addition is also observed for 1,3-cyclohexadiene. Reaction of DCPA with nonterminal double bond 1,3-dienes (trans-piperylene, 4-methyl-1,3-pentadiene, 2,5-dimethyl-2,4-hexadiene and 1,4-diphenyl-1,3-butadiene) usually affords a mixture of adducts. Spectral data and chemical transformations pertinent to the proof of structure of DCPA addition products are presented. A possible mechanism for the addition is discussed.