Synthesis and reactivity of substituted cyclopentadienyl rhodium(I) and (III) complexes

New cyclopentadienyl derivatives of rhodium COD complexes [Cp*=C₅H₄COOCH₂CHCH₂ (1); C₅H₄CH₂CH₂CHCH₂ (2); C₅H(i-C₃H₇)₄ (3)] and carbonyl complex [Cp*=C₅H(i-C₃H₇)₄ (4)] were synthesized from [RhCl(COD)]₂ and [RhCl(CO)₂]₂. 1, 2 and 3 oxidized by iodine gave iodine bridged dimers 5, 6 and 7, respectively. Triphenyl phosphine, carbon monoxide and carbon disulfide molecules broke down the iodine bridged structure easily and produced monomer products Cp*RhI₂L [Cp*=C₅H₄COOCH₂CHCH₂, L=CS₂ (8); L=PPh₃ (9). Cp*=C₅H(i-C₃H₇)₄, L=CO (10)]. All of these new compounds were characterized by elemental analysis, ¹H NMR, IR, UV-Vis and mass spectroscopy. The crystal structure of 1 was solved in the triclinic space group with one molecule in the unit cell, the dimensions of which are a=7.082(9) Å, b=8.392(3) Å, c=13.889(5) Å, α=101.19(3)°, β=99.06(6)°, γ=105.11(5)°, and V=763(1) ų. The crystal structure of 3 was solved in the orthorhombic space group Pn21a with four molecules in the unit cell, the dimensions of which are a=9.748(3) Å, b=16.054(5) Å, and V=2319(1) ų. Least squares refinement leads to values for the conventional R₁ of 0.0251 for 1 and 0.0558 for 3, respectively. Compared to that in 1, a shorter metal-ligand bond length in 3 was observed and this is attributed to the rich electron density on Rh(I) metal center piled up by the C₅H(i-C₃H₇)₄ ligand.     

Theoretical study of the reactivity of Rh(I) and Rh(III) Bis(isonitrile) complexes in cycloaddition reactions with nitrones

The mechanism of 1,3-dipolar cycloaddition of nitrone (CH₂=N(Me)O) to methylisonitrile coordinated to Rh(I) and Rh(III) in the [RhCl(PH₃)(CNMe)₂] and [RhCl₃(PH₃)(CNMe)₂] complexes has been studied by quantum-chemical methods. The molecular and electronic structures of the cycloaddition products, the nature of transition states, the mechanism of reactions, their kinetic and thermodynamic parameters, and the solvent effect have been described. The reactions occur via the concerted strongly asynchronous mechanism involving the formation of a five-membered cyclic transition state. The use of rhodium complexes as reagents leads to a noticeable decrease in the activation barriers of the processes under consideration and an increase in the magnitudes of energy effects of the reactions. It has been demonstrated that the Rh(III) complexes are better activators of the cycloaddition of nitrone to isonitrile than the Rh(I) complex. The calculations predict that in the case of the Rh(I) complexes, only one isonitrile ligand can be involved in cycloaddition of nitrone, whereas the use of the Rh(III) complexes enables the participation of both ligands. The solvation effects inhibit the reactions.     

New Rh(I) and Rh(III) bisimidazol-2-ylidene complexes: synthesis,reactivity, and molecular structures

New chelate bis-heterocyclic-carbene complexes of Rh(I) and Rh(III) have been obtained and fully characterized. The molecular structures of the new species have been determined. The synthesis of the compounds starts from the bisimidazolium precursors, which are deprotonated with NEt(3) under mild reaction conditions, leading to coordination to the Rh complex. The Rh(III) compounds are generated from Rh(I) and [Rh(II)](2) species, although there is no apparent oxidizing agent in the reaction media.     

Interaction of a bulky N-heterocyclic carbene ligand with Rh(I) and Ir(I). Double C-H activation and isolation of bare 14-electron Rh(III) and Ir(III) complexes

Reactivity and structural studies of unusual rhodium and iridium systems bearing two N-heterocyclic carbene (NHC) ligands are presented. These systems are capable of intramolecular C-H bond activation and lead to coordinatively unsaturated 16-electron complexes. The resulting complexes can be further unsaturated by simple halide abstraction, leading to 14-electron species bearing an all-carbon environment. Saturation of the vacant sites in the 16- and 14-electron complexes with carbon monoxide permits a structural comparison. DFT calculations show that these electrophilic metal centers are stabilized by pi-donation of the NHC ligands.     

Synthesis and reactivity of formamidinato rhodium(I) complexes

The syntheses of [Rh(diol)(formamidine)]₂ complexes (diol  cycloocta-1,5-diene (1); diol  norbornadiene (2); formamidine  N,N′-di-p-tolylformamidine) are reported. These complexes are dimeric and contain the bridging formamidino ligand. They react with CO, dppe and PPh₃ with displacement of the diene ligand to yield the known [Rh(CO)₂(formamidine)]₂, [Rh(dppe)₂]⁺ and [Rh(PPh₃)₂(formamidine)], respectively; the last complex, in which the formamidine acts as a chelating ligand, was isolated only as the O₂ adduct. With HCl or HBF₄ aqueous 1 and 2 do not form hydrides but instead the formamidino cation [p-tolyl-NHCHNHtolyl-p]⁺ and the complexes [Rh(diol)X]₂ (X  Cl, F); a possible scheme for the reaction with HCl is proposed. The [Rh(C₈H₁₂)(formamidine)]₂ complex reacts with heterocumulenes as CS₂, SO₂, PhNCS and PhNCO with diene displacement; the only product isolated was [Rh(CS₂)₂(formamidine], to which a polymeric structure is assigned.     

Rh(II) and Rh(I) two-legged piano-stool complexes: structure,reactivity, and electronic properties

The ligand 1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene, 3, was used to synthesize a mononuclear Rh(II) complex [(eta(1):eta(6):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh][PF(6)](2), 6+, in a two-legged piano-stool geometry. The structural and electronic properties of this novel complex including a single-crystal EPR analysis are reported. The complex can be cleanly interconverted with its Rh(I) form, allowing for a comparison of the structural properties and reactivity of both oxidation states. The Rh(I) form 6 reacts with CO, tert-butyl isocyanide, and acetonitrile to form a series of 15-membered mononuclear cyclophanes [(eta(1):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh(CO)(3)][PF(6)] (8), [(eta(1):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh(CNC(CH(3))(3))(2)][PF(6)] (10), and [(eta(1):eta(1)-1,4-bis[4-(diphenylphosphino)butyl]-2,3,5,6-tetramethylbenzene)Rh(CO)(CH(3)CN)][PF(6)] (11). The Rh(II) complex 6+ reacts with the same small molecules, but over shorter periods of time, to form the same Rh(I) products. In addition, a model two-legged piano-stool complex [(eta(1):eta(6):eta(1)-1,4-bis[3-(diphenylphosphino)propoxy]-2,3,5,6-tetramethylbenzene)Rh][B(C(6)F(5))(4)], 5, has been synthesized and characterized for comparison purposes. The solid-state structures of complexes 5, 6, 6+, and 11 are reported. Structure data for 5: triclinic; P(-)1; a = 10.1587(7) A; b = 11.5228(8) A; c = 17.2381(12) A; alpha = 96.4379(13) degrees; beta = 91.1870(12) degrees; gamma = 106.1470(13) degrees; Z = 2. 6: triclinic; P(-)1; a = 11.1934(5) A; b = 12.4807(6) A; c = 16.1771(7) A; alpha = 81.935(7) degrees; beta = 89.943(1) degrees; gamma = 78.292(1) degrees; Z = 2. 6+: monoclinic; P2(1)/n; a = 11.9371(18) A; b = 32.401(5) A; c = 12.782(2) A; beta = 102.890(3) degrees; Z = 4. 11: triclinic; P(-)1; a = 13.5476(7) A; b = 13.8306(7) A; c = 14.9948(8) A; alpha = 74.551(1) degrees; beta = 73.895(1) degrees; gamma = 66.046(1) degrees; Z = 2.     

Solvent-dependent interconversions between Rh(I), Rh(II), and Rh(III) complexes of an aryl-monophosphine ligand

Reaction of the aryl-monophosphine ligand alpha(2)-(diisopropylphosphino)isodurene (1) with the Rh(I) precursor [Rh(coe)(2)(acetone)(2)]BF(4) (coe=cyclooctene) in different solvents yielded complexes of all three common oxidation states of rhodium, depending on the solvent used. When the reaction was carried out in methanol a cyclometalated, solvent-stabilized Rh(III) alkyl-hydride complex (2) was obtained. However, when the reaction was carried out in acetone or dichloromethane a dinuclear eta(6)-arene Rh(II) complex (5) was obtained in the absence of added redox reagents. Moreover, when acetonitrile was added to a solution of either the Rh(II) or Rh(III) complexes, a new solvent-stabilized, noncyclometalated Rh(I) complex (6) was obtained. In this report we describe the different complexes, which were fully characterized, and probe the processes behind the remarkable solvent effect observed.     

Synthesis, structure and reactivity of homobimetallic Rh(I) and Ir(I) complexes of s- and as-indacene-diide

The Rh(COD) and Ir(COD) homobimetallic complexes of s-indacene-diide, 2,6-dimethyl-s-indacene-diide, as-indacene-diide, and 2,7-dimethyl-as-indacene-diide have been synthesized from the di-lithium salts of the dianions and metal dimers [M(μ-Cl)L₂]₂ (M = Rh, Ir; L₂ = COD, NBD, (ethylene)₂, (CO)₂ as mixtures of syn and anti isomers. The syn/anti ratio depends on the nature of the ancillary ligands at the metal and on the s or as geometry of the bridging ligand. In the reaction of the 2,7-dimethyl-as-indacene-diide-[M(COD)]₂ species with CO, the higher reactivity of the syn isomers has been justified on the basis of a greater instability of the ground state due to steric interactions between the COD groups. Bis-η¹ metal-bonded intermediates have been identified in the carbonylation of iridium derivatives; on the other hand, the formation of the bis-η⁵ mixed complexes syn and anti-{2,7-dimethyl-as-indacene-diide-[Rh(COD)][Rh(CO)₂]} and their reactivity strongly support the existence of metal---metal interaction in the rhodium derivatives.     

NiN(2)S(2) complexes as metallodithiolate ligands to Rh(I), Rh(II) and Rh(III)

Three molecular structures are reported which utilize the NiN(2)S(2) ligands -, (bis(mercaptoethyl)diazacyclooctane)nickel and -', bis(mercaptoethyl)diazacycloheptane)nickel, as metallodithiolate ligands to rhodium in oxidation states i, ii and iii. For the Rh(I) complex, the NiN(2)S(2) unit behaves as a bidentate ligand to a square planar Rh(I)(CO)(PPh(3))(+) moiety with a hinge or dihedral angle (defined as the intersection of NiN(2)S(2) and S(2)Rh(C)(P) planes) of 115 degrees . Supported by -' ligands, the Rh(II) oxidation state occurs in a dirhodium C(4) paddlewheel complex wherein four NiN(2)S(2) units serve as bidentate bridging ligands to two singly-bonded Rh(II) ions at 2.893(8) A apart. A compilation of the remarkable range of M-M distances in paddlewheel complexes which use NiN(2)S(2) complexes as paddles is presented. The Rh(III) state is found as a tetrametallic [Rh(-')(3)](3+) cluster, roughly shaped like a boat propeller and structurally similar to tris(bipyridine)metal complexes.     

On the P-coordinating limit of NHC-phosphenium cations toward Rh(I) centers

Two types of imidazoliophosphane with additional electron-withdrawing substituents, such as alkoxy or imidazolio groups, are experimentally described and theoretically studied. Diethyl N,N'-2,4,6-methyl(phenyl)imidazoliophosphonite is shown to retain a P-coordinating ability toward a {RhCl(cod)} (cod = cycloocta-1,5-diene) center, thus competing with the cleavage of the labile C-P bond. Derivatives of N,N'-phenylene-bridged diimidazolylphenylphosphane were isolated in good yield. Whereas the dicationic phosphane proved to be inert in the presence of [{RhCl(cod)}(2)], the monocationic counterpart was shown to retain the P-coordinating ability toward a {RhCl(cod)} center, thus competing with the N-coordinating ability of the nonmethylated imidazolyl substituent. The ethyl phosphinite version of the dication, thus possessing an extremely electron-poor P(III) center, was also characterized. According to the difference between the calculated homolytic and heterolytic dissociation energies, the N(2)C???P bond of imidazoliophosphanes with aryl, amino, or alkoxy substituents on the P atom is shown to be of dative nature. The P-coordinating properties of imidazoliophosphanes with various combinations of phenyl or ethoxy substituents on the P atom and those of six diimidazolophosphane derivatives with zero, one, or two methylium substituents on the N atom, were analyzed by comparison of the corresponding HOMOs and LUMOs and by calculation of the IR C=O stretching frequencies of their [RhCl(CO)(2)] complexes. Comparison of the ν(CO) values allows the family of the electron-poor Im(+) PRR' (Im = imidazolyl) potential ligands to be ranked in the following order versus (R,R'): P(OEt)(3)<(Ph,Ph)<(Ph,OEt)<(OEt,OEt)相似文献   

Synthesis and characterization of Ru(III), Rh(III), Pt(IV) and Ir(III) thiosemicarbazone complexes

Ru(III), Rh(III), Pt(IV) and Ir(III) complexes of 2-furfural thiosemicarbazone as ligand have been synthesised. These complexes have the composition [M(ligand)₂X₂]X (M = Ru(III) Rh(III) and Ir(III) X = Cl and Br) and [Pt(ligand)₂ X₂] X₂ (X = Cl, Br and 1/2SO₄). The deprotonated ligand forms the complexes of the formulae M(ligand-H)₃ and Pt(ligand-H)₃Cl. All these complexes have been characterized by elemental analysis, magnetic measurements, electronic and infrared spectral studies. All the complexes are six-coordinate octahedral.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Asymmetric transfer hydrogenation of aromatic ketones by Rh(I)/bimorpholine complexes

The asymmetric hydride transfer reduction of aromatic ketones, using a [Rh(cod)Cl]₂ complex as a catalyst and (3S,3′S)-bimorpholine as a chiral ligand, was studied. By varying the amount of ligand, basic co-catalyst and temperature, high yields (>90%) and good enantiomeric excesses of the alcohols (ee up to 83%) were achieved.     

Synthesis and reactivity of some isocyanide complexes of iridium(I)

Several isocyanide complexes [Ir(RNC)₄]X (I) (R = p-CH₃C₆H₄, X = I; R = p-CH₃OC₆H₄, X = I and PF₆) and [Ir(RNC)₂(PPh₃)₃] ClO₄(II) (R = p-CH₃C₆H₄ and p-CH₃OC₆H₄) have been prepared by the reactions of [Ir(COD)Cl]₂ and [Ir(COD)(PPh₃)₂]ClO₄ (COD = l,5-cyclooctadiene) with aryIisocyanides, respectively. Oxidative addition reactions of I and II with halogens, and II with π-acids such as tetracyanoethylene(TCNE), fumaronitrile, maleic anhydride, dimethyl fumarate, acrylonitrile, and dimethyl acetylenedicarboxylate are described. The structures of I, II and the π-acid addition products of II, [Ir(p-CH₃C₆H₄NC)₂ (PPh₃)₂ (π-acid)]ClO₄ (IV) (π-acid = TCNE, fumaronitrile, maleic anhydride, and acetylene dicarboxylate), are discussed on the basis of their electronic, IR, and NMR spectra. Especially, I is suggested to have an unusual layer structure involving Ir to Ir interaction, the result of which is relatively low reactivity in oxidative addition reactions. Trigonal bipyramidal configurations are suggested for IV with the two isocyanides in the trans and cis positions for the olefin and acetylene adducts, respectively.     

Synthesis reactivity and electrochemical properties of substituted cyclopentadienyl cobalt (III) complexes

Cyclopentadienyl cobalt complexes (η⁵‐C₅H₄R) CoLI₂ [L = CO,R=‐COOCH₂CH=CH₂ (3); L=PPh₃, R=‐COOCH₂‐CH=CH₂ (6); L=P(p‐C₆H₄O₃)₃, R = ‐COOC(CH₃) = CH₂ (7), ‐COOCH₂C₆H₅ (8), ‐COOCH₂CH = CH₂ (9)] were prepared and characterized by elemental analyses, ¹H NMR, ER and UV‐vis spectra. The reaction of complexes (η⁵‐C₅H₄R)CoLI₂ [L= CO, R= ‐COOC(CH₃) = CH₂ (1), ‐COOCH₂C₆H₅(2); L=PPh₃, R=‐COOC (CH₃) = CH₂ (4), ‐COOCH₂C₆H₅ (5)] with Na‐Hg resulted in the formation of their corresponding substituted cobaltocene (η⁵‐C₅H₄R)₂ Co[R=‐COOC(CH₃) = CH₂ (10), ‐COOCH₂C₆H₅ (11)]. The electrochemical properties of these complexes 1–11 were studied by cyclic voltammetry. It was found that as the ligand (L) of the cobalt (III) complexes changing from CO to PPh₃ and P(p‐tolyl)₃, their oxidation potentials increased gradually. The cyclic voltammetry of α,α′‐substituted cobaltocene showed reversible oxidation of one electron process.     

Mixed-ligand complexes of Ru(III) and Rh(III): ESR studies on some Ru(III) complexes

Reactions of 2-mercapto-3-phenyl-4-quinazolinone (LH) with RuCl₃·xH₂O and RhCl₃·xH₂O afforded the compounds [RuL₂Cl(H₂O)]H₂O, [RuL₂Cl·DMFI and RhL(LH)Cl₂·2H₂O. Reactions of LH with RuCl₃·xH₂O in the presence of N-heterocyclic bases led to the formation of complexes of type [RuL₂ClB]·H₂O (B = pyridine, 3-picoline or imidazole) and [RuLCl₂(o-phen)] H₂O (o-phen = 1, 10-phenanthroline). These complexes were characterized on the basis of analytical, conductivity, magnetic, IR and electronic spectral and ESR studies. Tentative structures for the complexes are proposed.     

Ketiminate supported aluminum(III) complexes: Synthesis, characterization and reactivity

The reaction of LLi, (L = [RNC(Me)CHC(Me) = O] (R = C₂H₄NEt₂)), with AlCl₃ at −78 °C forms the mono-ketiminate product, LAlCl₂, 1, while the same reaction at 0 °C affords the bis-ketiminate complex, [{(LH)₂AlCl}(Cl₂)], 2, Reduction of 1 with Li^o, K^o or Mg^o yielded an unusual dimeric aluminum(III) species, [L′AlCl]₂, 3, where C-C coupling of the ligand backbone is observed.