Thiophene,Selenophene, and Tellurophene‐based Three‐Dimensional Organic Frameworks

3D frameworks are important because of their potential to combine the advantageous properties of porous materials with those associated with polymers. A series of novel 3D aromatic frameworks are presented that incorporate the heterocycles thiophene, selenophene, and tellurophene. The specific surface area and pore width of frameworks depends on the element that is used to build the framework. Optoelectronic properties are element‐dependent, with heavy atoms red‐shifting the optical properties and decreasing the energy gap of the solid. The metalloid nature of tellurophene allows the properties of this material to be tuned based on its oxidation state, even as an insoluble solid. The incorporation of the optoelectronic active thiophene, selenophene, and tellurophene units and the effect that they have on properties was studied. A supercapcitor device was fabricated using these frameworks, showing that these 3D frameworks are promising for optoelectronic uses.     

Thiophene,Selenophene, and Tellurophene‐based Three‐Dimensional Organic Frameworks

3D frameworks are important because of their potential to combine the advantageous properties of porous materials with those associated with polymers. A series of novel 3D aromatic frameworks are presented that incorporate the heterocycles thiophene, selenophene, and tellurophene. The specific surface area and pore width of frameworks depends on the element that is used to build the framework. Optoelectronic properties are element‐dependent, with heavy atoms red‐shifting the optical properties and decreasing the energy gap of the solid. The metalloid nature of tellurophene allows the properties of this material to be tuned based on its oxidation state, even as an insoluble solid. The incorporation of the optoelectronic active thiophene, selenophene, and tellurophene units and the effect that they have on properties was studied. A supercapcitor device was fabricated using these frameworks, showing that these 3D frameworks are promising for optoelectronic uses.     

Benzooxadiazaole‐based D–A–D co‐oligomers: Synthesis and electropolymerization

Four D–A–D type co‐oligomers have been synthesized by Stille condensation between monostannyl derivatives of furan/thiophene/selenophene/3,4‐ethylenedioxythiophene (EDOT) and 4,7‐dibromo‐benzo[1,2,5]oxadiazole. All these co‐oligomers were successfully electrochemically polymerized in dichloromethane and characterized by spectroelectrochemistry. All four polymers possess narrow optical band gap. Spectroelectrochemical studies of polymer films on indium tin oxide revealed that the replacement of donor EDOT with furan/thiophene/selenophene has affected the low‐energy charge‐carrier (bipolaron) formation significantly. Kinetic studies based on chronoamperometry show that the polymer P5 (EDOT‐capped benzo[1,2,5]oxadiazole system) possess better electrochromic property with high transmittance (66%) in visible region than the other copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cyclopenta[c]selenophene based cooligomers and their polymers: comparative study with thiophene analogues

Selenophene and thiophene capped cyclopenta[c]selenophenes were synthesized and characterized. Crystal structure determination of some representative compounds revealed that the substitution at 3,4-position in the form of cyclopentane ring of selenophene or thiophene does not make any significant twist in the trimer backbone, making the cooligomer nearly planar. All the cooligomers were electrochemically polymerized and compared with thiophene capped cyclopenta[c]thiophene polymer. DFT calculations predict that the cyclopentane substitution on the third repeating unit (and in general) of one dimensional polymer neither disturb the planarity nor causes any significant twist on the polymeric backbone unlike the 3,4-dialkyl substitution. The electrochemically prepared selenophene based polymers showed low band gap compared to that of thiophene analogues. Cyclopentane substitution on selenophene as well as thiophene makes the resulting polymer oxidatively more stable when compared to more familiar poly-ethylenedioxythiophene (PEDOT) or poly-ethylenedioxyselenophene (PEDOS) systems. Alternate polymers of cyclopenta[c]selenophenes (CPS)/cyclopenta[c]thiophene (CPT) and thiophene/selenophene possess the energy of HOMO and LUMO significantly lower than that of homopolymers of CPS and CPT, however, possess higher band gap than PCPS.     

Light‐emitting copolymers based on fluorene and selenophene—Comparative studies with its sulfur analogue: Poly(fluorene‐co‐thiophene)

A series of soluble conjugated copolymers derived from 9,9‐dioctylfluorene (FO) and selenophene (SeH) was synthesized by a palladium‐catalyzed Suzuki coupling reaction with various feed ratios of SeH to FO less than or equal to 50%. The efficient energy transfer from fluorene segments to narrow band‐gap selenophene sites was observed. In comparison with the very well studied copolymer poly(fluorene‐co‐thiophene), poly(9,9‐dioctylfluorene‐co‐selenophene) (PFO‐SeH) shows redshifted photoluminescence (PL) and electroluminescence (EL) emission. PL spectra of the PFO‐SeH copolymers show a significant redshift along with increasing selenophene content in the copolymers and also with increasing polymer concentration in solution. PL quantum efficiency of the selenophene‐containing PFO copolymer is much lower than that of corresponding PFO‐thiophene (Th) copolymers. All these features of PFO‐SeH copolymers can be explained by the difference in aromaticity of selenophene and thiophene heterocycles and the heavy atom effect of Se in comparison with S‐atoms. The device fabricated with PFO‐SeH15 as the emissive layer exhibited high external quantum efficiency (0.51%) at a luminance of 1570 cd/m². Device performance is limited by electron injection and the strong quenching effect of Se atoms. Devices with PFO‐SeH copolymers blended into PFO homopolymers show significant improvement in device performance. External quantum efficiency as high as 1.7% can be obtained for PFO‐SeH30/PFO blend devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 823–836, 2005     

Random poly(3‐hexylthiophene‐co‐3‐cyanothiophene‐co‐3‐(2‐ethylhexyl)thiophene) copolymers with high open‐circuit voltage in polymer solar cells

For the purpose of developing poly(3‐hexylthiophene) (P3HT) based copolymers with deep‐lying highest occupied molecular orbital (HOMO) levels for polymer solar cells with high open‐circuit voltage (V_oc), we report a combined approach of random incorporation of 3‐cyanothiophene (CNT) and 3‐(2‐ethylhexyl)thiophene (EHT) units into the P3HT backbone. This strategy is designed to overcome CNT content limitations in recently reported P3HT‐CNT copolymers, where incorporation of more than 15% of CNT into the polymer backbone leads to impaired polymer solubility and raises the HOMO level. This new approach allows incorporation of a larger CNT content, reaching even lower‐lying HOMO levels. Importantly, a very low HOMO level of ?5.78 eV was obtained, representing one of the lowest HOMO values for exclusively thiophene‐based polymers. Lower HOMO levels result in higher V_oc and higher power conversion efficiencies (PCE) compared to the previously reported P3HT‐CNT copolymers containing only 3‐hexylthiophene and CNT units. As a result, solar cells based on P3HT‐CNT‐EHT(15:15) , which contains 70% of P3HT, 15% of CNT and 15% of EHT, yield a V_oc of 0.83 V in blends with PC₆₁BM while preserving high fill factor (FF) and high short‐circuit current density (J_sc), resulting in 3.6% PCE. Additionally, we explored the effect of polymer number‐average molecular weight (M_n) on the optoelectronic properties and solar cell performance for the example of P3HT‐CNT‐EHT(15:15). The organic photovoltaic (OPV) performance improves with polymer M_n increasing from 3.4 to 6.7 to 9.6 kDa and then it declines as M_n further increases to 9.9 and to 16.2 kDa. The molecular weight study highlights the importance of not only the solar cell optimization, but also the significance of individual polymer properties optimization, in order to fully explore the potential of any given polymer in OPVs. The broader ramification of this study lies in potential application of these high band gap copolymers with low‐lying HOMO level in the development of ternary blend photovoltaics as well as tandem OPV. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1526–1536     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Synthesis,hole mobility,and photovoltaic properties of two alternating poly[3‐(hex‐1‐enyl)thiophene‐co‐thiophene]s

Two alternating poly[3‐(hex‐1‐enyl)thiophene‐co‐thiophene]s, Pa (with 77% trans‐isomer and 23% cis‐isomer) and Pb (with 100% trans‐isomer), were synthesized by the coupling of 2,5‐dibromo‐3‐hex‐1‐enyl‐thiophene to 2,5‐bis(tributylstannyl)thiophene via a Stille reaction and compared with poly(3‐hexylthiophene‐co‐thiophene) ( P1 ) to study the effect of changing the carbon(α)–carbon(β) single bond into a carbon–carbon double bond on the properties of the polymers. From P1 to Pb and to Pa , the ultraviolet–visible absorption peaks of the polymers were slightly redshifted, and their electrochemical bandgaps decreased by 0.05–0.1 eV. X‐ray diffraction analysis indicated that Pa had a better lamellar structure than Pb . The hole mobilities of the three polymers, determined with the space‐charge‐limited current model, were 5.23 × 10^?6 ( P1 ), 2.34 × 10^?4 ( Pb ), and 7.02 × 10^?4 cm²/V s ( Pa ). The power conversion efficiencies (PCEs) of polymer solar cells based on the three polymers were 0.87 ( P1 ), 1.16 ( Pb ), and 1.70% ( Pa ). The increase in the hole mobility and PCE revealed the important effect of changing the carbon(α)–carbon(β) single bond into a carbon–carbon double bond on the properties of polythiophene derivatives containing 3‐alkylthiophene. The strategy used in this work enlarges the thinking to obtain novel, efficient donor polymers for optoelectronic applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 629–638, 2007     

Modulation of optical and electronic properties of quinoxailine‐based conjugated polymers for organic photovoltaic cells

The synthesis of donor–acceptor type semiconducting copolymers is described. Quinoxaline (QX) or difluorinated quinoxaline (DFQX) derivatives serve as electron acceptors, while thiophene (T) or selenophene (Se) serve as electron donors. Alternating polymers are synthesized through Stille cross‐coupling, and their thermal stability, optical and electrochemical properties, field‐effect carrier mobilities, film crystallinities, and photovoltaic performances are investigated. The intramolecular charge transfer between the electron‐donating and electron‐accepting units in the backbone induces absorption from 450 to 750 nm. The optical band‐gap energies of the polymers are between 1.65 and 1.73 eV, and depend on the polymer structure. Organic photovoltaic cells fabricated using a polymer composed of DFQX and selenophene (PSe‐DFQX) exhibit a power conversion efficiency of 5.14% with an open‐circuit voltage of 0.78 V, a short‐circuit current density of 11.71 mA/cm², and fill factor of 0.57 under AM 1.5 G irradiation (100 mW cm^?2). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1904–1914     

New selenophene‐based low‐band gap conjugated polymers for organic photovoltaics

Low‐band gap selenophene‐based polymers were synthesized. Their optoelectronic and photovoltaic properties and space‐charge limited currents were compared with those of the related thiophene‐based polymers. The band gaps of the Se‐based derivatives were approximately 0.05–0.12 eV lower than those of their thiophene counterparts. Organic photovoltaic (OPV) devices based on the blends of these polymers and 1‐(3‐methoxycarbonyl)propyl‐1‐phenyl‐[6,6]‐C₇₁ (PC₇₁BM) were fabricated, and the maximum power conversion efficiency of the OPV device based on PSPSBT and PC₇₁BM was 3.1%—with a short‐circuit current density (J_sc) of 9.3 mA cm^?2, an open‐circuit voltage (V_oc) of 0.79 V, and a fill factor of 0.42—under AM 1.5 G illumination (100 mW cm^?2). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4550–4557     

Synthesis and characterization of low bandgap copolymers based on indenofluorene and thiophene derivative

A series of low band gap, highly soluble alternating conjugated copolymers, comprised of 11,11,12,12‐tetrahexylindenofluorene and thiophene derivatives ( P1‐P4 ), were synthesized via Pd‐catalyzed Suzuki coupling reaction with very good yields. Described here are the synthesis, thermal, optical, and electrochemical properties of these new copolymers as potential new active materials for electronic and optoelectronic device applications. P1 and P2 have electron donating non‐π‐substituents with ethylenedioxy and propylenedioxy bridging the 3,3 positions of the cyclopentadithiophene groups; whereas P3 and P4 have electron withdrawing π‐substituents (carbonyl and pyrazine groups on P3 and P4 , respectively). For the main absorptions in UV‐vis spectrum, P1 and P2 displayed more red absorptions in comparison with P3 and P4 . Nevertheless, much suppressed quantum yields are exhibited by P3 and P4 . The behaviors of P3 can be attributed to the significant charge transfer interactions between the π‐substituents and the conjugated polymer backbone that leads to a less allowed optical transition between the ground and the lowest excited state. For P4 , the weak fluoresence might associate with energy transfer from indenofluorene to the low band gap thiophene‐pyrazinethiophene‐thiophene (T‐PT‐T) unit. In comparison with the corresponding polymers containing fluorene instead of indenofluorene, the use of indenofluorene exhibited mixed effects on the optical properties and improved solubility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5044–5056, 2009     

Small band gap conjugated polymers based on thiophene–thienopyrazine copolymers

In this study, five small band gap thiophene ( TH )–thienopyrazine ( TP ) conjugated copolymers were synthesized by Stille‐coupling reaction. The polymer structures consisted of one to four thiophene rings with the TP of different side groups provided a systematical investigation on the structure–electronic property relationship. The absorption maxima of the polymer films decreased from 850 to 590 nm as the thiophene moieties increased from thiophene to quaterthiophene. The optical and electrochemical band gaps of the studied poly[2,3‐didodecyl‐5‐(thiophen‐2‐yl)thieno[3,4‐b]pyrazine] ( PTHTP‐C12 ) were 0.97 and 0.78 eV, respectively, indicating a significant intramolecular charge transfer. The theoretical geometry and electronic properties of the TH ‐ TP copolymers by the density functional theory at the B3LYP level and 6‐31G(d) basis set suggested that the bond length alternation enlarged with enhancing the thiophene content and resulted in the variation on the polymer band gap. The relatively small theoretical effective mass of poly( TH ‐alt‐ TP ) also indicated its potential applications for field transistor applications. Our study demonstrates the tunable electronic properties of small band gap copolymers by the thiophene content and the resulted geometry variation. Such polymers could be potentially used for near‐infrared electronic and optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5872–5883, 2007     

Recent progresses on solution-processed silver nanowire based transparent conducting electrodes for organic solar cells

Organic photovoltaics (OPVs) are considered as a future alternative for conventional silicon based solar cells, owing to their low cost, ease of production and high-throughput. The transparent conducting electrode (TCE) is a fundamental component of OPVs. Traditionally, indium tin oxide (ITO) has been mainly utilized as a TCE in OPV applications due to its relatively high transparency and low sheet resistance. However, increasing demand for the optoelectronic devices has led to large fluctuations in ITO prices in the past decade and ITO is known to account more than 50% of the total cost of OPV devices. Thus, it is believed that development of solution-processable alternative materials is of great importance in reducing the cost of OPVs. Numerous materials, including silver nanowires, carbon nanotubes, graphene and conducting polymers, have been offered as replacements for ITO. This article reviews recent progress on fabrication of TCE via solution based coating techniques of silver nanowires (Ag NWs). In addition, performance of the Ag NWs based TCE in OPVs is summarized. Finally, we explore the future outlook for Ag NWs based TCE at the end of the review.     

3,6‐Dialkylthieno[3,2‐b]thiophene moiety as a soluble and electron donating unit preserving the coplanarity of photovoltaic low band gap copolymers

It has been shown recently, that the presence of alkyl side chains at the 3‐positions on the thiophene rings placed next to 2,1,3‐benzothiadiazole core in the backbone of several conjugated polymers results in severe steric hindrance and prevents efficient planarity of the thiophene‐2,1,3‐benzothiadiazole‐thiophene (TBzT) segment. Both properties have a strong influence on the optoelectronic properties of the polymer and need to be considered when the polymer is to be used for organic electronics applications. In this work, we modified a previously synthesized oligothiophene copolymer, consisting of two 3,4′‐dialkyl‐2,2′‐bithiophene units attached to a 2,1,3‐benzothiadiazole unit (TBzT segment) and a thieno[3,2‐b]thiophene unit, by optimizing the lateral alkyl side chains following a density functional theory investigation. It is demonstrated that eliminating the alkyl side chains from the 3‐positions of the TBzT segment and anchoring them onto the thieno[3,2‐b]thiophene, using an efficient synthesis of the 3,6‐dihexylthieno[3,2‐b]thiophene unit, allows us to reduce the energy band gap. In addition, the chemical modification leads to a better charge transport and to an enhanced photovoltaic efficiency of polymer/fullerene blends. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Designing Alternative Non‐Fullerene Molecular Electron Acceptors for Solution‐Processable Organic Photovoltaics

Until recently, solution‐processable organic photovoltaics (OPVs) mainly relied on fullerene derivatives as the n‐type material, paired with a p‐type conjugated polymer. However, fullerene derivatives have disadvantages that limit OPV performance, thus fueling research of non‐fullerene acceptors (NFAs). Initially, NFAs showed poor performance due to difficulties in obtaining favorable blend morphologies. One example is our work with 2,6‐dialkylamino core‐substituted naphthalene diimides. Researchers then learned to control blend morphology by NFA molecular design. To limit miscibility with polymer while preventing excessive self‐aggregation, non‐planar, twisted or 3D structures were reported. An example of a 3D structure is our work with homoleptic zinc(II) complexes of azadipyrromethene. The most recent design is a planar A‐D‐A conjugated system where the D unit is rigid and has orthogonal side chains to control aggregation. These have propelled power conversion efficiencies (PCEs) to ～14 %, surpassing fullerene‐based OPVs. These exciting new developments prompt further investigations of NFAs and provide a bright future for OPVs.     

Synthesis of π‐conjugated polymer containing both thiophene and phosphole sulfide in the main chain by simultaneous post‐element transformation of organotitanium polymer

The synthesis and unique optoelectronic features of a π‐conjugated polymer containing both thiophene and 1‐phenylphosphole sulfide units (multiple heteroles) in the main chain by the post‐element transformation of a regioregular organometallic polymer possessing titanacyclopentadiene‐2,5‐diyl unit are described. The π‐conjugated polymer containing multiple heteroles was obtained in 73% yield by the simultaneous reaction of the organotitanium polymer with sulfur monochloride and dichlorophenylphosphine (0.6 equiv each), whose number‐average molecular weight (M_n) and the molecular‐weight distribution (M_w/M_n) were estimated to be 11,000 and 3.4, respectively, by the size exclusion chromatography (SEC). The π‐conjugated polymer thus obtained was found to have the high HOMO and the low LUMO energy levels due to the electron‐rich thiophene and electron‐deficient phosphole sulfide units, respectively, as supported by its cyclic voltammetry (CV) analysis. Compared to a mixture of a polymer containing sole thiophene‐unit and that containing sole phosphole sulfide units, the π‐conjugated polymer‐containing multiple heteroles proved to exhibit interesting optical properties. For example, a specific emission peak was observed at 608 nm in the photoluminescence spectrum, which was not observed in the case of the thiophene‐containing polymer, the phosphole‐containing polymer, and their mixture. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2519–2525     

Theoretical DFT and experimental Raman and NMR studies on thiophene, 3-methylthiophene and selenophene

The results of extended MO calculations using density functional theory (DFT) approximation supported by experimental Raman, ¹H and ¹³C NMR studies on thiophene are reported. Raman spectra of liquid thiophene were re-examined and the performance of a hybrid B3PW91 density functional was compared with the ab initio restricted Hartree–Fock (RHF) method. With the basis sets of the 6-311++G^** quality, the DFT calculated bond lengths, dipole moments and harmonic vibrations were predicted in a very good agreement with available experimental data.

Additionally, the results on thiophene were extended by calculations on 3-methylthiophene and selenophene. In this case, a significant change in geometry and charge distribution in thiophene ring due to a methyl group substituent or replacement of sulphur by selene atom was observed.

A linear correlation between the predicted harmonic vibrational frequencies (scaled using SQM method) and experimental ones for thiophene, selenophene and 3-methylthiophene was shown. The theoretically calculated spectra have satisfactorily reproduced the available experimental spectra for thiophene and selenophene.     

Structural Design and Applications of Stereoregular Fused Thiophenes and Their Oligomers and Polymers

Abstract

Stereoregular fused thiophenes (SFTs: especially thieno[3,2-b]thiophene (TT) and dithieo[3,2-b:2′,3′-d]thiophene (DTT)), as stable conjugated structures deriving from thiophene ring enlargement, possess outstanding properties and special configuration, such as the superior carrier transfer efficiency and a high degree backbone of planarity. In comparison to stand-alone SFTs structures, oligomers and polymers containing different heteroaromatic units have been much widely researched and used in many fields. In decade, several important reviews have summarized the broad field of fused thiophenes including SFTs, and their synthesis and optoelectronic applications. Here, we critically present the structure–performance relationships and application of oligomers and polymers containing SFTs (exhibiting thiophene ring number from 2 to 7) units. First, the basic structures and properties of SFTs are briefly stated. Then, oligomers classified by extra conjugated heterocyclic attachments are carefully discussed, focusing on the structure–performance relationships for their optoelectronic applications including organic photovoltaic cells and organic field-effect transistors. Moreover, such relationships in polymers have been applied in much wider fields such as organic light-emitting diodes, electrochromic devices, thermoelectric devices, and supercapacitors are discussed. Finally, a summary and prospect are given. Through this review, instruction for molecular design and novel ideas for the future development of SFTs-contained are provided.     

New π‐Conjugated polymers containing 4H,4′H‐[1,1′‐Bithieno [3,4‐C]Pyrrole]‐4,4′,6,6′(5H,5′H)‐Tetraone (biTPD) units and their application to thin‐Film transistors and photovoltaic cells

We successfully synthesized new D‐A copolymers that employ 1,10‐bithienopyrrolodione (biTPD), thiophene, and selenophene‐based donor monomeric units. Two polymers, PBTPDEBT and PBTPDEBS , exhibited high degrees of crystallinity and unique polymer chain arrangements on the substrate, which is attributed to their enhanced coplanarity and intermolecular interactions between the polymer chains. Among the thin‐film transistor devices made of PBTPDEBT and PBTPDEBS , the annealed PBTPDEBS device displayed relatively high hole mobility, which was twice that of the PBTPDEBT ‐based device. In addition, an organic photovoltaic device based on a PBTPDEBS :PC₇₁BM blend displayed the maximum power conversion efficiency of 3.85%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1228–1235     

Thermal methods for the synthesis of thiophene, selenophene, and their derivatives. (Review)

The literature data concerned with thermal reactions producing thiophene, selenophene, and their derivatives are systematized and reviewed. The mechanisms of these reactions are examined and conditions for the formation of thiophene and selenophene heterocycles are formulated.Irkutsk Institute of Chemistry, Siberian Branch, Russian Academy of Sciences, Irkutsk 664039, Russia; e-mail: vlad@irioch.ira.ru. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 3–18, January, 2000.