Synthesis of regioregular poly(3‐octylthiophene)s via Suzuki polycondensation and end‐group analysis by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Regioregular poly(3‐octylthiophene)s were synthesized through a palladium‐catalyzed Suzuki polycondensation of 2‐(5‐iodo‐4‐octyl‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane. The effects of the palladium catalyst {tetrakis(triphenylphosphine)palladium(0) [Pd(PPh₃)₄], palladium(II) acetate [Pd(OAc)₂], [1, 1′‐bis(diphenylphosphino)ferrocene]dichloropalladium(II) [Pd(dppf)Cl₂], tris(dibenzylideneacetone)dipalladium(0), or bis(triphenylphosphine)palladium(II) dichloride [Pd(PPh₃)₂Cl₂]} and the reaction conditions (bases and solvents) were investigated. NMR spectroscopy revealed that poly(3‐octylthiophene)s prepared via this route were essentially regioregular. According to size exclusion chromatography, the highest molecular weights were obtained with in situ generated Pd(PPh₃)₄ and tetrakis(tri‐o‐tolylphosphine]palladium(0) {Pd[P(o‐Tol)₃]₄} catalysts or more reactive, phosphine‐free Pd(OAc)₂. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry was used to analyze end groups and allowed the determination of some mechanistic aspects of the Suzuki polycondensation. The polymers were commonly terminated with hydrogen or iodine as a result of deboronation and some deiodination. Pd(PPh₃)₄, Pd(PPh₃)₂Cl₂, and Pd[P(o‐Tol)₃]₄ induced aryl–aryl exchange reactions with the palladium center and resulted in some chains having phenyl‐ and o‐tolyl‐capped chain ends. Pd(dppf)Cl₂ yielded only one type of chain, and it had hydrogen end groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1454–1462, 2005     

Amidophosphine‐stabilized palladium complexes catalyse Suzuki–Miyaura cross‐couplings in aqueous media

We report a simple and efficient procedure for Suzuki–Miyaura reactions in aqueous media catalysed by amidophosphine‐stabilized palladium complexes trans‐{L³PPh₂}₂PdCl₂ ( 3 ), trans‐{L³PPhtBu}₂PdCl₂ ( 4 ), [Pd(η³‐C₃H₅)(L³PPh₂)Cl] ( 5 ) and {Pd[2‐(Me₂NCH₂)C₆H₄](L³PPh₂)Cl} ( 6 ). The acidity of the NH proton in complexes 3 , 4 , 5 , 6 plays an important role in their catalytic activity. In addition, the palladium complexes cis‐{L¹PPh₂}PdCl₂ ( 1 ) and trans‐{L²PPh₂}₂PdCl₂ ( 2 ) stabilized by phosphines containing Y,C,Y‐chelating ligands L^1,2 have also been found to be useful catalysts for Suzuki–Miyaura reactions in aqueous media. The method can be effectively applied to both activated and deactivated aryl bromides yielding high or moderate conversions. The catalytic activity of couplings performed in pure water increases when utilizing a Pd complex with more acidic NH protons. A decrease of palladium concentration from 1.0 to 0.5 mol% does not lead to a substantial loss of conversion. In addition, Pd complex 1 can be efficiently recovered using two‐phase system extraction. Copyright © 2016 John Wiley & Sons, Ltd.     

A highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane as building block

Highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes via palladium‐catalyzed Suzuki–Miyaura cross‐coupling of (E)‐alkenyl iodides with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane ( 1 ) is reported. The vinylboronate pinacol ester ( 1 ) acts as a vinyl building block to show high chemoselectivity for the Suzuki–Miyaura pathway versus Heck coupling in the presence of biphasic conditions (Pd(PPh₃)₄, aqueous K₂CO₃, toluene and ethanol). Copyright © 2014 John Wiley & Sons, Ltd.     

σ‐Alkylpalladium Intermediates in Intramolecular Heck Reactions:Isolation and Catalytic Activity

The isolation of σ‐alkylpalladium Heck intermediates, possible when β‐hydride elimination is inhibited, is a rather rare event. Performing intramolecular Heck reactions on N‐allyl‐2‐halobenzylamines in the presence of [Pd(PPh₃)₄], we isolated and characterized a series of stable bridged palladacycles containing an iodine or bromine atom on the palladium atom. Indolyl substrates were also tested for isolation of the corresponding complexes. X‐ray crystallographic analysis of one of the indolyl derivatives revealed the presence of a five‐membered palladacycle with the metal center bearing a PPh₃ ligand and an iodine atom in a cis position with respect to the nitrogen atom. The stability of the σ‐alkylpalladium complexes is probably a consequence of the strong constraint resulting from the bridged junction that hampers the cisoid conformation essential for β‐hydride elimination. Subsequently, the thus obtained bridged five‐membered palladacycles were proven to be effective precatalysts in Heck reactions as well as in cross‐coupling processes such as Suzuki and Stille reactions.     

Synthesis of α‐(Fluorophenyl)pyridine by Palladium‐Catalyzed Cross‐Coupling Reaction

A series of α‐(fluoro‐substituted phenyl)pyridines have been synthesized by means of a palladium‐catalyzed cross‐coupling reaction between fluoro‐substituted phenylboronic acid and 2‐bromopyridine or its derivatives. The reactivities of the phenylboronic acids containing di‐ and tri‐fluoro substituents with α‐pyridyl bromide were investigated in different catalyst systems. Unsuccessful results were observed in the Pd/C and PPh₃ catalyst system due to phenylboronic acid containing electron‐withdrawing F atom(s). For the catalyst system of Pd(OAc)₂/PPh₃, the reactions gave moderate yields of 55% –80%, meanwhile, affording 10% –20% of dimerisation (self‐coupling) by‐products, but trace products were obtained in coupling with 2,4‐difluorophenylboronic acids because of steric hinderance. Pd(PPh₃)₄ was more reactive for boronic acids with sterically hindering F atom(s), and the coupling reactions gave good yields of 90% and 91% without any self‐coupling by‐product.     

Synthesis of Long,Palladium End‐Capped Polyynes through the Use of Asymmetric 1‐Iodopolyynes

The synthesis of a unique series of long, asymmetric 1‐iodopolyynes ( 1 ‐C_nI and 2 ‐C_nI) with the sp‐hybridized carbon chain up to a decapentayne is reported. These compounds were then used as substrates in reactions with Pd(PPh₃)₄ leading to another series of palladium end‐capped polyynes, which were unstable in solution. Organometallic octatetraynes 1 ‐C₈[Pd]I, 2 ‐C₈[Pd]I, and decapentayne 1 ‐C₁₀[Pd]I are palladium end‐capped polyyne compounds with the longest carbon chains reported so far. All the complexes as well as their organic precursors were fully characterized by NMR, HRMS(ESI), IR, TGA‐DTA, and UV/Vis techniques, and the X‐ray crystal structures of two silyl‐protected precursors and one palladium complex are presented. The synthetic approach for palladium species is envisioned as a general route for the synthesis of labile organometallic polyynes.     

Triphenylphosphinopalladium(II) complexes with ONO‐donor ligands: syntheses,structures and catalytic applications in C?C cross‐coupling reactions

Reactions of 1‐((2‐hydroxy‐5‐R‐phenylimino)methyl)naphthalen‐2‐ols (H₂Lⁿ , n  = 1–3 for R = H, Me, Cl, respectively) with [Pd(PPh₃)₂Cl₂] and Et₃N in toluene under reflux produced three new mononuclear square‐planar palladium(II) complexes with the general formula [Pd(Lⁿ )(PPh₃)] ( 1 , R = H; 2 , R = Me; 3 , R = Cl). All the complexes were characterized using elemental analysis, solution conductivity and various spectroscopic (infrared, UV–visible and NMR) measurements. Molecular structures of 1 , 2 , 3 were confirmed using single‐crystal X‐ray diffraction analysis. In each complex, the fused 5,6‐membered chelate rings forming phenolate‐O, azomethine‐N and naphtholate‐O donor (Lⁿ )²⁻ and the PPh₃ form a square‐planar ONOP coordination environment around the metal centre. Infrared and NMR spectroscopic features of 1 , 2 , 3 are consistent with their molecular structures. Electronic spectra of the three complexes display several strong primarily ligand‐centred absorption bands in the range 322–476 nm. All the complexes were found to be effective catalysts for carbon–carbon cross‐coupling reactions of arylboronic acids with aromatic and heteroaromatic aldehydes to form the corresponding diaryl ketones. Copyright © 2016 John Wiley & Sons, Ltd.     

Tris[tri(2‐thienyl)phosphine]palladium as the catalyst precursor for thiophene‐based Suzuki‐Miyaura crosscoupling and polycondensation

Zero‐valent palladium complex, Pd(PTh₃)₃, with three tri(2‐thienyl)phosphine ligands was prepared and characterized. Pd(PTh₃)₃ is superior to Pd(PPh₃)₄ in catalyzing Suzuki‐Miyaura coupling and polymerization of thiophene‐based derivatives. The Suzuki polycondensation of 3‐hexyl‐5‐iodothiophene‐2‐boronic pinacol ester with Pd(PTh₃)₃ as the catalyst precursor afforded high‐molecular‐weight P3HT with high regularity and yield. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4556–4563, 2008     

Kinetico‐Mechanistic Insights on the Assembling Dynamics of Allyl‐Cornered Metallacycles: The PtNpy Bond is the Keystone

The square‐like homo‐ and heterometallamacrocycles [{Pd(η³‐2‐Me‐C₃H₄)( L ⁿ )₂}₂{M(dppp)}₂](CF₃SO₃)₆ (dppp=1,3‐bis(diphenylphosphino)propane) and [{Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂}₂{M(PPh₃)₂}₂](CF₃SO₃)₆ [py=pyridine, M=Pd, Pt, L ^{n =}4‐PPh₂py ( L¹ ), 4‐C₆F₄PPh₂py ( L² )] containing allyl corners were synthesised by antisymbiotic self‐assembly of the different palladium and platinum metallic corners and the ambidentate N,P ligands. All the synthesised assemblies displayed a complex dynamic behaviour in solution, the rate of which is found to be dependent on the electronic and/or steric nature of the different building blocks. A kinetico‐mechanistic study by NMR line shape analysis of the dynamics of some of these assemblies was undertaken in order to determine the corresponding thermal activation parameters. Both an enhanced thermodynamic stability and slower dynamics were observed for platinum‐pyridine‐containing species when compared with their palladium analogues. Time‐dependent NMR spectroscopy in combination with ESI mass spectrometry was used to study the exchange between the assemblies and their building blocks, as well as that occurring between different metallamacrocycles. Preliminary studies were carried out on the activity of some of the metallamacrocyclic compounds as catalytic precursors in the allylic substitution reaction, and the results compared with that of the monometallic allylic corner [Pd(η³‐2‐Me‐C₃H₄)( L¹ )₂]⁺.     

Synthesis,Reactivity, and Crystal Structure of the η2‐Thiocarbamoyl Palladium Complex [Pd(PPh3)2(η2‐SCNMe2)][PF6]

The η¹‐thiocarbamoyl palladium complexes [Pd(PPh₃)(η¹‐SCNMe₂)(η²‐S₂R)] (R = P(OEt)₂, 2 ; CNEt₂, 3 ) and trans‐[Pd(PPh₃)₂(η¹‐SCNMe₂)(η¹‐Spy)], 4 , (pyS: pyridine‐2‐thionate) are prepared by reacting the η²‐thiocarbamoyl palladium complex [Pd(PPh₃)₂(η²‐SCNMe₂)][PF₆], 1 with (EtO)₂PS₂NH₄, Et₂NCS₂Na, and pySK in methanol at room temperature, respectively. Treatment of 1 with dppm (dppm: bis(diphenylphosphino)methane) in dichloromethane at room temperature gives complex [Pd(PPh₃)(η¹‐SCNMe₂)(η²‐dppm)] [PF₆], 5 . All of the complexes are identified by spectroscopic methods and complex 1 is determined by single‐crystal X‐ray diffraction.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Sulfur‐assisted Chloride and Triphenylphosphine Dissociation of Palladium(II) Complex with Phenyloxythiocarbonyl,PhOC(S), Containing Ligand: X‐Ray Structure of [Pd(PPh3)2{η1‐C(S)OPh}(Cl)]

Treatment of Pd(PPh₃)₄ with phenylchlorothionoformate, PhOC(S)Cl, in dichloromethane at ?20 °C produces the phenyloxythiocarbonyl complex [Pd(PPh₃)₂{η¹‐C(S)OPh}(Cl)], 1 . The ³¹P{¹H} NMR spectrum of 1 shows the dissociation of either the chloride or the triphenylphosphine ligand to form complex [Pd(PPh₃)₂(η²‐SCOPh)][Cl], 2 or the dipalladium complex [Pd(PPh₃)Cl]₂(μ,η²‐SCOPh)₂, 3 . Continuous stirring of the dichloromethane solution of 1 at room temperature for 4 h forms the dipalladinum complex [Pd(PPh₃)Cl]₂(μ,η²‐SCOPh)₂, 3 as the final product. Respective reactions of 1 and Et₂NCS₂Na or dppa {bis(diphenylphosphino)amine} gives complex [Pd(PPh₃){η¹‐C(S)OPh}(η²‐S₂CNEt₂)], 4 or [Pd(PPh₃){η¹‐C(S)OPh}(η²‐dppa)][Cl], 5 . Complex 1 is determined by single‐crystal X‐ray diffraction and crystallized in the monoclinic space group P2₁ with Z = 4. The cell dimensions of 1 are as follows: a = 9.5613(1) Å, b = 33.6732(3) Å, c = 12.2979(1) Å.     

Synthesis of substituted biaryls via Suzuki,Stille and Hiyama cross‐coupling and homo‐coupling reactions by CN‐dimeric and monomeric ortho‐palladated catalysts

The catalytic activity of dimeric [Pd{C₆H₂(CH₂CH₂NH₂)–(OMe)₂,2,3}(μ‐Br)]₂ and monomeric [Pd{C₆H₂(CH₂CH₂NH₂)–(OMe)₂,2,3}Br(PPh₃)] complexes as efficient, stable and air‐ and moisture‐tolerant catalysts was investigated in the Suzuki, Stille and Hiyama cross‐coupling and homo‐coupling reactions of various aryl halides. Substituted biaryls were produced in excellent yields in short reaction times using catalytic amounts of these complexes. The monomeric complex was demonstrated to be more active than the corresponding dimeric catalyst for the cross‐coupling reaction of unreactive aryl bromides and chlorides. The combination of homogeneous metal catalysts and microwave irradiation gave higher yields of products in shorter reaction times. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed Direct C2 Arylation of N‐Substituted Indoles with 1‐Aryltriazenes

A novel and efficient palladium‐catalyzed C2 arylation of N‐substituted indoles with 1‐aryltriazenes for the synthesis of 2‐arylindoles was developed. In the presence of BF₃ ? OEt₂ and palladium(II) acetate (Pd(OAc)₂), N‐substituted indoles reacted with 1‐aryltriazenes in N,N‐dimethylacetamide (DMAC) to afford the corresponding aryl–indole‐type products in good to excellent yields.     

A Non‐Phosgene Route Synthesis of Carbamate in Continuous Fixed Bed Reactor

A non‐phosgene route synthesis of carbamate was carried out in a continuous fixed‐bed reactor through oxidative carbonylation of aniline using palladium catalysts and sodium iodide as promoter. The activity, selectivity and stability of both carbon and alumina‐supported palladium catalysts were evaluated. It was found that the alumina‐supported catalyst system exhibited a higher activity and selectivity than that of the carbon‐supported system, and an average aniline conversion of 95.6% and carbamate selectivity of 74.6% were achieved for the Se‐Pd/Al₂O₃ catalyst after 91 h on stream. Reclamation analysis of the spent Pd/C catalyst suggested that the deactivation was mainly due to the leaching and sintering of palladium metal and the accumulation of insoluble chemicals on catalyst support also aggravated the decline of catalyst activity. When small amounts of selenium were added to the Pd/Al₂O₃ catalyst, its activity, selectivity and stability were significantly improved which indicated that a promotional effect existed for carbamate formation on a Pd‐Se catalyst system.     

Cationic palladium complex‐catalyzed carbonylation of 2,3‐dien‐1‐ols to 1,3‐diene‐2‐carboxylic acids and esters under mild conditions

A cationic palladium complex, [Pd(PPh₃)₂(MeCN)₂](BF₄)₂, catalyzed the carbonylation of 2,3‐dien‐1‐ols under mild conditions. The dienols bearing two or more alkyl substituents on the diene part afforded 1,3‐diene‐2‐carboxylic acids successfully in tetrahydrofuran (THF), while those possessing one or no alkyl substituent gave polymers of the products exclusively. The former afforded the corresponding methyl esters in good yields when the reactions were carried out in methanol, while the latter afforded mainly the Diels–Alder reaction products of the resulting esters. An alkylidene group‐substituted π‐allylpalladium species has been presumed to be an intermediate. Copyright © 2000 John Wiley & Sons, Ltd.     

Pd‐Catalyzed Cycloisomerization of 4‐Aza‐1,6‐enynes to 3‐Aza‐bicyclo[4.1.0]hept‐2‐enes

A method for the synthesis of bicyclo[4.1.0]heptenes from 1,6‐enynes through Pd‐catalyzed cycloisomerization has been developed. N‐ and O‐tethered 1,6‐enynes were successfully transformed to their corresponding 3‐aza‐ and 3‐oxabicyclo[4.1.0]heptenes in reasonable‐to‐high yields using the catalysts [PdCl₂(CH₃CN)₂]/P(OPh)₃ or [Pd(maleimidate)₂(PPh₃)₂] in toluene. The computational calculations using density functional theory indicate that [PdCl₂{P(OPh)₃}] in the oxidation state Pd^II acts as the active catalyst species for the formation of 3‐azabicyclo[4.1.0]heptenes through 6‐endo‐dig cyclization.     

The Nitrogen‐Assisted Triphenylphosphine Displacement of 3‐Hydroxypyridine and 3‐Aminopyridine Ligands in Palladium(II) Complexes: Crystal Structures of [Pd(PPh3)Br]2{μ,η2‐C5H3N(OH)}2 and [Pd(PPh3)Br]2{μ,η2‐C5H3N(NH2)}2

Treatment of Pd(PPh₃₎₄ with 2‐bromo‐3‐hydroxypyridine [C₅H₃N(OH)Br] and 3‐amino‐2‐bromopyridine [C₅H₃N(NH₂)Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃₎₂{η¹‐C₅H₃N(OH)}(Br)], 2 and [Pd(PPh₃₎₂{η¹‐C₅H₃N(NH₂)}(Br)], 3 , by substituting two triphenylphosphine ligands, respectively. In dichloromethane solution of complexes 2 and 3 at ambient temperature for 3 days, it undergo displacement of the triphenylphosphine ligand to form the dipalladium complexes [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(OH)}₂, 4 and [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(NH₂)}₂, 5 , in which the two 3‐hydroxypyridine and 3‐aminopyridine ligands coordinated through carbon to one metal center and bridging the other metal through nitrogen atom, respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

The Design and Synthesis of Novel 2,3‐Dihydrobenzo[f]isoquinolin‐4(1H)‐ones via Sequential Ugi–Heck Reactions by Using an Efficient Heterogeneous Palladium Nanocatalyst

A facile and efficient synthesis of N‐alkyl‐2‐(1, 2 dihydro‐1‐methylene‐4‐oxobenzo[f] isoquinoline‐3(4H)‐yl)‐2‐phenylacetamides is performed by the consecutive, two‐step procedure that consists of Ugi and Heck reactions. The Heck reaction was performed both by homogenous and a designed heterogeneous catalyst. The heterogeneous catalyst is a coordinated palladium to 1, 10‐phenanthroline attached to chitosan@Fe3O4 magnetite nanoparticles, which was shown to be more efficient than the homogenous Pd(OAc)₂/PPh₃ catalyst with good to excellent yields.     

A new type of palladium(0) complex having both electron-withdrawing and -donating sites in a ligand: 5,8-dihydro- and 5,8,9,10-tetrahydro-1,4-naphthoquinone complexes

A new type of palladium(0) complex, (5,8-dihydro-1,4-naphthoquinone)Pd(PPh₃)₂ and (5,8,9,10-tetrahydro-1,4-naphthoquinone)Pd(PPh₃)₂, having both olefin and quinone or dihydro-quinone sites in a ligand molecule was prepared. IR and ¹H NMR spectroscopic studies of these complexes suggested that it is the quinone or dihydro-quinone CC bond which is complexed to Pd. Ligand exchange reactions showed that the stability order of the olefinic quinone complexes was as follows: (1,4-naphthoquinone)Pd(PPh₃)₂ > (5,8-dihydro-1,4-naphthoquinone) Pd(PPh₃)₂>(5,8,9,10-tetrahydro-1,4-naphthoquinone)Pd(PPh₃)₂.