Determination of fluoride in drinking water and in urine of adolescents living in three counties in Northern Chihuahua Mexico using a fluoride ion selective electrode

This study was carried out to determine fluoride in drinking water and in urine of adolescents, ages 15-20 years, living in Northern Chihuahua Mexico. Participants are from a cross-sectional study on health effects of chronic fluoride exposure from drinking water. A total of 201 participants (106 female and 95 male) in the study were recruited from three counties. Samples of drinking water of each county were collected and analyzed using the U.S. EPA Fluoride Ion-Selective Method. Statistically significant difference of fluoride content in water was found among the three counties of recruitment (Cd. Juarez; 0.3 mg/L, Samalayuca, 1.0 mg/L, and Villa Ahumada, 5.3 mg/L). Fluoride content in wells and tap water samples of Villa Ahumada ranged from 5.0 to 5.7 mg/L. Fluoride content of these samples was above the level permitted by Mexican regulations. The fluoride content in bottled water obtained from local stores in Villa Ahumada ranged from 0.3 to 3.7 mg/l.Fluoride in urine samples of each participant was also analyzed using the U.S. EPA Ion-Selective Method. The mean fluoride urine concentration (reported in mg/g creatinine) in adolescents living in these counties was 0.792±0.39, 1.33±0.67 and 2.22±1.16 (Cd. Juarez, Samalayuca and Villa Ahumada), respectively. The high fluoride urinary levels found in participants from Villa Ahumada may be associated to the high fluoride level (5.3 mg/L) in dinking water.The accuracy of measurements was assessed with reference materials in water and in urine. Mean fluoride recovery was 99.0% and 99.6% in water and in urine, respectively. The levels obtained were within the assayed 5% confidence levels.     

Nanohybrid Chemosensor for the Simultaneous Detection of Fluoride and Iodide in Aqueous System and Its Utility in Real Samples

A nanohybrid chemosensor for specific, selective and simultaneous recognition of iodide and fluoride was prepared through decoration of silver nanoparticles onto Schiff‐Base based organic nanoparticles. The developed chemosensor showed specific recognition ability for this analytes at low concentrations with detection limits at 690 nM for fluoride and 11 nM for iodide in two different regions of DPV profiles. Theoretical calculations based in Density Functional Theory were performed, which supports experimental results by demonstrating the binding selectivity of nanohybrids with I^? and F^?. The proposed sensor was also used for real sample analysis and results were verified using some standard literature method.     

The sensing mechanism of fluoride anion for a novel molecule D2: Desilylation and intramolecular charge transfer

In this work, the sensing mechanism of a new fluoride chemosensor 12‐([tert‐butyldiphenylsilyl]oxy)‐8a,13a‐dihydro‐7H‐benzo[de]benzo[4,5]imidazo[2,1‐a]‐isoquinolin‐7‐one (abbreviated as D2) is investigated using density functional theory (DFT) and time‐dependent DFT (TDDFT) methods. The theoretical electronic spectra (vertical excitation energies and fluorescence peak) reproduced previous experimental results (D. Li et al., Spectrochim. Acta A Mol. Biomol. Spectrosc. 2017 , 185, 173), which confirms the rationality of the theoretical level used in this work. The constructed potential energy curve of the desilylation process suggests that the low barrier could be responsible for the rapid response to fluoride anions. Analyses of the binding energies show that only fluoride anion can be detected by D2 chemosensor in dimethylsulfoxide (DMSO). In view of the excitation process, the strong intramolecular charge transfer (ICT) process of the S₀ → S₁ transition explains the red shift of the absorption peak of the D2 sensor with the addition of fluoride anions. This work not only presents a straightforward sensing mechanism of sensing of the fluoride anion by the D2 chemosensor but should also play an important role in the synthesis and design of fluorescent sensors in future.     

Enhanced penetration of fluoride particles into bovine enamel by combining dielectrophoresis with AC electroosmosis

Fluoride deposition into the pores of enamel is necessary at high concentrations to reduce enamel demineralization and with a high degree of penetration to account for loss by ingestion. Current diffusion and electrochemical methods are inadequate for effectively transporting fluoride greater than 20 μm into enamel. The study explores the coupling of dielectrophoresis (DEP) and AC electroosmosis (ACEO) to selectively concentrate fluoride particles from fluoride gel excipients and enhance their penetration into enamel. By measuring the frequency response of approximately 10‐μm‐sized sodium fluoride particles in an aqueous gel media, appropriate frequencies for positive DEP, negative DEP, and ACEO are identified. An assembly composed of two cross‐planar interdigitated electrode (IDE) arrays with open slots is driven successively by fields at appropriate frequencies to drive fluoride particles through the slots of the IDE and into the enamel pores using a combination of DEP and ACEO methods. Fluoride uptake and penetration of 1.23% acidulated phosphate fluoride gel into bovine tooth enamel at various depths is measured using wavelength dispersive spectrometry to compare deposition by diffusion, DEP, and DEP plus ACEO. Fluoride levels in all DEP groups were significantly higher than diffusion groups at depths 10 and 20 μm. The highest fluoride concentrations at 10, 20, 50, and 100 μm depths occur under deposition conditions combining DEP with ACEO. Fluoride levels at 50 μm were equivalent to long‐term prophylactic exposure. These methods may potentially benefit populations at high risk for development of caries and periodontal disease, including underserved children and disparate groups.     

Metal-free synthesis of calixsalen-type cavitands for the recognition of fluoride ion

Novel calixsalen-type cavitands have been synthesized using metal-free synthesis from simple and inexpensive materials, such as ethylenediamine and 5,5′-methylene-bis-salicylaldehyde derivatives. The cavitand 1 containing salen functionality recognizes fluoride ion. Fluoride ions switch on fluorescence on binding with the cavitand 1. Substitution on bis-salicylaldehyde part of calixsalen-type cavitand shows change in recognition behavior. On the attachment of electron withdrawing substituent, such as nitro group, the cavitand lost its fluorescence properties but proved to be a better colorimetric probe showing marked color change from pale yellow to red on addition of tetrabutyl ammonium salt of fluoride ion to the solution of cavitand. The nitro substituted cavitand is highly sensitive and selective for fluoride anion and hence is a promising candidate for development of colorimetric chemosensor. The binding of the cavitands with fluoride ion is investigated using ¹H NMR-titration experiments.     

A PEGylated Fluorescent Turn‐On Sensor for Detecting Fluoride Ions in Totally Aqueous Media and Its Imaging in Live Cells

Owing to the considerable significance of fluoride anions for health and environmental issues, it is of great importance to develop methods that can rapidly, sensitively and selectively detect the fluoride anion in aqueous media and biological samples. Herein, we demonstrate a robust fluorescent turn‐on sensor for detecting the fluoride ion in a totally aqueous solution. In this study, a biocompatible hydrophilic polymer poly(ethylene glycol) (PEG) is incorporated into the sensing system to ensure water solubility and to enhance biocompatibility. tert‐Butyldiphenylsilyl (TBDPS) groups were then covalently introduced onto the fluorescein moiety, which effectively quenched the fluorescence of the sensor. Upon addition of fluoride ion, the selective fluoride‐mediated cleavage of the Si? O bond leads to the recovery of the fluorescein moiety, resulting in a dramatic increase in fluorescence intensity under visible light excitation. The sensor is responsive and highly selective for the fluoride anion over other common anions; it also exhibits a very low detection limit of 19 ppb. In addition, this sensor is operative in some real samples such as running water, urine, and serum and can accurately detect fluoride ions in these samples. The cytotoxicity of the sensor was determined to be Grade I toxicity according to United States Pharmacopoeia and ISO 10993‐5, suggesting the very low cytotoxicity of the sensor. Moreover, it was found that the senor could be readily internalized by both HeLa and L929 cells and the sensor could be utilized to track fluoride level changes inside the cells.     

Highly Sensitive and Selective Fluoride Ion Chemosensing,Fluoroalkylated Polysilane

Summary: This paper reports a new and simple approach for the amplified detection of fluoride ions by a polymer‐based chemosensor made of stiff fluoroalkylated polysilane, poly(3,3,3‐trifluoropropylmethylsilane). This chemosensor exhibited extreme sensitivity and selectivity towards fluoride ions by a decrease in the photoluminescence (PL) intensity with parts per billion concentrations of fluoride ions in solution in tetrahydrofuran (THF). The quenching constant for fluoride ions (K = 1.35 × 10⁷ M ⁻¹) was found to be exceptionally high.

Schematic representation of the polymer amplification mechanism after addition of fluoride ion in tetrahydrofuran.     

The Analysis of Fluoride in Geothermal-Geopressured Brines

Abstract

Fluoride ion was determined by means of a fluoride ion selective electrode on geothermal-geopressured brines obtained from the DOW-DOE L. R. Sweezy ^#1 Well. The values decrease from 7.8ppm to a plateau value of 1.6–1.8 ppm.     

Sources and toxicity of fluoride in the environment

Fluoride, a naturally occurring element, exists in combination with other elements as a fluoride compound, and is found naturally in water, foods, soil, and several minerals such as fluorite and fluorapatite. Fluoride normally enters the environment and human body through water, food, industrial exposure, drugs, cosmetics, etc. However, fluoride (F^?) contamination in groundwater has been recognized as a serious problem worldwide. The World Health Organization’s specified tolerance limit of fluoride in drinking water is 1.5 mg/L. Human disease caused by fluoride manifests itself in three forms: dental, skeletal, and non-skeletal fluorosis. Apart from teeth and bones, the interaction and involvement of soft tissues, organs, and other systems of the body with fluoride leads to non-skeletal fluorosis. It leads to many bone diseases, mottling of teeth, and lesions of the endocrine glands, thyroid, liver, kidney, and other organs. Fluoride ion concentration in drinking water can be easily estimated by UV-Vis spectrophotometer. Various defluoridation techniques have been developed to reduce the fluoride content to the desired level including principally membrane and adsorption processes. Biosorption is still one of the most extensively used methods for defluoridation of drinking water due to it being cost-free or low cost and because of its viability.     

Organic electrosynthesis using a fluoride ion mediator

Recent studies on fluoride ion-mediated anodic methoxylation of fluoroalkyl sulfides and sulfur-containing five-membered heterocyclic compounds together with its synthetic applications are summarized in this review. The first example of anodic methoxylation of 2-acyloxy-3,3,3-trifluoropropyl sulfides accompanying with [1,2]-rearrangement of acyloxy group is described. Fluoride ion-mediated anodic intramolecular cyclization of 3,3,3-trifluoropropyl sulfides bearing OH and t-BuCOO groups provides CF₃-containing 1,3-oxathiolane and ethylene carbonate derivatives, respectively. Fluoride ion mediator can be also applied to anodic intramolecular carbon–carbon coupling to form oxindole and 3-oxotetrahydroisoquinoline derivatives.     

1,5-二芳基-3-(2-羟基-4,6-二甲氧基苯基)-2-吡唑啉的合成及氟离子荧光探针行为

设计合成了8个1,5-二芳基-3-(2-羟基-4,6-二甲氧基苯基)-2-吡唑啉化合物4a~4h. 它们的结构经由IR、1H NMR、MS和元素分析确认. 测定了它们的紫外光谱和荧光光谱, 研究了它们对氟离子的选择性识别作用, 发现化合物4a,4c和4d均可选择性地识别氟离子, 其中4a和4c作为识别氟离子的荧光探针, 受常见离子干扰较小, 选择性较高.     

TD‐DFT study on the sensing mechanism of a fluorescent chemosensor for fluoride: Excited‐state proton transfer

An excited‐state proton transfer (ESPT) process, induced by both intermolecular and intramolecular hydrogen‐bonding interactions, is proposed to account for the fluorescence sensing mechanism of a fluoride chemosensor, phenyl‐1H‐anthra(1,2‐d)imidazole‐6,11‐dione. The time‐dependent density functional theory (TD‐DFT) method has been applied to investigate the different electronic states. The present theoretical study of this chemosensor, as well as its anion and fluoride complex, has been conducted with a view to monitoring its structural and photophysical properties. The proton of the chemosensor can shift to fluoride in the ground state but transfers from the proton donor (NH group) to a proton acceptor (neighboring carbonyl group) in the first singlet excited state. This may explain the observed red shifts in the fluorescence spectra in the relevant fluorescent sensing mechanism. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Fluoride removal from water by chitosan derivatives and composites: A review

Fluoride is an essential element, indispensable for maintenance of dental health. Nevertheless, fluoride concentrations in drinking water above 1.5 mg L⁻¹ may be detrimental to human health. Many methods have been developed for removing excessive fluoride from drinking water, adsorption seems to be an effective, environmentally friendly and economical one. Since the sorption capacity of fluoride below 2 mg L⁻¹ on most conventional adsorbents is not satisfactory, much effort has been devoted to develop new and cost-effective fluoride adsorbents. This review reports the recent developments in the F⁻ removal in water treatment, using chitosan derivatives and composites in order to provide useful information about the different technologies. When possibly the adsorption capacity of chitosan derivatives and composites under different experimental conditions is reported to help to compare the efficacy of the fluoride removal process. A comparison with the adsorption capacity of other low cost adsorbents is also tabled.     

Calix[5]phyrin for Fluoride Ion Sensing with Visible and Near Infrared Optical Responses

Fluoride (F⁻) ion sensing is an important topic due to its roles in health, medical, and environmental sciences. In this regard, colorimetric sensors with a near infrared (NIR) optical response are useful in biological systems because they can avoid interference from endogenous chromophores. Although calix[n]phyrins are highly attractive as sensors with the NIR optical response, studies on calix[n]phyrins are still limited owing to their intrinsic instability against ambient light and air. In this study, we report the synthesis and characterization of a new calix[5]phyrin bearing one sp³‐hybridized carbon atom as a π‐expanded calix[n]phyrin. Upon addition of tetrabutylammonium fluoride, the calix[5]phyrin exhibited distinct NIR absorptions at 908 and 1064 nm as well as a visible color change. Importantly, it revealed an excellent selectivity for F⁻ ion. These results demonstrate that calix[5]phyrins are promising colorimetric and NIR sensors of F⁻ ion.     

1,8-萘酰亚胺修饰的卟啉及其作为F-识别化学传感器的研究

合成了新型的具有识别F-能力的1,8-萘酰亚胺修饰的卟啉化合物,在F-的作用下,紫外-可见光谱和荧光光谱都发生明显的变化,而且可以被肉眼识别,该传感器可以作为具有F-选择性的比色和荧光化学传感器。     

A novel fluoride ion colorimetric chemosensor based on coumarin

A novel visible colorimetric sensor (L1) with high selectivity for fluoride ion based on coumarin has been synthesized by a simple modification of our earlier report. The chemosensor L1 shows an obvious color change from yellow to blue upon addition of fluoride ion with a large red shift of 145 nm in acetonitrile, and without interference of other anions such as Cl-, Br-, I-, NO3-, H2PO4-, HSO4-, and AcO-. The investigation of 1H NMR spectrum titration indicates the proposed mechanism is that F- first establishes a hydrogen bonding interaction with L1, and then the formation of [F-H-F]- induces deprotonation.     

Unique hydrogen bonds between 9-anthracenyl hydrogen and anions

Unique hydrogen bonds of the 9-H of anthracene moieties in hosts 1 and 2 with fluoride and pyrophosphate ions were observed on the basis of the (1)H NMR experiments. Furthermore, hosts 1 and 2 act as a colorimetric sensor and a fluorescent chemosensor for the recognition of fluoride ion, respectively.     

Aluminum(III) Porphyrins as Ionophores for Fluoride Selective Polymeric Membrane Electrodes

Aluminum(III) porphyrins are examined as potential fluoride selective ionophores in polymeric membrane type ion‐selective electrodes. Membranes formulated with Al(III) tetraphenyl (TPP) or octaethyl (OEP) porphyrins are shown to exhibit enhanced potentiometric selectivity for fluoride over more lipophilic anions, including perchlorate and thiocyanate. However, such membrane electrodes display undesirable super‐Nernstian behavior, with concomitant slow response and recovery times. By employing a sterically hindered Al(III) picket fence porphyrin (PFP) complex as the membrane active species, fully reversible and Nernstian response toward fluoride is achieved. This finding suggests that the super‐Nernstian behavior observed with the nonpicket fence metalloporphyrins is due to the formation of aggregate porphyrin species (likely dimers) within the membrane phase. The steric hindrance of the PFP ligand structure eliminates such chemistry, thus leading to theoretical response slopes toward fluoride. Addition of lipophilic anionic sites into the organic membranes enhances response and selectivity, indicating that the Al(III) porphyrin ionophores function as charged carrier type ionophores. Optimized membranes formulated with Al(III)‐PFP in an o‐nitrophenyloctyl ether plasticized PVC film exhibit fast response to fluoride down to 40 μM, with very high selectivity over SCN^?, ClO₄^?, Cl^?, Br^? and NO₃^? (k^pot<10^?3 for all anions tested). With further refinements in the membrane chemistry, it is anticipated that Al(III) porphyrin‐based membrane electrodes can exhibit potentiometric fluoride response and selectivity that approaches that of the classical solid‐state LaF₃ crystal‐based fluoride sensor.     

A polymeric sensor for the chromogenic and luminescent detection of anions

A polysiloxane based thiourea coupled sensor has been developed for the determination of anions from changes in the UV-Vis or fluorescence spectra. A comparative account of the photophysical properties of the monomer and polymer units bearing the thiourea moiety revealed better fluoride recognition in the polymeric framework. The fluoride recognition by the polymeric sensor was attributed to co-operative binding involving a DMSO molecule and a fluoride ion between thiourea groups on adjacent residues. The polymeric sensor can measure fluoride at two different concentration ranges by using either absorbance or emission signalling.     

Synthesis of La-incorporated chitosan beads for fluoride removal from water

In this study, lanthanum incorporated chitosan beads (LCB) were synthesized using precipitation method and tested for fluoride removal from drinking water. The effect of various parameters like complexation and precipitation time, lanthanum loading and ammonia strength on fluoride removal have been studied. It is observed that the parameters for the synthesis of LCB have significant influence on development of LCB and in turn on fluoride removal capacity. The optimal condition for synthesis of LCB includes lanthanum loading: 10 wt%, complexation time: 60 min, precipitation time: 60 min, drying temperature: 75 °C for 72 h. The maximum fluoride adsorption capacity of LCB was found to be 4.7 mg/g and negligible release of lanthanum ion was observed. XRD analysis shows the presence of lanthanum hydroxide and amorphous nature of LCB. SEM of LCB shows the presence of oval lanthanum hydroxide particles spread over the chitosan matrix. Fluoride adsorption capacity has been calculated by applying Langmuir and Freundlich isotherms. The comparative study suggests that LCB shows four times greater fluoride adsorption capacity than the commercially used activated alumina.