以1,3-茚二酮为电子受体的热激活延迟荧光分子的合成及其在有机发光二极管中的应用

本文设计合成了一种新型电子受体2,2-二甲基-1,3-茚二酮,并将其应用于热激活延迟荧光(TADF)分子的设计中,合成了一系列具有不同发光性能的TADF分子:5-二甲基吖啶基-2,2-二甲基-1,3-茚二酮(IDYD),5-吩噁嗪基-2,2-二甲基-1,3-茚二酮(IDPXZ)和5,6-二吩噁嗪基-2,2-二甲基-1,3-茚二酮(ID2PXZ)。以IDYD为客体掺杂制备得到蓝光OLED器件,其CIE值为(0.27,0.31),最大外量子效率(EQE)为2.13%。以IDPXZ为客体掺杂得到橙光OLED器件,其CIE值为(0.43,0.53),EQE为1.31%。以ID2PXZ为客体掺杂得到黄光OLED器件,其CIE值为(0.41,0.54),EQE为2.55%。上述结果证明了以2,2-二甲基-1,3-茚二酮为电子受体可以得到不同发光颜色的TADF分子,并在全色OLED器件中具有一定应用前景。     

一种热活化延迟荧光黄光材料的合成、性能及高效率电致发光器件

利用吩噁嗪和嘧啶分别作为电子给体和电子受体，通过Buchwald-Hartwig和Suzuki偶联反应成功合成了一种热活化延迟荧光黄光材料pPBPXZ.密度泛函理论计算显示，pPBPXZ分子中吩噁嗪和嘧啶结构单元间的二面角接近90°，而两个嘧啶结构单元与连接二者的苯环间的二面角接近0°；pPBPXZ的最高电子占据轨道主要分布在吩噁嗪结构单元上，最低电子未占轨道主要分布在嘧啶环和苯环上，两种分子轨道只有很小部分重叠.循环伏安、热重和差热测试表明，pPBPXZ具有高的电化学稳定性和热稳定性.在甲苯溶液中，pPBPXZ在360~495 nm显示出了明显的分子内电荷转移跃迁吸收，室温发光峰出现在535 nm.根据低温（77 K）荧光和磷光光谱，计算得到pPBPXZ的最低激发单重态和最低激发三重态能级分别为2.57 eV和2.48 eV，能级差（△E_ST）仅为0.09 eV.利用pPBPXZ作为发光层客体掺杂材料，制备出了高效率的黄光电致发光器件.器件的发射峰出现在552~560 nm，最大电流效率、功率效率和外量子效率分别达到了49.9 cd/A、49.0 lm/W和15.7%，而且发光效率受pPBPXZ掺杂浓度影响较小.     

Design Approach of Lifetime Extending Thermally Activated Delayed Fluorescence Sensitizers for Highly Efficient Fluorescence Devices

In this work, a design approach of three thermally activated delayed fluorescence (TADF) emitters to extend the device lifetime of the TADF sensitized fluorescent devices was studied. Three TADF materials, 5-{4,6-bis[4-(tert-butyl)phenyl]-1,3,5-triazin-2-yl}-2-(10,15-diphenyl-10,15-dihydro-5H-diindolo[3,2-a:3′,2′-c]carbazol-5-yl)benzonitrile (tTCNTruX), 4-[3-cyano-4-(10,15-diphenyl-10,15-dihydro-5H-diindolo[3,2-a:3′,2′-c]carbazol-5-yl)phenyl]-2,6-diphenylpyrimidine-5-carbonitrile (PCNTruX) and 4-(4-{10,15-bis[4-(tert-butyl)phenyl]-10,15-dihydro-5H-diindolo[3,2-a:3′,2′-c]carbazol-5-yl}-3-cyanophenyl)-2,6-diphenylpyrimidine-5-carbonitrile (PCNtTruX), were synthesized as sensitizers for TADF-sensitized fluorescent organic light-emitting diodes. The two tTCNTruX and PCNtTruX TADF emitters were designed to have Dexter energy transfer with blocking groups either in the donor or acceptor unit of the donor–acceptor-type TADF sensitizer. The TADF materials showed small singlet–triplet energy splitting and a high reverse intersystem crossing (RISC) rate for effective sensitization of the fluorescent emission of the fluorescent emitter. tTCNTruX- and PCNtTruX-sensitized fluorescent devices showed maximum external quantum efficiencies (EQEs) of 17.7 % and 11.5 % in the yellow and red devices, respectively, which were higher than those of TADF-sensitized devices with the corresponding TADF sensitizer without a blocking group. Moreover, the device lifetime was also extended by employing the tTCNTruX and PCNtTruX sensitizers. This work demonstrated that the tTCNTruX and PCNtTruX sensitizers are effective to improve the maximum EQE and device lifetime of TADF-sensitized fluorescent devices.     

Phenoxazine-Dibenzothiophene Sulfoximine Emitters Featuring Both Thermally Activated Delayed Fluorescence and Aggregation Induced Emission

In this work, we demonstrate dibenzothiophene sulfoximine derivatives as building blocks for constructing emitters featuring both thermally activated delayed fluorescent (TADF) and aggregation-induced emission (AIE) properties, with multiple advantages including high chemical and thermal stability, facile functionalization, as well as tunable electron-accepting ability. A series of phenoxazine-dibenzothiophene sulfoximine structured TADF emitters were successfully synthesized and their photophysical and electroluminescent properties were evaluated. The electroluminescence devices based on these emitters displayed diverse emissions from yellow to orange and reached external quantum efficiencies (EQEs) of 5.8% with 16.7% efficiency roll-off at a high brightness of 1000 cd·m⁻².     

Highly Effective Thermally Activated Delayed Fluorescence Emitters Based on Symmetry and Asymmetry Nicotinonitrile Derivatives

In this study, we developed two thermally activated delayed fluorescence (TADF) emitters, ICzCN and ICzCYP, to apply to organic light-emitting diodes (OLEDs). These emitters involve indolocarbazole (ICz) donor units and nicotinonitrile acceptor units with a twisted donor-acceptor-donor (D-A-D) structure for small singlet (S₁) and triplet (T₁) state energy gap (ΔE_ST) to enable efficient exciton transfer from the T₁ to the S₁ state. Depending on the position of the cyano-substituent, ICzCN has a symmetric structure by introducing donor units at the 3,5-position of isonicotinonitrile, and ICzCYP has an asymmetric structure by introducing donor units at the 2,6-position of nicotinonitrile. These emitters have different properties, such as the maximum luminance (L_max) value. The L_max of ICzCN reached over 10000 cd m⁻². The external quantum efficiency (η_ext) was 14.8% for ICzCN and 14.9% for ICzCYP, and both achieved a low turn-on voltage (V_on) of less than 3.4 eV.     

Quinoxaline and Pyrido[x,y-b]pyrazine-Based Emitters: Tuning Normal Fluorescence to Thermally Activated Delayed Fluorescence and Emitting Color over the Entire Visible-Light Range

Quinoxaline (Q), pyrido[2,3-b]pyrazine (PP) and pyrido[3,4-b]pyrazine (iPP) are used as electron acceptors (A) to design a series of D–π–A-type light-emitting materials with different donor (D) groups. By adjusting the molecular torsion angles through changing D from carbazole (Cz) to 10-dimethylacridine (DMAC) or 10H-phenoxazine (PXZ) for a fixed A, the luminescence is tuned from normal fluorescence to thermally activated delayed fluorescence (TADF). By gradually enhancing the intramolecular charge-transfer extent through combining different D and A, the emission color is continuously and regularly tuned from pure blue to orange–red. Organic light-emitting diodes (OLEDs) containing these compounds as doped emitters exhibit bright electroluminescence with emission colors covering the entire visible-light range. An external quantum efficiency (η_ext) of 1.2 % with excellent color coordinates of (0.16, 0.07) is obtained for the pure-blue OLED of Q-Cz. High η_ext values of 12.9 (35.9) to 16.7 % (51.9 cd A⁻¹) are realized in the green, yellow, and orange–red TADF OLEDs. All PP- and iPP-based TADF emitters exhibit superior efficiency stabilities to that of analogues of Q. This provides a practical strategy to tune the emission color of Q, PP, and iPP derivatives with the same molecular skeletons over the entire visible-light range.     

High Performance Thermally Activated Delayed Fluorescence Sensitized Organic Light‐Emitting Diodes

Recently, organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) materials have aroused huge attention in both academia and industry. Compared with fluorescent and phosphorescent materials, TADF materials can theoretically capture 100 % excitons without incorporating noble metals, making them effective emitters and hosts for OLEDs simultaneously. Here, in this review, our recent works on mechanisms and materials of high performance TADF‐sensitized phosphorescent (TSP) OLEDs, TADF‐sensitized fluorescent (TSF) OLEDs and TADF‐sensitized TADF (TST) OLEDs are summarized. Finally, we propose the outlook for the further development and application of TADF‐sensitized OLEDs.     

Asymmetric Host Molecule Bearing Pyridine Core for Highly Efficient Blue Thermally Activated Delayed Fluorescence OLEDs

In this study, two host materials, pCzBzbCz and pCzPybCz , are synthesized to achieve a high efficiency and long lifetime of blue thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs). The molecular design strategy involves the introduction of a pyridine group into the core structure of pCzPybCz as an electron-withdrawing unit, and an electron-donating phenyl group into the structure of pCzBzbCz . These host materials demonstrate good thermal stability and high triplet energy (T₁=3.07 eV for pCzBzbCz and 3.06 eV for pCzPybCz ) for the fabrication of blue TADF-OLEDs. In particular, pCzPybCz -based OLED devices demonstrate an external quantum efficiency (EQE) of 22.7 % and an operational lifetime of 24 h (LT₉₀, time to attain 90 % of initial luminance) at an initial luminance of 1000 cd m⁻². This superior lifetime could be explained by the C−N bond dissociation energy (BDE) in the host molecular structure. Furthermore, a mixed-host system using the electron-deficient 2,4-bis(dibenzo[b,d]furan-2-yl)-6-phenyl-1,3,5-triazine (DDBFT) is proposed to inhibit the formation of the anion state of our host materials. In short, the device operational lifetime is further improved by applying DDBFT. The carbazole-based asymmetric host molecule containing a pyridine core realizes a high-efficiency blue TADF-OLED showing a positive effect on the operating lifetime, and can provide useful strategies for designing new host materials.     

Molecular Engineering of Isomeric Benzofurocarbazole Donors for Photophysical Management of Thermally Activated Delayed Fluorescence Emitters

Benzofurocarbazole moieties are commonly used donor structures in the design of thermally activated delayed fluorescence (TADF) emitters. However, only 5 H-benzofuro[3,2-c]carbazole (34BFCz) has been reported and, to the best of our knowledge, no other benzofurocarbazole derivatives have been covered in the literature. In the present study, two further benzofurocarbazole moieties, 12 H-benzofuro[3,2-a]carbazole (12BFCz) and 7 H-benzofuro[2,3-b]carbazole (23BFCz), have been synthesized to investigate the effect of the donor structure on the photophysics and device parameters of TADF emitters. Two benzofurocarbazole-derived TADF emitters, 12-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-12 H-benzofuro[3,2-a]carbazole (o12BFCzTrz) and 7-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-7 H-benzofuro[2,3-b]carbazole (o23BFCzTrz), have been compared with 5-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-5 H-benzofuro[3,2-c]carbazole (oBFCzTrz). The benzofurocarbazole donor structure governs the TADF characteristics, such as charge-transfer property and emission color. The 12BFCz donor has proved to be effective in blue-shifting the emission color, and 34BFCz has proven useful for improving the external quantum efficiency (EQE). The 12BFCz-derived o12BFCzTrz showed blue-shifted color coordinates of (0.159, 0.288), compared to (0.178, 0388) for o23BFCzTrz and (0.169, 0.341) for oBFCzTrz. The 34BFCz-derived oBFCzTrz exhibited an EQE of 22.9 %, compared to 19.2 % for o12BFCzTrz and 21.1 % for o23BFCzTrz.     

高效溶液法制备延迟荧光电致发光器件研究

本文以2-[对-N,N-二苯基氨基-苯基]-S-二氧硫杂蒽酮(TXO-TPA)为发光材料, 4,4',4"-三(9-咔唑基)三苯胺(TCTA) 为主体材料, 通过溶液法与真空蒸镀相结合的工艺,制备了高效延迟荧光型电致发光器件。为了考察不同电子传输材料对器件性能的影响,分别选取TmPyPB、TPBI、BCP、Alq₃作为电子传输层制备器件,并对器件的性能进行系统的研究。结果表明:由于1,3,5-三(1-苯基-1H-苯并咪唑-2-基)苯(TPBI)具有合适的HOMO/LUMO能级、高的电子迁移率以及高的三重态能级,利于电子的传输和激子的阻挡,以其为电子传输层的器件显示出最佳的性能,器件的开启电压低至3.6 V,电流效率达到16.2 cd/A,最大的EQE达到5.97%。     

CN-Modified Imidazopyridine as a New Electron Accepting Unit of Thermally Activated Delayed Fluorescent Emitters

Two efficient thermally activated delayed fluorescent (TADF) emitters were developed by utilizing CN-modified imidazopyridine as an acceptor unit. The CN-modified imidazopyridine acceptor was combined with either an acridine donor or a phenoxazine donor through a phenyl linker to produce two TADF emitters, Ac-CNImPy and PXZ-CNImPy. The acridine-based Ac-CNImPy emitter exhibited sky-blue emission with a CIE coordinate of (0.18, 0.38), whereas the phenoxazine-donor-based PXZ-CNImPy showed greenish-yellow emission with a CIE coordinate of (0.32, 0.58). A high photoluminescence quantum yield of 80 % was observed for the PXZ-CNImPy emitter compared with 40 % for the Ac-CNImPy emitter. Organic light-emitting diodes based on the PXZ-CNImPy emitter demonstrated high external quantum efficiency of 17.0 %. Hence, the CN-modified imidazopyridine unit can be considered as a useful electron acceptor for the future design of highly efficient TADF emitters.     

Aromatic-Imide-Based Thermally Activated Delayed Fluorescence Materials for Highly Efficient Organic Light-Emitting Diodes

Aromatic-imide-based thermally activated delayed fluorescence (TADF) materials with a twisted donor–acceptor–donor skeleton were efficiently synthesized and exhibited excellent thermal stability and high photoluminescence quantum yields. The small ΔE_ST value (<0.1 eV) along with the clear temperature-dependent delayed component of their transient photoluminescence (PL) spectra demonstrated their excellent TADF properties. Moreover, the performance of organic light-emitting diodes in which TADF materials AI-Cz and AI-TBCz were used as dopants were outstanding, with external quantum efficiencies up to 23.2 and 21.1 %, respectively.     

Neoteric Advances in Oxygen Bridged Triaryl Boron-based Delayed Fluorescent Materials for Organic Light Emitting Diodes

Since their first demonstration, thermally activated delayed fluorescence (TADF) materials have been emerged as the most promising emitters because of their promising applications in optoelectronics, typified by organic light-emitting diodes (OLEDs). In which, the rigid oxygen bridged boron acceptor-featured ( DOBNA ) emitters have gained tremendous impetus for OLEDs, which is ascribed to their excellent external quantum efficiency (EQE). However, these materials often displayed severe efficiency roll-off and poor operational stability. Therefore, there needs to be a comprehensive understanding of the aspect of the molecular design and structure-property relationship. To the best of our knowledge, there is no detailed review on the structure-function outlook of DOBNA -based emitters emphasizing the effect of the nature of donor units, their number density, and substitution pattern on the physicochemical properties, excited state dynamics and OLED performance were reported. To fill this gap, herein we presented the recent advancements in DOBNA -based acceptor featured TADF materials by classifying them into several subgroups based on the molecular design i. e. donor-acceptor (D−A), D−A-D, A−D-A, and multi-resonant TADF (MR-TADF) emitters. The detailed design concepts, along with their respective physicochemical and OLED performances were summarized. Finally, the prospective of this class of materials in forthcoming OLED displays is also discussed.     

Asymmetric Spirobiacridine-based Delayed Fluorescence Emitters for High-performance Organic Light-Emitting Devices

Recently, researchers have focused on thermally activated delayed fluorescence (TADF) for efficient future lighting and displays. Among TADF emitters, a combination of triazine and acridine is a promising candidate for realizing high-efficiency organic light-emitting devices (OLEDs). However, simultaneous development of perfect horizontal orientation (Θ=100 %) and an external quantum efficiency (EQE) of over 40 % is still challenging. Here, to obtain insights for further improvements of a triazine/acridine combination, various asymmetric spirobiacridine (SBA)-based TADF emitters with a unity photoluminescence quantum yield and high Θ ratio of over 80 % were developed. Furthermore, the substitution effects of the triazine acceptor unit on the photophysical properties were studied, including molecular orientations and OLED performance. The corresponding OLED exhibited sky-blue emission with a high EQE of over 30 %.     

基于给-受体结构的热活化延迟荧光材料

热活化延迟荧光（TADF）材料由于第一单线态（S₁）与三线态激发态（T₁）之间的能级差较小,使得三线态激子能够有效地系间窜越至单线态发光,实现100%的激子利用率,在有机发光二极管（OLED）等领域得到广泛应用,是目前有机电子学研究的热点之一。基于给-受体（D-A）结构构建TADF材料具有分子设计简便、易于制备、性能优异等特点,引起了人们的普遍关注。本文综述了基于D-A结构设计TADF材料的基本原则,依据给受体构筑单元的不同,概括了各类TADF材料的结构和性能特点以及在器件应用等方面的最新研究进展,最后总结了D-A结构型TADF材料尚存在的问题,并对其未来的关键研究方向进行了分析和展望。     

Highly Efficient Near‐Infrared Delayed Fluorescence Organic Light Emitting Diodes Using a Phenanthrene‐Based Charge‐Transfer Compound

Significant efforts have been made to develop high‐efficiency organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) emitters with blue, green, yellow, and orange–red colors. However, efficient TADF materials with colors ranging from red, to deep‐red, to near‐infrared (NIR) have been rarely reported owing to the difficulty in molecular design. Herein, we report the first NIR TADF molecule TPA‐DCPP (TPA=triphenylamine; DCPP=2,3‐dicyanopyrazino phenanthrene) which has a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Its nondoped OLED device exhibits a maximum external quantum efficiency (EQE) of 2.1 % with a Commission International de L′Éclairage (CIE) coordinate of (0.70, 0.29). Moreover, an extremely high EQE of nearly 10 % with an emission band at λ=668 nm has been achieved in the doped device, which is comparable to the most‐efficient deep‐red/NIR phosphorescent OLEDs with similar electroluminescent spectra.     

Molecular and Device Design Strategies for Ideal Performance White Organic Light‐Emitting Diodes

The progress of white organic light‐emitting diodes (WOLEDs) via adopting fluorescent and phosphorescent organic materials have attracted commercial interest for their broad range of visible spectrum and potential of 100 % internal quantum efficiency. In this account, smart molecular designs for developing efficient phosphorescent host and good color purity blue fluorescent emitters are prepared to be discussed, especially donor‐acceptor modification to regulate their triplet states and bipolar transport properties. Rational device configuration design strategies were also introduced by cooperating with efficient conventional fluorescent and thermally activated delayed fluorescent emitting molecules to achieve full exciton utilization and simplified device structures, further suggesting perspectives of potentially low‐cost, ideal performance and promoted operational lifetime in WOLED devices.     

高分子热活化延迟荧光材料研究进展

高分子热活化延迟荧光材料能够利用热活化的反向系间窜越过程将三线态激子转变为单线态激子而发出荧光,理论上可以实现100%的内量子效率,突破了传统高分子荧光材料内量子效率不超过25%的极限,因而代表了未来低成本高效率高分子发光材料的发展方向。 近年来,高分子热活化延迟荧光材料在分子设计方面取得了重要进展,形成了主链型、侧链型和树枝状高分子热活化延迟荧光材料等材料体系,同时其器件性能得到了大幅提升,部分材料的器件效率达到了高分子磷光材料的水平。 本文从材料和器件两个方面,围绕高分子热活化延迟荧光材料的分子结构、光物理特性和器件性能,总结和评述了国内外研究者在该领域方向的研究进展,并分析了未来发展面临的机遇和挑战。     

Peripheral Amplification of Multi‐Resonance Induced Thermally Activated Delayed Fluorescence for Highly Efficient OLEDs

Multi‐resonance induced by boron and nitrogen atoms in opposite resonance positions endows a thermally activated delayed fluorescence (MR‐TADF) emitter with a strikingly small full width at half maximum of only 26 nm and excellent photoluminescence quantum yield of up to 97.48 %. The introduction of a carbazole unit in the para position of the B‐substituted phenyl‐ring can significantly boost up the resonance effect without compromising the color fidelity, subsequently enhancing the performances of the corresponding pure blue TADF‐OLED, with an outstanding external quantum efficiency (EQE) up to 32.1 % and low efficiency roll‐off, making it one of the best TADF‐OLEDs in the blue region to date. Furthermore, utilizing this material as host for a yellow phosphorescent emitter, the device also shows a significantly reduced turn‐on voltage of 3.2 V and an EQE_max of 22.2 %.     

Intermolecular Charge‐Transfer Transition Emitter Showing Thermally Activated Delayed Fluorescence for Efficient Non‐Doped OLEDs

A novel molecular model of connecting electron‐donating (D) and electron‐withdrawing (A) moieties via a space‐enough and conjugation‐forbidden linkage (D‐Spacer‐A) is proposed to develop efficient non‐doped thermally activated delayed fluorescence (TADF) emitters. 10‐(4‐(4‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl) phenoxy) phenyl)‐9,9‐dimethyl‐9,10‐dihydroacridine (DMAC‐o‐TRZ) was designed and synthesized accordingly. As expected, it exhibits local excited properties in single‐molecule state as D‐Spacer‐A molecular backbone strongly suppress the intramolecular charge‐transfer (CT) transition. And intermolecular CT transition acted as the vital radiation channel for neat DMAC‐o‐TRZ film. As in return, the non‐doped device exhibits a remarkable maximum external quantum efficiency (EQE) of 14.7 %. These results prove the feasibility of D‐Spacer‐A molecules to develop intermolecular CT transition TADF emitters for efficient non‐doped OLEDs.