The intercalation of cetyltrimethylammonium cations into muscovite by a two-step process: I. The ion exchange of the interlayer cations in muscovite with Li

A new method to prepare alkylammonium ions-intercalated muscovite is reported. It has been obtained in a two-step process: the first step is the inorganic ion exchange, which allows the ion exchange of interlayer cations in muscovite with Li⁺ in a melting condition of LiNO₃. It was found that in the LiNO₃ treatment process most of the interlayer cations were replaced by Li⁺, and a large amount of water entered the interlayer space of muscovite. Therefore the spacing of muscovite (001) plane d₍₀₀₁₎ was enlarged from 19.92 to 24.16 Å, which could allow for the intercalation of organic cations. SEM shows that the LiNO₃ treatments have little effect on the size of muscovite platelets. TEM and FTIR confirm that not only the chemical composition but also the structure of the aluminosilicate layer has not been changed by the LiNO₃ treatments.     

Rearrangement of cationic surfactants in magadiite

Partly loaded magadiite samples have been prepared from a synthetic sodium magadiite, 0.9 Na₂O · 13.9 SiO₂ · 9.3 H₂O, by a two-step intercalation process using n-cetylpyridinium (CP) chloride as a model surfactant. Usually, partly loading with long-chain organic cations yields a non-uniform distribution of the surfactant molecules in the interlamellar space of the layered silicates. The resulting samples contain fully expanded crystals or zones within the crystals besides unreacted crystals or domains. After equilibration in water the partly loaded samples transform into products with a uniform expansion of all interlayer spaces due to rearrangement of the CP cations within and between the interlayer spaces. Received: 10 June 1998 Accepted in revised form: 5 November 1998     

The intercalation of cetyltrimethylammonium cations into muscovite by a two-step process: II. The intercalation of cetyltrimethylammonium cations into Li-muscovite

The alkylammonium cations were successively intercalated into the interlayer of muscovite. It was achieved by inorganic-organic ion exchange in the hydrothermal reaction of the LiNO₃-treated muscovite with cetyltrimethylammonium bromide solution. One-dimensional Patterson plots and electron density calculations show that hydrated Li⁺ and CTA⁺ cations entered the interlayer of muscovite successively. The CTA⁺-intercalated muscovite was characterized by powder X-ray diffraction and elemental analysis, in conjunction with FTIR, nuclear magnetic resonance, X-ray photoelectron spectra, high-resolution transmission electron microscopy, etc. The experiments show that organo-muscovite composite with ordered structure has been obtained. The CTA⁺ headgroups are distributed in the interlayer uniformly. However, the arrangement and conformation of CTA⁺ chains are strongly dependent upon the reaction temperature. At lower reaction temperature, the chains of CTA⁺ ions adopt a little more disordered arrangement and have higher gauche/trans conformer ratio, resulting in the disturbance to the interlayer symmetry. Whereas at higher reaction temperature, the sample with paraffin-like arrangement of CTA⁺ chains could be obtained, in which the methylene chains of CTA⁺ adopt a fully stretched, all-trans conformation.     

高分子-无机夹层化合物的合成、结构和性能

由高分子和插入无机层状固体层间形成的夹层化合物是近年发展起来的一类具有诱人前景的新型功能材料,在许多领域具有广的前景。本文对这夹层化合的合成、结构、性能及应用前景等方面的研究进展进行了评述。     

Formation of hydrotalcite in aqueous solutions and intercalation of ATP by anion exchange

The formation reaction and the intercalation of adenosine triphosphate (ATP) were studied for hydrotalcite (HT), a layered double hydroxide (LDH) of magnesium and aluminum. Hydrotalcite with nitrate ions in the interlayer (HT-NO(3)) was formed (A) by dropwise addition of a solution of magnesium and aluminum nitrates (pH ca. 3) to a sodium hydroxide solution (pH ca. 14) until the pH decreased from 14 to 10 and (B) by dropwise addition of the NaOH solution to the solution of magnesium and aluminum nitrates with pH increasing from 3 to 10. The precipitate obtained with method B was contaminated with aluminum hydroxide and the crystallinity of the product was low, possibly because aluminum hydroxide precipitates at pH 4 or 5 and remains even after HT-NO(3) forms at pH above 8. With method A, however, the precipitate was pure HT-NO(3) with increased crystallinity, since the solubility of aluminum hydroxide at pH above and around 10 is high as dissolved aluminate anions are stable in this high pH region, and there was no aluminum hydroxide contamination. The formed HT-NO(3) had a composition of [Mg(0.71)Al(0.29)(OH)(2)](NO(3))(0.29).0.58H(2)O. To intercalate ATP anions into the HT-NO(3), HT-NO(3) was dispersed in an ATP solution at pH 7. It was found that the interlayer nitrate ions were completely exchanged with ATP anions by ion exchange, and the interlayer distance expanded almost twice with a free space distance of 1.2 nm. The composition of HT-ATP was established as [Mg(0.68)Al(0.32)(OH)(2)](ATP)(0.080)0.88H(2)O. The increased distance could be explained with a calculated molecular configuration of the ATP as follows: An ATP molecule is bound to an interlayer surface with the triphosphate group, the adenosine group bends owing to its bond angles and projects into the interlayer to a height of 1 nm, and the adenosine groups aligned in the interlayer support the interlayer distance.     

A new approach for the synthesis of layered niobium sulfide and restacking route of NbS2 nanosheet

We have developed a new process for the synthesis of a layered niobium sulfide that involves heating K₄Nb₆O₁₇·3H₂O with a H₂S/N₂ gas mixture. It was confirmed that heating the starting layered oxide at 750 °C for 10 h under the gas flow yielded a highly crystalline, single-phase K_0.34(H₂O)_0.7NbS₂. The layered sulfide slabs had a large plate-like shape. Potassium ions in the interlayer of K_0.34(H₂O)_0.7NbS₂ could be exchanged with protons by stirring in 2 M H₂SO₄. It was found that the proton in the proton-exchanged form can be easily exchanged with other cations. The proton-exchanged form was exfoliated into NbS₂ nanosheets by ultrasonication in water. According to the atomic force microscopy (AFM) images, NbS₂ nanosheets had a thickness of around 4 Å, which roughly corresponded to the thickness of a single NbS₂ host layer. NbS₂ nanosheets could be restacked with the intercalation of Eu³⁺ or tetrabutylammonium ions by an electrostatic self-assembly deposition (ESD) technique.     

聚合物／层状硅酸盐纳米复合材料研究进展

聚合物／层状硅酸盐（ＰＬＳ）纳米复合材料是近１０年迅速发展起来的研究交叉科学。由于聚合物纳米复合材料具有常规聚合物复合材料所没有的结构、形态以及较常规聚合物复合材料更优异的物理力学性能、耐热性和气体液体阻隔性能等,因而显示出重要的科学意义和应用前景。本文综述了聚合物／层状硅酸盐纳米复合材料的制备,结构表征和物理力学性能,对制务过程进行了热力学和动力学分析,最后对其应用前景进行了展望。     

Reversible Ammonium Ion Intercalation/de-intercalation with Crystal Water Promotion Effect in Layered VOPO4⋅2 H2O**

The non-metal NH₄⁺ carrier has attracted tremendous interests for aqueous energy storage owing to its light molar mass and fast diffusion in aqueous electrolytes. Previous study inferred that NH₄⁺ ion storage in layered VOPO₄⋅2 H₂O is impossible due to the removal of NH₄⁺ from NH₄VOPO₄ leads to a phase change inevitably. Herein, we update this cognition and demonstrated highly reversible intercalation/de-intercalation behavior of NH₄⁺ in layered VOPO₄⋅2 H₂O host. Satisfactory specific capacity of 154.6 mAh g⁻¹ at 0.1 A g⁻¹ and very stable discharge potential plateau at 0.4 V based on reference electrode was achieved in VOPO₄⋅2 H₂O. A rocking-chair ammonium-ion full cell with the VOPO₄⋅2 H₂O//2.0 M NH₄OTf//PTCDI configuration exhibited a specific capacity of 55 mAh g⁻¹, an average operating voltage of about 1.0 V and excellent long-term cycling stability over 500 cycles with a coulombic efficiency of ≈99 %. Theoretical DFT calculations suggest a unique crystal water substitution process by ammonium ion during the intercalation process. Our results provide new insight into the intercalation/de-intercalation of NH₄⁺ ions in layered hydrated phosphates through crystal water enhancement effect.     

Precipitation synthesis of lanthanide hydroxynitrate anion exchange materials, Ln2(OH)5NO3·H2O (Ln=Y, Eu-Er)

Layered lanthanide hydroxynitrate anion exchange host lattices have been prepared via a room temperature precipitation synthesis. These materials have the composition Ln₂(OH)₅NO₃·H₂O and are formed for Y and the lanthanides from Eu to Er and as such include the first Eu containing nitrate anion exchange host lattice. The interlayer separation of these materials, approximately 8.5 Å, is lower than in the related phases Ln₂(OH)₅NO₃·1.5H₂O which have a corresponding value of 9.1 Å and is consistent with the reduction in the co-intercalated water content of these materials. These new intercalation hosts have been shown to undergo facile anion exchange reactions with a wide range of organic carboxylate and sulfonate anions. These reactions produce phases with up to three times the interlayer separation of the host lattice demonstrating the flexibility of these materials.     

Tungstocobaltate-pillared layered double hydroxides: Preparation, characterization, magnetic and catalytic properties

A new polyoxometalate anion-pillared layered double hydroxide (LDH) was prepared by aqueous ion exchange of a Mg-Al LDH precursor in nitrate form with the tungstocobaltate anions [CoW₁₂O₄₀]⁵⁻. The physicochemical properties of the product were characterized by the methods of powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermogravimetric analysis and cyclic voltammetry. It was confirmed that [CoW₁₂O₄₀]⁵⁻ was intercalated between the brucite-type layers of the LDHs without a change in the structure. Magnetic measurement shows the occurrence of antiferromagnetic interactions between the magnetic centers. The investigation of catalytic performance for this sample exhibits high activity for the oxidation of benzaldehyde by hydrogen peroxide.     

Reversible intercalation of ammonia molecules into a layered double hydroxide structure without exchanging nitrate counter-ions

A zinc/aluminum LDH was precipitated with recycled ammonia from a chemical vapor deposition reaction. The LDH presented a crystalline phase with basal distance of 8.9 Å, typical for nitrate-containing LDHs, and another phase with a basal distance of 13.9 Å. Thermal treatment at 150 °C eliminated the phase with the bigger basal distance leaving only the anhydrous nitrate-intercalated LDH structure with 8.9 Å. Intense N-H stretching modes in the FTIR spectra suggested that the expansion was due to intercalation of ammonia in the form of [NH₄(NH₃)_n]⁺ species. When additional samples were precipitated with pure ammonia, the conventional LDH nitrate structure was obtained (8.9 Å basal distance) at pH=7, as well as a pure crystalline phase with 13.9 Å basal distance at pH=10 due to ammonia intercalation that can be removed by heating at 150 °C or by stirring in acetone, confirming a unusual sensu stricto intercalation process into a LDH without exchanging nitrate ions.     

Neutron diffraction study on protonated and hydrated layered perovskite

A layered perovskite compound with Na⁺, D₃O⁺ ions (H₃O⁺) and D₂O molecules (H₂O) in the interlayer, D_xNa_1−xLaTiO₄·yD₂O, has been prepared by an ion-exchange/intercalation reaction with dilute DCl solution, using an n=1 Ruddlesden-Popper phase, NaLaTiO₄. Its structure has been analyzed in order to clarify the interlayer structure by Rietveld method, using powder neutron diffraction data. The structure analysis revealed that the layered structure changed from the space group P4/nmm-I4/mmm after the ion-exchange/intercalation reaction, and it induced the transformation of perovskite layers from staggered to an eclipsed configuration. The D₂O molecules and D₃O⁺ ions loaded in the interlayer statistically occupied the sites around a body center position of rectangular space surrounded by eight apical O atoms of TiO₆ octahedra in upper and lower layers.