Non-Covalent Interactions between Polyvinyl Chloride and Conjugated Polymers Enable Excellent Mechanical Properties and High Stability in Organic Solar Cells

The incorporation of insulating polymers into conjugated polymers has been widely explored as a strategy to improve mechanical properties of flexible organic electronics. However, phase separation due to the immiscibility of these polymers has limited their effectiveness. In this study, we report the discovery of multiple non-covalent interactions that enhances the miscibility between insulating and conjugated polymers, resulting in improved mechanical properties. Specifically, we have added polyvinyl chloride (PVC) into the conjugated polymer PM6 and observed a significant increase in solution viscosity, indicative of favorable miscibility between these two polymers. This phenomenon has been rarely observed in other insulating/conjugated polymer composites. Thin films of PM6/PVC exhibit a much-improved crack-onset strain of 19.35 %, compared to 10.12 % for pristine PM6 films. Analysis reveal that a “cyclohexyl-like” structure formed through dipole-dipole interactions and hydrogen bonding between PVC and PM6 acted as a cross-linking site in the thin films, leading to improved mechanical properties. Moreover, PM6/PVC blend films have demonstrated excellent thermal and bending stability when applied as an electron donor in organic solar cells. These findings provide new insights into non-covalent interactions that can be utilized to enhance the properties of conjugated polymers and may have potential applications in flexible organic electronics.     

聚合物本体异质结型太阳能电池研究进展

聚合物本体异质结型太阳能电池是一种基于电子给体 /受体混合物薄膜的高效率有机光伏器件。文中介绍了近年来聚合物本体异质结型太阳能电池的最新研究进展 ,指出了目前存在的问题和今后的发展方向     

P-type Polymers in Semitransparent Organic Photovoltaics

P-type polymers are polymeric semiconducting materials that conduct holes and have extensive applications in optoelectronics such as organic photovoltaics. Taking the advantage of intrinsic discontinuous light absorption of organic semiconductors, semitransparent organic photovoltaics (STOPVs) present compelling opportunities in various potential applications such as building-integrated photovoltaics, agrivoltaics, automobiles, and wearable electronics. The characteristics of p-type polymers, including optical, electronic, and morphological properties, determine the performance of STOPVs, and the requirements for p-type polymers differ between opaque organic photovoltaics and STOPVs. Hence, in this Minireview, recent advances of p-type polymers used in STOPVs are systematically summarized, with emphasis on the effects of chemical structures, conformation structures, and aggregation structures of p-type polymers on the performance of STOPVs. Furthermore, new design concepts and guidelines are also proposed for p-type polymers to facilitate the future development of high-performance STOPVs.     

Diazabicyclic Electroactive Ionenes for Efficient and Stable Organic Solar Cells

Electroactive ionenes combining caged-shaped diazabicyclic cations and aromatic diimides were developed as interlayers in organic solar cells (OSCs). These ionenes reduce the work-function of air-stable metal electrodes (e.g., Ag, Cu and Au) by generating strong interfacial dipoles, and their optoelectronic and morphological characters can be modulated by aromatic diimides, leading to high conductivity and good compatibility with active layers. The optimal ionene exhibits superior charge-transport, desirable crystallinity, and weak visible-absorption, boosting the efficiency of benchmark PM6 : Y6-based OSCs up to 17.44 %. The corresponding normal devices show excellent stability at maximum power point test under one sun illumination for 1000 h. Replacing Y6 with L8-BO promotes the efficiency to 18.43 %, one of the highest in binary OSCs. Notably, high efficiencies >16 % are maintained as the interlayer thickness increasing to 105 nm, the best result with interlayer-thickness over 100 nm.     

Conjugated Nanohoop Polymers based on Antiaromatic Dibenzopentalenes for Charge Storage in Organic Batteries

With their bent π-systems, cyclic conjugation and inherent cavities, conjugated nanohoops are attractive for organic electronics applications. For ease of processing and morphological stability, an incorporation into polymers is desirable, but to date was hampered with few exceptions by synthetic difficulties. We herein present a unique strategy for the synthesis of conjugated nanohoop polymers using a dibenzo[a,e]pentalene (DBP) as central connector. We demonstrate this versatility by synthesizing three electronically diverse copolymers with dithienyldiketo(pyrrolopyrrol), fluorene and carbazole comonomers, and report the first donor-acceptor nanohoop polymer. Optoelectronic investigations reveal the prevalence of cyclic or linear conjugation, depending on the comonomer unit, and ambipolar electrochemical properties through the antiaromatic character of the DBP units. As the first report on using conjugated nanohoops for charge storage as positive electrode materials, we show a significant improvement in battery performance in a nanohoop-containing polymer compared to an equivalent nanohoop-free reference polymer. We believe this study will pave the way for the synthesis of a diverse range of nanohoop polymers and further stimulate their exploration for charge storage in batteries.     

含噻吩窄带隙共轭聚合物类太阳能电池材料的研究进展

含噻吩的窄带隙共轭聚合物类太阳能电池材料因其良好的稳定性和可加工性,已成为新型太阳能电池的研究热点。本论文主要介绍了用于太阳能电池的窄带隙共轭聚合物研究进展,按其结构特征分为烷基/烷氧基取代聚噻吩、含苯基聚噻吩、基于噻吩并吡嗪的共聚物、基于噻吩并噻唑的共聚物、基于噻吩并吩噻嗪的共聚物、基于烷基芴的共聚物以及其它种类的窄带隙的共轭聚合物,并对它们的结构特点、光学带隙、合成方法进行了归纳与总结。本文最后简要介绍了该研究领域目前所面临的一些问题,同时讨论了该类材料在此领域今后的发展趋势。     

The Synthesis of a Multiple D–A Conjugated Macrocycle and Its Application in Organic Photovoltaic

As a novel class of materials, D–A conjugated macrocycles hold significant promise for chemical science. However, their potential in photovoltaic remains largely untapped due to the complexity of introducing multiple donor and acceptor moieties into the design and synthesis of cyclic π-conjugated molecules. Here, we report a multiple D–A ring-like conjugated molecule ( RCM ) via the coupling of dimer molecule DBTP-C3 as a template and thiophenes in high yields. RCM exhibits a narrow optical gap (1.33 eV) and excellent thermal stability, and shows a remarkable photoluminescence yield (Φ_PL) of 11.1 % in solution, much higher than non-cyclic analogues. Organic solar cell (OSC) constructed with RCM as electron acceptor shows efficient charge separation at donor-acceptor band offsets and achieves a power conversion efficiency (PCE) of 14.2 %-approximately fourfold higher than macrocycle-based OSCs reported so far. This is partly due to low non-radiative voltage loss down to 0.20 eV and a high electroluminescence yield (Φ_EL) of 4×10⁻⁴. Our findings emphasize the potential of D–A cyclic conjugated molecules in advancing organic photovoltaic technology.     

Regulating the Sequence Structure of Conjugated Block Copolymers Enables Large-Area Single-Component Organic Solar Cells with High Efficiency and Stability

Single-component organic solar cells (SCOSCs) based on conjugated block copolymers (CBCs) by covalently bonding a polymer donor and polymer acceptor become more and more appealing due to the formation of a favorable and stable morphology. Unfortunately, a deep understanding of the effect of the assembly behavior caused by the sequence structure of CBCs on the device performance is still missing. Herein, from the aspect of manipulating the sequence length and distribution regularity of CBCs, we synthesized a series of new CBCs, namely D18(20)-b-PYIT, D18(40)-b-PYIT and D18(60)-b-PYIT by two-pot polymerization, and D18(40)-b-PYIT(r) by traditional one-pot method. It is observed that precise manipulation of sequence length and distribution regularity of the polymer blocks fine-tunes the self-assembly of the CBCs, optimizes film morphology, improves optoelectronic properties, and reduces energy loss, leading to simultaneously improved efficiency and stability. Among these CBCs, the D18(40)-b-PYIT-based device achieves a high efficiency of 13.4 % with enhanced stability, which is an outstanding performance among SCOSCs. Importantly, the regular sequence distribution and suitable sequence length of the CBCs enable a facile film-forming process of the printed device. For the first time, the blade-coated large-area rigid/flexible SCOSCs are fabricated, delivering an impressive efficiency of 11.62 %/10.73 %, much higher than their corresponding binary devices.     

Harnessing the Structure-Performance Relationships in Designing Non-Fused Ring Acceptors for Organic Solar Cells

The prerequisite for commercially viable organic solar cells (OSC) is to reduce the efficiency-stability-cost gap. Therefore, the cost of organic materials should be reduced by minimizing the synthetic steps, yet maintaining the molecular planarity and efficiencies achieved by the fused ring acceptors (FRA). In this respect, developing non-fused ring acceptors (NFRA) with suitable functionalization to favor conformational planarity and effective molecular packing is beneficial and cost-effective. Presently, the power conversion efficiency (PCE) for NFRAs is around 16 %, yet lower than the 19 % achieved for FRAs. Despite their potential, a thorough understanding of the effective structural design of NFRAs is necessary for developing efficient OSCs. This article pays special attention to the molecular design concept for NFRAs developed in the last years and analyzed the approach toward materials design and efficiency improvement, an important step toward technological application.     

Directional Defect Management in Perovskites by In Situ Decomposition of Organic Metal Chalcogenides for Efficient Solar Cells

Directional defects management in polycrystalline perovskite film with inorganic passivator is highly demanded while yet realized for fabricating efficient and stable perovskite solar cells (PSCs). Here, we develop a directional passivation strategy employing a two-dimensional (2D) material, Cu-(4-mercaptophenol) (Cu-HBT), as a passivator precursor. Cu-HBT combines the merits of the targeted modification from organic passivator and excellent stability offered by inorganic passivator. Featuring with dense organic functional motifs on its surfaces, Cu-HBT has the capability to “find” and fasten to the Pb defect sites in perovskites through coordination interactions during a spin-coating process. During subsequent annealing treatment, the organic functional motifs cleave from Cu-HBT and convert in situ into p-type semiconductors, Cu₂S and PbS. The resultant Cu₂S and PbS not only serve as stable inorganic passivators on the perovskite surface, significantly enhancing cell stability, but also facilitate efficient charge extraction and transport, resulting in an impressive efficiency of up to 23.5 %. This work contributes a new defect management strategy by directionally yielding the stable inorganic passivators for highly efficient and stable PSCs.     

Unsymmetrically Chlorinated Non-Fused Electron Acceptor Leads to High-Efficiency and Stable Organic Solar Cells

Searching the cost-effective organic semiconductors is strongly needed in order to facilitate the practice of organic solar cells (OSCs), yet to be fulfilled. Herein, we have succeeded in developing two non-fused ring electron acceptors (NFREAs), leading to the highest efficiency of 16.2 % for the NFREA derived OSCs. These OSCs exhibit the superior operational stabilities under one sun equivalent illumination without ultraviolet (UV) filtration. It is revealed that the modulation of halogen substituents on aromatic side chains, as the new structural tool to tune the intermolecular interaction and optoelectronic properties of acceptors, not only promotes the interlocked tic-tac-toe frame of three-dimensional stacks in solid, but also improves charge dynamics of acceptors to enable high-performance and stable OSCs.     

Oligomerized Fused-Ring Electron Acceptors for Efficient and Stable Organic Solar Cells

Organic solar cells (OSCs) have attracted wide research attention in the past decades. Very recently, oligomerized fused-ring electron acceptors (OFREAs) have emerged as a promising alternative to small-molecular/polymeric acceptor-based OSCs due to their unique advantages such as well-defined structures, batch reproducibility, good film formation, low diffusion coefficient, and excellent stability. So far, rapid advances have been made in the development of OFREAs consisting of directly/rigidly/flexibly linked oligomers and fused ones. In this Minireview, we systematically summarized the recent research progress of OFREAs, including structural diversity, synthesis approach, molecular conformation and packing, and long-term stability. Finally, we conclude with future perspectives on the challenges to be addressed and potential research directions. We believe that this Minireview will encourage the development of novel OFREAs for OSC applications.     

Development of Organic Dye‐Based Molecular Materials for Use in Fullerene‐Free Organic Solar Cells

This personal account describes the pursuit of non‐fullerene acceptors designed from simple and accessible organic pi‐conjugated building blocks and assembled through efficient direct (hetero)arylation cross‐coupling protocols. Initial materials development focused on isoindigo and diketopyrrolopyrrole organic dyes flanked by imide‐based terminal acceptors. Efficiencies in solution‐processed organic solar cells were modest but highlighted the potential of the material design. Materials performance was improved through structural engineering to pair perylene diimide with these organic dyes. Optimization of active layer processing and solar cell device fabrication identified the perylene diimide flanked diketopyrrolopyrrole structure as the best framework, with fullerene‐free organic solar cells achieving power conversion efficiencies above 6 %. This material has met our criteria for a simple wide band gap fullerene alternative for pairing with a range of donor polymers.     

Terminally Chlorinated and Thiophene-linked Acceptor-Donor-Acceptor Structured 3D Acceptors with Versatile Processability for High-efficiency Organic Solar Cells

To exploit the potential of our newly developed three-dimensional (3D) dimerized acceptors, a series of chlorinated 3D acceptors (namely CH8-3/4/5) were reported by precisely tuning the position of chlorine (Cl) atom. The introduction of Cl atom in central unit affects the molecular conformation. Whereas, by replacing fluorinated terminal groups (CH8-3) with chlorinated terminal groups (CH8-4 and CH8-5), the red-shift absorption and enhanced crystallization are achieved. Benefiting from these, all devices received promising power conversion efficiencies (PCEs) over 16 % as well as decent thermal/photo-stabilities. Among them, PM6:CH8-4 based device yielded a best PCE of 17.58 %. Besides, the 3D merits with multi alkyl chains enable their versatile processability during the device preparation. Impressive PCEs of 17.27 % and 16.23 % could be achieved for non-halogen solvent processable devices prepared in glovebox and ambient, respectively. 2.88 cm² modules also obtained PCEs over 13 % via spin-coating and blade-coating methods, respectively. These results are among the best performance of dimerized acceptors. The decent performance of CH8-4 on small-area devices, modules and non-halogen solvent-processed devices highlights the versatile processing capability of our 3D acceptors, as well as their potential applications in the future.     

Molecular Stacking and Aggregation Optimization of Photoactive Layer through Solid Additive Enables High-Performance Organic Solar Cells

Regulating molecular packing and aggregation of photoactive layer is a critical but challenging issue in developing high-performance organic solar cells. Herein, two structurally similar analogues of anthra[2,3-b : 6,7-b′]dithiophene (ADT) and naphtho[1,2-b : 5,6-b′]dithiophene (NDT) are developed as solid additive to exploit their effect in regulating the molecular aggregation and π-stacking of photoactive layer. We clarify that the perpendicular arrangements of NDT can enlarge the molecular packing space and improve the face-on stacking of Y6 during the film formation, favoring a more compact and ordered long-range π-π stacking in the out-of-plane direction after the removal of NDT under thermal annealing. The edge-to-face stacked herringbone-arrangement of ADT along with its non-volatilization under thermal annealing can induce the coexistence of face-on and edge-on stacking of blend film. As a result, the NDT treatment shows encouraging effect in improving the photovoltaic performance of devices based on various systems. Particularly, a remarkable PCE of 18.85 % is achieved in the PM6 : L8-BO-based device treated by NDT additive, which is a significant improvement with regard to the PCE of 16.41 % for the control device. This work offers a promising strategy to regulate the molecular packing and aggregation of photoactive layer towards significantly improved performance and stability of organic solar cells.     

全固态有机太阳能电池

从全固态有机太阳能电池的历史发展情况和研究现状出发,对现阶段全固态有机太阳能电池的结构和性能作了介绍和评估,并从材料等方面分析了它们的优势和不足之处,讨论了全固态有机太阳能电池研究的未来发展。     

Nucleation and Crystallization in 2D Ruddlesden-Popper Perovskites using Formamidinium-based Organic Semiconductor Spacers for Efficient Solar Cells

The conjugated organic semiconductor spacers have drawn wide attention in two-dimensional (2D) perovskites and formamidinium (FA) has been widely used as A-site cation in high-performance 3D perovskite solar cells (PSCs). However, the FA-based semiconductor spacers have rarely been investigated in 2D Ruddlesden-Popper (RP) perovskites. Here, we developed two FA-based spacers containing thieno[3,2-b]thiophene (TT) and 2,2′-bithiophene (BT) units, namely TTFA and BTFA, respectively, for 2D RP PSCs. The nucleation and crystallization kinetics of TTFA-Pb and BTFA-Pb from sol-gel to film were investigated using in situ optical microscopy and in situ grazing incidence wide-angle X-ray scattering (GIWAXS) measurements. It is found that the TTFA spacer could reduce the energy barrier of nucleation and induces crystal vertical orientation of 2D perovskite by forming larger clusters in precursor solution, resulting in much improved film quality. Benefiting from the enlarged crystal grains, reduced exciton binding energy, and decreased electron-phonon coupling coefficient, the photovoltaic device based on (TTFA)₂MA_n−1Pb_nI_3n+1 (n=5) achieved a champion efficiency of 19.41 %, which is a record for 2D RP PSCs with FA-based spacers. Our work provides deep understanding of the nucleation and crystallization process of 2D RP perovskite films and highlights the great potential of FA-based semiconductor spacers in highly efficient 2D PSCs.     

Can Polymer Solar Cells Open the Path to Sustainable and Efficient Photovoltaic Windows Fabrication?

Sunlight is among the most abundant energy sources available on our planet. Finding adequate solutions to properly and efficiently harvest it is of major importance to potentially solve the global energy crisis. Polymer solar cells have been introduced in the late 20^th century as low‐cost and easily processed alternative to the state‐of‐the‐art silicon photovoltaics. Their power conversion efficiencies, which were initially rather low, are constantly improving and now reach values close to 15 %. As their optical properties can be easily tuned, designing active layer which absorb homogeneously throughout the visible spectrum is relatively simple. These peculiar characteristics enable the possibility to fabricate visibly transparent solar cells with high color rendering indices which can be employed as photovoltaic windows. After reviewing some of the most successful examples of polymer solar cell‐based transparent photovoltaic window fabrication, I will discuss the possibility to produce these devices in a sustainable and/or eco‐friendly manner while maintaining their performances.     

聚合物太阳能电池研究进展

有机材料是近年来新型太阳能电池的研究热点,本文按太阳能电池材料的组成分类,对太阳能电池的原理及其材料的种类进行了详细地总结,重点介绍了导电聚合物基的太阳能电池的研究进展.     

CdSe纳米晶/共轭聚合物太阳电池的制备与性能研究

采用有机金属液相法制备了平均粒径为5 nm的CdSe纳米微球(ns-CdSe), 并将其与共轭聚合物(MEH-PPV或P3HT)共混制备了太阳电池器件. 透射电镜(TEM)、紫外-可见吸收光谱(UV-Vis)及荧光光谱(PL)研究结果表明, CdSe纳米晶呈均匀的球状颗粒, 在近红外区具有良好的吸收和荧光性能; 加入CdSe纳米晶能够有效地淬灭共轭聚合物的荧光. 在AM1.5模拟太阳光(光强为100 mW/cm2)照射下, ns-CdSe/MEH-PPV共混体系太阳电池器件性能测试结果为: 短路电流ISC为1.56 mA/cm2, 开路电压VOC为0.75 V, 填充因子FF为34.5％, 光电转换效率η为0.40%; 对于ns-CdSe/P3HT共混体系, 其ISC为1.93 mA/cm2, VOC为0.65 V, FF为38.4%, η为0.48%.