Supported Pd–Cu Bimetallic Nanoparticles That Have High Activity for the Electrochemical Oxidation of Methanol

Monodisperse bimetallic Pd–Cu nanoparticles with controllable size and composition were synthesized by a one‐step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd₈₅–Cu₁₅, Pd₅₆–Cu₄₄, and Pd₃₉–Cu₆₁. The nanoparticles were separated from the solution mixture by extraction with non‐polar solvents, such as n‐hexane. Monodisperse bimetallic Pd–Cu nanoparticles with narrow size‐distribution were obtained without the need for a size‐selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as‐prepared nanoparticles were loaded onto a Vulcan XC‐72 carbon support. Supported bimetallic Pd–Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd–Cu catalyst that contained 15 % Cu, the activity was even comparable to the state‐of‐the‐art commercially available Pt/C catalysts. A STEM‐HAADF study indicated that the formation of random solid‐solution alloy structures in the bimetallic Pd₈₅–Cu₁₅/C catalysts played a key role in improving the electrochemical activity.     

A Novel Electrochemical Method for the Analysis of Hydrogen Peroxide with the Use of a Glassy Carbon Electrode Modified by a Prussian Blue/Copper‐Gold Bimetallic Nanoparticles Hybrid Film

A novel Prussian blue/copper‐gold bimetallic nanoparticles hybrid film modified electrode was prepared by electrochemical deposition on a glassy carbon electrode (PB/Cu‐AuNPs/GCE). Morphology and electrochemistry of this electrode were studied by UV‐vis spectroscopy, scanning electron microscopy, X‐ray diffraction, cyclic voltammetry and electrochemical impedance spectroscopy. The sensor showed significantly better electrocatalytic activity for the reduction of hydrogen peroxide in comparison with the single PB/GCE and PB/AuNPs/GCE. This was attributed to the synergistic effect of PB and Cu‐Au bimetallic nanoparticles. Also, the sensor demonstrated an overall high level of performance for the analysis of H₂O₂ in the concentration range from 0.002 to 0.84 mM.     

Pyrolytic Carbon‐coated Cu‐Fe Alloy Nanoparticles with High Catalytic Performance for Oxygen Electroreduction

Well‐dispersed carbon‐coated or nitrogen‐doped carbon‐coated copper‐iron alloy nanoparticles (FeCu@C or FeCu@C?N) in carbon‐based supports are obtained using a bimetallic metal‐organic framework (Cu/Fe‐MOF‐74) or a mixture of Cu/Fe‐MOF‐74 and melamine as sacrificial templates and an active‐component precursor by using a pyrolysis method. The investigation results attest formation of Cu?Fe alloy nanoparticles. The obtained FeCu@C catalyst exhibits a catalytic activity with a half‐wave potential of 0.83 V for oxygen reduction reaction (ORR) in alkaline medium, comparable to that on commercial Pt/C catalyst (0.84 V). The catalytic activity of FeCu@C?N for ORR (E_half‐wave=0.87 V) outshines all reported analogues. The excellent performance of FeCu@C?N should be attributed to a change in the energy of the d‐band center of Cu resulting from the formation of the copper–iron alloy, the interaction between alloy nanoparticles and supports and N‐doping in the carbon matrix. Moreover, FeCu@C and FeCu@C?N show better electrochemical stability and methanol tolerance than commercial Pt/C and are expected to be widely used in practical applications.     

Rapid Synthesis of Porous Honeycomb Cu/Pd through a Hydrogen‐Bubble Templating Method

A rapid electrochemical method based on using a clean hydrogen‐bubble template to form a bimetallic porous honeycomb Cu/Pd structure has been investigated. The addition of palladium salt to a copper‐plating bath under conditions of vigorous hydrogen evolution was found to influence the pore size and bulk concentration of copper and palladium in the honeycomb bimetallic structure. The surface was characterised by X‐ray photoelectron spectroscopy, which revealed that the surface of honeycomb Cu/Pd was found to be rich with a Cu/Pd alloy. The inclusion of palladium in the bimetallic structure not only influenced the pore size, but also modified the dendritic nature of the internal wall structure of the parent copper material into small nanometre‐sized crystallites. The chemical composition of the bimetallic structure and substantial morphology changes were found to significantly influence the surface‐enhanced Raman spectroscopic response for immobilised rhodamine B and the hydrogen‐evolution reaction. The ability to create free‐standing films of this honeycomb material may also have many advantages in the areas of gas‐ and liquid‐phase heterogeneous catalysis.     

Electrochemical Synthesis of Shape-controlled Cu−Ni Nanocomposite and its Application for Nonenzymatic Glucose Sensing at Nanomolar Level

The electrodeposition method was firstly applied to obtain uniform cube-shaped copper nanoparticles on conductive glass (ITO), and then a layer of tiny nickel nanoparticles. A bimetallic composite electrode (Cu−Ni/ITO), characterized by TEM, XPS and XRD, was prepared to construct the non-enzyme electrochemical glucose sensor with high catalytic activity. The catalytic performance of Cu−Ni/ITO had been greatly improved, probably due to the synergistic bimetallic catalysis effect. The electrode had a satisfactory linear response in the range of 2.5×10⁻⁷ M to 2.6×10⁻³ M, with detection limit as low as 67 nM. Besides, Cu−Ni/ITO had good anti-interference ability and reproducibility, indicating the promising application for glucose detection in practical samples.     

Pd‐Cu alloy nanoparticle supported on amine‐terminated ionic liquid functional 3D graphene and its application on Suzuki cross‐coupling reaction

Well distributed Pd‐Cu bimetallic alloy nanoparticles supported on amine‐terminated ionic liquid functional three‐dimensional graphene (3D IL‐rGO/Pd‐Cu) as an efficient catalyst for Suzuki cross‐coupling reaction has been prepared via a facile synthetic method. The introduction of IL‐NH₂ cations on the surface of graphene sheets can effectively avoid the re‐deposition of graphene sheets, allowing the catalyst to be reused up to 10 cycles. The addition of Cu not only saves cost but also ensures high catalytic efficiency. It is worthy to note that the catalyst 3D IL‐rGO/Pd_2.5Cu_2.5 can efficiently catalyze the Suzuki cross‐coupling reaction with the yield up to 100% in 0.25 h, almost one‐fold higher than that by the pristine IL‐rGO/Pd_2.5 catalyst (52%). The Powder X‐Ray Diffraction (XRD), combining energy dispersive X‐ray spectroscopy (EDS) mapping results confirm the existence and distribution of Pd and Cu in the bimetallic nanoparticles. The transmission electron microscopy (TEM) reveals the nanoparticle size with an average diameter of 3.0 ± 0.5 nm. X‐ray photoelectron spectroscopy (XPS) analysis proved the presence of electron transfer from Cu to Pd upon alloying. Such alloying‐induced electronic modification of Pd‐Cu alloy and 3D ionic liquid functional graphene with large specific surface area both accounted for the catalytic enhancement.     

Noble Metal‐Iron Oxide Hybrid Nanomaterials: Emerging Applications

This account provides an overview of current research activities that focus on the synthesis and applications of nanomaterials from noble metal (e.g., Au, Ag, Pd) and iron oxide (Fe₃O₄) hybrids. An introduction to the synthetic strategies that have been developed for generating M–Fe₃O₄ nanomaterials with different novel structures is presented. Surface functionalization and bioconjugation of these hybrid nanoparticles and nanocomposites are also reviewed. The utilization of the advantageous properties of both noble metals and iron oxide for a variety of applications, such as theranostics, gene delivery, biosensing, cell sorting, bioseparation, and catalysis, is discussed and highlighted. Finally, future trends and perspectives of these sophisticated nanocomposites are outlined. The fundamental requirements underpinning the effective preparation of M–Fe_xO_y hybrid nanomaterials shed light on the future development of heterogeneous catalysts, nanotheranostics, nanomedicines, and other chemical technologies.     

Exposing the Delocalized Cu−S π Bonds on the Au24Cu6(SPhtBu)22 Nanocluster and Its Application in Ring‐Opening Reactions

Bimetallic nanomaterials are of major importance in catalysis. A Au‐Cu bimetallic nanocluster was synthesized that is effective in catalyzing the epoxide ring‐opening reaction. The catalyst was analyzed by SCXRD and ESI‐MS and found to be Au₂₄Cu₆(SPhtBu)₂₂ (Au₂₄Cu₆ for short). Six copper atoms exclusively occupy the surface positions in two groups with three atoms for each, and each group was bonded with three thiolate ligands to give a planar motif reminiscent of a benzene ring. In the epoxide‐ring opening reaction, Au₂₄Cu₆ exhibited superior catalytic activity compared to other homometallic and Au‐Cu alloy NCs, such as Au₂₅ and Au_38?xCu_x. Control experiments and DFT calculations revealed that the π conjugation among the Cu?S bonds played a pivotal role. This study demonstrates a unique π conjugation established among the Cu?S bonds as a critical structural motif in the nanocluster, which facilitates the catalysis of a ring‐opening reaction.     

Nanocrystalline copper sulfide of varying morphologies and stoichiometries in a low temperature solvothermal process using a new single-source molecular precursor

Surfactantless synthesis of copper sulfide nanoparticles (NPs) with varied morphologies such as hexagonal rods, rhombohedral, and spherical, has been carried out via low-temperature thermolysis of a new single-source precursor, [Cu(SMDTC)Cl₂], (where SMDTC is S-methyl dithiocarbazate). The reaction parameters e.g., temperature and nature of solvent can be used to control the size and morphology of the nanoparticles. It is observed that the solvents played an important role to control the morphology and stoichiometry of copper sulfide. The anisotropic absorption by the chelating solvent (diamine or ethyleneglycol) at the different facets of the newborn microcrystals results the growth of one-dimensional (1D) copper sulfide NPs. The possible formation mechanism of copper sulfide NPs has also been discussed.     

Stabilization of Copper Catalysts for Liquid‐Phase Reactions by Atomic Layer Deposition

Atomic layer deposition (ALD) of an alumina overcoat can stabilize a base metal catalyst (e.g., copper) for liquid‐phase catalytic reactions (e.g., hydrogenation of biomass‐derived furfural in alcoholic solvents or water), thereby eliminating the deactivation of conventional catalysts by sintering and leaching. This method of catalyst stabilization alleviates the need to employ precious metals (e.g., platinum) in liquid‐phase catalytic processing. The alumina overcoat initially covers the catalyst surface completely. By using solid state NMR spectroscopy, X‐ray diffraction, and electron microscopy, it was shown that high temperature treatment opens porosity in the overcoat by forming crystallites of γ‐Al₂O₃. Infrared spectroscopic measurements and scanning tunneling microscopy studies of trimethylaluminum ALD on copper show that the remarkable stability imparted to the nanoparticles arises from selective armoring of under‐coordinated copper atoms on the nanoparticle surface.     

Controlled Anisotropic Growth of Co‐Fe‐P from Co‐Fe‐O Nanoparticles

A facile approach to bimetallic phosphides, Co‐Fe‐P, by a high‐temperature (300 °C) reaction between Co‐Fe‐O nanoparticles and trioctylphosphine is presented. The growth of Co‐Fe‐P from the Co‐Fe‐O is anisotropic. As a result, Co‐Fe‐P nanorods (from the polyhedral Co‐Fe‐O nanoparticles) and sea‐urchin‐like Co‐Fe‐P (from the cubic Co‐Fe‐O nanoparticles) are synthesized with both the nanorod and the sea‐urchin‐arm dimensions controlled by Co/Fe ratios. The Co‐Fe‐P structure, especially the sea‐urchin‐like (Co_0.54Fe_0.46)₂P, shows enhanced catalysis for the oxygen evolution reaction in KOH with its catalytic efficiency surpassing the commercial Ir catalyst. Our synthesis is simple and may be readily extended to the preparation of other multimetallic phosphides for important catalysis and energy storage applications.     

Bimetallic Catalysis using Transition and Group 11 Metals: An Emerging Tool for C?C Coupling and Other Reactions

Bimetallic catalysis refers to homogeneous processes in which either two transition metals (TM), or one TM and one Group 11 (G11) element (occasionally Hg also), cooperate in a synthetic process (often a C? C coupling) and their actions are connected by a transmetalation step. This is an emerging research area that differs from the isolated or tandem applications of the now classic processes (Stille, Negishi, Suzuki, Hiyama, Heck). Most of the reactions used so far combine Pd with a second metal, often Cu or Au, but syntheses involving very different TM couples (e.g., Cr/Ni in the catalyzed vinylation of aldehydes) have also been developed. Further development of the topic will soon demand a good knowledge of the mechanisms involved in bimetallic catalysis, but this knowledge is very limited for catalytic processes. However, there is much information available, dispersed in the literature, coming from basic research on exchange reactions occurring out of any catalytic cycle, in polynuclear complexes. These are essentially the same processes expected to operate in the heart of the catalytic process. This Review gathers together these two usually isolated topics in order to stimulate synergy between the bimetallic research coming from more basic organometallic studies and the more synthetic organic approaches to this chemistry.     

Catalytic CO Oxidation by O2 Mediated by Noble‐Metal‐Free Cluster Anions Cu2VO3–5−

Catalytic CO oxidation by molecular O₂ is an important model reaction in both the condensed phase and gas‐phase studies. Available gas‐phase studies indicate that noble metal is indispensable in catalytic CO oxidation by O₂ under thermal collision conditions. Herein, we identified the first example of noble‐metal‐free heteronuclear oxide cluster catalysts, the copper–vanadium bimetallic oxide clusters Cu₂VO_3–5^? for CO oxidation by O₂. The reactions were characterized by mass spectrometry, photoelectron spectroscopy, and density functional calculations. The dynamic nature of the Cu?Cu unit in terms of the electron storage and release is the driving force to promote CO oxidation and O₂ activation during the catalysis.     

Pickering Emulsion Stabilized by Catalytic Polyoxometalate Nanoparticles: A New Effective Medium for Oxidation Reactions

Decyl‐, dodecyl‐, and tetradecyltrimethylammonium cations were combined with the catalytic polyoxometalate [PW₁₂O₄₀]^3? anion to give spherical and monodisperse nanoparticles that are able to stabilize emulsions in the presence of water and an aromatic solvent. This triphasic liquid/solid/liquid system, based on a catalytic surfactant, is particularly efficient as a reaction medium for epoxidation reactions that involve hydrogen peroxide. The reactions proceed at competitive rates with straightforward separation of the phases by centrifugation. Such catalytic “Pickering” emulsions combine the advantages of heterogeneous catalysis and biphasic catalysis without the drawbacks (e.g., catalyst leaching or separation time).     

Electronic Modulation of Palladium in Metal Phosphide Nanoparticles for Chemoselective Reduction of Halogenated Nitrobenzenes

Tuning the electronic property of a transition metal plays an important role in the selective catalysis. Herein, the control synthesis of (Pd_xNi_y)‐P nanoparticles is reported. The binding energy of Pd3d_5/2 as a function of x/y ratio is well tunable from 335.3 to 335.9 eV. The composition‐induced electronic modulation was correlated with the selective catalysis of (Pd_xNi_y)‐P in the reduction of halogenated nitrobenzenes. The electro‐deficiency of Pd helped to improve the selectivity. The amorphous (Pd₃₈Ni₂₆)P₃₆/C performed an exceptional selectivity in comparison with other related (Pd‐Ni)‐P/C, Pd₃₈Ni₂₆/C, and Pd/C. Various halogenated nitrobenzenes (chlorides, bromides, and iodide) were tolerant and the corresponding halogenated anilines were obtained in high yields. This work provides some clues for the rational design of bimetallic phosphides with covalent interactions to boost the catalysis.     

Ligand-stabilized metal nanoparticles in organic solvent

This critical review reports the fundamental behavior of metal nanoparticles in different organic solvents, i.e., metal organosol. An overview on metal organosol and then their smart synthetic approaches, characterization, and potential applications in the fields of catalysis and spectroscopy with special emphasis on SERS are embodied. Aspects of organosol fabrication, stabilization, morphology control, growth mechanisms, and physical properties as mono- and bimetallic nanoparticles are discussed. The article inspires the repetitive usage of metal nanoparticles as stable deliverable organic and molecular compounds.     

Cu (II)‐β‐cyclodextrin complex stabilized on magnetic nanoparticles: A retrievable hybrid promoter for green synthesis of spiropyrans

The magnetic core of manganese ferrite (MnFe₂O₄) nanoparticles has a significant stability in comparison with ferrite (Fe₃O₄) nanoparticles. The unique supramolecular properties of β‐cyclodextrin (β‐CD), such as hydrophobic cavity, hydrophilic exterior and ‐OH functional groups, make it a good candidate for functionalization and catalytic application. So, a surface‐modified magnetic solid support with the Cu (II)‐β‐CD complex was prepared. The structure of nanoparticles was characterized by Fourier transform‐infrared spectroscopy, X‐ray powder diffraction, thermogravimetric analysis, vibrating‐sample magnetometry, inductively coupled plasma‐optical emission spectrometry and scanning electron microscope analyses. The catalytic activity of these nanoparticles was investigated in the synthesis of spiropyrans and high yields of desired products obtained under green media. Some advantages of this novel catalyst for this reaction are high yields, short reaction times, green solvent and conditions, easy workup procedure, negligible copper leaching, reusability without a significant diminish in catalytic efficiency, and simple separation of nanocatalyst by using an external magnet alongside the environmental compatibility and sustainability.     

Mesoporous Bubble‐like Manganese Silicate as a Versatile Platform for Design and Synthesis of Nanostructured Catalysts

Manganese silicate in bubble‐like morphology was used as a versatile platform to prepare a new class of yolk–shell hybrids. The mesoporosity of the shell was generated from the interbubble space and the bubble structure of manganese silica was used to hold and support nanoparticles (e.g., Au, Ag, Pt, Co, Ni, Au–Pd alloy, MoO₂, Fe₃O₄, carbon nanotubes and their combinations). We also used heterogeneous catalysis reactions to demonstrate the workability of these catalysts in both liquid and gas phases.     

对比生物体系以及合成体系中单核铜氧物种对碳氢键和氧氢键活化的理论研究展望

由于具有较好的催化性能,含过渡金属的酶一直备受研究者的关注.其中,铜作为生物体中含量仅次于铁和锌的过渡金属,在新陈代谢过程中发挥着重要作用.铜酶广泛存在于自然界中,该类生物大分子涉及电子转移、氧化还原、氧气的运输与活化等生物化学过程.多种铜酶在氧气活化方面表现出引人注目的 性质,例如:颗粒状甲烷单加氧酶(pMMO)、多...