Magnetic behavior of tetrahedral Cr4+ compounds: Sr2CrO4, Ba2CrO4, and Ba3CrO5

The preparation of the compounds Sr₂CrO₄, Ba₂CrO₄, and Ba₃CrO₅ is described. The characterization of these three Cr⁴⁺ compounds by X-ray and magnetic susceptibility experiments has been conducted. The magnetic moments for Sr₂CrO₄, Ba₂CrO₄, and Ba₃CrO₅ were determined to be in good agreement with the calculated value expected for a tetrahedral Cr⁴⁺ ion. Weak antiferromagnetic ordering for all three compounds is indicated from the small paramagnetic Weiss constants determined from the susceptibility data in the temperature region 80–300 K. Distortions of the tetrahedra from ideality, as determined from the structural features, further cause a reduction in the magnetic moments from the theoretical values.     

Fluorite-related phases Ln3MO7, Ln = Rare-earth,Y or Sc, M = Nb,Sb or Ta. III. Structure of the non-stoichiometric Y3TaO7 phase

The orthorhombic fluorite-related superstructure phase Y₃TaO₇ is non-stoichiometric; the Y₂O₃ content may be varied from 75.0 to about 72.5 mole% without incurring structural changes. For overall Y₂O₃ contents from 72.0 to 70.5 mole%, the crystal symmetry changes from C222₁ to Cmmm, and the c axis becomes halved. The structure of the low-Y₂O₃ material has been determined from powder X-ray diffraction intensities supplemented by single crystal electron-optical data. The relationship of this structure to that of stoichiometric Y₃TaO₇ is discussed.     

Distinguishing the formation of C2D+4 ions from C2D+6 (by D2 loss) and from C2D5H+ (by HD loss) in a Reflectron spectrometer

The D₂ loss from C₂D⁺₆ ions and the HD loss from C₂D₅H⁺ ions has been investigated in a photoelectron photoion coincidence experiment employing a reflecting ion time of a flight mass spectrometer (Reflectron). The experiment is able to distinguish the metastable formation of C₂D⁺₄ ions (m/z = 32) from C₂D⁺₆ ions by D₂ loss and from C₂D₅H⁺ ions by HD loss simultaneously in a mixture of deuterated ethanes. The breakdown curves of the title reactions are presented and compared to the H₂ loss from C₂H⁺₆ ions. The HD loss from C₂D₅H⁺ is shifted by 67 meV and the D₂ loss from C₂D⁺₆ is shifted by 108 meV with respect to the H₂ loss from C₂H⁺₆. This shift reflects a strong kinetic isotope effect which is most likely due to tunneling of H/D atoms through a barrier.     

Extraction of europium from mixed acids and mixed aqueous—Organic media

The extraction of Eu with Amberlite LA-2, TBP and HDEHP from HF, HCl, HBr, H₂SO₄, CH₃ COOH and KI solutions was investigated. The extraction of Eu with TBP and LA-2 is small over a wide range of concentrations. The extraction of Eu with HDEHP from HCl, HBr, and H₂SO₄ is inversely proportional to the third power of the acid concentration, while the extraction from KI is proportional to the square of the extractant concentration. The extraction by the three extractants from H₂SO₄ in presence of small amounts of hydrogen halides is small. These extraction data can be used to separate Eu from Th and many of the fission products. The presence of water-miscible alcohols and acetone generally increases the extraction of Eu from H₂SO₄ and KI solutions.     

New baths for the deposition of manganese and cobalt oxides

New methods have been adopted for the anodic deposition of the different manganese and cobalt oxides. The deposition of the diferent oxides is usually carried out from their metal salt solutions in presence of a reducing agent. The oxides deposited are as follows: Mn₂O₃ from manganous sulphate in presence of boric, acid and formaldehyde at pH=5.5, Mn₃O₄ from manganous sulphate in presence of formic acid at pH=5.0 MnO from manganous sulphate-ammonium chloride solution in presence of telluric acid, Co₂O₃ from cobalt chloride in presence of telluric acid and sodium fluoride, Co₃O₄ from cobaltite in presence of formaldehyde and potassium chloride and finally CoO from cobalt chloride in presence of alcohol. The results of chemical analysis revealed that the purity of the oxides is 99.99% and their molecular formulae are MnO_1.5, MnO_1.33, MnO, CoO_1.5, CoO_1.33 and CoO respectively.     

Determination of the excitation mechanism for photofragment emission in the ArF laser photolysis of NH3, N2H4, HNO3 and CH3NH2

The mechanism for production of electronically excited photofragments from the title molecules is investigated using two excimer lasers in a pump-probe experiment. We find for NH(A) from NH₃, N₂H₄ and CH₃NH₂; OH(A) from HNO₃ and CN(B) and CH(A, B) from CH₃NH₂ that secondary excitation of primary photofragments is involved.     

Electron donor properties and catalytic activity of manganese ferrospinels

The electron donating properties of manganese ferrospinels of various compositions (MnFe₂O₄, Mn_1.2Fe_1.8O₄, Mn₂FeO₄ and Mn_2.5Fe_0.5O₄) were studied from the adsorption of electron acceptors of various electron affinity values from acetonitrile as solvent. The limit of electron transfer from the oxide surface is from 1.77 to 2.40 eV in terms of the electron affinity of the electron acceptor. The data have been correlated with the catalytic activity of these oxides towards autoxidation of sulfites. Both weak and strong electron donor sites catalyze the reaction.     

Characterization of phase transition of Ba2-xSrxIn2O5 by thermal analysis and high temperature X-ray diffraction

The phase transitions of Ba_2-xSr_xIn₂O₅ were investigated with various thermal analyses and high-temperature X-ray diffraction. It was clarified that crystal structure of Ba_2-xSr_xIn₂O₅ with x=0.0~0.4 varies from brownmillerite through distorted perovskite to another distorted perovskite with increase of temperature. The phase transition from brownmillerite to distorted perovskite was revealed to be first order, whereas transition from distorted perovskite to another one was second order. The specimen with x≥0.5 showed only one first order phase transition from brownmillerite to distorted perovskite. The phase diagram of Ba_2-xSr_xIn₂O₅ was established and existence of tricritical point at ~1100°C with x=0.4~0.5 was suggested. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preparation and properties of potassium pentafluorodioxo-tungstate (VI) K3WO2F5 and potassium octafluoropentaoxo-ditungstate (VI) K6W2O5F8

The potassium salts of two new hepta coordinated oxyfluoro anions of tungsten (VI) are reported in this paper. The monomer, K₃WO₂F₅ was obtained from the aqueous solution while the dimer, K₆W₂O₅F₈ was isolated from alcohol. The absorption peak of K₆W₂O₅F₈ at 830 cm^-1 has been attributed to W-O-W link. The W-O-W angle is found to be 155° and the force constant is 4.44 mdyn/A°. The d values obtained from x-ray powder diffraction studies are given.     

Rate of reactions between D2O and CaxAlyOz

The rate of the reaction between D₂O and the calcium aluminum oxides Ca₃Al₂O₆, Ca₅Al₆O₁₄, CaAl₂O₄, and CaAl₄O₇ was investigated by on-line neutron diffraction powder methods at temperatures from room temperature to 100°C. The rate of the reaction increases with increasing calcium content of the compounds and with increasing temperature for each of the compounds. The crystallographic stable hydrate Ca₃Al₂(OD)₁₂ is obtained from CaAl₄O₇ and CaAl₂O₄ at temperatures above 63°C, from Ca₅Al₆O₁₄ at temperatures above 49°C, and from Ca₃Al₂O₆ at temperatures as low as 7°C.     

Molecular structures of two unexpected metal complexes obtained from additions of coordinated phosphines to acetylenes

The syntheses and structures of two new compounds are reported. The first compound, [Cr(CO)₄]₂[C₄F₂(PPh₂)₄], obtained from Cr(CO)₄(PPh₂H)₂ and CF₃CCF₃ in the presence of one equivalent of BuLi has a structure with the ligand 1,2,3,4-tetrakis(diphenylphosphino)-1,4-difluorobutadiene chelating to two Cr(CO)₄ groups via the 1,4 and 2,3 phosphine groups. A mechanism for the formation of this compound is suggested which involves sequential deprotonation of a phosphine, nucleophilic attack on the fluorocarbon, and fluoride ion elimination. The second compound, CrC₃₆H₂₈P₂O₇, arises from a similar base promoted reaction of Cr(CO)₄-(PPhH₂)₂ and PhCCCOOEt. Here the expected initial product from cyclization of these reactants acts as a nucleophile to attack a second equivalent of the acetylene. The intermediate carbanion from this reaction can undergo a ring closure by displacement of OEt^-, giving the observed product.     

Thermo-Raman Studies on Dehydration of Na4P2O7⋅10H2O and Phase Transformations of Na4P2O7

In this work, dehydration of sodium diphosphate decahydrate Na₄P₂O₇⋅10H₂O and phase transformations of Na₄P₂O₇ in open air have been studied in detail by thermo-Raman spectroscopy. The spectra were measured continuously in a temperature range from room temperature up to 600°C for the bands of P₂O₇ ^4- and H₂O. The spectral variation showed one step of dehydration and four-phase transformations. The thermo-Raman intensity(TRI) and differential thermo-Raman intensity (DTRI) curves calculated from the characteristic bands of H₂O also showed one step of dehydration with the loss of all hydrated water in the temperature interval from 45 to 69°C. Thermogravimetric measurements supported this result. The thermo-Raman investigation indicated the transformation of Na₄P₂O₇ from low temperature phase to high temperature phase proceed through pre-transitional region from 75 to 410°C before the major orientational disorder at 418°C and minor structural modifications at 511,540 and 560°C. The results from differential scanning calorimetry and differential thermal analysis on Na₄P₂O₇ showed endotherms at 407,517, 523, 548, 557°C and 426, 528, 534, 555, 565°C, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

On the synthesis and properties of hydrazinium(1+) fluoride

The isolation of N₂H₅F from aqueous solutions is described and compared with the isolation from anhydrous hydrazine. The melting point, solubilities in various solvents and density of N₂H₅F are given.     

Improving the robustness of a partial least squares (PLS) model based on pure component selectivity analysis and range optimization: case study for the analysis of an etching solution containing hydrogen peroxide

Pure component selectivity analysis (PCSA) was successfully utilized to enhance the robustness of a partial least squares (PLS) model by examining the selectivity of a given component to other components. The samples used in this study were composed of NH₄OH, H₂O₂ and H₂O, a popular etchant solution in the electronic industry. Corresponding near-infrared (NIR) spectra (9000-7500 cm⁻¹) were used to build PLS models. The selective determination of H₂O₂ without influences from NH₄OH and H₂O was a key issue since its molecular structure is similar to that of H₂O and NH₄OH also has a hydroxyl functional group. The best spectral ranges for the determination of NH₄OH and H₂O₂ were found with the use of moving window PLS (MW-PLS) and corresponding selectivity was examined by pure component selectivity analysis. The PLS calibration for NH₄OH was free from interferences from the other components due to the presence of its unique NH absorption bands. Since the spectral variation from H₂O₂ was broadly overlapping and much less distinct than that from NH₄OH, the selectivity and prediction performance for the H₂O₂ calibration were sensitively varied depending on the spectral ranges and number of factors used. PCSA, based on the comparison between regression vectors from PLS and the net analyte signal (NAS), was an effective method to prevent over-fitting of the H₂O₂ calibration. A robust H₂O₂ calibration model with minimal interferences from other components was developed. PCSA should be included as a standard method in PLS calibrations where prediction error only is the usual measure of performance.     

Microencapsulation technology for thiourea corrosion inhibitor

The microencapsulation technology was brought in to solidify corrosion inhibitor in order to prolong the releasing time of it. In this work, thiourea (H₂NCSNH₂) was used as a corrosion inhibitor and microcapsuled using glutin and polyvinyl alcohol (PVA), respectively, as protective agent. The re-sealing process was used as a way to prolong the releasing time of the H₂NCSNH₂ encapsulated in microcapsules. It was found that the H₂NCSNH₂ microcapsule corrosion inhibitor using PVA as a protective agent had a better releasing time. The releasing times of the H₂NCSNH₂ microcapsule corrosion inhibitors were prolonged from 18 to 48 h by re-sealing process and using PVA as a protective agent. Both the use of PVA as a protective agent and the application of the re-sealing process decreased the encapsulation efficiency of the H₂NCSNH₂. The performance parameters on protecting Q235 carbon steel from corrosion in 0.1-M H₂SO₄ solution were evaluated by polarization curve and electrochemical impedance spectra methods. The results showed that the H₂NCSNH₂ released into the solution from microcapsules could well protect Q235 carbon steel from corrosion and the corrosion-inhibiting mechanisms of it were the same as that of H₂NCSNH₂.     

Radiation-induced chemical reactions of carbon monoxide and hydrogen mixture—IV. On the water produced by the addition of small amounts of ammonia

The isotope content in water obtained from irradiated CO-H₂ mixture with added small amounts of NH₃ or their deuterated equivalents was compared. Compared with that in water obtained from CO-D₂ mixture with added NH₃, D content in water produced from the mixture with the substitution of ND₃ for NH₃ was increased remarkably. The NH₃ added to the mixture contributes to the water formation under irradiation.     

Antimony-Carbon bond activation in a Pt(II) complex: The crystal structure of [Pt(9S3)(SbPh3)(Ph)](PF6)·CH3NO2

The complex [Pt(9S3)(SbPh₃)(Ph)](PF₆) forms directly from [Pt(9S3)(SbPh₃)₂](PF₆)₂ during the room temperature crystallization of the latter in nitromethane. The crystal structure shows a five-coordinate Pt(II) center containing the tridentate thiacrown ligand, a Sb donor from the triphenylstibine ligand, and a σ-coordinating phenyl group. The phenyl group forms via Sb-C bond cleavage from one of the SbPh₃ ligands in the bis complex.     

Investigation of Electron Behavior in Nano‐TiO2 Photocatalysis by Using In Situ Open‐Circuit Voltage and Photoconductivity Measurements

The in situ open‐circuit voltages (V_oc) and the in situ photoconductivities have been measured to study electron behavior in photocatalysis and its effect on the photocatalytic oxidation of methanol. It was observed that electron injection to the conduction band (CB) of TiO₂ under light illumination during photocatalysis includes two sources: from the valence band (VB) of TiO₂ and from the methanol molecule. The electron injection from methanol to TiO₂ is slower than that directly from the VB, which indicates that the adsorption mode of methanol on the TiO₂ surface can change between dark and illuminated states. The electron injection from methanol to the CB of TiO₂ leads to the upshift of the Fermi level of electrons in TiO₂, which is the thermodynamic driving force of photocatalytic oxidation. It was also found that the charge state of nano‐TiO₂ is continuously changing during photocatalysis as electrons are injected from methanol to TiO₂. Combined with the apparent Langmuir–Hinshelwood kinetic model, the relation between photocatalytic kinetics and electrons in the TiO₂ CB was developed and verified experimentally. The photocatalytic rate constant is the variation of the Fermi level with time, based on which a new method was developed to calculate the photocatalytic kinetic rate constant by monitoring the change of V_oc with time during photocatalysis.     

Raman bandshape analysis of the symmetric bending vibration in liquid chloroform

In order to determine whether accurate rotational diffusion coefficients in liquids may be determined from the bandshapes of isotopically broadened vibrational peaks, we have investigated the isotropic and anisotropic Raman spectra of the ν₃(A₁), CCl₃ symmetric bending, vibration in CHCl₃ as a function of temperature in the liquid phase. The spectral lineshapes were fitted by a model containing four Lorentzian/Gaussian summation bands with relative peak intensities equal to the relative abundances of the four isotopic combinations and frequency displacements constrained to values measured in the matrix infrared spectrum. The calculated room temperature perpendicular diffusion coefficient, D_⊥ (25°C) = 8.310¹⁰ s⁻¹, was within the range of values reported from Raman measurements on the ν₁, symmetric carbon-hydrogen stretching, vibration, but was somewhat lower than published results from NMR relaxation time measurements, T₁(²D), on CDCl₃, and from dielectric relaxation. The activation energy, E_a(D_⊥), determined from the ν₃ bandshape measurements was 30% higher than the average value from the NMR and dielectric studies. The deviation is believed to result from the sensitivity of this quantity to the fractional Lorentzian character of the fitting functions.     

Determination of aluminium in bulk coal samples by neutron activation analysis

The determination of Al₂O₃, in bulk coal samples to an accuracy of about 0.2% Al₂O₃ has been achieved by means of a thermal-neutron activation technique based on the reaction ²⁷Al(n,γ)²⁸Al. In the analysed samples, which had widely different compositions, the Al₂O₃ concentrations ranged from 1 to 11% and the ash contents from 7 to 40%. Al₂O₃ concentrations measured by x-ray fluorescence showed a linear relationship with both the 1.78-MeV γ-ray count following the decay of ²⁸Al and the thermal-neutron count near the samples during irradiation. The linear relationship, which was obtained by regression analysis of the experimental data, determined the Al₂O₃concentrations with a standard deviation of 0.24% Al₂O₃. The particle sizes in the samples ranged from —0.5 to —40 mm, the moisture contents ranged from 1 to 6%, and the sample weights ranged from 8 to 11 kg. However, inclusion of these parameters in the regression analysis did not significantly improve the results for Al₂O₃.