Addition of ArSSAr to carbon-carbon multiple bonds using electrochemistry

ArS(ArSSAr)⁺ (arylbis(arylthio)sulfonium ions), which were generated and accumulated by the electrochemical oxidation of diaryl disulfides (ArSSAr) in CH₂Cl₂ at −78 °C, reacted with alkenes to give the corresponding diarylthio-substituted compounds in a stereospecific manner in good yields, when the reaction was quenched with a soft nucleophile, such as allylsilanes, ketene silyl acetals, and triethylamine. A mechanism involving the initial formation of an episulfonium ion followed by ring-opening by the attack of ArSSAr has been suggested. The reactions of ArS(ArSSAr)⁺ with alkynes also took place to give 1,2-diorganothio-substitued alkenes stereoselectively under similar conditions.     

On the Reaction of Triaryl Trithioarsenites, (ArS)3As,with Iodine

Iodine in dry nonprotic solvents oxidizes triaryl trithioarsenites, (ArS)₃As, to As(III) iodide, AsI₃, and disulfides, ArSSAr. The reaction most likely involves arylsulfenyl iodide, ArSI, as an intermediate. With triphenyl and tris(4-chlorophenyl) trithioarsenites, AsI₃ is prepared in very good yields. When the disulfide, which is produced, has MeCONH─ or ─NH─CMe₂─OH groups, then it acts as a Lewis base towards AsI₃ forming complexes with stoichiometry 2AsI₃·3ArSSAr. Probable coordination modes of the AsI₃ are discussed.     

Organic reactions mediated by electrochemically generated ArS+

Low-temperature electrochemical oxidation of ArSSAr was carried out to generate a pool of "ArS(+)". Spectroscopic studies ((1)H NMR and CSI-MS) of the resulting solution revealed the accumulation of ArS(ArSSAr)(+). The resulting "ArS(+)" pool reacted with alkenes and alkynes to give diarylthio-substituted products. The "ArS(+)" pool rapidly reacted with thioacetals to give the corresponding alkoxycarbenium ion pools, which reacted with various carbon nucleophiles (indirect cation pool method). The reaction of the alkoxycarbenium ion pools with stilbene derivatives in the presence of ArSSAr gave thiochroman derivatives. In addition to such stoichiometric reactions, a catalytic amount of "ArS(+)" serves as an initiator and a chain carrier of some cationic chain reactions involving intramolecular carbon-carbon bond formation. In situ generation of "ArS(+)" by electrochemical oxidation of ArSSAr with a catalytic amount of electricity in the presence of a substrate is also effective for such cationic chain reactions.     

The Autoxidation of Triaryl Trithioarsenites, (ArS)3As: Evidence for Binding and Activation of Triplet Dioxygen by Arsenic(III)

Triaryl trithioarsenites, (ArS)₃As, are oxidized by air to As ₂ O ₃ and ArSSAr. In two cases the parent “thiol” (pyrid-2-thione and 1-hydroxypyrid-2-thione) is coproduced. The oxidation, in nonprotic solvents, is favored by electron-withdrawing groups at the para position of the phenyl group. The products obtained in nonprotic solvents were rationalized by assuming that the binding of the triplet dioxygen to arsenic(III) gives a triplet diradical, (ArS) ₃ A?─O─?, or an arsenadioxirane, (ArS) ₃ As(O ₂ ), intermediate, which decomposes after nucleophilic attack by another (ArS) ₃ As molecule. In protic solvents a zwitterion, (ArS) ₃ As⁺─O─O^?, and in the presence of moisture a hydroperoxy arsenic(V) compound, (ArS)₃As(OH)─O─OH, may be intermediates in the air oxidation of some aromatic trithioarsenites. These data tend to indicate that arsenic(III) bound to suitable groups can directly bind dioxygen, a property which may have implications in chemotherapy and carcinogenesis.     

On the Reaction of Triaryl Trithioarsenites, (ArS)3As,with Octasulfur

para‐Substituted with electron donating or electron withdrawing groups triphenyl trithioarsenites, (ArS)₃As, and octasulfur in refluxing carbon disulfide or chloroform do not give the triaryl tetrathioarsenates, (ArS)₃As=S, as was claimed in the literature for tris(4‐methylphenyl) tetrathioarsenate. In some cases oxidative decomposition to As₂O₃ and disulfides ArSSAr was found. When equivalent amounts of the same esters and octasulfur were heated at 105 or 150 °C no As^V compound was detected or isolated and again some esters decomposed to As₂O₃ and disulfides. These experiments demonstrated that the aromatic trithioarsenites do not react with octasulfur, probably because they cannot open the octasulfur ring. These esters in solution react with octasulfur in the presence of a catalytic (10—20 mol%) amount of triethylamine giving disulfides, As₂O₃ and colored solids which could not be characterized.     

Zum Ionenaustausch einwertiger Kationen an synthetischen Natriumpolysilicaten mit Schichtstruktur

Ion Exchange of Monovalent Cations in Synthetic Sodium Polysilicates with Layer Structure Cation-exchange equilibria of synthetic sodium polysilicates Ilerit (Na₂O · 8.3SiO₂ 8.9 H₂O) and Magadiite (Na₂O · 13 SiO₂ · 6.8 H₂O) with H⁺, Li⁺ and K⁺ Ions were investigated with respect to their selectivity behaviour. The range of ion selectivity is: H⁺ > Na⁺ > Li⁺ > K⁺. Thermodynamic data ΔG, ΔH, and ΔS were determined by means of the integral thermodynamic equilibria constants K_th of the ion-exchange reactions.     

Reduction‐Induced Highly Selective Uptake of Cesium Ions by an Ionic Crystal Based on Silicododecamolybdate

Cation adsorption and exchange has been an important topic in both basic and applied chemistry relevant to materials synthesis and chemical conversion, as well as purification and separation. Selective Cs⁺ uptake from aqueous solutions is especially important because Cs⁺ is expensive and is contained in radioactive wastes. However, the reported adsorbents incorporate Rb⁺ as well as Cs⁺, and an adsorbent with high selectivity toward Cs⁺ has not yet been reported. Highly selective uptake of Cs⁺ by an ionic crystal (etpyH)₂[Cr₃O(OOCH)₆(etpy)₃]₂[α‐SiMo₁₂O₄₀]?3 H₂O (etpy =4‐ethylpyridine) is described. The compound incorporated up to 3.8 mol(Cs⁺) mol(s)^?1 (where s=solid) by cation‐exchange with etpyH⁺ and reduction of silicododecamolybdate with ascorbic acid. The amount of Cs⁺ uptake was comparable to that of Prussian blue, which is widely recognized as a good Cs⁺ adsorbent. Moreover, other alkali‐metal and alkaline‐earth‐metal cations were almost completely excluded (<0.2 mol mol(s)^?1).     

Characterization of aerosol nitroaromatic compounds: Validation of an experimental method

The analytical capabilities associated with the use of silylation reactions have been extended to a new class of organic molecules, nitroaromatic compounds (NACs). These compounds are a possible contributor to urban particulate matter of secondary origin which would make them important analytes due to their (1) detrimental health effects, (2) potential to affect aerosol optical properties, and (3) and usefulness for identifying PM_2.5 from biomass burning. The technique is based on derivatization of the parent NACs by using N,O‐bis‐(trimethylsilyl)‐trifluoro acetamide, one of the most prevalent derivatization reagent for analyzing hydroxylated molecules, followed by gas chromatography‐mass spectrometry using electron ionization (EI) and methane chemical ionization (CI). This method is evaluated for 32 NACs including nitrophenols, methyl‐/methoxy‐nitrophenols, nitrobenzoic acids, and nitrobenzyl alcohols. Electron ionization spectra were characterized by a high abundance of ions corresponding to [M⁺] or [M⁺ − 15]. Chemical ionization spectra exhibited high abundance for [M⁺ + 1], [M⁺ − 15], and [M⁺ + 29] ions. Both EI and CI spectra exhibit ions specific to nitro group(s) for [M⁺ − 31], [M⁺ − 45], and [M⁺ − 60]. The strong abundance observed for [M⁺] (EI), [M⁺ − 15] (EI/CI), or [M⁺ + 1] (CI) ions is consistent with the high charge stabilizing ability associated with aromatic compounds. The combination of EI and CI ionization offers strong capabilities for detection and identification of NACs. Spectra associated with NACs, containing hydrogen, carbon, oxygen, and nitrogen atoms only, as silylated derivatives show fragment/adduct ions at either (a) odd or (b) even masses that indicate either (a) odd or (b) even number of nitro groups, respectively. Mass spectra associated with silylated NACs exhibited 3 distinct regions where characteristic fragmentation with a specific pattern associated with (1) ─OH and/or ─COOH groups, (2) ─NO₂ group(s), and (3) benzene ring(s). These findings were confirmed with applications to chamber aerosol and ambient PM_2.5.     

Specific Ion Effects on an Oligopeptide: Bidentate Binding Matters for the Guanidinium Cation

Ion–protein interactions are important for protein function, yet challenging to rationalize owing to the multitude of possible ion–protein interactions. To explore specific ion effects on protein binding sites, we investigate the interaction of different salts with the zwitterionic peptide triglycine in solution. Dielectric spectroscopy shows that salts affect the peptide's reorientational dynamics, with a more pronounced effect for denaturing cations (Li⁺, guanidinium (Gdm⁺)) and anions (I^?, SCN^?) than for weakly denaturing ones (K⁺, Cl^?). The effects of Gdm⁺ and Li⁺ were found to be comparable. Molecular dynamics simulations confirm the enhanced binding of Gdm⁺ and Li⁺ to triglycine, yet with a different binding geometry: While Li⁺ predominantly binds to the C‐terminal carboxylate group, bidentate binding to the terminus and the nearest amide is particularly important for Gdm⁺. This bidentate binding markedly affects peptide conformation, and may help to explain the high denaturation activity of Gdm⁺ salts.     

Conformational Effects of [Ni2(μ‐ArS)2] Cores on Their Electrocatalytic Activity

Two nickel complexes supported by tridentate NS₂ ligands, [Ni₂(κ‐N,S,S,S′‐N^Ph{CH₂(MeC₆H₂R′)S}₂)₂] ( 1 ; R′=3,5‐(CF₃)₂C₆H₃) and [Ni₂(κ‐N,S,S,S′‐N^iBu{CH₂C₆H₄S}₂)₂] ( 2 ), were prepared as bioinspired models of the active site of [NiFe] hydrogenases. The solid‐state structure of 1 reveals that the [Ni₂(μ‐ArS)₂] core is bent, with the planes of the nickel centers at a hinge angle of 81.3(5)°, whereas 2 shows a coplanar arrangement between both nickel(II) ions in the dimeric structure. Complex 1 electrocatalyzes proton reduction from CF₃COOH at ?1.93 (overpotential of 1.04 V, with i_cat/i_p≈21.8) and ?1.47 V (overpotential of 580 mV, with i_cat/i_p≈5.9) versus the ferrocene/ferrocenium redox couple. The electrochemical behavior of 1 relative to that of 2 may be related to the bent [Ni₂(μ‐ArS)₂] core, which allows proximity of the two Ni???Ni centers at 2.730(8) Å; thus possibly favoring H⁺ reduction. In contrast, the planar [Ni₂(μ‐ArS)₂] core of 2 results in a Ni???Ni distance of 3.364(4) Å and is unstable in the presence of acid.     

Mass-selected reagent ion chemical ionization and multiple tandem mass spectrometry techniques in an ion trap mass spectrometer for structural analysis

Mass-selected reagent ion chemical ionization (CI) performed in an ion trap instrument is an efficient tool to investigate gas-phase ion reactivities and therefore to find out new and/or optimized applications for structural analysis. For instance, it was shown that the C₃H₆O^{+ .} (58 mass units) molecular ion originated from vinyl methyl ether (VME) should necessarily be used alone (i.e. unit-mass selected) to produce significant diagnostic-ions for double bond location in aliphatic alkenes. Regarding the assignment of epoxides, the previous NO⁺/CI method was adapted for an optimal use in the trap through isolation of NO⁺ cation from N₂O (instead of NO) plasma and production of the acylium diagnostic-ions via CID of [M − H]⁺ formed by NO⁺-induced hydride abstraction. New alkylation ion-products, e.g. RCH = O⁺-al , were also found to characterize isomeric epoxides as a result of either an initial electrophilic addition of the C₂H₅⁺ cation (with saturated epoxides) or a methyl-transfer from [VME]^{+ .} (with α,β-unsaturated epoxides). The multiple tandem mass spectrometry (MSⁿ) capabilities of the ion trap were essential to achieve reagent ion mass-selection, structural assignment of the diagnostic-ions, or to provide further selectivity. © 1997 John Wiley & Sons, Ltd.     

Ejection of Cluster Ions from a Liquid Beam of an Aniline-Propanol Solution Following Laser Photoionization

A simple technique of preparing a continuous laminar liquid flow in vacuum (liquid beam) was developed and combined with multiphoton ionization and a time-of-flight mass spectrometer. This technique was applied to the study on resonance photoionization of an aniline (AN)-propanol (PrOH) solution (0.1 – 0.3 M). Binary cluster ions of aniline and propanol, AN⁺(PrOH)_n (n ≤ 1), and protonated propanol cluster ions, H⁺(PrOH)_n (n ≤ 1), were observed as product ions in the gas phase. The relative intensities of AN⁺PrOH and those of H⁺(PrOH)₂ were measured as functions of the excitation laser power and the concentration of aniline in the propanol solution. The dependences of the ion intensities on the laser power and the AN concentration are explained in terms of a Coulomb ejection model, where the ions are ejected from the surface by Coulomb repulsion exerted from neighboring ions. It is also concluded that H⁺(PrOH)_n is produced by a proton transfer reaction from an aniline ion to solvent molecules in the solution.     

Wellenmechanische Untersuchungen an der Wasserstoffbrücke zwischen zwei Berylliumatomen

The systems Be₂H⁺ and Be₂H^? have been investigated for different nuclear positions, the H atom being situated between the Be atoms, taking all electrons into account, using the Allgemeines Programmsystem/SCF –MO –LC (LCGO ) Verfahren. For Be₂H⁺ there results a minimum total energy of ?29.3824 a.u. in the linear symmetric configuration with a bond distance of 1.609 Å. The ionization energy was estimated to be 12.37 eV. The formation of Be₂H⁺ can be interpreted as an addition of Be to BeH⁺ with an exotherm heat of reaction of 7.0 kcal/mole. The electron affinity of BeH⁺ (ionization energy of BeH) was estimated to be approximately 7.24 eV. All force constants of Be₂H⁺ and BeH⁺ have been computed. Using SCF results, the Be₂H^? was found to be unstable.     

Calix[4]arene-based fluorescent probe and the adsorption capacity of its electrospun nanofibrous film for the cesium cation as an adsorbent

Calix[4]arene-based cation receptor 1 has been synthesised by following a multi-step synthetic procedure. The fluorescence properties of 1 upon the addition of various metal ions were investigated by fluorescence spectroscopy. As a result, it was revealed that 1 displayed dramatic quenching effect upon the exposure to Cs⁺. In contrast, no significant quenching effects were observed upon the addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ag⁺, Zn²⁺ and Ni²⁺. Compound 1 was also found by Job plot to form a 1:1 complex with Cs⁺. In addition, we also prepared 1-embedded electrospun nanofibrous film (NF-1) as an adsorbent for Cs⁺. NF-1 is proved to adsorb Cs⁺ effectively from an aqueous solution, indicating that it would be usefully utilised as an adsorbent to remove Cs⁺.     

Synthesis and metal ion complexation of spin labeled 18-crown-6 ethers containing an acridone or an acridine fluorophore unit

Double (spin and fluorescence) labeled pyrroline derivatives of crown ethers containing an acridone or an acridine fluorophore unit (1 and 2) and their diamagnetic analogues (3 and 4) were synthesized. Their fluorescent behavior as well as their complexation properties toward selected metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺) were examined.     

Group IVB organometallic sulphides : VIII. Reaction of triorgano-germanium and -tin aryl sulphides with oxidants. some reactions of triorgano-germanium and -tin aryl o-sulphinates with sulphur halides

R₃SnSAr are oxidised by H₂O₂, 2,4,4,6-tetrabromocyclohexa-2,5-dienone and NaIO₄ (in 1 : 1 ratio) to disulphides, ArSSAr. With NaIO₄ as the oxidant, Ph₃SnSAr, gives a complex triphenyltin periodate; however, with the other two oxidants, (Ph₃Sn)₂O is produced. Ph₃GeSAr was oxidised by NaIO₄ to (Ph₃Ge)₂O and ArSSAr.Triorgano-germanium and -tin O-sulphinates, R₃MOSOAr react with arenesulphenyl chlorides, ArSCl, giving thiosulphonates, ArSS(O₂)Ar, and with sulphur dichloride, producing di(sulphonyl) sulphides ArS(O₂)SS(O₂)Ar. Triorgano-germanium p-toluene sulphonate readily formed by oxidation of the O-sulphinate derivative, does not react with arenesulphenyl chlorides.     

Spatial correlations of ions in nanoclusters of an aqueous solution of NaCl

The Monte Carlo method is used to calculate the radial distribution functions (RDFs) of Na⁺Cl^?, Na⁺Na⁺, and Cl^?Cl^? ion pairs in water clusters that differ both in composition and size. An analysis of the RDFs shows that like-charged ions can approach one another at extremely small distances (direct ion contact) without the participation of a third ion of the opposite sign. The Na⁺Na⁺ (interionic distance 3.5 Å) and Cl^?Cl^? (interionic distance 5.25 Å) ion pairs are most likely to form in very dilute solutions. The composition of ionic associates changes with increasing concentration of ions in the solution (it is indicated by the emergence of the RDF peak at 4.25 Å and its further growth with concentration and by a selective visual analysis of instantaneous cluster configurations) so that groups of three, five, etc. ions of the opposite sign bearing a net charge of 1+ or 1? appear.     

The Existence of an Isolated Hydronium Ion in the Interior of Proteins

Neutron diffraction analysis studies reported an isolated hydronium ion (H₃O⁺) in the interior of d ‐xylose isomerase (XI) and phycocyanobilin‐ferredoxin oxidoreductase (PcyA). H₃O⁺ forms hydrogen bonds (H‐bonds) with two histidine side‐chains and a backbone carbonyl group in PcyA, whereas H₃O⁺ forms H‐bonds with three acidic residues in XI. Using a quantum mechanical/molecular mechanical (QM/MM) approach, we analyzed stabilization of H₃O⁺ by the protein environment. QM/MM calculations indicated that H₃O⁺ was unstable in the PcyA crystal structure, releasing a proton to an H‐bond partner His88, producing H₂O and protonated His88. On the other hand, H₃O⁺ was stable in the XI crystal structure. H‐bond partners of isolated H₃O⁺ would be practically limited to acidic residues such as aspartic and glutamic acids in the protein environment.     

Z-discrimination avoidance in mass-analysed ion kinetic energy spectral studies performed on an unmodified ZAB-E mass spectrometer

A method is introduced by which mass-analysed ion kinetic energy spectra free from Z-discrimination can be obtained for both collisionally activated (CA) and metastable decomposition reactions. The method, performed on a ZAB-E instrument fitted with a collision cell, but applicable also to the ZAB-2F, involves summation of the ‘height resolved’ contributions (formed by beam collimation in the Z-axis and selected by electrostatic deflection of the incident beam) using the signal averaging facility normally available. Representative results (at 8 or 10 keV energy) are given for the CA (Ar target) reactions [CS₂]²⁺ → [CS]⁺; [CS₂]⁺ → S⁺ and [CH₃OH]⁺ → [m/z = 12–31]⁺, and for the metastable reaction [m/z 45]⁺ → [m/z 29]⁺ in ethanol.     

Reduction of copper(II) complexes by electron capture in an electrospray ionization source

The relative proportion of 1:1 Cu(I)– and Cu(II)–peptide complexes PeptCu(I)⁺ and [Pept?H+Cu(II)]⁺ yielded by electrospray ionization of copper sulfate and GlyHisLys solutions in water/methanol was examined under different source conditions. Two factors leading to an increase in Cu(I) complex ratio were found. (1) Increase of nozzle–skimmer voltages caused collision-induced dissociation of Cu(II) complexes, and most probably favor ligand-to-metal electron transfers that result in the decoordination of oxydated ligands to form PeptCu⁺. (2) Independent of these “innersphere” processes that involve only electron exchange inside the coordination sphere around the metal cation, an increase in source voltages with a concomitant increase of current and, supposedly, electron counterflow between the counterelectrode and the capillary caused an increase in PeptCu⁺ relative proportion. The hypothesis that an “outersphere” electron capture might happen in these conditions was verified by using discharge supressing SF₆ gas as nebulizing gas. The electronegative gas reduced the current brought on by high voltages and inhibited the PeptCu⁺ increase phenomenon.