Mid-wave infrared liquid crystal shutter for breathalyzer applications

There exists a problem with an in situ diagnostics of contamination of ethyl alcohol in a human being exhaled air. When ethyl alcohol in a mouth blowing (in a gaseous state) exists, the characteristic CH stretch absorption bands in CH₃ and CH₂ functional groups in ethanol (CH₃CH₂OH) appear at a wavelength of λ = 3.42 μm. To investigate the presence of ethyl alcohol in exhaled human air, the light beam of λ = 3.42 μm is passing through an air sample. If one alternately measures the intensity of the investigated beam and the reference, a percentage of ethanol in the air sample can be estimated using a sensitive nondispersive infrared (NDIR) system with a stable operating flow mass detector. To eliminate a mechanical chopper and noise generating stepper motors, a photonic chopper as a liquid crystal shutter for λ = 3.42 μm has been designed. For this purpose, an innovative infrared nematic liquid crystal mixture was intentionally prepared. The working mixture was obtained by a selective removal of CH bonds and its exchange by heavier polar substituents, what ensures a lack of absorption band of CH bonds. The paper presents theory, concept and final experimental results of the infrared nematic liquid crystals mixture and the liquid crystal shutter for breathalyzer applications.     

Dimethyl methylphosphonate decomposition on fully oxidized and partially reduced ceria thin films

The thermal decomposition of dimethyl methylphosphonate (DMMP) on crystalline ceria thin films grown on Ru(0 0 0 1) was studied by temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS) and infrared absorption reflection spectroscopy (IRAS). TPD experiments show that methanol and formaldehyde desorb as the two main products at 575 K, while water, formaldehyde and CO are produced above 800 K. IRAS studies demonstrate that DMMP adsorbs via the phosphoryl oxygen at 200 K, but the PO bond converts to a bridging OPO species at 300 K. DMMP decomposition initially occurs via POCH₃ bond scission to form methyl methylphosphonate (MMP) and methyl phosphonate (MP) between 300 and 500 K; XPS and IRAS data are consistent with a methoxy intermediate on the surface at these temperatures. The more stable PCH₃ bonds remain intact up to 700 K, and the only surface intermediate at higher temperatures is believed to be PO_x. Although the presence of PO_x decreases activity for DMMP decomposition, some activity on the ceria surface remains even after 7 cycles of adsorption and reaction. The ceria films become reduced by multiple DMMP adsorption-reaction cycles, with the Ce⁺⁴ content dropping to 30% after seven cycles. Investigations of DMMP reaction on reduced ceria surfaces show that CO and H₂ are produced in addition to methanol and formaldehyde. Furthermore, DMMP decomposition activity on the reduced ceria films is almost completely inhibited after only 3 adsorption-reaction cycles. Similarities between DMMP and methanol chemistry on the ceria films suggest that methoxy is a key surface intermediate in both reactions.     

Determination of nitrofurans in feeds based on silver nanoparticle-catalyzed chemiluminescence

A highly sensitive chemiluminescence (CL) method for the determination of nitrofurans (NFs) was developed based on the enhancement of CL intensity of luminol–H₂O₂–NFs system by silver nanoparticles (AgNPs). It was supposed that the oxygen-related radicals of OH and superoxide radical (O₂^?) could be produced when NFs reacted with H₂O₂. Furthermore, the enhancement mechanism was originated from the reinforcer of AgNPs, which could catalyze the generation of the OH radical. Then OH radicals reacted with luminol anion and HO₂^? to form luminol radical (L^?) and O₂^?. The excited state 3-aminophthalate anion was obtained in the reaction of L^? and O₂^?, which was the emitter (luminophor) in the luminol–H₂O₂ CL reaction system and the maximal emission of the CL spectrum was at 425 nm. The experiments of scavenging oxygen-related radicals were done to confirm these reactive oxygen species participated in the CL reaction. The limits of detection (LOD) (S/N=3) were 8×10^?7 g mL^?1 for furacilin, 8×10^?8 g mL^?1 for furantoin, 4×10^?8 g mL^?1 for furazolidone and 2×10^?7 g mL^?1 for furaltadone. The proposed method was successfully applied to the determination of NFs in feeds and pharmaceutical samples.     

Reflection absorption infrared spectroscopy analysis of the evolution of ErSb on InSb

We discuss an ex-situ monitoring technique based on glancing-angle infrared-absorption used to determine small amounts of erbium antimonide (ErSb) deposited on an indium antimonide (InSb) layer epitaxially grown on an InSb (100) substrate by low pressure metal organic chemical vapor deposition (MOCVD). Infrared absorption from the indium–hydrogen (InH) stretching mode at 1754.5 cm^? 1 associated with a top most surface of an epitaxial InSb layer was used to compare varying levels of surface coverage with ErSb. Among four samples of varying coverage of ErSb deposition (7.2 to 21.5 monolayers), detected infrared absorption peaks distinct to InH weakened as ErSb surface coverage increased. In the early stage of ErSb deposition, our study suggests that outermost indium atoms in the InSb buffer layer are replaced by Er resulting in increase in absorption associated with the InH mode. Using this simple ex-situ technique, we show that it is possible to calibrate the amount of ErSb deposited atop each individual InSb substrate for depositions of few to tens of monolayers.     

Unusual oxygen re-equilibration kinetics of TiO2−δ

Oxygen re-equilibration kinetics, along with the equilibrium conductivity, have been measured on undoped, single-crystal TiO_2−δ, by a four-probe d.c. conductivity relaxation technique, against oxygen partial pressure in the range of − 16 < log(P_O2/atm) ≤ 0 at different temperatures in the range of 1173 ≤ T/K ≤ 1373. The isothermal conductivity varies as σ ∝ P_O2^m with m ≈ − 1/4, − 1/5 and − 1/6 in turn with increasing P_O2 up to 1 atm, suggesting a sequential variation of the majority ionic disorder types from Ti_i to Ti_i to V_O, respectively. Contrary to the conventional knowledge that due to the local (defect) equilibrium postulate there should be one and only one chemical diffusivity or single relaxation time for a binary oxide, the oxygen re-equilibration kinetics has turned out to be twofold with two different relaxation times depending on oxygen activities. This is interpreted as being due to the independent relaxation of each sublattice of TiO₂ in an oxygen activity gradient applied, indicating a failure of local equilibrium during oxygen re-equilibration. From the two different relaxation times the chemical diffusion coefficients of component Ti and O are separately evaluated and subsequently, their self-diffusion coefficients. The latter are found to be in a good agreement with the literature data.     

Nb 3d and O 1s core levels and chemical bonding in niobates

A set of available experimental data on binding energies of Nb 3d_5/2 and O 1s core levels in niobates has been observed with using energy difference (O 1sNb 3d_5/2) as a robust parameter for compound characterization. An empirical relationship between (O 1sNb 3d_5/2) values measured with XPS for Nb⁵⁺-niobates and mean chemical bond length L(NbO) has been discussed. A range of (O 1sNb 3d_5/2) values possible in Nb⁵⁺-niobates has been defined. An energy gap ∼1.4–1.8 eV is found between (O 1sNb 3d_5/2) values reasonable for Nb⁵⁺ and Nb⁴⁺ states in niobates.     

Time-evolution of thermal oxidation on high-index silicon surfaces: Real-time photoemission spectroscopic study with synchrotron radiation

The initial oxidation on high-index silicon surfaces with (113) and (120) orientations at 820 K has been investigated by real-time X-ray photoemission spectroscopy (Si 2p and O 1s) using 687 eV photons. The time evolutions of the Siⁿ⁺ (n = 1–4) components in the Si 2p spectrum indicate that the Si^2 + state is suppressed on high-index surfaces compared with Si(001). The O 1s state consists of two components, a low-binding-energy component (LBC) and a high-binding-energy component (HBC). It is suggested that the O atom in strained SiOSi contributes to the LBC component. The reaction rates are slower on high-index surfaces compared with that on Si(001).     

Infrared diode laser spectroscopy of N212C18O2

The high-resolution infrared spectrum of N₂¹²C¹⁸O₂ has been observed in the ν₃ band (2314 cm^?1) region of ¹²C¹⁸O₂ with diode laser absorption spectroscopy of pulsed molecular beam. The geometry of N₂¹²C¹⁸O₂ is similar to N₂¹²C¹⁶O₂, a T-shaped structure with the nitrogen molecular axis pointing towards the carbon atom. The geometrical parameters of the T-shaped ground-state structure are determined as R_NcmC = 3.7285(5) Å and (90?Θ_NcmCO) = 6.85(3)°. The vibrational band origin of N₂¹²C¹⁸O₂ corresponding to the ν₃ mode of ¹²C¹⁸O₂ shows a shift of 0.52499(10) cm^?1 with respect to that of ¹²C¹⁸O₂.     

Theoretical estimation of the temperature and pressure within collapsing acoustical bubbles

Formation of highly reactive species such as OH, H, HO₂ and H₂O₂ due to transient collapse of cavitation bubbles is the primary mechanism of sonochemical reaction. The crucial parameters influencing the formation of radicals are the temperature and pressure achieved in the bubble during the strong collapse. Experimental determinations estimated a temperature of about 5000 K and pressure of several hundreds of MPa within the collapsing bubble. In this theoretical investigation, computer simulations of chemical reactions occurring in an O₂-bubble oscillating in water irradiated by an ultrasonic wave have been performed for diverse combinations of various parameters such as ultrasound frequency (20–1000 kHz), acoustic amplitude (up to 0.3 MPa), static pressure (0.03–0.3 MPa) and liquid temperature (283–333 K). The aim of this series of computations is to correlate the production of OH radicals to the temperature and pressure achieved in the bubble during the strong collapse. The employed model combines the dynamic of bubble collapse in acoustical field with the chemical kinetics of single bubble. The results of the numerical simulations revealed that the main oxidant created in an O₂ bubble is OH radical. The computer simulations clearly showed the existence of an optimum bubble temperature of about 5200 ± 200 K and pressure of about 250 ± 20 MPa. The predicted value of the bubble temperature for the production of OH radicals is in excellent agreement with that furnished by the experiments. The existence of an optimum bubble temperature and pressure in collapsing bubbles results from the competitions between the reactions of production and those of consumption of OH radicals at high temperatures.     

Passivation effect of allylamine molecule on the electronic structure of a Si(001) − (2 × 1) surface

The chemisorption of the allylamine molecule, which contains two functional groups (ethenyl and hydroxyl), on a Si(001) ? (2 × 1) surface was studied using density functional theory (ab-initio DFT) based on the pseudopotential approach. In particular, we focused on the determination of the most stable position of the CC double bond in the ethenyl group and observation of the passivation effect of allylamine on the electronic structure of the clean Si(001) ? (2 × 1) phase. For this purpose, all of the possible interaction mechanisms occurring at the interface were considered: (i) dissociative bonding where the CC bond is parallel to the silicon surface, (ii) dissociative bonding where the CC bond is perpendicular to the silicon surface, and (iii) the [2 + 2] CC cycloaddition reaction. From our total energy calculations, it was found that the bifunctional allylamine molecule attached to the Si(001) ? (2 × 1) surface through the amino functional group, by breaking the N–H bond and forming a Si–H bond and Si–NHCH2CHCH2 surface fragments. During this process, the ethenyl functional group remains intact, and so can be potentially used as an extra reactive site for additional chemical interactions. In addition to these findings, the nudged elastic band method (NEB) calculations related with the reaction paths showed that the parallel position of the CC bond with respect to the surface of the substrate is more favorable. In order to see the influence of the chemisorbed allylamine molecule on the surface states of the clean Si(001) – (2 × 1), we also plotted the density of states (DOS), in which it is seen that the clean Si(001) – (2 × 1) surface was passivated by the adsorption of allylamine.     

Extrinsic fluorescence as a sensitive method for studying photo-degradation of high density polyethylene part I

Artificial ageing of high density polyethylene (HDPE) exposed to ultra-violet irradiation has been investigated by fluorescence spectroscopy. In the case of HDPE, fluorescence spectroscopy requires the addition of fluorophore, (rhodamine 101 laser dye). The spectral features of fluorescence are very sensitive to the interaction between the exited molecules and the polymer matrix. Under wavelength close to 254 nm, the diffusion of oxygen can introduce groups such as CO, CO and C(O)O into the molecular chains. Thus entail structural and chemical modifications such as polymeric chain breaking, cross linking and oxidation. In the present work, we clearly illustrate the fact that fluorescence spectroscopy is very worthwhile in particular to follow the early stages of photo-degradation.     

Nonstoichiometry of the perovskite-type solid solution La0.9Ca0.1Cr1−yAlyO3−δ

Nonstoichiometry of the perovskite-type solid solutions La_0.9Ca_0.1Cr_1−yAl_yO_3−δ was studied by high-temperature gravimetry under controlled P(O₂) atmospheres of 1–10^− 23 bar at 1073–1273 K. The observed data were described by a regular solution-like model for the randomly distributed defects of V_O¨, Cr_Cr., Ca_La,, and Al_Cr^X. With the increase in y, V_O¨ formation becomes much easier. For y > 0.8, some fraction of Ca_La, becomes surrounded only by Al_Cr^X and V_O¨ remains around such Ca_La, up to high P(O₂) to reduce the maximum oxygen content below 3.000.     

Growth and vibrational properties of MnOx thin films on Rh(111)

The growth, structures, and vibrational properties of ultrathin manganese oxide films on Rh(111) had been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), low energy ion scattering spectroscopy (LEIS) and Auger electron spectroscopy (AES). MnO_x grew in a layer-by-layer fashion on the Rh(111) surface. HREELS phonon features and XPS binding energies showed that an OMnO like tri-layer formed initially. Which was stable on the Rh(111) surface with MnO_x coverage less than one monolayer. At above one monolayer, Mn₃O₄ was preferred as indicated from a four-phonon feature peaked at 13.3, 39, 68 and 83 meV in HREELS. Higher temperature oxidation and annealing were found to improve the long-range order of the MnO_x films.     

Growth and ordering of CuO chains on Ag(110) surface

Growth of CuO chains and their ordering on Ag(110) surface were monitored by scanning tunneling microscopy (STM). When Cu atoms were deposited on a (2 × 1)AgO/Ag(110) surface at room temperature, the AgO chains in the [001] direction diminished and new strings of CuO grew along the [110] direction and yield a (2 × 2) p2mg ordering. When a Ag(110) surface with coexisting AgO and CuO chains was exposed to CO at room temperature, the AgO chains were selectively reduced.     

Enhanced activity for supported Au clusters: Methanol oxidation on Au/TiO2(110)

Gold clusters supported on TiO₂(110) exhibit unusual activity for the oxidation of methanol to formaldehyde. Temperature programmed desorption studies of methanol on Au clusters show that both Au and titania sites are necessary for methanol reaction. Isotopic labeling experiments with CD₃OH demonstrate that reaction occurs via OH bond scission to form a methoxy intermediate. When the TiO₂ surface is oxidized with ¹⁸O₂ before or after Au deposition, methanol reaction produces H₂¹⁸O below 300 K, indicating that oxygen from titania promotes OH bond scission and is incorporated into desorbing products. XPS experiments provide additional evidence that during methanol reaction on the Au/TiO₂ surface, methanol adsorption occurs on TiO₂, given that the titania support becomes slightly oxidized after exposure to methanol in the presence of Au clusters. While the role of TiO₂ is to dissociate the OH bond and form the reactive methoxy intermediate, the role of the Au sites is to remove hydrogen from the surface as H₂, thus preventing the recombination of methoxy and hydrogen to methanol. The decrease in formaldehyde yield with increasing Au coverage above 0.25 ML suggests that reaction occurs at Au–titania interfacial sites; scanning tunneling microscopy images of various Au coverages confirm that the number of interfacial sites at the perimeter of the Au clusters decreases as the Au coverage is increased between 0.25 and 5 ML.     

Efficient sonochemical degradation of perfluorooctanoic acid using periodate

A rapid and efficient treatment method, using periodate (PI) for sonochemical oxidation of persistent and bioaccumulative perfluorooctanoic acid (PFOA) was developed. With an addition of 45 mM PI, 96.5% of PFOA was decomposed with a defluorination efficiency of 95.7% after 120 min of ultrasound (US). The removals of PFOA were augmented with an increase in PI doses. In all the PI + US experimental runs, decomposition efficiencies were essentially similar to those of defluorination, indicating that PFOA was decomposed and mineralized into fluoride ions. Lower solution pHs resulted in an increase in decomposition and defluorination efficiencies of PFOA due to acid-catalyzation. Dissolved oxygen increased the amount of IO₄ radicals produced, which consumed the more effective IO₃ radicals. Consequently, presence of oxygen inhibited the destruction of PFOA. The PFOA degradation rates with different gases sparging are in the following order: nitrogen > air > oxygen. Effects of anions follow the Hofmeister effects on PFOA degradation (i.e., Br⁻ > none ⩾ Cl⁻ > SO₄²⁻). Br⁻ could react with OH to yield radical anion Br₂⁻ that enhances the PFOA degradation. A reaction pathway was also proposed to describe the PI oxidation of PFOA under US irradiation.     

Thermal activation and reaction of allyl alcohol on Ni(100)

The thermal chemistry of allyl alcohol (CH₂CHCH₂OH) on a Ni(100) single-crystal surface was studied by the temperature programmed desorption (TPD) and the X-ray photoelectron spectroscopy (XPS). The allyl alcohol adsorbs molecularly on the metal surface at 100 K. Intact molecular desorption from the surface occurs at temperatures around 180 K, but some molecules exhibit chemical reactivity on the surface: activation of the OH, CC, and CO bonds produces η¹(O)-allyloxy CH₂CHCH₂O_(a), η²(C, C) allyl alcohol (C_(a)H₂C_(a)HCH₂OH), and η³(C, C, O)-alkoxide (C_(a)H₂C_(a)CH₂ O_(a)) intermediates. Further thermal activation of allyl alcohol on the surface yields propylene (CH₂CHCH₃), 1-propanol (CH₃CH₂CH₂OH), propanal (CH₃CH₂CHO), and combustion and dehydrogenation products (H₂O, H₂, and CO). Propylene desorbs from the surface at temperatures of around 270 K. Hydrogenation to the η³(C, C, O)-alkoxide intermediate leads to the production of propanal which desorbs from the surface around 320 K, while hydrogenation of the η²(C, C) allyl alcohol intermediate produces 1-propanol, which desorbs at around 310 K. The co-adsorption of hydrogen atoms on the surface enhances the formation of the saturated alcohol, while co-adsorption of oxygen enhances the formation of both the saturated alcohol and the saturated aldehydes.     

Sensitivity of free radicals production in acoustically driven bubble to the ultrasonic frequency and nature of dissolved gases

Central events of ultrasonic action are the bubbles of cavitation that can be considered as powered microreactors within which high-energy chemistry occurs. This work presents the results of a comprehensive numerical assessment of frequency and saturating gases effects on single bubble sonochemistry. Computer simulations of chemical reactions occurring inside a bubble oscillating in liquid water irradiated by an ultrasonic wave have been performed for a wide range of ultrasonic frequencies (213–1100 kHz) under different saturating gases (O₂, air, N₂ and H₂). For O₂ and H₂ bubbles, reactions mechanism consisting in 25 reversible chemical reactions were proposed for studying the internal bubble-chemistry whereas 73 reversible reactions were taken into account for air and N₂ bubbles. The numerical simulations have indicated that radicals such as OH, H, HO₂ and O are created in the bubble during the strong collapse. In all cases, hydroxyl radical (OH) is the main oxidant created in the bubble. The production rate of the oxidants decreases as the driving ultrasonic frequency increases. The production rate of OH radical followed the order O₂ > air > N₂ > H₂ and the order becomes more remarkable at higher ultrasonic frequencies. The effect of ultrasonic frequency on single bubble sonochemistry was attributed to its significant impact on the cavitation process whereas the effects of gases were attributed to the nature of the chemistry produced in the bubble at the strong collapse. It was concluded that, in addition to the gas solubility, the nature of the internal bubble chemistry is another parameter of a paramount importance that controls the overall sonochemical activity in aqueous solutions.     

Structural characteristics of mixed oxides MOx/SiO2 affecting photocatalytic decomposition of methylene blue

A series of photocatalysts based on silica (nanoparticulate) supported titania, ceria, and ceria/zirconia were synthesized and characterized by a variety of techniques including surface area measurements, X-ray diffraction, Fourier transform infrared spectroscopy, zeta potential, surface charge density, and photocatalytic behavior toward methylene blue decomposition. Thermal treatment at 600 °C increases the anatase content of the titania based catalysts detected by XRD. Changes in the infrared spectra before and after thermal treatment indicate that at low temperature there are more SiOTi bonds than at high temperature. As these bonds break upon heating the SiO₂ and TiO₂ separate, allowing the TiO₂ anatase phase to form. This results in an increased catalytic activity for the thermally treated samples. Nearly all titania based samples exhibit a negative surface charge density at pH 7 (initial pH of photocatalytic studies) which aids adsorption of methylene blue. The crystallinity of ceria and ceria/zirconia based catalysts are in some cases limited, and in others non-existent. Even though the energy band gap (E_g) can be lower for these catalysts than for the titania based catalysts, their photocatalytic properties are inferior.     

Crystal growth and characterization of an NLO organic crystal: N′-[(Z)-(4-methylphenyl)methylidene]-4-nitrobenzohydrazide

In this paper, we report the synthesis, growth and characterization of a new organic NLO single crystal of NMPMN (N′-[(Z)-(4-methylphenyl)methylidene]-4-nitrobenzohydrazide), for the first time. The single crystal was grown by slow evaporation method at room temperature. The cell dimensions obtained by single crystal XRD studies reveal that the crystal belongs to triclinic system. It was characterized by different techniques like powder XRD, UV, FTIR, TGA and DSC. The Knoop microhardness test was carried out to measure the mechanical strength of the crystal. Its refractive index was determined by the Brewster’s angle method. The laser damage threshold studies have been carried out for the crystal using a Q-switched Nd:YAG laser of ns pulses at a wavelength of 532 nm. The Kurtz Powder Second Harmonic Generation revealed that the SHG efficiency of the grown crystal is about 50% that of KDP and is found to be phase matchable. The intermolecular OH⋯O, OH⋯N and CH⋯O hydrogen bonds and a π–π stacking interaction between the nitrobenzene and tolyl rings helps to create a delicate balance between the molecular and supramolecular charge transfer processes by creating a noncentrosymmetric structure.