Solubilities of l-glutamic acid, 3-nitrobenzoic acid,p-toluic acid,calcium-l-lactate,calcium gluconate,magnesium-dl-aspartate,and magnesium-l-lactate in water

Solubilities of l -glutamic acid, 3-nitrobenzoic acid, p -toluic acid, calcium-l -lactate, calcium gluconate, magnesium- dl -aspartate, and magnesium- l -lactate in water were determined in the temperature range 278 K to 343 K. The apparent molar enthalpies of solution at T =  298.15 K as derived from these solubilities areΔ_solH_m (l -glutamic acid,m_sat =  0.0565 mol · kg ^− 1)  =  30.2 kJ · mol ^− 1,Δ_solH_m (3-nitrobenzoic acid, m =  0.0188 mol · kg ^− 1)  =  28.1 kJ · mol ^− 1, Δ_solH_m( p - toluic acid, m =  0.00267 mol · kg ^− 1)  =  23.9 kJ · mol ^− 1,Δ_solH_m (calcium- l -lactate tetrahydrate,m =  0.2902 mol · kg ^− 1)  =  25.8 kJ · mol ^− 1,Δ_solH_m (calcium gluconate, m =  0.0806 mol · kg ^− 1)  =  22.1 kJ · mol ^− 1, Δ_solH_m(magnesium-dl -aspartate tetrahydrate, m =  0.1469 mol · kg ^− 1)  =  11.5 kJ · mol ^− 1, andΔ_solH_m (magnesium- l -lactate trihydrate,m =  0.3462 mol · kg ^− 1)  =  3.81 kJ · mol ^− 1.     

Volumetric properties of aqueous solutions of glutaric acid

Densities of aqueous solutions with molalities up to 6 mol · kg⁻¹ were determined at 5 K temperature intervals, from T = 288.15 K to T = 333.15 K. Densities served to evaluate the apparent molar volumes, V_2,ϕ(m, T), the cubic expansion coefficients, α(m, T), and the changes of isobaric heat capacities with respect to pressure, (∂C_P/∂P)_T,m. They were qualitatively correlated with the changes in the structure of water when glutaric acid is dissolved in it.     

Structural effects on the oxidation of formic acid on the high index planes of palladium

Electrochemical oxidation of formic acid has been studied on the stepped and kinked-stepped surfaces of Pd in 0.1 M HClO₄ containing 0.1 M formic acid with the use of voltammetry. The surfaces examined are Pd(S)-[n(1 0 0) × (1 1 0)], Pd(S)-[n(1 1 1) × (1 0 0)] and Pd(S)-[n(1 1 1) × (1 1 1)] series (n = 2–9). The results are compared with those of Pd(S)-[n(1 0 0) × (1 1 1)] series reported previously. All the electrodes give maximum currents of formic acid oxidation j_P between 0.5 and 0.8 V (RHE). The values of j_P plotted against the density of step (kink) atoms d_S depend on the surface structure remarkably. Pd(S)-[n(1 1 1) × (1 0 0)] surfaces provide maximum of j_P at n = 5, whereas Pd(S)-[n(1 0 0) × (1 1 0)] and Pd(S)-[n(1 1 1) × (1 1 1)] do not give maximum of j_P. The values of j_P have the following order: Pd(S)-[n(1 1 1) × (1 1 1)] < Pd(S)-[n(1 1 1) × (1 0 0)] < Pd(S)-[n(1 0 0) × (1 1 0)] < Pd(S)-[n(1 0 0) × (1 1 1)]. The anodic current at more negative potential 0.20 V (RHE) shows different activity series: Pd(1 1 1) and Pd(1 1 0) have the highest rate for formic acid oxidation at 0.20 V (RHE).     

Preparation and thermal properties of lanthanide complexes with 2,3-dichlorobenzoic acid and 1,10-phenanthroline

Three lanthanide complexes with a general formula [Ln(2,3-DClBA)₃phen]₂ (Ln(III) = Eu(1), Tb(2), Ho(3); 2,3-DClBA = 2,3-dichlorobenzoate; phen = 1,10-phenanthroline) were synthesized and characterized by elemental analysis, molar conductance, infrared and ultraviolet spectra and powder X-ray diffraction (XRD). The luminescent properties of the complexes 1 and 2 were studied. The thermal behaviors of the complexes were also discussed by thermogravimetric (TG), differential thermogravimetric (DTG) and infrared spectra (IR) techniques. The heat capacities of the complexes were measured from 259.15 to 493.02 K by means of Differential scanning calorimeter (DSC). The dependence of heat capacity on the reduce temperature x (x = [T ? (T_max + T_min)/2]/[(T_max ? T_min)/2]) was fitted to a polynomial equation with the least squares method for each complex. Furthermore, based on the fitted polynomial, the smoothed heat capacities and the derived thermodynamic functions (H_T ? H_298.15 K), (S_T ? S_298.15 K) and (G_T ? G_298.15 K) in the measured temperature range were obtained with an interval of 10 K.     

Density and activity of pertechnetic acid aqueous solutions at T = 298.15 K

The previous isopiestic investigations of HTcO₄ aqueous solutions at T = 298.15 K are believed to be unreliable, because of the formation of a ternary mixture at high molality. Consequently, published isopiestic molalities for aqueous HTcO₄ solutions at T = 298.15 K were completed and corrected. Binary data (variation of the osmotic coefficient and activity coefficient of the electrolyte in solution in the water) at T = 298.15 K for pertechnetic acid HTcO₄ were determined by direct water activity measurements. These measurements extend from molality m = 1.4 mol · kg⁻¹ to m = 8.32 mol · kg⁻¹. The variation of the osmotic coefficient of this acid in water is represented mathematically. Density variations at T = 298.15 K are also established and used to express the activity coefficient values on both the molar and molal concentration scale. The density law leads to the partial molar volume variations for aqueous HTcO₄ solutions at T = 298.15 K, which are compared with published data.     

Electrochemical kinetic study of surface layer growth on natural pyrite in acid medium

This paper presents electrochemical experiments on natural pyrite that combine potentiostatic and voltammetric techniques. X-ray microanalysis is used as an auxiliary technique. The layer growth on pyrite surface is conducted in a wide range of pH and potential range: 3.4 ≤ pH ≤ 5.9 with E = 0.80 V (versus SHE), and 0.80 V ≤ E ≤ 1.00 V with pH 4.5 (versus SHE) in acetic acid–acetate buffer. This work is unique for two reasons: (1) phenomenological model about layer growth is applied and mathematical-physic consistence is verified and (2) Meyer's hypotheses of chemical mechanism are used to explain kinetic parameters of the phenomenological model.     

Standard Gibbs energy of formation of platinic acid H2Pt(OH) 6in the crystalline state

Heat capacity of platinic acid, hydrogen hexahydroxyplatinate(IV)H₂Pt(OH)₆ , was measured from T =  7 K toT =  310 K by means of adiabatic calorimetry. The standard entropy and the standard Gibbs energy of formation of platinic acid in the crystalline state were determined to be 176.5  ±  3.6 J · K ^− 1· mol ^− 1and  − 988.8  ±  3.8 kJ · mol ^− 1, respectively.     

Thermodynamic study on the sublimation of succinic acid and of methyl- and dimethyl-substituted succinic and glutaric acids

The Knudsen mass-loss effusion technique was used to measure the vapour pressures at different temperatures of the following crystalline dicarboxylic acids: succinic acid, between T =  360.11 K and T =  375.14 K; methylsuccinic acid, between T =  343.12 K and T =  360.11 K; 2,2-dimethylsuccinic acid, between T =  350.11 K, and T =  365.11 K; 2-methylglutaric acid, between T =  338.38 K and T =  347.63 K; and 2,2-dimethylglutaric acid between T =  342.18 K and T =  352.66 K. From the temperature dependence of the vapour pressure, the standard molar enthalpies of sublimation were derived by the Clausius–Clapeyron equation and the molar entropies of sublimation at equilibrium pressures were calculated. Using estimated values for the heat capacity differences between the gas and the crystal phases of the studied compounds, the standard, p^o =  10⁵Pa, molar enthalpies, entropies and Gibbs energies of sublimation at T =  298.15 K, were derived:     

Excess molar enthalpies of binary systems containing 2-octanone,hexanoic acid,or octanoic acid at T = 298.15 K

An isothermal titration calorimeter was used to measure the excess molar enthalpies (H^E) of six binary systems at T = 298.15 K under atmospheric pressure. The systems investigated include (1-hexanol + 2-octanone), (1-octanol + 2-octanone), (1-hexanol + octanoic acid), (1-hexanol + hexanoic acid), {N,N-dimethylformamide (DMF) + hexanoic acid}, and {dimethyl sulfoxide (DMSO) + hexanoic acid}. The values of excess molar enthalpies are all positive except for the DMSO- and the DMF-containing systems. In the 1-hexanol with hexanoic acid or octanoic acid systems, the maximum values of H^E are located around the mole fraction of 0.4 of 1-hexanol, but the H^E vary nearly symmetrically with composition for other four systems. In addition to the modified Redlich–Kister and the NRTL models, the Peng–Robinson (PR) and the Patel–Teja (PT) equations of state were used to correlate the excess molar enthalpy data. The modified Redlich–Kister equation correlates the H^E data to within about experimental uncertainty. The calculated results from the PR and the PT are comparable. It is indicated that the overall average absolute relative deviations (AARD) of the excess enthalpy calculations are reduced from 18.8% and 18.8% to 6.6% and 7.0%, respectively, as the second adjustable binary interaction parameter, k_bij, is added in the PR and the PT equations. Also, the NRTL model correlates the H^E data to an overall AARD of 10.8% by using two adjustable model parameters.     

Thermodynamic study on the sublimation of 1,2-diphenylethane and of 3-phenylpropiolic acid

The Knudsen mass-loss effusion technique was used to measure the vapour pressures at different temperatures of the following crystalline compounds: 1,2-diphenylethane (bibenzyl), between T =  289.16 K and T =  303.20 K, and of 3-phenylpropiolic acid between T =  329.15 K and T =  343.15 K. From the temperature dependence of the vapour pressure, the standard molar enthalpies of sublimation at the mean temperature of the experimental range were derived by the Clausius–Clapeyron equation. From these results the standard, p^o =  10⁵Pa, molar enthalpies, entropies, and Gibbs energies of sublimation at T =  298.15 K, were calculated:     

Thermodynamic study on the sublimation of 3-phenylpropionic acid and of three methoxy-substituted 3-phenylpropionic acids

The Knudsen mass-loss effusion technique was used to measure the vapour pressures at different temperatures of the following compounds: 3-phenylpropionic acid, between T =  305.17 K and T =  315.17 K; 3-(2-methoxyphenyl)propionic acid, between T =  331.16 K and T =  347.16 K; 3-(4-methoxyphenyl)propionic acid, between T =  341.19 K and T =  357.15 K; 3-(3,4-dimethoxyphenyl)propionic acid, between T =  352.18 K and T =  366.16 K. From the temperature dependence of the vapour pressure, the standard molar enthalpies of sublimation Δ_cr^gH_m^owere derived by the Clausius–Clapeyron equation and the molar entropies of sublimation at equilibrium pressures were calculated. On the basis of estimated values for the heat capacity differences between the gas and the crystal phases of the studied compounds the standard, p ^∘  =  10⁵Pa, molar enthalpies, entropies and Gibbs energies of sublimation at T =  298.15 K, were derived:     

Selective determination of uric acid with DNA doped polymers modified carbon fiber microelectrode

New biocomposite materials, based on the incorporation of DNA doped p-aminobenzensulfonic acid, was fabricated by electrochemical method. A carbon fiber microelectrode modified by this thin film was fabricated for selective determination of uric acid (UA) in the presence of a larger amount of ascorbic acid (AA). It was found that the voltammetric oxidation peak separation between UA and AA is about 260 mV at the modified electrode. A linear response of the peak current versus the concentration was found in the range of 8 × 10⁻⁷–6 × 10⁻⁴ M with correlation coefficient of 0.9991 and the detection limit was 5 × 10⁻⁷ M (s/n = 3) at the 5 × 10⁻⁴ M AA. The presence of high concentration AA did not interference the determination. The electropolymerized film was characterized by SEM techniques. The modified electrode shows good sensitivity, selectivity and stability.     

Renewable platform-chemicals and materials: Thermochemical study of levulinic acid

The standard molar enthalpy of formation in the gaseous state (?613.5 ± 2.2) kJ · mol^?1 of levulinic acid has been obtained from combustion calorimetry and results from the temperature dependence of the vapour pressure measured by the transpiration method. In order to verify the experimental data, first-principles calculations have been performed. Enthalpies of formation derived from G4 and G3MP2 methods are in an excellent agreement with the experimental results. Thermodynamic analysis of the hydrolysis of 5-hydroxymethylfurfural to the levulinic and formic acids has revealed very high feasibility of these reactions with equilibrium constants completely shifted to the desired reaction products even at T = 298.15 K.     

Buffer standards for the physiological pH of the zwitterionic compound of 3-(N-morpholino)propanesulfonic acid (MOPS) from T = (278.15 to 328.15) K

This paper reports the pH values of five NaCl-free buffer solutions and 11 buffer compositions containing NaCl at I = 0.16 mol · kg⁻¹. Conventional pa_H values are reported for 16 buffer solutions with and without NaCl salt. The operational pH values have been calculated for five buffer solutions and are recommended as pH standards at T = (298.15 and 310.15) K after correcting the liquid junction potentials. For buffer solutions with the composition m₁ = 0.04 mol · kg⁻¹, m₂ = 0.08 mol · kg⁻¹, m₃ = 0.08 mol · kg⁻¹ at I = 0.16 mol · kg⁻¹, the pH at 310.15 K is 7.269, which is close to 7.407, the pH of blood serum. It is recommended as a pH standard for biological specimens.     

Determination of the iodine value and the free fatty acid content of waste animal fat blends using FT-NIR

This study determined iodine value (IV) and free fatty acids (FFA) content of four different animal fat wastes and their blends using Fourier transform near-infrared spectroscopy (FT-NIR). Chemometric analysis by partial least squares (PLS) regression was used to correlate spectral data with IV and FFA reference values of the samples. The effects of four spectra pre-processing (first derivative (FD), second derivative (SD), multiplicative scatter correction (MSC) and vector normalization (VN)) methods were investigated to predict the reproducibility and robustness of the PLS-NIR model developed. A set of 70% of animal fat wastes and their blends were used for developing PLS calibration models for measuring IV and FFA content using the remaining 30% samples as an independent test set validation. The coefficient of determination (R²), the root mean square error estimation (RMSEE), and the residual prediction deviation (RPD) were used as indicators for the predictability of the PLS models. PLS-NIR models developed using first derivative and second derivative spectral preprocessing methods were the best for both IV and FFA content analysis (For IV, FD; R² = 0.9870, RMSEE = 1.40 gI₂/100 g, RPD = 8.76, SD; R² = 0.9892, RMSEE = 1.28 gI₂/100 g, RPD = 9.64 while For FFA, FD; R² = 0.9991, RMSEE = 0.195%, RPD = 34.00, SD; R² = 0.9993, RMSEE = 0.182%, RPD = 36.8). Overall, the results of this study demonstrate the suitability of FT-NIR spectroscopy for the quality control analysis of feedstocks for biodiesel production.     

The crystal structure of potassium ammonium hexamolybdotellurate with telluric acid K5NH4[TeMo6O24].Te(OH)6.6H2O

An inorganic compound formulated as K₅NH₄[TeMo₆O₂₄].Te(OH)₆.6H₂O (1) has been isolated by conventional solution method and structurally characterized by single-crystal X-ray diffraction methods, scanning electron microscopy (SEM), IR, UV–vis spectra, and cyclic voltammetry measurements. This compound crystallizes in the monoclinic system, space group C2/c with unit a = 18.6841(1) Å, b = 10.0513(1) Å, c = 21.1065(1) Å, β = 116.495(1)°, V = 3547.49(4) ų, Z = 4, R = 0.033 and wR (F²) = 0.087 for 3432 unique observed reflexions [I > 2σ(I)]. The crystal structure of (1) is built up from an Anderson clusters connected through hydrogen-bonding interactions into a three-dimensional supramolecular network.     

Volumetric properties of itaconic acid aqueous solutions

Densities of itaconic acid aqueous solutions were measured at 5 K intervals from T = (278.15 to 343.15) K. From the determined densities, the apparent molar volumes, the cubic expansion coefficients and the second derivatives of volume with respect to temperature which are interrelated with the derivatives of isobaric heat capacities with respect to pressure were evaluated. These derivatives were qualitatively correlated with the changes in the structure of water when itaconic acid is dissolved in it.     

Solubility of terephthalic acid in aqueous acetic acid from 423.15 to 513.15 K

Using the steady-state method, the solubilities of terephthalic acid(1) in binary acetic acid(2) + water(3) solvent mixtures in a specially contrived vessel have been measured as a function of temperature in the temperature range 423.15–513.15 K and solvent composition range from x₂ = 1.000 to 0.3103 (molar fraction). The experimental solubilities are correlated with the Apelblat equation. The calculated results show good agreement with the experimental solubilities.     

L-Glutamic acid loaded collagen chitosan composite scaffold as regenerative medicine for the accelerated healing of diabetic wounds

Diabetic wounds (DWs) are characterized by prolonged inflammation, which poses a significant challenge for clinicians and researchers to promote healing. In this study, we fabricate L-Glutamic acid (LGA) loaded collagen/chitosan (COL-CS) composite scaffold for the accelerated healing of DW. The characterization outcomes of the composite scaffold revealed that a crosslinked scaffold holds optimum porosity, low matrix degradation, and sustained drug release in contrast to a non-crosslinked scaffold. In vitro, LGA composite scaffolds have not exhibited any toxicity on 3T3L1 cell lines. In vivo, the LGA composite scaffold has shown significantly (p < 0.001), higher rates of wound contraction than those in control and COL-CS scaffold treated groups. In addition, MMP-9 levels were also significantly reduced in LGA composite scaffold-treated group compared with those in the control and COL-CS scaffold treated group. Thus, the LGA composite scaffold may serve as a promising therapy in DW due to its unique modulatory effect on inflammatory biomarker MMP-9.     

Experimental and correlational study of phase equilibria in aqueous mixtures of phosphoric acid with aromatic hydrocarbons at various temperatures

Experimental solubility and tie-line data were obtained for (water + phosphoric acid + ethyl benzene or cumene) ternary systems at T = (298.15, 308.15 and 318.15) K and P = 101.32 kPa. The experimental tie-line values were correlated using the thermodynamic models of UNIQUAC and NRTL. The quality of the experimental results was determined through the Othmer–Tobias and Hand plots. Distribution coefficients and separation factors were evaluated over the immiscibility regions. The influence of temperature on biphasic region is found to be negligible.