Benzothiazole-based heterodipodal chemosensor for Cu2+ and CN– ions in aqueous media

A simple and selective chemosensor, A, was developed for recognizing Cu²⁺. The emission spectra of receptor A showed a fluorescence quenching response upon addition of Cu²⁺ with a low detection limit of 4.51 nM, significantly less than the WHO recommended guideline for drinking water. In addition, the formed A?Cu²⁺ complex was examined for secondary sensing of anions. The A?Cu²⁺ complex showed selectivity for CN^– via a recovering emission profile of A.     

A highly selective ratiometric fluorescent chemosensor for Zn2+ ion based on a polyimine macrocycle

A new ratiometric fluorescent chemosensor based on a polyimine macrocycle ligand 1 has been synthesized. The chemosensor can exhibit a pronounced fluorescence response and high selectivity to Zn²⁺ ion over other 15 metal ions, including Cd²⁺. Sensor 1 appears an emission peak at 370 nm. Upon the addition of Zn²⁺ ion, the typical emission peak for 1 at 370 nm is obviously quenched, but a new emission peak at around 470 nm appears and shows a large enhancement due to the formation of a 1:1 Zn²⁺-1 complex. In addition, there is a good linear relationship between the fluorescence ratio I_470nm/I_370nm and the concentration of Zn²⁺, which makes a ratiometric assay of Zn²⁺ ion possible.     

"Off-On" based fluorescent chemosensor for Cu2+ in aqueous media and living cells

A novel Cu²⁺-specific “off-on” fluorescent chemosensor of naphthalimide modified rhodamine B (naphthalimide modified rhodamine B chemosensor, NRC) was designed and synthesized, based on the equilibrium between the spirolactam (non-fluorescence) and the ring-opened amide (fluorescence). The chemosensor NRC showed high Cu²⁺-selective fluorescence enhancement over commonly coexistent metal ions or anions in neutral aqueous media. The limit of detection (LOD) based on 3 × δ_blank/k was obtained as low as 0.18 μM of Cu²⁺, as well as an excellent linearity of 0.05-4.5 μM (R = 0.999), indicating the chemosensor of high sensitivity and wide quantitation range. And also the coordination mode with 1:1 stoichiometry was proposed between NRC and Cu²⁺. In addition, the effects of pH, co-existing metal ions and anions, and the reversibility were investigated in detail. It was also demonstrated that the NRC could be used as an excellent “off-on” fluorescent chemosensor for the measurement of Cu²⁺ in living cells with satisfying results, which further displayed its valuable applications in biological systems.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

The features of the Cu2+-entry into the structure of tourmaline

EPR and optical absorption spectra of Cu²⁺ ion were investigated in natural elbaites from Brazil and Zambia and in synthetic olenite single crystal. In elbaite from Zambia, the content of Cu²⁺ ions was found to be about 0.006 pfu, whereas in Brazilian elbaite the amount of this ion can approach up to 0.2 pfu. The rose color of elbaite from Zambia is mainly due to optical absorption at 515 nm related to Mn³⁺ ions. The blue color of Brazilian elbaite is related to Cu²⁺ absorption bands at 695 nm and 920 nm. Spin Hamiltonian parameters of Cu²⁺ calculated from the angular dependence of the EPR spectra are: g _x = 2.054, g _y = 2.092, g _z = 2.374; A _x = 27.8·10^?4 cm^?1, A _y = 59.3·10^?4 cm^{? 1}, A _z = 133.2·10^?4 cm^?1. We propose that Cu²⁺ ions enter into Y octahedra with common edges; the symmetry of these Y octahedra is lowered because of local disorder induced by occupancy of the Y site by cations of very different size and charge, such as Li⁺, Al³⁺, and Cu²⁺.     

Novel coumarin-based containing denrons selective fluorescent chemosesor for sequential recognition of Cu2+ and PPi

In this study, we have successfully synthesized a novel coumarin-based dendrons derivative CD and its chemical structure was characterized by ¹H NMR, ¹³C NMR and ESI-HR-MS. The sensor CD showed an obvious “on-off” fluorescence quenching response toward Cu²⁺ with a maximum quenching efficiency of 99.8%. The CD-Cu²⁺ complex showed an “off-on” fluorescence enhancement response toward PPi over many competitive anions. The detection limit of the sensor CD was 0.29?×?10^?6?M to Cu²⁺ and 2.39?×?10^?9?M to PPi. In addition, the sensor CD showed a 1:1 binding stoichiometry to Cu²⁺ and the sensor CD-Cu²⁺ showed a 2:1 binding stoichiometry to PPi in CH₃CN/HEPES buffer medium (9:1 v/v, pH?=?7.2). The stable pH range of sensor CD to Cu²⁺ and CD-Cu²⁺ to PPi was from 3 to 8.     

Fluctuation in occupancy of Cu2+ ions in Zn- and Cd-substituted Cu-ferrites

Mössbauer effect technique has been used for the comparative study of Cu_1?x Zn _x Fe₂O₄ and Cu_1?x Cd _x Fe₂O₄ ( _x = 0.0?1.0) ferrites. Both Zn²⁺ and Cd²⁺ cations are divalent, non-magnetic ions with different ionic radii. With the substitution of these non-magnetic cations the average internal magnetic field decreases and paramagnetic behavior is dominated at x = 0.7 in both series. It is observed that the occupancy of Cu²⁺ ions for tetrahedral site is not constant for all compositions but fluctuate between 8–15%. It is also found that Cu²⁺ ions have more preference for tetrahedral site in Cu-Zn system as compared to the Cu-Cd system. Zn²⁺ and Cd²⁺ both ions occupy tetrahedral site completely and form normal spinels for x = 1.0.     

Synthesis and photoluminescence properties of tunable emission phosphors Ca4Si2O7F2:Ce3+

The Ce³⁺ activated phosphors Ca₄Si₂O₇F₂:Ce³⁺ are prepared by a solid state reaction technique. The UV–vis luminescence properties as well as fluorescence decay time spectra are investigated and discussed. The results revealed that there were two kinds of Ce³⁺ luminescence behavior with 408 and 470 nm emissions, respectively. Under 355 nm excitation, the Ce(1) emission (408 nm) is dominant at low doping concentration, and then the Ce(2) emission (470 nm) get more important with increasing of Ce³⁺ concentrations in the host. The phosphors Ca₄Si₂O₇F₂:xCe³⁺ show tunable emissions from blue area to green-blue area under near-ultraviolet light excitation, indicating a potential application in near-UV based w-LEDs.     

A coumarin based highly selective fluorescent chemosensor for sequential recognition of Cu2+ and PPi

In this study, we have successfully synthesized a new coumarin based fluorescent chemosensor 1, in which tren and quinolone are introduced as receptors for sequential recognition of Cu²⁺ and PPi. The structure of chemosensor 1 was characterized by ¹H NMR, ¹³C NMR and ESI-HR-MS. Sensor 1 showed an obvious “on-off” fluorescence quenching response toward Cu²⁺, and the quenching efficiency reached a maximum of 99.6% with the addition of 20 equiv. of Cu²⁺. The 1-Cu²⁺ complex showed an “off-on” fluorescence enhancement response toward PPi over many competitive anions, especially HPO₄^2? and H₂PO₄^?. The detection limit of sensor 1 was 1.9?×?10^?6?M to Cu²⁺ and 5.96?×?10^?8?M to PPi. In addition, sensor 1 showed a 1:1 binding stoichiometry to Cu²⁺ and sensor 1-Cu²⁺ showed a 2: 1 binding stoichiometry to PPi in CH₃CN/HEPES buffer medium (9:1 v/v, pH?=?7.4). The stable pH range of sensor 1 to Cu²⁺ and 1-Cu²⁺ to PPi was from 4 to 8.     

A bifunctional,colorimetric and fluorescent probe for recognition of Cu2+ and Hg2+ and its application in molecular logic gate

<正>~~     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Cu2+ in trigonal-bipyramidaler Koordination: Die Struktur des CuGaInO4

Cu²⁺ in Trigonal-bipyramidal Coordination: Structure of CuGaInO₄ CuGaInO₄ crystallizes in space group R3 m with the hexagonal unit cell parameters a = 335.4(3) and c = 2481(5) pm (Z = 3). The anions form a 12-layer structure with the sequence (31)₃. Indium has a position between cubically packed oxygen layers and possesses a (trigonally-compressed) octahedral coordination. Cu²⁺ and Ga³⁺ – with positions near to the oxygen layers of hexagonal sequence – have a trigonal-bipyramidal coordination (distorted: C_3v). Polyhedra of the same kind form layers by mutual connections via common edges. Polyhedra of different kind are connected with each other along the 3 -axis by common corners.     

FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.     

Formation of out of plane oxime metallacycles in [Cu2] and [Cu4] complexes

The reaction of Cu(ClO₄)₂·6H₂O with dimethylglyoxime (H₂dmg) in a 1:1 mole ratio in aqueous methanol at room temperature affords the dinuclear complex [Cu₂(μ-Hdmg)₄] (1). Reaction of 1 with [Cu(bpy)(H₂O)₂](ClO₄)₂ (bpy = 2,2′-bipyridine) in a 1:1 mole ratio in aqueous methanol at room temperature yields the tetranuclear complex [Cu₄(μ-Hdmg)₂(μ-dmg)₂(bpy)₂(H₂O)₂](ClO₄)₂ (2). The direct reaction of Cu(ClO₄)₂·6H₂O with H₂dmg and bpy in a 2:2:1 mole ratio in aqueous methanol at room temperature also yields 2 quantitatively. The complexes 1 and 2 were structurally characterized by X-ray crystallography. Unlike the binding in Ni/Co-dmg, two different types of N?O bridging modes during the oxime based metallacycle formation and stacking of square planar units have been identified in these complexes. The neutral dinuclear complex 1 has CuN₄O coordination spheres and complex 2 consists of a dicationic [Cu₄(μ-Hdmg)₂(μ-dmg)₂(bpy)₂(H₂O)₂]²⁺ unit and two uncoordinated ClO₄^? anions having CuN₄O and CuN₂O₃ coordination spheres. The two copper(II) ions are at a distance of 3.846(8) Å in 1 for the trans out of plane link and at 3.419(10) and 3.684(10) Å in 2 for the trans out of plane and cis in plane arrangements, respectively. The average Cu–N_oxime distances are 1.953 and 1.935 Å, respectively. The average basal and apical Cu?O_oxime distances are 1.945, 2.295 and 2.429 Å. The UV–Vis spectra of 2 is similar to the spectrum of the reaction mixture of 1 and [Cu(bpy)(H₂O)₂]²⁺. Variable temperature magnetic properties measurement shows that the interaction between the paramagnetic copper centers in complex 1 is antiferromagnetic in nature. The EPR spectra of frozen solution of the complexes at 77 K consist of axially symmetric fine-structure transitions (ΔM_S = 1) and half-field signals (ΔM_S = 2) at ca. 1600 G, suggesting the presence of appreciable Cu–Cu interactions.     

Ratiometric fluorescent detection of Cu(II) in semi-aqueous solution using a two-fluorophore approach

Schiff base sensor 1, containing naphthalene and naphthalimide fluorophores with separate and distinct emission wavelengths, showed good selectivity for Cu(II) over other tested physiological and environmentally important cations through changes in its fluorescence spectra in THF/H₂O (9:1) HEPES buffered solution. By taking the ratiometric change of the emissions at 435 nm (naphthalene-Schiff base) and 510 nm (naphthalimide) good linearity was observed in the 0-10 μM range. The enhancement of the 435 nm emission upon binding Cu²⁺ was attributed to a prevention of the rapid CN isomerisation that otherwise leads to non-radiative decay, while the quenching of the naphthalimide emission was attributed to electron transfer between the excited naphthalimide fluorophore and the redox active Cu²⁺.     

Ratiometry of monomer/excimer emissions of dipyrenyl thiacalix[4]arene for Cu detection: a potential Cu and K switched INHIBIT logic gate with NOT and YES logic functions

A new thiacalix[4]arene derivative 2 of 1,3-alternate conformation possessing two pyrene groups has been synthesized and examined for its cation recognition abilities towards different cations such as lithium, sodium, potassium, nickel, zinc, cadmium, silver, mercury, lead and copper by fluorescence spectroscopy. In CH₃CN/CH₂Cl₂ (1:1), the presence of Cu(II) induces the formation of a 1:2 ligand/metal complex, which exhibits increasing monomer emission at 376 nm at the expense of the fluorescent excimer emission of 2 centered at 476 nm. In the presence of K⁺, the intensity of the excimer emission increases along with the formation of a new blue shifted band at 435 nm which corresponds to a static dimer. The compound behaves as a fluorescent molecular switch upon chemical input of Cu²⁺ and K⁺.     

Cu(II)-selective fluorescence of a bis-quinolylimine derivative

A new bis-quinolylimine ligand containing an azadiene moiety, 1,4-bis(2-quinolyl)-2,3-diaza-1,3-buthadiene (1), was synthesized by one-step facile condensation. This simple ligand, when dissolved in acetonitrile, shows a Cu²⁺-selective fluorescence enhancement. Coordination of 1 with Cu²⁺ produces two kinds of complexes with 1:1 and 1:2 stoichiometries. The 1:2 complex shows a strong fluorescence (Φ_F = 0.37), while the 1:1 complex does not (Φ_F < 0.01). Ab initio molecular orbital calculation reveals that the 1:1 complex has a distorted structure, while the 1:2 complex has a planar structure. The planar configuration of the 1:2 complex, therefore, allows an extended π-conjugation over the entire molecule and, hence, results in fluorescence enhancement.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

The effect of substituents on the response of 3,4-dihydro-3-(2-oxo-2-phenylethylidene)-quinoxalin-2(1H)-one derivatives toward binding of Cu2+

A new series of fluorogenic chelating reagents based on phenylethylidene-3,4-dihydro-1H-quinoxalin-2-one with different substituents (attached either to the quinoxaline-2-one (3) or phenyl ring (4)) have been investigated to examine the effect of the substituent (nature/position) on the spectral properties and response toward Cu²⁺ in the presence of other metal cations, in ethanol. It was found that all of the examined ligands exhibit a pronounced response to Cu²⁺ addition resulting in a red-shift in the UV–vis spectra and a strong quenching in the fluorescence spectra. Among the ligands examined, 3a exhibits the highest selectivity toward various metal cations. In general it appears that the best response selectivity of these ligands toward Cu²⁺ ion is obtained by either EDG in 3 or EWG in 4. For example, the fluorescence intensity of 3a (with OMe substituent) increases to about three times that of the unsubstituted derivative.