Effect of Streamwise Streaky Structures on Turbulization of a Circular Jet

Experimental investigations of the influence of streamwise streaky structures on turbulization of a circular laminar jet are described. The qualitative characteristics of jet evolution are studied by smoke visualization of the flow pattern in the jet and by filming the transverse and longitudinal sections of the jet illuminated by the laser sheet with image stroboscopy. It is shown that the streaky structures can be generated directly at the nozzle exit, and their interaction with the Kelvin–Helmholtz ring vortices leads to emergence of azimuthal beams ( structures) by a mechanism similar to threedimensional distortion of the twodimensional Tollmien–Schlichting wave at the nonlinear stage of the classical transition in nearwall flows. The effect of the jetexhaustion velocity and acoustic action on jet turbulization is considered.     

Control of low-speed turbulent separated flow using jet vortex generators

A parametric study has been performed with jet vortex generators to determine their effectiveness in controlling flow separation associated with low-speed turbulent flow over a two-dimensional rearward-facing ramp. Results indicate that flow-separation control can be accomplished, with the level of control achieved being a function of jet speed, jet orientation (with respect to the free-stream direction), and jet location (distance from the separation region in the free-stream direction). Compared to slot blowing, jet vortex generators can provide an equivalent level of flow control over a larger spanwise region (for constant jet flow area and speed).Nomenclature C _p pressure coefficient, 2(P-P_)/V ² - C _Q total flow coefficient, Q/ v - D ₀ jet orifice diameter - Q total volumetric flow rate - R Reynolds number based on momentum thickness - u fluctuating velocity component in the free-stream (x) direction - V free-stream flow speed - VR ratio of jet speed to free-stream flow speed - x coordinate along the wall in the free-stream direction - jet inclination angle (angle between the jet axis and the wall) - jet azimuthal angle (angle between the jet axis and the free-stream direction in a horizontal plane) - boundary-layer thickness - momentum thickness - lateral distance between jet orifices A version of this paper was presented at the 12th Symposium on Turbulence, University of Missouri-Rolla, 24–26 Sept. 1990     

The rheology of polymeric liquid crystals

The molecular theory of Doi has been used as a framework to characterize the rheological behavior of polymeric liquid crystals at the low deformation rates for which it was derived, and an appropriate extension for high deformation rates is presented. The essential physics behind the Doi formulation has, however, been retained in its entirety. The resulting four-parameter equation enables prediction of the shearing behavior at low and high deformation rates, of the stress in extensional flows, of the isotropic-anisotropic phase transition and of the molecular orientation. Extensional data over nearly three decades of elongation rate (10^–2–10¹) and shearing data over six decades of shear rate (10^–2–10⁴) have been correlated using this analysis. Experimental data are presented for both homogeneous and inhomogeneous shearing stress fields. For the latter, a 20-fold range of capillary tube diameters has been employed and no effects of system geometry or the inhomogeneity of the flow-field are observed. Such an independence of the rheological properties from these effects does not occur for low molecular weight liquid crystals and this is, perhaps, the first time this has been reported for polymeric lyotropic liquid crystals; the physical basis for this major difference is discussed briefly. A Semi-empirical constant in eq. (18), N/m² - c rod concentration, rods/m³ - c ^* critical rod concentration at which the isotropic phase becomes unstable, rods/m³ - C interaction potential in the Doi theory defined in eq. (3) - d rod diameter, m - D semi-empirical constant in eq. (19), s^–1 - D _r lumped rotational diffusivity defined in eq. (4), s^–1 - rotational diffusivity of rods in a concentrated (liquid crystalline) system, s^–1 - D _ro rotational diffusivity of a dilute solution of rods, s^–1 - f distribution function defining rod orientation - F tensorial term in the Doi theory defined in eq. (7) (or eq. (19)), s^–1 - G tensorial term in the Doi theory defined in eq. (8) - K _B Boltzmann constant, 1.38 × 10^–23 J/K-molecule - L rod length, m - S scalar order parameter - S tensor order parameter defined in eq. (5) - t time, s - T absolute temperature, K - u unit vector describing the orientation of an individual rod - rate of change ofu due to macroscopic flow, s^–1 - v fluid velocity vector, m/s - v velocity gradient tensor defined in eq. (9), s^–1 - V mean field (aligning) potential defined in eq. (2) - x coordinate direction, m - Kronecker delta (= 0 if = 1 if = ) - _r ratio of viscosity of suspension to that of the solvent at the same shear stress - _s solvent viscosity, Pa · s - ^* viscosity at the critical concentrationc ^*, Pa · s - v ₁, v₂ numerical factors in eqs. (3) and (4), respectively - deviatoric stress tensor, N/m² - volume fraction of rods - ⁰ constant in eq. (16) - ^* volume fraction of rods at the critical concentrationc ^* - average over the distribution functionf(u, t) (= d ²u f(u, t)) - gradient operator - d ²u integral over the surface of the sphere (|u| = 1)     

Construction of exact numerical solutions of the stationary traveling wave type for viscous thin films

An effective numerical procedure, based on the Galerkin method, for finding solutions of the stationary traveling wave type in the complete formulation is proposed for the case of viscous liquid films. Examples of a viscous film flowing freely down a vertical surface have been calculated. The calculations have been made for various values of the dimensionless surface tension , including =0. The method makes it possible to predict a number of bifurcations that occur as decreases. The existence of numerous families of stationary traveling waves when 1 was demonstrated in [6]. The present study shows that as 1 all but one of these families of wave solutions disappear. The shape of the periodic and solitary waves and the pressure distribution in the film are found for various . When =0 and the wave number is fairly small, the periodic solution has a singularity, as predicted in [14]: at the crest of the wave a corner point appears; the angle between the tangents at this point =140–150. The method proposed can be used to calculate other wavy film flows.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 94–100, May–June, 1990.     

Shear Instability at the “Explosion Product–Metal” Interface for Sliding Detonation of an Explosive Charge

Periodic perturbations at the explosion product–metal interface were studied experimentally. Experiments were performed for both spherical and plane geometry. Critical conditions of wave formation (detonation velocity of an explosive charge D 6.9 mm/sec) are determined, and an explanation of this effect is given. It is found experimentally that a dynamic pulse causes intense plastic strains at the explosion products–metal interface, leading to thermal softening of the steel boundary layer. In this layer, Kelvin–Helmholtz instability occurs. Calculationanalytical estimates of the critical boundary unstable wavelength agree satisfactorily with experimental results.     

Experimental determination of the hydrodynamic moment associated with the nonsymmetric penetration of a disk into a compressible fluid

The nonsymmetric penetration of a disk (circular cylinder) into a compressible fluid is investigated. The results are obtained by physical modeling. A fluid with a low speed of sound (finely dispersed medium with gas bubbles, whose dimensionless equation of state coincides with the dimensionless equation of state of water [5]) was used as the working medium. The experiments were carried out at entry angles on the interval 54 < < 88, angles of attack on the interval –15 < < +15 and Mach numbers on the interval 0.002 M 0.2.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 88–94, September–October, 1990.     

Interpolation formulas for maxwell viscosity of certain metals as a function of shear-strain intensity and temperature

The purpose of this study is the construction of interpolation formulas for the dependence of Maxwell viscosity, a quantity which is the reciprocal of shear-strain relaxation time , on shear-strain intensity and temperature for several metals: iron, aluminum, copper, and lead. This function was interpolated in various temperature and deformation velocity ranges in accordance with available experimental data for iron (0 10⁷ sec^–1, 200 ° T 1500 °); aluminum (0 10⁷ sec^–1, 300 ° T 900 °); copper (0 10⁵ sec^–1, 300 ° T 1300 °); lead (0 10⁶ sec^–1, 90 ° T 400 °); temperatures in °K.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 114–118, July–August, 1974.     

Hypersonic flow past blunt-edged delta wings

A method is proposed for calculating hypersonic ideal-gas flow past blunt-edged delta wings with aspect ratios = 100–200. Systematic wing flow calculations are carried out on the intervals 6 M 20, 0 20, 60 80; the results are analyzed in terms of hypersonic similarity parameters.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 175–179, September–October, 1990.     

A three-parameter model describing the behaviour of a viscoelastic liquid in a tangential annular flow

A three-parameter model describing the shear rate-shear stress relation of viscoelastic liquids and in which each parameter has a physical significance, is applied to a tangential annular flow in order to calculate the velocity profile and the shear rate distribution. Experiments were carried out with a 5000 wppm aqueous solution of polyacrylamide and different types of rheometers. In a shear-rate range of seven decades (5 10^–3 s^–1 < < 1.2 10⁵ s^–1) a good agreement is obtained between apparent viscosities calculated with our model and those measured with three different types of rheometers, i.e. Couette rheometers, a cone-and-plate rheogoniometer and a capillary tube rheometer. a physical quantity defined by:a = {1 – ( / ₀)}/ ₀ (Pa^–1) - C constant of integration (1) - r distancer from the center (m) - r ₁,r ₂ radius of the inner and outer cylinder (m) - v _r local tangential velocity at a distancer from the center (v _r = _r r) (m s^–1) - v ₂ local tangential velocity at a distancer ₂ from the center (m s^–1) - shear rate (s^–1) - local shear rate (s^–1) - ₁ wall shear rate at the inner cylinder (s^–1) - dynamic viscosity (Pa s) - _a apparent viscosity (_a = / ) (Pa s) - _a1 apparent viscosity at the inner cylinder (Pa s) - ₀ zero-shear viscosity (Pa s) - infinite-shear viscosity (Pa s) - shear stress (Pa) - _r local shear stress at a distancer from the center (Pa) - ₀ yield stress (Pa) - ₁, ₂ wall shear-stress at the inner and outer cylinder (Pa) - _r local angular velocity (s^–1) - ₂ angular velocity of the outer cylinder (s^–1)     

Explanation of the “anomalous” dispersal of the discrete particles in a two-phase turbulent jet with allowance for their inertia

The anomalous dispersal of the discrete particles in a two-phase turbulent jet (growth of their concentration in the region of the axis, rapid damping of the concentration in the initial sections of the jet, and wavelike axial distribution) is studied with allowance for the initial conditions and the Magnus effect.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 36–41, January–February, 1984.I thank G. N. Abramovich and A. N. Sekundov for discussing the results.     

Existence theorem for a minimum problem with free discontinuity set

We study the variational problem Where is an open set in ⁿ ,n2gL ^q () L (), 1q<+, O<, <+ andH _n–1 is the (n–1)-dimensional Hausdorff Measure.     

Supersonic nonequilibrium flow past segmental bodies of a mixture simulating the atmosphere of venus

Calculations of the flow of the mixture 0.94 CO₂+0.05 N₂+0.01 Ar past the forward portion of segmentai bodies are presented. The temperature, pressure, and concentration distributions are given as a function of the pressure ahead of the shock wave and the body velocity. Analysis of the concentration distribution makes it possible to formulate a simplified model for the chemical reaction kinetics in the shock layer that reflects the primary flow characteristics. The density distributions are used to verify the validity of the binary similarity law throughout the shock layer region calculated.The flow of a CO₂+N₂+Ar gas mixture of varying composition past a spherical nose was examined in [1]. The basic flow properties in the shock layer were studied, particularly flow dependence on the free-stream CO₂ and N₂ concentration.New revised data on the properties of the Venusian atmosphere have appeared in the literature [2, 3] One is the dominant CO₂ concentration. This finding permits more rigorous formulation of the problem of blunt body motion in the Venus atmosphere, and attention can be concentrated on revising the CO₂ thermodynamic and kinetic properties that must be used in the calculation.The problem of supersonic nonequilibrium flow past a blunt body is solved within the framework of the problem formulation of [4].Notation V body velocity - shock wave standoff - universal gas constant - ratio of frozen specific heats - hRt/m enthalpy per unit mass undisturbed stream P pressure - density - T temperature - m molecular weight - c_p specific heat at constant pressure - (X) concentration of component X (number of particles in unit mass) - R body radius of curvature at the stagnation point - _j rate of j-th chemical reaction shock layer P V ² pressure - density - TT temperature - mm molecular weight Translated from Izv. AN SSSR. Mekhanika Zhidkosti i Gaza, Vol. 5, No. 2, pp. 67–72, March–April, 1970.The author thanks V. P. Stulov for guidance in this study.     

Nicht-isotherme Rieselfilmströmung einer hochviskosen Flüssigkeit mit stark temperaturabhÄngiger ViskositÄt

Zusammenfassung Es werden Geschwindigkeitsverteilungen und Filmdickenabnahmen von nichtisothermen NEWTONschen und nicht-NEWTONschen (Potenzansatz) Rieselfilmen mit temperaturanhÄngiger ViskositÄt berechnet, wobei die Temperaturverteilung im Film als linear vorausgesetzt wird. An dicken Rieselfilmen mit Re=10^–4... 10^–2 sind Geschwindigkeitsprofile, Filmdicken und OberflÄchentemperaturen gemessen und daraus die thermische EinlauflÄnge bestimmt worden. Ausgehend von der Penetrationstheorie für eine endlich dicke Platte kann man für diese EinlauflÄnge eine Approximationsformel erhalten, die für Strömungen mit Re < 1000 verwendet werden kann.

---

Non-isothermal filmflow of a highly viscous liquid, the viscosity strongly depending on temperature

Velocity distributions and film thicknesses of nonisothermal NEWTONIAN and non-NEWTONIAN (power-law) falling films are computed assuming that the temperature across the film varies linearly. Experimental studies on thick falling films of Re=10^–4...10^–2 had been carried out to measure velocities, film thickness and surface temperature and to calculate the thermal entrance length. One can get for this entrance length a approximation formula which is valid for flows with RePr <1000 by applying the results for the thermal penetration into a material finite plate.

---

Bezeichnungen B dimensionsloser Temperaturkoeffizient - ¯B [K] Temperaturkoeffizient (ln)/(1/T) - c_p [J/kgK] spezif. WÄrme bei konst. Druck - Fo FOURIER-Zahl - g [m/s²] Erdbeschleunigung - H dimensionslose Filmdicke - h [m] Filmdicke - m [Pas^2–n] ViskositÄtskoeffizient im Potenzansatz von OSTWALD-DE WAELE - Nu NUSSELT-Zahl - n Flüssigkeitsexponent im Potenzansatz von OSTWALD-DE WAELE - Pr PRANDTL-Zahl (Gl.3.5) - q [W/m²] WÄrmestromdichte - Re REYNOLDS-Zahl (Gl.3.4) - T [K] Temperatur - t [s] Zeit - U dimensionslose Geschwindigkeit (X-Komponente) - u [m/s] Geschwindigkeitskomponente in x-Richtung - X dimensionslose Koordinate (X=x/h₀) - x [m] LÄnge, Koordinate - Y dimensionslose Koordinate (Y=y/h₀) - y [m] Höhe, Koordinate - [W/m²K] WÄrmeübergangskoeffizient - Plattenneigungswinkel gegen Horizontale - [s^–1] Schergeschwindigkeit - dimensionslose Temperatur (Gl.3.3) - [m²/s] TemperaturleitfÄhigkeit (Gl.3.3) - [W/mK] WÄrmeleitfÄhigkeit - [Pas] ViskositÄt - [kg/m³] spezif. Dichte - [Pa] Schubspannung Indizes a scheinbar (apparent) - 0 bei x=0, auch: isotherm - P auf die Penetrationszeit bezogen - s an der OberflÄche - T bei linearer Temperaturdifferenz T - w an der Wand - 99 auf =0,99 bezogen - gemittelt, Mittelwert - thermisch ausgebildet, bei x - proportional - ¯t ungefÄhr - kleiner oder gleich ungefÄhr     

About the Regularized Navier–Stokes Equations

The first goal of this paper is to study the large time behavior of solutions to the Cauchy problem for the 3-dimensional incompressible Navier–Stokes system. The Marcinkiewicz space L^3, is used to prove some asymptotic stability results for solutions with infinite energy. Next, this approach is applied to the analysis of two classical regularized Navier–Stokes systems. The first one was introduced by J. Leray and consists in mollifying the nonlinearity. The second one was proposed by J.-L. Lions, who added the artificial hyper-viscosity (–)^{/ 2}, > 2 to the model. It is shown in the present paper that, in the whole space, solutions to those modified models converge as t toward solutions of the original Navier–Stokes system.     

Gradientenabhängigkeit der Viskosität verdünnter Lösungen von Fadenmolekülen

Zusammenfassung Es wird über die Gradientenabhängigkeit der Viskosität von Polymeren mit hohem Molekulargewicht in Lösungsmitteln üblicher Viskosität berichtet. Die Ermittlung von [] für verschwindenden Gradienten []_G0 und besonders für sehr hohe Gradienten []_G wird diskutiert.Der gemessene Gradientenbereich erstreckt sich vonG=10¹ bis 3 · 10⁴ sec^–1. Bei unserem Präparat mit dem höchsten Molekulargewicht, einem Polymethylmeth-acrylat vonM=16 · 10⁶, ergibt dies ₀-Werte bis 190, wenn ₀ die theoretisch als maßgeblicher Parameter benutzte Größe ₀=M · [] ₀ · ₀/RT ist. Wir beobachteten im gesamten recht großen ₀-Bereich für unsere Lösungsmittel ( ₀<6 · 10^–3 Poise) eine kontinuierliche Abnahme von []. Diese ist um so ausgeprägter, je höher []_G=0 wird.Vorgetragen auf der Jahrestagung der Deutschen Rheologen vom 11.–13. Mai 1964 in Berlin-Dahlem. - Teil einer Dissertation (D 77) der Universität Mainz.Herrn Prof.G. V. Schulz danken wir für anregende Diskussionen.Der eine von uns (B. N.) dankt der Alexan-der-von-Humboldt-Stiftung für ein Stipendium. Der Deutschen Forschungsgemeinschaft danken wir für eine Sachbeihilfe.     

Investigation of stationary flow of viscous gas in a thin three-dimensional shock layer

A three-dimensional shock layer near the blunt surface of a fairly smooth body is analyzed asymptotically. Equations of the first approximation are obtained and justified in various cases of the limit 1, 0, ( – 1)^–1M ^-2 0. These equations are simplified for the flow near the stagnation point of a body with double curvature and near the blunt leading edge of a sweptback wing. The results of some calculations are given and compared with the results of [17, 18] in the case of axisymmetric flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 115–126, September–October, 1980.     

Some self-similar solutions of the Leibenzon equation

Self-similar one-dimensional solutions of the Leibenzon equation c²_t= _zz ^k (z 0, k 2) are considered. Approximate solutions are constructed for the two cases in which the initial value = ₁ = const > 0 and on the boundary either a constant value = ₂ < ₁ is maintained or the flow (directed outwards) is given. In the first problem the dependence of the boundary flow on the governing parameters is determined. A characteristic property of the types of motion in question is the existence near the boundary of a region, expanding with time, in which the flow is almost independent of the coordinate.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 145–150, September–October, 1991.     

Qualitative behavior of dissipative wave equations on bounded domains

The qualitative behavior of solutions of the mixed problem u_tt = u-a(x)u_t in IR x , u=0 on IR x , is studied in the case when a>0 and IRⁿ is bounded. Roughly speaking, if aa_min>0, then solutions decay at least as fast as exp t( –1/2a_min), with the possible exception of a finite dimensional set of smooth solutions whose existence is associated with a phenomenon of overdamping. If a_max is sufficiently small, depending on , then no overdamping occurs.Partially supported by NSF grant NSF GP 34260.This work was partially supported by the National Science Foundation under Grant No. GP 34260     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

Mixed convection flow over a vertical plate with localized heating (cooling), magnetic field and suction (injection)

An analysis is carried out to study the effects of localized heating (cooling), suction (injection), buoyancy forces and magnetic field for the mixed convection flow on a heated vertical plate. The localized heating or cooling introduces a finite discontinuity in the mathematical formulation of the problem and increases its complexity. In order to overcome this difficulty, a non-uniform distribution of wall temperature is taken at finite sections of the plate. The nonlinear coupled parabolic partial differential equations governing the flow have been solved by using an implicit finite-difference scheme. The effect of the localized heating or cooling is found to be very significant on the heat transfer, but its effect on the skin friction is comparatively small. The buoyancy, magnetic and suction parameters increase the skin friction and heat transfer. The positive buoyancy force (beyond a certain value) causes an overshoot in the velocity profiles.A mass transfer constant - B magnetic field - C_fx skin friction coefficient in the x-direction - C_p specific heat at constant pressure, kJ.kg^–1.K - C_v specific heat at constant volume, kJ.kg^–1.K^–1 - E electric field - g acceleration due to gravity, 9.81 m.s^–2 - Gr Grashof number - h heat transfer coefficient, W.m².K^–1 - Ha Hartmann number - k thermal conductivity, W.m^–1.K - L characteristic length, m - M magnetic parameter - Nu_x local Nusselt number - p pressure, Pa, N.m^–2 - Pr Prandtl number - q heat flux, W.m^–2 - Re Reynolds number - Re_m magnetic Reynolds number - T temperature, K - T_o constant plate temperature, K - u,v velocity components, m.s^–1 - V characteristic velocity, m.s^–1 - x,y Cartesian coordinates - thermal diffusivity, m².s^–1 - coefficient of thermal expansion, K^–1 - , transformed similarity variables - dynamic viscosity, kg.m^–1.s^–1 - ₀ magnetic permeability - kinematic viscosity, m².s^–1 - density, kg.m^–3 - buoyancy parameter - electrical conductivity - stream function, m².s^–1 - dimensionless constant - dimensionless temperature, K - w, conditions at the wall and at infinity