Scalar-relativistic 5f-in-core pseudopotentials and core-polarization potentials for trivalent actinides: calibration calculations for Ac<Superscript>3+</Superscript>, Cm<Superscript>3+</Superscript> and Lr<Superscript>3+</Superscript> complexes

The performance of recently proposed 5f-in-core pseudopotentials for the trivalent actinides was investigated in calculations for model complexes An³⁺L ⁿ⁻ for three selected actinides (An³⁺ = Ac³⁺, Cm³⁺, Lr³⁺) and eight simple ligands with atoms from the first three periods of the table of elements (L ⁿ⁻ = F⁻, Cl⁻, OH⁻, SH⁻, CO, NH₂⁻, H₂O, H₂S, NH₃). Results of Hartree-Fock and Coupled Cluster with singles, doubles and perturbative triples calculations using basis sets of quadruple-zeta quality are compared to corresponding reference data obtained with scalar-relativistic energy-adjusted 5f-in-valence small-core pseudopotentials. The inclusion of core-polarization potentials in the 5f-in-core pseudopotential calculations and corrections of the basis set superposition error by the counterpoise correction leads to very good agreement between the 5f-in-valence and 5f-in-core pseudopotential results for bond lengths, bond angles and binding energies. Results from 5f-in-core pseudopotential calculations using different density functionals also show reasonable agreement with the more rigorous Coupled Cluster results. It is argued that the An 5f rather than the An f population is a useful criterion for the applicability of a specific An 5f-in-core pseudopotential.     

Effects of La<Superscript>3+</Superscript> on inward K<Superscript>+</Superscript> channels at plasma membrane in guard cells

The effects of La³⁺ on inward K⁺ channels at plasma membrane in vicia guard cells are investigated using the whole-cell patch-clamp recording mode. It is shown that La³⁺ on both sides of plasma membrane blocks inward K⁺ currents in a concentration-dependent manner, indicating that La³⁺ binding sites may exist on both sides of plasma membrane in guard cells in vicia. The dose response is fitted by the Michaelis-Menten relation characterized by an inhibitor constant K _i of 2.56±0.25 μmol · L⁻¹ (outside membrane) and (1.18±0.11)×10⁻¹⁵ mol · L⁻¹ (inside membrane). Intracellular La³⁺ has much stronger inhibitory effect on inward K⁺ currents than extracellular La³⁺ does, suggesting there may exist stronger binding sites inside membrane than outside membrane. Since ion channel activities of guard cells directly affect plant stomatal movement and water status, our results imply that rare earth elements might have potential practical values in regulating plant water status and strengthening plant drought endurance.     

Chemiluminescence determination of atenolol in biological fluids by a europium-sensitized permanganate-sulfite system

A simple flow injection chemiluminescence (CL) method was developed for the determination of atenolol using Eu³⁺ as the probe. It was found that the weak CL generated by the KMnO₄-Na₂SO₃ reaction can be significantly enhanced by the atenolol-Eu³⁺ complex. The experimental conditions were optimized. The CL intensity was linearly related to atenolol concentration in the range from 8.0 × 10⁻⁹ to 1.0 × 10⁻⁵ g mL⁻¹. The detection limit (3s _b) was 3 × 10⁻⁹ g mL⁻¹ and the relative standard deviation for 1.0 × 10⁻⁷ g mL⁻¹ atenolol solution was 2.4% (n = 11). The method has high sensitivity, wide linear range, inexpensive instrumentation, and has been applied to the determination of atenolol in spiked human urine and plasma samples with recoveries within the range 95.5–104.0%. Supplementary material to this paper is available in electronic form at Electronic supplementary material: Discussion of the reaction mechanism and additional figures are available online as electronic supplementary material (ESM) at . Correspondence: Jianxiu Du, Key Laboratory of Analytical Chemistry for Life Science of Shaanxi Province, School of Chemistry and Materials Science, Shaanxi Normal University, Xi’an 710062, P.R. China     

A Novel Enhancing Flow-Injection Chemiluminescence Method for the Determination of Glutathione Using the Reaction of Luminol with Hydrogen Peroxide

 A rapid flow-injection method with chemiluminescence (CL) detection is described for the determination of glutathione (GSH). The method is based on the CL reaction of luminol and hydrogen peroxide. GSH can greatly enhance the chemiluminescence intensity in 0.1 mol/L borax–sodium hydroxide buffer solution (pH = 9.7). The maximum CL intensity was directly proportional to the concentration of GSH in the range 3.0 × 10⁻⁷–2.0 × 10⁻⁵ mol/L, and the detection limit was 6.8 × 10⁻⁸ mol/L. The relative standard deviation was 3.4% for 5.0 × 10⁻⁶ mol/L of GSH (n = 11). Received October 23, 2001; accepted June 18, 2002     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

Sorption behavior of Am<Superscript>3+</Superscript> on suspended pyrite

Sorption behavior of ²⁴¹Am (~10⁻⁹ M) on naturally occurring mineral pyrite (particle size: ≤70 μm) has been studied under varying conditions of pH (2–11), and ionic strength (0.01–1.0 M (NaClO₄)). The effects of humic acid (2 mg/L), other complexing anions (1 × 10⁻⁴ M CO₃ ²⁻, SO₄ ²⁻, C₂O₄ ²⁻ and PO₄ ³⁻), di- and trivalent metal ions (1 × 10⁻³ M Mg²⁺, Ca²⁺ and Nd³⁺) on sorption behavior of Am³⁺ at a fixed ionic strength (I = 0.10 M (NaClO₄)) have been studied. The sorption of ²⁴¹Am on pyrite increased with pH from 2.8 (84%) to 8.1 (97%). The sorption of ²⁴¹Am decreased with ionic strength at low pH values (2 ≤ pH ≤ 4), but was insensitive in the pH range of 4–10, suggesting the formation of outer-sphere complexes on pyrite surface at lower pH, and inner-sphere complexes at higher pH values. The sorption of ²⁴¹Am increased in the presence of (i) humic acid (5 < pH < 7.5), and (ii) C₂O₄ ²⁻ (2 < pH < 3). By contrast, other complexing anions such as (carbonate, phosphate, and sulphate) showed negligible influence on ²⁴¹Am sorption. The presence of Mg²⁺, Ca²⁺ ions showed marginal effect on the sorption profile of ²⁴¹Am; while the presence of Nd³⁺ ion suppressed its sorption significantly under the conditions of present study. The sorption of ²⁴¹Am on pyrite decreased with increased temperature indicating an exothermic process.     

Master sintering curve for Gd-doped CeO<Subscript>2</Subscript> solid electrolytes

The sintering behavior of gadolinia-doped ceria powders was studied by the master sintering curve (MSC). Dilatometric analyses of powders produced by a soft chemical method were performed to provide the experimental data set for the construction of the MSC. The assumed model provided good fittings of the MSC and the activation energy for the sintering of Ce_1−x Gd _x O_3−δ, with x = 0, 0.05, 0.1, and 0.2 were found to be in the 218–325 KJ/mol range, depending on the dopant content. The results supported that both the nanometric size of the particles and the difference in ionic radii between Gd³⁺ and Ce⁴⁺ affects the sintering of Gd-doped CeO₂.     

Simultaneous determination of catechol and hydroquinone based on poly (diallyldimethylammonium chloride) functionalized graphene-modified glassy carbon electrode

Simultaneous determination of catechol (CC) and hydroquinone (HQ) were investigated by voltammetry based on glassy carbon electrode (GCE) modified by poly (diallyldimethylammonium chloride) (PDDA) functionalized graphene (PDDA-G). The modified electrode showed excellent sensitivity and selectivity properties for the two dihydroxybenzene isomers. In 0.1 mol/L phosphate buffer solution (PBS, pH 7.0), the oxidation peak potential difference between CC and HQ was 108 mV, and the peaks on the PDDA-G/GCE were three times as high as the ones on graphene-modified glass carbon electrode. Under optimized conditions, the PDDA-G/GCE showed wide linear behaviors in the range of 1 × 10⁻⁶−4 × 10⁻⁴ mol/L for CC and 1 × 10⁻⁶−5 × 10⁻⁴ mol/L for HQ, with the detection limits 2.0 × 10⁻⁷ mol/L for CC and 2.5 × 10⁻⁷ mol/L for HQ (S/N = 3) in mixture, respectively. Some kinetic parameters, such as the electron transfer number (n), charge transfer coefficient (α), and the apparent heterogeneous electron transfer rate constant (k _s), were calculated. The proposed method was applied to simultaneous determine CC and HQ in real water samples of Yellow River with satisfactory results.     

Formation of excited uranyl in oxidation of tetravalent uranium with oxygen in HClO<Subscript>4</Subscript> aqueous solutions: IV. Enhancement of the chemiluminescent reaction in the presence of Fe<Superscript>2+</Superscript>

Experimental data that support the hypothesis on the determining role of ^•OH radicals in the emergence of luminescence during the oxidation of U(IV) with atmospheric oxygen in aqueous HClO₄ solutions have been obtained using the H₂O₂-FeSO₄ system as a source of OH radicals. It has been found that brighter chemiluminescence (CL) is observed in the presence of 10⁻⁵ mol/l Fe²⁺ in a 5 × 10⁻⁴ mol/l U(IV) solution in 0.1 mol/l HClO₄ compared with the FeSO₄-free solution. The CL yield in the presence of Fe²⁺ (η_CL = 3.9 × 10⁻⁸) is 2.8 times that in the solution without iron (η_CL = 1.4 × 10⁻⁸). These results can be regarded as a further piece of evidence for the idea that the elementary event of the formation of a CL emitter—electronically excited uranyl ion *(UO₂²⁺)—in radical chain U(IV) oxidation reactions is electron transfer from the uranoyl ion (UO₂⁺) to the oxidant, the ^•OH radical. Thus, one of the main prerequisites for light emission during U(IV) oxidation reactions is a high generation efficiency of ^•OH radicals and their easy access to the uranoyl UO₂⁺ ion.     

PuPO<Subscript>4</Subscript>(cr,hyd.) Solubility Product and Pu<Superscript>3+</Superscript> Complexes with Phosphate and Ethylenediaminetetraacetic Acid

To determine the solubility product of PuPO₄(cr, hyd.) and the complexation constants of Pu(III) with phosphate and EDTA, the solubility of PuPO₄(cr, hyd.) was investigated as a function of: (1) time and pH (varied from 1.0 to 12.0), and at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration; (2) NaH₂PO₄ concentrations varying from 0.0001 mol⋅L⁻¹ to 1.0 mol⋅L⁻¹ and at a fixed pH of 2.5; (3) time and pH (varied from 1.3 to 13.0) at fixed concentrations of 0.00032 mol⋅L⁻¹ phosphate and 0.0004 mol⋅L⁻¹ or 0.002 mol⋅L⁻¹ Na₂H₂EDTA; and (4) Na₂H₂EDTA concentrations varying from 0.00005 mol⋅L⁻¹ to 0.0256 mol⋅L⁻¹ at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration and at pH values of approximately 3.5, 10.6, and 12.6. A combination of solvent extraction and spectrophotometric techniques confirmed that the use of hydroquinone and Na₂S₂O₄ helped maintain the Pu as Pu(III). The solubility data were interpreted using the Pitzer and SIT models, and both provided similar values for the solubility product of PuPO₄(cr, hyd.) and for the formation constant of PuEDTA⁻. The log ₁₀ of the solubility product of PuPO₄(cr, hyd.) [PuPO₄(cr, hyd.) \rightleftarrows\rightleftarrows Pu³⁺+PO₄^3-\mathrm{Pu}^{3+}+\mathrm{PO}_{4}^{3-}] was determined to be −(24.42±0.38). Pitzer modeling showed that phosphate interactions with Pu³⁺ were extremely weak and did not require any phosphate complexes [e.g., PuPO₄(aq), PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+}, Pu(H₂PO₄)₂⁺\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{2}^{+}, Pu(H₂PO₄)₃(aq), and Pu(H₂PO₄)₄^-\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{4}^{-}] as proposed in existing literature, to explain the experimental solubility data. SIT modeling, however, required the inclusion of PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+} to explain the data in high NaH₂PO₄ concentrations; this illustrates the differences one can expect when using these two different chemical models to interpret the data. Of the Pu(III)-EDTA species, only PuEDTA⁻ was needed to interpret the experimental data over a large range of pH values (1.3–12.9) and EDTA concentrations (0.00005–0.256 mol⋅L⁻¹). Calculations based on density functional theory support the existence of PuEDTA⁻ (with prospective stoichiometry as Pu(OH₂)₃EDTA⁻) as the chemically and structurally stable species. The log ₁₀ value of the complexation constant for the formation of PuEDTA⁻ [ Pu³⁺+EDTA^4-\rightleftarrows PuEDTA^-\mathrm{Pu}^{3+}+\mathrm{EDTA}^{4-}\rightleftarrows \mathrm{PuEDTA}^{-}] determined in this study is −20.15±0.59. The data also showed that PuHEDTA(aq), Pu(EDTA)₄^5-\mathrm{Pu(EDTA)}_{4}^{5-}, Pu(EDTA)(HEDTA)⁴⁻, Pu(EDTA)(H₂EDTA)³⁻, and Pu(EDTA)(H₃EDTA)²⁻, although reported in the literature, have no region of dominance in the experimental range of variables investigated in this study.     

Study on physicochemical properties of U<Superscript>3+</Superscript> in LiCl–KCl eutectic media at 773 K

In order to enhance the efficiency of pyrochemical technology, especially electrorefining process, physicochemical data of trivalent uranium in LiCl–KCl eutectic at 773 K were measured, including molar absorptivity, formal potential and diffusion coefficient of U³⁺ ions. The molar absorptivities of U³⁺ were determined to be 765 ± 48 and 686 ± 39 M⁻¹ cm⁻¹ at 465 and 550 nm, respectively. The formal potential of U³⁺/U⁴⁺ redox couple and diffusion coefficient of U³⁺ ions were measured to be −0.308 V vs. Ag/Ag⁺ and 8.7 × 10⁻⁶ M⁻¹ cm⁻¹, respectively. To elucidate the chemical behavior of U³⁺ ions under the existence of oxide ions, U³⁺ ions were reacted with oxides ions in situ produced at the LiCl–KCl media. Surprisingly, it was revealed from XRD patterns that UO₂ was formed from the reaction between U³⁺ ions and O²⁻ ions with the molar ratio of 1:1.     

Effects of Temperature and Common Ions on Binding of Puerarin to BSA

The effects of temperature and common ions on binding of puerarin to bovine serum albumin (BSA) are investigated. The binding constants (K _a) between puerarin and BSA are 1.13×10⁴ L⋅mol⁻¹ (20 °C) and 1.54×10⁴ L⋅mol⁻¹ (30 °C), and the number of binding sites (n) is (0.95±0.02). However, at a higher temperature (40 °C) the stability of the puerarin–BSA system decreases, which results in a lower binding constant (1.58×10³ L⋅mol⁻¹) and number of binding sites (n=0.73) of the puerarin–BSA system. However, the presence of Cu²⁺ and Fe³⁺ ions increases the binding constants and the number of binding sites in the puerarin–BSA complex.     

Electrochemistry at cobalt(II)tetrasulfophthalocyanine-multi-walled carbon nanotubes modified glassy carbon electrode: a sensing platform for efficient suppression of ascorbic acid in the presence of epinephrine

Electrochemistry of water-soluble cobalt(II) tetrasulfophthalocyanine (CoTSPc) electrodeposited on glassy carbon nanotube pre-modified with acid-functionalized multi-walled carbon nanotubes (MWCNT) is described. Both charge transfer resistances toward [Fe(CN)₆]^3−/4− redox probe and electrocatalytic responses toward epinephrine (EP) detection follow the trend: bare GCE < GCE-MWCNT < GCE-CoTSPc < GCE-MWCNT-CoTSPc. EP analysis was then carried out in details using GCE-MWCNT-CoTSPc. The catalytic rate constant value k _ch = 2.2 × 10⁷ (mol cm⁻³)⁻¹ s⁻¹ was obtained from rotating disk electrode experiment. Interestingly, GCE-MWCNT-CoTSPc efficiently suppressed the detection of ascorbic acid (the natural interference of neurotransmitters in physiological conditions) showing good sensitivity (0.132 ± 0.003 A l mol⁻¹), limit of detection (4.517 × 10⁻⁷ mol l⁻¹), and quantification (15.056 × 10⁻⁷ mol l⁻¹). In addition, GCE-MWCNT-CoTSPc was conveniently used to determine EP in epinephrine hydrochloric acid injection with recovery of 101.1 ± 2.2%.     

A microchip sensor for calcium determination

A newly designed glass-PDMS microchip-based sensor for use in the determination of Ca²⁺ ions has been developed, utilizing reflectance measurements from arsenazo III (1,8-dihydroxynaphthalene-3,6-disulfonic acid-2,7-bis[(azo-2)-phenyl arsenic acid]) immobilized on the surface of polymer beads. The beads, produced from cross-linked poly(p-chloromethylstyrene) (PCMS), were covalently modified with polyethylenimine (PEI) to which the Arsenazo III could be adsorbed. The maximum amount of Arsenazo III which could be immobilized onto the PEI-attached PCMS beads was found to be 373.71 mg g⁻¹ polymer at pH 1. Once fabricated, the beads were utilized at the detection point of the microfluidic sensor device with a fiber optic assembly for reflectance measurements. Samples were mobilized past the detection point in the sensor where they interact with the immobilized dye. The sensor could be regenerated and re-used by rinsing with HCl solution. The pH, voltage, linear range, and the effect of interfering ions were evaluated for Ca²⁺ determination using this microchip sensor. At the optimum potential, 0.8 kV, and pH 9.0, the linear range of the microchip sensor was 3.57 × 10⁻⁵ – 5.71 × 10⁻⁴ M Ca²⁺, with a limit of detection (LOD) of 2.68 × 10⁻⁵ M. The microchip biosensor was then applied for clinical analysis of calcium ions in serum with good results. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Determination of Kinetic Parameters in the Biosorption of Cr (VI) on Immobilized <Emphasis Type="Italic">Bacillus cereus</Emphasis> M<Superscript>1</Superscript><Subscript>16</Subscript> in a Continuous Packed Bed Column Reactor

Due to technological advancement, environment suffers from untreated toxic heavy metal bearing effluent coming from different industries. Chromium (VI) is one of those heavy metals having adverse impact on ecological balance, human, and plant health because of its carcinogenic properties. Biosorption is presented as an alternative to traditional technologies which are costly and inefficient for treatment of industrial wastes containing low amount of heavy metals. In this study, bioremediation of Cr (VI) ions by immobilized Bacillus cereus M¹ ₁₆ was investigated in a laboratory scale packed bed up-flow column reactor. The effect of important parameters, such as the inlet flow rate, influent concentration, and effective bed height, has been studied. External mass transfer, surface adsorption, and intrabead mass transfer were also studied to conclude the rate limiting step for removal of Cr (VI) and to determine the process parameters which are important for biosorption optimization. The external mass transfer coefficient was calculated at different flow rates (6.51 × 10⁻² to 7.58 × 10⁻² cm/min). Using the model, the surface adsorption rate constant (k _ad) and the intrabead mass transfer coefficient (k _i) were predicted as 0.0267 × 10⁻³ and 0.7465 × 10⁻³ l/g/min, respectively. Both are much lower than the external mass transfer coefficient (k _e). The surface adsorption phenomenon is acting as the rate-limiting step due to its high resistance for removal of Cr (VI).     

Solid state electrochemical of the erbium hexacyanoferrate-modified carbon ceramic electrode and its electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-cysteine

A kind of erbium hexacyanoferrate (ErHCF)-modified carbon ceramic electrodes (CCEs) fabricated by mechanically attaching ErHCF samples to the surface of CCEs derived from sol–gel technique was proposed. The resulting modified electrodes exhibit well-defined redox responses with the formal potential of +0.215 V [vs saturated calomel electrode (SCE)] at a scan rate of 20 mV s⁻¹ in 0.5 M KCl (pH 7) solution. The voltammetric characteristics of the ErHCF-modified CCEs were investigated by voltammetry. Attractively, the ErHCF-modified CCEs presented good electrocatalytic activity with a marked decrease in the overvoltage about 400 mV for l-cysteine oxidation. The calibration plot for l-cysteine determination was linear at 5.0 × 10⁻⁶–1.3 × 10⁻⁴ M with a linear regression equation of I(A) = 0.558 + 0.148c (μM) (R ² = 0.9989, n = 20), and the detection limit was 2 × 10⁻⁶ M (S/N = 3). At last, the ErHCF-modified CCEs were used for amperometric detection of l-cysteine in real samples.     

Electrochemiluminescence DNA sensor based on Ru(bpy) 3 2+ -doped silica nanoparticle labeling and proximity-dependent surface hybridization assay

A new electrochemiluminescence (ECL) method based on the proximity-dependent surface hybridization assay and Ru(bpy)₃²⁺-doped silica nanoparticles (Ru-DSNPs) as labels were proposed for detecting DNA. The hybridization process involves two steps: firstly, the 3′ thiolated capture probe was self-assembled on the gold electrode. Secondly, the proximity-dependent surface hybridization assay was carried out. This proximity-dependent surface hybridization assay depended on the simultaneous recognition of a target DNA by a capture probe and Ru-DSNP-labeled probe and the formation of a duplex complex, which results in the luminophor approach to the electrode surface. Thus, sensitive ECL signals were obtained. Under optimum conditions, the intensity of the ECL of Ru-DSNPs was linearly related to the concentration of the target sequence in the range of 2.0 × 10⁻¹⁵ to 2.0 × 10⁻¹¹ mol/L. The detection limit was 1.0 × 10⁻¹⁵ mol/L (S/N = 3).     

Tripodal chelating ligand-based sensor for selective determination of Zn(II) in biological and environmental samples

Potassium hydrotris(N-tert-butyl-2-thioimidazolyl)borate [KTt^t-Bu] and potassium hydrotris(3-tert-butyl-5-isopropyl-l-pyrazolyl)borate [KTp^t-Bu,i-Pr] have been synthesized and evaluated as ionophores for preparation of a poly(vinyl chloride) (PVC) membrane sensor for Zn(II) ions. The effect of different plasticizers, viz. benzyl acetate (BA), dioctyl phthalate (DOP), dibutyl phthalate (DBP), tributyl phosphate (TBP), and o-nitrophenyl octyl ether (o-NPOE), and the anion excluders sodium tetraphenylborate (NaTPB), potassium tetrakis(p-chlorophenyl)borate (KTpClPB), and oleic acid (OA) were studied to improve the performance of the membrane sensor. The best performance was obtained from a sensor with a of [KTt^t-Bu] membrane of composition (mg): [KTt^t-Bu] (15), PVC (150), DBP (275), and NaTPB (4). This sensor had a Nernstian response (slope, 29.4 ± 0.2 mV decade of activity) for Zn²⁺ ions over a wide concentration range (1.4 × 10⁻⁷ to 1.0 × 10⁻¹ mol L⁻¹) with a limit of detection of 9.5 × 10⁻⁸ mol L⁻¹. It had a relatively fast response time (12 s) and could be used for 3 months without substantial change of the potential. The membrane sensor had very good selectivity for Zn²⁺ ions over a wide variety of other cations and could be used in a working pH range of 3.5–7.8. The sensor was also found to work satisfactorily in partially non-aqueous media and could be successfully used for estimation of zinc at trace levels in biological and environmental samples. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Determination of cobalt in biological materials by RNAA via induced short-lived 60mCo

A chemiluminescence (CL) micro-flow system is presented for rapid determination of chemical oxygen demand (COD) in water at room temperature. In this system, potassium dichromate is reduced to Cr³⁺ in 2 mol L⁻¹ H₂SO₄ during the chemical oxidation of COD substances in the sample, and Cr³⁺ can be measured with the help of the luminol-H₂O₂ CL system. The polymethyl methacrylate micro-flow chip with discrete microdroplet sampling was used here. Effects on COD determination (such as pH, concentrations, the channel length, and interference) were investigated. The linear range for COD determination was 0.27–10 g L⁻¹, and the detection limit was 100 mg L⁻¹. The method was successfully applied to the determination of COD in wastewater samples. The data obtained with the present method were in fairly good agreement with those obtained by the titrimetric method. Correspondence: Zhujun Zhang, Key Laboratory of Analytical Chemistry for Life Science of Shaanxi Province, School of Chemistry and Materials Science, Shaanxi Normal University, Xi’an 710062, P.R. China; Department of Chemistry, Institute of Analytical Science, Southwest University, Beibei, Chongqing 400715, P.R. China     

Binding properties of a monoclonal antibody against the Cry1Ab from <Emphasis Type="Italic">Bacillus Thuringensis</Emphasis> for the development of a capillary electrophoresis competitive immunoassay

Experimental work performed was aimed at the assessment of a competitive capillary electrophoresis immunoassay with laser-induced fluorescence (CEIA-LIF) detection for the determination of the Cry1Ab endotoxin from Bacillus thuringensis. The binding constant of a monoclonal antibody, raised against the insecticide protein Cry1Ab, was determined on a microplate by indirect enzyme-linked immunosorbent assay (ELISA) and compared with that obtained in-capillary under nonequilibrium separation conditions. The two binding constants appear comparable—(5.0 ± 1.2) × 10⁶ M⁻¹ and (9.06 ± 5.7) × 10⁶ M⁻¹—reflecting good preservation of the antibody binding behavior in the capillary electrophoresis format. These results allow use of a calibration curve possible between 0.2 and 150 nM of endotoxin protein, with a limit of detection of 0.5 nM (33 μg L⁻¹). Preliminary recovery experiments on maize extracts spiked with known amounts of Cry1Ab endotoxin also showed promising results in detecting the toxin in complex real matrices.