Axi-symmetric wave propagation in a cylinder coated with a piezoelectric layer

This paper presents the wave propagation in a cylinder coated with a thin piezoelectric layer. The piezoelectric coupling effects are fully modeled in the mechanics model for this piezoelectric coupled cylindrical shell with bending resistance. The decoupled torsional wave velocity and the dispersion curves for the two- mode shell model are obtained theoretically. The cut-off frequency and phase velocities at limit wave number are also derived. The numerical simulations are conducted to present the results of wave propagation in this cylindrical shell and as well as to compare the results by the current bending theory and the membrane shell theory. From the comparisons, the results display obvious deference of wave propagations in terms of dispersion characteristics by different shell theories when thicker piezoelectric layer are used and when higher wave number is considered. The results of this paper can serve as a reference for future study on wave propagation in coupled structures as well as in the design of smart structures incorporating piezoelectric materials.     

Nonlocal shell model for elastic wave propagation in single- and double-walled carbon nanotubes

This paper investigates the transverse and torsional wave in single- and double-walled carbon nanotubes (SWCNTs and DWCNTs), focusing on the effect of carbon nanotube microstructure on wave dispersion. The SWCNTs and DWCNTs are modeled as nonlocal single and double elastic cylindrical shells. Molecular dynamics (MD) simulations indicate that the wave dispersion predicted by the nonlocal elastic cylindrical shell theory shows good agreement with that of the MD simulations in a wide frequency range up to the terahertz region. The nonlocal elastic shell theory provides a better prediction of the dispersion relationships than the classical shell theory when the wavenumber is large enough for the carbon nanotube microstructure to have a significant influence on the wave dispersion. The nonlocal shell models are required when the wavelengths are approximately less than 2.36×10⁻⁹ and 0.95×10⁻⁹ m for transverse wave in armchair (15,15) SWCNT and torsional wave in armchair (10,10) SWCNT, respectively. Moreover, an MD-based estimation of the scale coefficient e₀ for the nonlocal elastic cylindrical shell model is suggested. Due to the small-scale effects of SWCNTs and the interlayer van der Waals interaction of DWCNTs, the phase difference of the transverse wave in the inner and outer tube can be observed in MD simulations in wave propagation at high frequency. However, the van der Waals interaction has little effect on the phase difference of transverse wave.     

Attenuated Wave Field in Fluid-Saturated Porous Medium with Excitations of Multiple Sources

This research addresses the investigation of an elastic wave field in a homogeneous and isotropic porous medium which is fully saturated by a Newtonian viscous fluid. A new methodology is developed for describing the wave field in the medium excited by multiple energy sources. To quantify the relative displacements between the fluid and solid of the medium, the governing equations of the elastic wave propagation are derived in the form of displacements specially. The velocities and attenuation of the waves are considered as functions of viscosity and frequency. Making use of the Hankel function and the moving-coordinate method, a model of the wave motion with multiple cylindrical wave sources is built. Making use of the model established in this research, the relative displacement between the fluid and the solid can be quantified, and the wave field in the porous media can then be determined with the given energy sources. Numerical simulations of cylindrical waves from multiple energy sources propagating in the porous medium saturated by viscous fluid are performed for demonstrating the practicability of the model developed.     

Vibration characteristics of FGM circular cylindrical shells filled with fluid using wave propagation approach

The vibration characteristics of a functionally graded material circular cylindrical shell filled with fluid are examined with a wave propagation approach. The shell is filled with an incompressible non-viscous fluid. Axial modal dependence is approximated by exponential functions. A theoretical study of shell vibration frequencies is analyzed for simply supported-simply supported, clamped-simply supported, and clamped-clamped boundary conditions with the fluid effect. The validity and the accuracy of the present method are confirmed by comparing the present results with those available in the literature. Good agreement is observed between the two sets of results.     

Analysis of wave propagation in piezoelectric coupled cylinder affected by transverse shear and rotary inertia

In this paper, we examine the wave propagation in a piezoelectric coupled cylindrical shell affected by the shear effect and rotary inertia. A complete mathematical analysis of wave propagation solution in this piezoelectric coupled cylindrical shell is provided. The dispersion characteristics are derived through the solving an eigenvalue problem. Results are validated by the classical solution of a metallic cylinder. Besides providing and discussing the dispersion curves for different wave modes, we also examine the piezoelectric effects on the dispersion curves. Further to the above investigation, comparison of dispersion solutions from different shell theories is also conducted. This work may serve as a benchmark for wave propagation in piezoelectric coupled cylindrical shells.     

表面加工塑性层对金属柱壳剪切带自组织单旋起始的影响

在外爆加载金属柱壳高速坍塌过程中, 发生塑性变形失稳形成的剪切带具有高度的自组织特征, 甚至出现剪切带排列的单旋现象—剪切带在顺时针和逆时针两个方向呈现一个方向占优的现象. 柱壳在坍塌时, 最大剪切应力位于柱壳内表面, 剪切带的形核及扩展行为受内表面材料介观状态的影响显著. 本文通过选材和控制柱壳加工工艺, 获得了内表面具有不同厚度塑性层的20钢柱壳, 采用厚壁圆筒实验技术, 研究了表面加工塑性层对金属柱壳绝热剪切带自组织单旋现象起始的影响规律及其物理机制. 研究结果表明, 金属柱壳内表面加工塑性层显著改变了试样剪切带的起始条件, 沿顺时针或逆时针方向排列的剪切带形核数量在总剪切带数量中所占比例取决于表面加工塑性层的厚度和晶粒取向, 具有单一晶粒拉伸方向的较厚塑性层样品更容易形成单向螺旋剪切带结构. 在相同变形条件下, 随着塑性层厚度增加, 剪切带平均形核速率和扩展速率增大, 剪切带平均间距减小. 结果可为理解金属柱壳在高速塌陷过程中绝热剪切带占优取向现象提供有价值的参考.      

Free vibration of circular cylindrical shell with constrained layer damping

Free vibration characteristics of circular cylindrical shell with passive constrained layer damping (PCLD) are presented. Wave propagation approach rather than finite element method, transfer matrix method, and Rayleigh-Ritz method is used to solve the problem of vibration of PCLD circular cylindrical shell under a simply supported boundary condition at two ends. The governing equations of motion for the orthotropic cylindrical shell with PCLD are derived on the base of Sanders’ thin shell theory. Numerical results show that the present method is more effective in comparison with other methods. The effects of the thickness of viscoelastic core and constrained layer, the elastic modulus ratio of orthotropic constrained layer, the complex shear modulus of viscoelastic core on frequency parameter, and the loss factor are discussed.     

含裂纹损伤充液圆柱壳的振动响应求解方法

薄壁圆柱壳流体冲击振动响应是一个复杂的流固耦合(FSI)动力学问题,对于薄壳状态监测与缺陷识别具有重要意义。基于Flügge壳体应力理论,得到壳体运动的高阶偏微分方程组(PDE),利用波传播方法获得圆柱壳系统振动响应。将壳体周围流体定义为理想声学介质,通过亥姆霍兹方程描述声压场,得到流固耦合条件下的薄壁圆柱壳受迫振动响应演变规律。针对薄壳裂纹损伤识别问题,基于断裂力学理论建立局部柔度矩阵,结合呼吸型线弹簧模型(LSM),构造裂纹附近应力及位移连续条件,获得含裂纹损伤充液圆柱壳的振动响应,进而给出一种基于振动能量流的裂纹损伤识别方法。研究结果表明：充液圆柱壳耦合系统在非线性激励下,位移响应在沿轴向、周向和径向的传播特性差异明显;裂纹的存在会导致结构局部柔度的降低和耦合系统固有频率下降;归一化输入功率流能够有效地对充液圆柱壳耦合系统进行结构裂纹损伤识别。研究结果可为充液薄壳振动响应方面的研究提供有益参考,也可为流固耦合条件下的结构裂纹损伤识别方面提供技术支持。     

密度梯度柱壳链的弹性波传播特性研究

均匀圆柱壳链可以调控弹性波传播,引入密度梯度有望进一步提高波形调控能力.通过建立密度梯度柱壳链的细观有限元模型和连续介质模型,研究了密度梯度柱壳链的弹性波传播特性.通过将密度梯度柱壳链等效为变密度连续介质弹性杆,建立了其在应力脉冲作用下的控制方程.运用拉普拉斯积分变换方法,考虑杆中密度遵循线性分布,获得了方程的解析解.以三角形应力脉冲作用为例,通过与细观有限元模拟结果比较,发现解析解可以较好地预测梯度柱壳链中载荷的演化趋势.正梯度链中载荷峰值随着波传播逐渐增大,负梯度链中载荷峰值随着波传播逐渐减小.正梯度链支撑端峰值载荷高于均匀链,负梯度链支撑端峰值载荷低于均匀链,这表明相较于均匀柱壳链,密度梯度柱壳链可以在更大范围内对波形进行调控.线性密度梯度参数对梯度柱壳链的波形调控能力影响较大,梯度参数越小,传递到支撑端的峰值载荷越小;相反,梯度参数越大,支撑端的峰值载荷越大.建立的理论模型及其解析解为研究梯度柱壳链中应力波传播规律及揭示载荷调控机理提供了理论基础.     

含环向表面裂纹圆柱壳的波传播特性研究

研究了振动波在含有环向表面裂纹的无限长圆柱壳中的传播特性.圆柱壳体的振动用Flügge方程来描述.运用线弹性断裂力学的理论,考虑到裂纹的张开、滑移和撕裂3种模式以及它们相互之间的耦合,利用分布的线弹簧来模拟裂纹并建立了裂纹所在区域的局部柔度矩阵,得到由此引起的附加位移和壳体中内力之间的关系.在入射波已知的情况下,根据裂纹两侧区域的位移和内力的连续性条件得到了反射和透射波的幅值系数.分析了入射波通过裂纹后的透射、反射系数与激励频率和裂纹尺寸之间的关系.为基于振动功率流方法识别圆柱壳表面损伤提供了理论基础.     

Propagation of torsional surface wave in anisotropic poroelastic medium under initial stress

The present work deals with the possibility of propagation of torsional surface wave in fluid saturated poroelastic layer lying over nonhomogeneous elastic half space. Both the media are assumed to be under compressive initial stress. The half space has two types of inhomogeneity, viz; hyperbolic and quadratic. The dispersion equation for torsional wave in porous layer has been derived and observed that the presence of fluid in pores increases the velocity of the torsional surface wave but the phase velocity diminishes due to the presence of compressive initial stress in the porous layer. It is also observed that the velocity of the torsional surface wave increases due to the increase of initial stress in inhomogeneous half space. The inhomogeneity factor due to quadratic and hyperbolic variations in rigidity, density and initial stress of the medium decreases the phase velocity as it increases.     

冲击载荷作用下柱壳链中的弹性波传播简化模型及其解析解

柱壳链能引起波形的弥散,具备操控波形的潜力。建立了柱壳链结构的等效连续介质模型和细观有限元模型,研究了质量块冲击作用下柱壳链中的弹性应力波传播过程及其几何弥散特性。基于考虑横向惯性修正的Rayleigh-Love波动方程,建立了柱壳链在质量块冲击下的控制方程,采用Laplace变换及其逆变换获得了位移场、速度场和应变场的解析解,所得结果与细观有限元模拟结果较好吻合。结果表明,在冲击过程中应变和速度峰值均逐渐减小,应变峰值、振荡幅度和波形前沿宽度与泊松比和惯性半径相关,泊松比和惯性半径越大,应变峰值越小,应变分布振荡越剧烈,波形前沿宽度越宽。     

非饱和土-隧道系统动力响应计算的波函数法

针对非饱和地基土中埋置隧道的三维动力响应计算问题, 提出了波函数法.采用无限长的Flügge薄壁圆柱壳模拟圆形隧道衬砌,采用流、固、气组成的三相介质模拟非饱和地基土体.分别采用分离变量法以及Helmholtz矢量分解定理求解薄壁圆柱壳的振动控制方程与非饱和土的波动方程.根据隧-土交界面与地表面处的应力、位移以及孔隙流体压力等边界条件,利用平面波与柱面波的转换性质,实现了隧道内作用单位简谐载荷时隧道衬砌与土体系统动力响应的耦合求解.通过与既有单相弹性介质2.5维有限元-边界元法、两相饱和多孔介质2.5维有限元-边界元法以及三相非饱和介质Pip in Pip半解析法的计算结果进行对比, 验证了本文计算方法的可靠性. 最后,基于该方法, 通过算例分析了不同饱和度下非饱和土-隧道系统的动力响应特征.结果表明, 饱和度对土体动位移与超孔隙水压力的幅值响应有较大影响.该方法的非饱和地基土参数退化后,也可用来计算和分析饱和地基土或单相弹性地基土与隧道系统的动力响应.      

Nonlinear stability of advanced sandwich cylindrical shells comprising porous functionally graded material and carbon nanotube reinforced composite layers under elevated temperature

The nonlinear stability of sandwich cylindrical shells comprising porous functionally graded material(FGM) and carbon nanotube reinforced composite(CNTRC)layers subjected to uniform temperature rise is investigated. Two sandwich models corresponding to CNTRC and FGM face sheets are proposed. Carbon nanotubes(CNTs) in the CNTRC layer are embedded into a matrix according to functionally graded distributions. The effects of porosity in the FGM and the temperature dependence of properties of all constituent materials are considered. The effective properties of the porous FGM and CNTRC are determined by using the modified and extended versions of a linear mixture rule, respectively. The basic equations governing the stability problem of thin sandwich cylindrical shells are established within the framework of the Donnell shell theory including the von K'arm'an-Donnell nonlinearity. These equations are solved by using the multi-term analytical solutions and the Galerkin method for simply supported shells.The critical buckling temperatures and postbuckling paths are determined through an iteration procedure. The study reveals that the sandwich shell model with a CNTRC core layer and relatively thin porous FGM face sheets can have the best capacity of thermal load carrying. In addition, unlike the cases of mechanical loads, porosities have beneficial effects on the nonlinear stability of sandwich shells under the thermal load. It is suggested that an appropriate combination of advantages of FGM and CNTRC can result in optimal efficiency for advanced sandwich structures.     

Transmission of waves in a liquid through absorbing layers and subsequent interaction of the waves with an obstacle

The propagation of waves in porous media is investigated both experimentally [1, 2] and by numerical simulation [3–5]. The influence of the relaxation properties of porous media on the propagation of waves has been investigated theoretically and compared with experiments [3, 4]. The interaction of a wave in air that passes through a layer of porous medium before interacting with an obstacle has been investigated with allowance for the relaxation properties [5]. In the present paper, in which the relaxation properties are also taken into account, a similar investigation is made into the interaction with an obstacle of a wave in a liquid that passes through a layer of a porous medium before encountering the obstacle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 53–53, March–April, 1983.     

Wave propagation on a charged surface of a cylindrical liquid column surrounding a long porous core

A mathematical model of wave propagation and instability on a charged surface of an infinite cylindrical column of a conducting fluid, surrounding a coaxial infinite porous core, is formulated and studied. The conditions are found under which the disturbances of the liquid column become unstable and result in its fragmentation into a chain of connected droplets. It is shown that the length of the droplets decreases with increase in the electric field.     

柱壳约束对散心冲击波空间分布的影响

结合实验和数值模拟，研究了散心冲击波在金属柱壳约束下沿有机玻璃内部的空间分布。进行了点起爆柱状炸药驱动飞片加载实验，采用Polyvinylidence Fluoride (PVDF)测试方法对有机玻璃内部的压力进行测试。实验结果显示:在冲击波传播过程中，在特定传播距离处，离中心轴越近，冲击波第一幅值压力越小，这是因为散心冲击驱动飞片成前凸形状，在飞片飞行过程中与有机玻璃碰撞面积越来越大，在远离对称轴部位冲击压力叠加累积效应更强引起的；但在随后的冲击波传播过程中，由于受到柱壳约束影响，离对称轴越近，冲击波幅值越小，这是由散心冲击波在约束柱壳边界反射与冲击波波阵面叠加的结果。通过对炸药网格大变形溢出柱壳翻转进行合理处理，对实验进行了数值模拟。数值模拟结果所得的冲击压力沿径向分布规律计算结果与实验结果定性相符。最后探讨了不同约束程度对这一规律的影响程度，结果表明，后续的冲击波幅值随着约束的增加而急剧增加。     

Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated plate theory （CLPT）. Thus, viscous and inertia coupling in a dynamic equation, as well as stress transfer, thermal and elastic coupling of porous material ave based on the Biot theory. In addition, the wave equations are extracted according to the vibration equation of composite layers. The transmission loss （TL） of the structure is then calculated by solving these equations simultaneously. Statistical energy analysis （SEA） is developed to divide the structure into specific subsystems, and power transmission is extracted with balancing power flow equations of the subsystems. Comparison between the present work and the results reported elsewhere shows excellent agreement. The results also indicate that, although favorable enhancement is seen in noise control particularly at high frequencies, the corresponding parameters associated with fluid phase and solid phase of the porous layer are important on TL according to the boundary condition interfaces. Finally, the influence of composite material and stacking sequence on power transmission is discussed.     

Analytical model of sound transmission through laminated composite cylindrical shells considering transverse shear deformation

Composite structures are often used in the aerospace industry due to the advantages offered by a high strength to weight ratio. Sound transmission through an infinite laminated composite cylindrical shell is studied in the context of the transmission of airborne sound into the aircraft interior. The shell is immersed in an external fluid medium and contains internal fluid. Airflow in the external fluid medium moves with a constant velocity. An exact solution is obtained by simultaneously solving the first-order shear deformation theory （FSDT） of a laminated composite shell and the acoustic wave equations. Transmission losses （TL） obtained from numerical solutions are compared with those of other authors. The effects of structural properties and flight conditions on TL are studied for a range of values, especially, the Mach number, stack sequences, and the angle of warp. Additionally, comparisons of the transmission losses are made between the classical thin shell theory （CST） and FSDT for laminated composite and isotropic cylindrical shells.     

双层碳纳米管中的周向导波

考虑双层碳纳米管的层间范德华力,采用连续介质力学的波动理论,建立了双层碳纳米管中周向导波传播模型,研究周向导波的频散现象.通过与单层碳纳米管结果的比较表明,双层碳纳米管中周向导波的传播表现出更为明显的频散特性,出现更多的模态干涉现象,并发现在某些特殊频率处出现成对模态的消失与新启现象.