A voltammetric sensor is presented for the simultaneous determination of dopamine (DA) and uric acid (UA) in the presence of ascorbic acid (AA). It is based on a gold electrode (GE) modified with carboxyl-functionalized graphene (CFG) and silver nanocube functionalized DA nanospheres (AgNC@PDA-NS). The AgNC@PDA-NS nanocomposite was characterized by scanning electron microscopy and UV-Vis spectroscopy. The electrochemical behavior of the modified electrode was evaluated by electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. The modified electrode displays good electrocatalytic activity towards DA (typically at 0.14 V vs. Ag/AgCl) and UA (typically at 0.29 V vs. Ag/AgCl) even in the presence of ascorbic acid. Response to DA is linear in the concentration range of 2.5 to 130 μM with a detection limit of 0.25 μM. Response to UA is linear in the concentration range of 10 to 130 μM with a detection limit of 1.9 μM. In addition, the sensitivity for DA and UA is 0.538 and 0.156 μA μM?1 cm?2, respectively. The modified electrode also displays good stability, selectivity and reproducibility.
Graphical abstract The gold electrode modified with polydopamine nanospheres functionalized with silver nanocube and carboxylated graphene is used for simultaneous determination of DA and UA in the presence of AA, with wide linear range and low detection limit.
The authors describe a voltammetric sensor for simultaneous determination of dopamine (DA), uric acid (UA), L-tyrosine (Tyr), and the diuretic drug hydrochlorothiazide (HCTZ). The assay is based on the use of graphene nanowalls deposited on a tantalum substrate. The nanowalls are characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, electrochemical impedance spectroscopy, and cyclic voltammetry. The nanowalls are vertically grown on the substrate by direct-current arc plasma jet chemical vapor deposition. The modified electrode is shown to enable simultaneous differential pulse voltammetric determination of DA, UA, Tyr, and HCTZ. The graphene nanowalls display a large specific surface, high conductivity, and a large number of catalytically active sites for oxidation of analytes. Simultaneous detection is performed best at a pH value of 7.0 and at peak potentials of 0.124 V (vs. SCE) for DA, 0.256 V for UA, 0.536 V for Tyr and 0.708 V for HCTZ. The respective detection limits are 0.04 μM, 0.1 μM, 0.6 μM and 0.4 μM. The results show that this graphene wall modified electrode is a promising tool for the design of sensitive, selective, and stable sensors.
Graphical abstract The graphene-based differential pulse voltammetric sensor for simultaneous determination of dopamine, uric acid, L-tyrosine, and hydrochlorothiazide exhibits high selectivity, sensitivity, and stability.
A glassy carbon electrode (GCE) was anodically oxidized by cyclic voltammetry (CV) in 0.05 M sulfuric acid to introduce hydroxy groups on its surface (GCEox). Next, an imidazolium alkoxysilane (ImAS) is covalently tethered to the surface of the GCEox via silane chemistry. This electrode is further modified with graphene oxide (GO) which, dispersed in water, spontaneously assembles on the electrode surface through electrostatic interaction and π-interaction to give an electrode of type GO/ImAS/GCE. Electroreduction of GO and GCEox by CV yields electroreduced GO (erGO) and an electrode of the type erGO/ImAS/GCE. This electrode displays excellent electrocatalytic activity for the oxidation of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Three fully resolved anodic peaks (at ?50 mV, 150 mV and 280 mV vs. Ag/AgCl) are observed during differential pulse voltammetry (DPV). Under optimized conditions, the linear detection ranges are from 30 to 2000 μM for AA, from 20 to 490 μM for UA, and from 0.1 to 5 μM and from 5 μM to 200 μM (two linear ranges) for DA. The respective limits of detection (for an S/N of 3) are 10 μM, 5 μM and 0.03 μM. The GCE modified with erGO and ImAS performs better than a bare GCE or a GCE modified with ImAS only, and also outperforms many other reported electrodes for the three analytes. The method was successfully applied to simultaneous analysis of AA, DA and UA in spiked human urine.
Graphical abstract Differential pulse voltammetric simultaneous determination of ascorbic acid, dopamine and uric acid is achieved on a glassy carbon electrode modified with electroreduced graphene oxide and imidazolium groups, through anodic treatment of glassy carbon and silane chemistry.
We describe a chemical exfoliation method for the preparation of MoS2 nanosheets. The nanosheets were incorporated into poly(3,4-ethylenedioxythiophene) (PEDOT) by electrodeposition on a glassy carbon electrode (GCE) to form a nanocomposite. The modified GCE is shown to enable simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Due to the synergistic effect of MoS2 and PEDOT, this electrode displays better properties in terms of electrocatalytic oxidation of AA, DA and UA than pure PEDOT, which is illustrated by cyclic voltammetry and differential pulse voltammetry (DPV). Under optimum conditions and at pH 7.4, the respective sensitivities and best working potentials are as follows: AA: 1.20 A?mM?1?m?2, 30 mV; DA: 36.40 A?mM?1?m?2, 210 mV; UA: 105.17 A?mM?1?m?2, 350 mV. The calculated detection limits for AA, DA and UA are 5.83 μM, 0.52 μM and 0.95 μM, respectively. The modified electrode was applied to the detection of the three species in human urine samples and gave satisfactory results.
Graphical abstract MoS2 nanosheets were prepared by a facile chemical exfoliation method. MoS2 and poly(3,4-ethylenedioxythiophene) nanocomposite modified glassy carbon electrodes were fabricated, which are shown to enable simultaneous determination of ascorbic acid, dopamine and uric acid with high sensitivity and selectivity.
A composite was prepared from a Co(II)-based zeolitic imidazolate framework (ZIF-67) and graphene oxide (GO) by an in situ growth method. The material was electrodeposited on a glassy carbon electrode (GCE). The modified GCE was used for the simultaneous voltammetric determination of dopamine (DA) and uric acid (UA), typically at working potentials of 0.11 and 0.25 V (vs. SCE). The morphology and structure of the nanocomposite were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction. The modified electrode exhibits excellent electroanalytical performance for DA and UA owing to the synergistic effect of the high electrical conductivity of GO and the porosity of ZIF-67. By applying differential pulse voltammetry, a linear response is found for DA in the 0.2 to 80 μM concentration range, and for UA between 0.8 and 200 μM, with detection limits of 50 and 100 nM (at S/N =?3), respectively. Further studies were performed on the effect of potential interferents, and on electrode stability and reproducibility. The modified GCE was applied to the simultaneous detection of DA and UA in spiked human urine and gave satisfying recoveries.
Graphical abstract Schematic of the preparation procedure of GO-ZIF67 and electrochemical reaction mechanisms of UA and DA at the GO-ZIF67-modified glassy carbon electrode (GCE). GO: graphene oxide; ZIF-67: Co(II)-based zeolitic imidazolate framework.
A voltammetric sensor for both the individual and the simultaneous determination of ascorbic acid (AA), uric acid (UA) and folic acid (FA) is described. It is based on a glassy carbon electrode (GCE) that was modified with bentonite (Bnt) that was first functionalized with cysteine (Cys) to which gold nanoparticles were linked. The resulting material (referred to as Au-Cys-Bnt) and the other materials were characterized by UV-vis spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray analysis and electrochemical methods. The XRD peak positions of bentonite and Cys-functionalized bentonite prove the incorporation of Cys into bentonite. The XPS spectrum of Au-Cys-Bnt confirms the interaction of gold nanoparticles with the thiol group of Cys. The modified GCE displays high electrocatalytic activity for the oxidation of AA, UA and FA, typically at 0.19, 0.41, and 0.73 V (vs. SCE), respectively. Differential pulse voltammetric data show a linear response that covers the 1 μM to 25 mM concentration range for AA, the 1 to 200 μM concentration range for UA, and two linear ranges for FA, one from 5 to 100 μM and one from 100 μM to 1.5 mM. The sensor was applied to the determination of AA, UA and FA in (spiked) multi-vitamin syrup, bird serum and milk samples.
Graphical abstract Schematic of a sensor for simultaneous and individual electrochemical determination of ascorbic, uric, and folic acids in real samples. The sensor consists of a glassy carbon electrode that was modified with a nanocomposite prepared from bentonite that was first functionalized with cysteine to which gold nanoparticles were linked.
The amphiphilic copolymer poly(vinylbenzyl thymine-co-styrene-co-maleic anhydride) (PSVM) was synthesized by radical copolymerization of styrene, vinylbenzyl thymine, and maleic anhydride. Its chemical structure was proven by using 1H nuclear magnetic resonance spectroscopy. PSVM was used as a host to prepare a composite consisting of carbon nanotubes and gold nanoparticles by in-situ reduction. The morphology of the nanocomposites was studied by transmission electron microscopy. A glassy carbon electrode coated with this composite is shown to be a viable sensor for the determination of dopamine (DA), paracetamol (PAT) (both at a pH value of 7), and uric acid (UA) (at pH 6). Two linear relationships exists between amperometric current and analyte concentrations. For DA, the linear analytical ranges are from 0.1 to 200 μM and from 200 to 1000 μM. For PAT, the ranges are from 0.1 to 200 μM and from 200 to 1000 μM. For UA, the ranges are from 0.05 to 1000 μM. The respective limits of detection (for S/N = 3) are 56, 27 and 50 nM. The sensor is highly sensitive, stable, reproducible, and selective.
Graphical abstract A hybrid nanocomposite (CNT/PSVM/Au) of carbon nanotube (CNT) – Au nanoparticle composite based on the amphiphilic copolymer poly(vinylbenzyl thymine/styrene-co-maleic anhydride) (PSVM) was prepared through in situ reduction. This nanocomposite was immobilized on a glassy carbon electrode (GCE) to fabricate an electrochemical sensor to determine dopamine (DA), paracetamol (PAT) and uric acid (UA).
A glassy carbon electrode (GCE) was modified with poly(L-arginine) (P-Arg), reduced graphene oxide (rGO) and gold nanoparticle (AuNP) to obtain an electrode for simultaneous determination of dopamine (DA), serotonin (5-HT) and L-tryptophan (L-Trp) in the presence of ascorbic acid (AA). The modified GCE was prepared via subsequent ‘layer-by-layer’ deposition using an electrochemical technique. The surface morphology of the modified electrode was studied by scanning electron microscopy, and electrochemical characterizations were carried out via cyclic voltammetry and electrochemical impedance spectroscopy. The modified electrode showed excellent electrocatalytic activity toward DA, 5-HT and L-Trp at pH 7.0. Figures of merit for the differential pulse voltammetric reponse are as follows: (a) Response to DA is linear in two intervals, viz. 1.0–50 nM and 1.0–50 μM DA concentration range, the typical working voltage is 202 mV (vs. Ag/AgCl), and the detection limit is 1 nM (at an S/N ratio of 3). For 5-HT, the respective data are 10 to 500 nM and 1.0 to 10 μM, 381 mV, and 30 nM. For L-Trp, the respective data are 10–70 nM and 10–100 μM, 719 mV, and 0.1 μM. The modified GCE is fairly selective. It was successfully applied to the simultaneous determination of DA, 5-HT, and L-Trp in spiked urine samples, and high recovery rates were found.
Graphical abstract Schematic presentation of the voltammetric sensor based on a glassy carbon electrode modified with poly(L-arginine), reduced graphene oxide (rGO) and gold nanoparticle (GCE/P-Arg/ErGO/AuNP) for simultaneous determination of dopamine (DA), serotonin (5-HT) and L-tryptophan (L-Trp).
Three-dimensional structures comprising polypyrrole nanowires (PPyNWs) and molecularly imprinted polymer (MIP) were prepared by electropolymerization on the surfaces of a glassy carbon electrode (GCE). The modified GCE possesses both large surface area and good electrocatalytic activity for oxidizing dopamine (DA), and this leads to high sensitivity. The electropolymerized MIP has a large number of accessible surface imprints, and this makes the GCE more selective. Under optimal conditions and at a working voltage of typically 0.23 V (vs. SCE), the calibration plot is linear in the 50 nM to 100 μM DA concentration range, and the limit of detection is 33 nM. The sensor has been successfully applied to the analysis of DA in injections.
Graphical abstract Schematic of a three-dimensional nanocomposite based dopamine sensing platform based on the use of a molecularly imprinted polymer and poly(pyrrole) nanowires. The modified polypyrrole nanowires and molecularly imprinted polymer endowed high electrocatalytic capacity and good selectivity for dopamine recognition, respectively.
We describe a high-performance nitric oxide (NO) sensor by using a nanocomposite consisting of platinum-tungsten alloy nanoparticles, sheets of reduced graphene oxide and an ionic liquid (PtW/rGO-IL) that was deposited onto the surface of a glassy carbon (GC) electrode. The modified GC electrode exhibits excellent electrocatalytic activity toward the oxidation of NO with a strong peak at 0.78 V vs. Ag/AgCl due to the synergistic effects of bimetallic PtW nanoparticles, reduced graphene oxide nanosheets and an ionic liquid. The sensor possesses a detection limit as low as 0.13 nM, high sensitivity (3.01 μA μM?1 cm2), and good selectivity over electroactive interferents that may exist in biological systems. The sensor was tested to selectively distinguish NO in actual human serum and urine samples, confirming potential practical applications. In our perception, the approach described here may be extended to the fabrication of various kind of composites made from metal nanostructures, graphene and ionic liquids for medical and environmental analysis.
Graphical abstract Enhanced electrochemical sensing of nitric oxide (NO) is demonstrated by utilizing the synergistic effects of bimetallic PtW nanoparticles dispersed on reduced graphene oxide and ionic liquid nanocomposite.
Titanium dioxide nanoparticles (NPs) were synthesized by a sol-gel method from hexafluorotitanic acid using poly(ethylene glycol) as a capping agent. The crystal structure and morphology of the NPs were characterized by X-ray diffraction, FESEM, and TEM. The NPs were used to modify a graphite paste electrode for simultaneous determination of uric acid (UA) and guanine (GU). The effect of calcination temperature on crystal structure and electrocatalytic activity was investigated. The electrochemical responses to UA and GU at bare GP, TiO2–350/GP, and TiO2–600/GP electrodes were compared. The DPV oxidation peaks of UA and GU were found to be strongest at around 304 and 673 mV, respectively, against Ag/AgCl reference electrode, and this are well separated for effective simultaneous determination. UA and GU can be simultaneously determined by this method. Response is linear within the range 0.1–500 μM and 0.1–40 μM for UA and GU, respectively. The detection limits are 70 nM for UA and 50 nM for GU (at an S/N? ratio of?3). The TiO2–600/GP electrode showed excellent analytical performance when analyzing spiked urine and serum samples.
The authors report on an efficient method for the voltammetric sensing of dopamine (DA) by using an electrode modified with alternating monolayers of graphene oxide (GO) and Titanium dioxide (TiO2) nanoparticles anchored GO nanosheets (NSs)). The as-prepared nanostructures were characterized by photoluminescence spectroscopy, powder X-ray diffraction, Raman spectroscopy, FT-IR spectroscopy, transmission electron microscopy, scanning electron microscopy, atomic force microscopy and Energy Dispersive X-ray Analysis (EDAX) techniques. The GO/TiO2 nanocomposite (NC) was deposited on a glassy carbon electrode (GCE), where it displayed an excellent electrocatalytic activity toward the oxidation of DA, owing to its excellent conductivity, high specific surface area, enhanced interfacial contact and more negative zeta potential. Figures of merit include (a) a fast response (5 s), (b) a wide linear range (between 0.2 and 10 μM of DA) (c) a particularly low detection limit (27 nM), (d) a working potential as low as 0.25 V (vs. Ag/AgCl) and (e) a sensitivity of 1.549 μA·μM?1·cm?2. The GO/TiO2/GCE exhibited excellent selectivity over the other interferences as revealed by the differential pulse voltammetric and amperometric studies. The analysis of spiked urine samples resulted in recoveries in the range of 96 to 106%, with RSDs between 3.8 and 5.2%.
Graphical abstract A GO/TiO2 (graphene oxide/titanium dioxide) nanocomposite (NC) was prepared and exploited as electrochemical probes in DA detection. It displays a low detection limit, wide linear range and excellent selectivity.
A composite consisting of chitosan containing azidomethylferrocene covalently immobilized on sheets of reduced graphene oxide was drop-casted on a polyester support to form a screen-printed working electrode that is shown to enable the determination of nitrite by cyclic voltammetry and chronoamperometry. Both reduction and oxidation of nitrite can be accomplished due to the high electron-transfer rate of this electrode. Under optimal experimental conditions (i.e. an applied potential of 0.7 V vs. Ag/AgCl in pH 7.0 solution), the calibration plot is linear in the 2.5 to 1450 μM concentration range, with an ~0.35 μM limit of detection (at a signal-to-noise ratio of 3). The sensor was successfully applied to the determination of nitrite in spiked mineral water samples, with recoveries ranging between 95 and 101 %.
Graphical abstract We describe the design of ferrocene-functionalized reduced graphene oxide electrode and its electrocatalytic properties towards the determination of nitrite. Compared to a reduced graphene oxide electrode, the sensor exhibits enhanced electrocatalytic activity towards both oxidation and reduction of nitrite.
A nanocomposite prepared from reduced graphene oxide (rGO) and silver nanoparticles (AgNPs) is used in an electrochemical aptasensor for the sensitive and selective determination of the antibiotic chloramphenicol (CAP). The nanocomposite was obtained by electrostatic assembly of AgNPs on the surface of polyelectrolyte-functionalized rGO and then used to modify a glassy carbon electrode. The biosensor is then obtained by immobilizing the aptamer against CAP. When incubated with solutions of CAP, the sensor surface is loaded with CAP due to aptamer recognition. The captured CAP can be electrochemically reduced to yield a current that is strongly enhanced as a result of the excellent electrocatalysis property of the graphene/AgNP-nanocomposite. Under optimum conditions, the calibration plot is linear in the 0.01 to 35 μM concentration range, with a 2 nM detection limit (at 3σ). The sensor is reproducible, stable, selective over homologous interferents, and performs excellently when analyzing CAP in milk samples.
Graphical Abstract A graphene/silver nanoparticle-based electrochemical aptasensor is designed for the selective determination of the antibiotic chloramphenicol (CAP). The excellent electrocatalytic reduction of CAP specifically captured onto the electrode surface enables the sensitive electrochemical signal transduction of the biosensor by linear sweep voltammetry (LSV).
We have fabricated, in a single step, carbon ceramic electrodes modified with a poly(acridine orange) film containing reduced graphene oxide. They display electrocatalytic activity to ascorbic acid (AA) and uric acid (UA) at pH 4.5. The anodic peak potentials of AA and UA are separated by 276 mV so that they can be well resolved in cyclic voltammetry. UA and AA were simultaneously determined in a mixture at working potentials of 170 and 400 mV, respectively. Under optimized conditions, the calibration curves for AA and UA cover the 0.8–5,000 μM and 0.6–900 μM concentration range, respectively, while detection limits are 0.3 μM and 0.2 μM. The electrode was applied to determine AA and UA in urine samples.
Figure
DPV curves of RGO–PAO/CCE in the phosphate buffer solution (pH 4.5) containing 5.0?×?10?5 mol L?1 AA with different concentration of UA (a?→?f: 0, 1, 3, 5, 7, 9?×?10?6 mol L?1) 相似文献
A voltammetric analytical assay for the selective quantification of vanillin is described. It is based on the use of a gold nanoparticle-modified screen-printed carbon electrode (SPCE) modified with graphene quantum dots (GQD) in a Nafion matrix. The GQD were synthesized by an acidic thermal method and characterized by UV-Vis, photoluminescence, and FTIR spectroscopy. The modified SPCE displays a strongly enhanced response to vanillin. Linear sweep voltammetry (LSV) and differential pulse voltammetry (DPV) were applied to optimize the methods. The analytical assay has linear responses in the 13 to 660 μM and 0.66 to 33 μM vanillin concentration ranges. The detection limits are 3.9 μM and 0.32 μM when using LSV and DPV, respectively. The analytical assay is selective and stable. It was applied to the determination of vanillin in several food samples with satisfactory results. Recoveries from spiked samples ranged between 92.1 and 113.0%.
Graphical abstract The selective and sensitive quantification of vanillin is carried out by the use of a gold nanoparticle-modified screen-printed carbon electrode modified with graphene quantum dots in a Nafion matrix.
The authors describe a method for amperometric determination of thiodiglycol (TDG), the main hydrolysis product of sulfur mustard. The electrode consists of a mixture of graphene nanosheets, silver nanoparticles and the ionic liquid octylpyridinium hexafluorophosphate. Electrochemical oxidation of TDG was performed by cyclic voltammetry at pH 4 and revealed a pair of well-defined redox peaks at potentials of 0.43 and 0.19 V (vs. Ag/AgCl). Amperometric detection was accomplished over a dynamic range that is linear in the 10–3700 μM concentration range. The detection limit (at an S/N of 3) is 6 μM. The electrode was applied to the determination of TDG in (spiked) waste water and gave recoveries that ranged from 98.2 to 103.3 %.
Graphical abstract The article describes an amperometric sensor for the determination of thiodiglycol, the main hydrolysis product of sulfur mustard. The electrode was constructed by using graphene nanosheets, silver nanoparticles and an ionic liquid electrode, and it was successfully applied to the determination of thiodiglycol in (spiked) waste water samples.
A nanocomposite (designated as PAG) possessing amphiphilic properties was prepared by a single-step method from graphene oxide and phytic acid, in which phytic acid acts as both an inducer and cross-linking agent. The morphology and microstructure of PAG were characterized by nitrogen adsorption, scanning electron microscopy and transmission electron microscopy. The PAG possess a 3 dimensional network structure with interpenetrated nano- and micropores and represent a viable adsorbent for solid-phase extraction of carbamate pesticides prior to their quantitation by high performance liquid chromatography. Under optimum conditions, the calibration plot is linear in the 0.5 to 80 ng g?1 concentration range in case of apple samples, and in the 1.0 to 80 ng mL?1 range for juice samples. The respective limits of detection (for S/N = 3) are between 0.05 and 0.1 ng g?1, and between 0.2 and 0.3 ng mL?1. The PAG has a high adsorption capability, and in our preception it may become a useful adsorbent for the preconcentration of other organic pollutants.
Graphical Abstract A amphiphilic nanocomposite (prepared from phytic acid and graphene oxide; denoted as PAG) was prepared by a single-step method. Phytic acid acts as both an inducer and cross-linking agent. The PAG was used as an adsorbent to extract carbamates from apple and juice samples.
A photoelectrochemical wire microelectrode was constructed based on the use of a TiO2 nanotube array with electrochemically deposited CdSe semiconductor. A strongly amplified photocurrent is generated on the sensor surface. The microsensor has a response in the 0.05–20 μM dopamine (DA) concentration range and a 16.7 μM detection limit at a signal-to-noise ratio of 3. Sensitivity, recovery and reproducibility of the sensor were validated by detecting DA in spiked human urine, and satisfactory results were obtained.
Graphical abstract Schematic of a sensitive photoelectrochemical microsensor based on CdSe modified TiO2 nanotube array. The photoelectrochemical microsensor was successfully applied to the determination of dopamine in urine samples.
Reduced graphene oxide hollow microspheres (rGO HMS) were encapsulated with gold nanoparticles (AuNPs) by spray drying. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction and Raman spectroscopy were used to characterize the AuNP/rGO HMS. When placed on a glassy carbon electrode (GCE), it exhibits excellent electrochemical catalytic properties towards the oxidation of nitrite. The electrocatalytic properties were studied using various electrochemical techniques. Compared to AuNP-decorated graphene sheet based electrodes documented in the literature, the one presented here provides a larger surface area. This enhances the catalytic activity towards nitrite. The electrode, typically operated at a working potential of 0.82 V (vs. SCE), has a linear response in the 5.0 μM to 2.6 mM nitrate concentration range, and a detection limit as low as 0.5 μM (at an S/N ratio of 3).
Graphical abstract Schematic presentation of the synthesis of graphene hollow microspheres encapsulated with of gold nanoparticles (AuNP/rGO HMS) through a spray drying technique. The material was applied to the electrochemical determination of nitrite.
