烯丙基溴化钐与羰基化合物反应合成高烯丙基醇

高烯丙基醇是有机合成中的一类非常重要的中间体,以烯丙基金属试剂与羰基化合物加成反应为其主要合成方法,常用的金属烯丙基化合物有烯丙基锂(镁、锌、硼、铟、硅、锡、钛)等.由于烯丙基的Grignard试剂制备过程中常伴随着大量的烯丙基偶联反应,所以用烯丙基的Grignard试剂来合.     

简单亚胺的高效烯丙基化反应研究

首次实现了In(OTf)3催化下二丁基二烯丙基锡对活性较低的简单亚胺的高效烯丙基化加成. 烯丙基锡试剂和亚胺底物在10 mol%的In(OTf)3催化下, 无需添加其它辅助试剂, 二氯甲烷中室温搅拌10 h, 就可以得到收率为80%～99%的高烯丙基胺产物. 用四烯丙基锡替换该体系中的二丁基二烯丙基锡, 50 mol%用量即能得到很好的结果. 同时还对反应的机理进行了探讨.     

铜催化芳基(或烷基)卤化物选择性烯丙基化反应研究

以溴代芳烃和烯丙基乙酸酯为反应原料,发展了一种铜催化高效构建碳碳键的交叉偶联方法.该方法通过“一锅法”策略,有效避免了预制金属有机试剂的使用,在较温和条件下即可实现烯丙基类化合物的高区域选择性制备.     

烯丙基碘和锡与醛的选择加成反应

含活性基团的醛可与烯丙碘和锡粉直接进行亲核加成反应，得到高烯丙基的醇，水的存在不利于此反应的进行，与烯丙基溴相比，烯丙基碘反应活性更强，可在短时间内得较高的产率。     

烯丙基卤和锡与醛, 酮反应合成高烯丙基醇

烯丙基溴或烯丙基碘和锡能以较高的产率与含有羟基、酚羟基、硝基、溴等活性基团的羰基化合物作用合成相应的高烯丙基醇, 文中讨论了不同卤素以及溶剂性质、水的含量对反应的影响。     

C＝N双键的不对称烯丙基化反应

详细地综述了有关C＝N双键立体选择性烯丙基化反应的研究进展. 重点讲述了使用手性辅助基团、手性试剂以及不对称催化剂进行C＝N双键不对称烯丙基化的方法.     

过渡金属与光氧化还原协同催化的烯丙基取代反应的研究进展

过渡金属催化的烯丙基取代反应是一类重要且实用的有机化学反应, 可以立体选择性地高效构建碳-碳键和碳-杂键. 可见光氧化还原催化可以利用绿色清洁的可见光能源在较为温和的条件下产生自由基或者自由基离子等高反应活性的反应中间体, 被广泛地应用于有机合成中, 逐渐发展成为一种重要的合成工具. 鉴于烯丙基取代反应的重要性, 过渡金属与光氧化还原协同催化的烯丙基取代反应逐渐引起化学家的兴趣. 该协同催化的策略可以实现单一过渡金属催化难以实现的烯丙基取代反应, 反应的区域选择性和立体选择性也体现出不同的特点, 有望发展成为单一金属催化的烯丙基取代反应的重要补充. 本文综述了近年来不同过渡金属与可见光氧化还原协同催化的烯丙基取代反应的研究进展.     

羰基化合物电化学烯丙基化电极过程的研究

在甲醇中,通过电还原循环二烯丙基锡试剂,使2-降冰片烷基甲醛和癸醛电化学烯丙基化,得到相应醇的产率分别为81％和86％。用电化学测试技术,确定了二溴烯丙基甲氧基锡的还原电势、还原过程的不可逆性以及扩散系数、阴极传递系数和交换电流密度等电化学参数。根据实验事实,提出了可能的反应机理。     

金属参与的水相烯丙基化反应*

近30年来,水介质中碳-碳键的形成一直是研究的热点,其优越性也逐渐被人们所认知。在已发现的水相金属有机反应中,水相烯丙基化反应是研究得较多和较深入的反应之一。水相烯丙基化反应由于其发展速度较快,新的金属及金属体系参与的烯丙基化反应以及水相烯丙基化反应的机理研究不断被报道。本文综述了水相中金属参与烯丙基化反应的最新研究进展,并对新的反应机理作了简要的阐述。     

烯丙基溴与锡和醛的选择性加成反应

Yamamoto等曾报道烯丙基型的锡有机化合物可与羰基化合物进行亲核加成反应,得到高烯丙基型的醇.他们还发现此反应具有立体选择性.此后又发现这个反应可以被溶剂中的微量水所催化,使反应加速进行.这些结果促使我们进一步探讨当醛分子中含有羟基、酚基、硝基、卤素等各种不同的反应活性基团时,与烯丙基锡进行的反应.希望找到一种用传统的Grignard试剂无法直接进行的烯丙基化反应. 我们选择了间和邻羟基苯甲醛、间和对硝基苯甲醛、对溴苯甲醛、7-羟基-3,7-二甲基辛醛等化合物作反应底物,在金属锡粉存在下使羰基化合物与烯丙基溴反应.结果都得到了相应的高烯丙基醇.     

On the use of mixtures of organotin species for catalytic enantioselective ketone allylation--a detective story

In the presence of enantiopure MTBH(2)(monothiobinaphthol, 2-hydroxy-2[prime or minute]mercapto-1,1[prime or minute]-binaphthyl; 0.2 eq.) quantitative allylation of ArC([double bond]O)Me takes place with impure Sn(CH(2)CH[double bond]CH(2))(4)(prepared from allyl chloride, air-oxidised magnesium and SnCl(4)) to yield tert-homoallylic alcohols in 85-92% ee. In the same process highly purified, or commercial, Sn(CH(2)CH[double bond]CH(2))(4) yields material of only 35-50% ee. The origin of these effects is the presence of small amounts of the compounds, EtSn(CH(2)CH[double bond]CH(2))(3), ClSn(CH(2)CH[double bond]CH(2))(3) ClSnEt(CH(2)CH[double bond]CH(2))(2) in the tetraallyltin sample and the presence of traces of water (which inhibits achiral background reactions). All the triallyl and diallyl species enhance the stereoselectivity in the catalytic allylation reaction, the chlorides more so than the ethyl compound. Hydrolysis of ClSnEt(CH(2)CH[double bond]CH(2))(2) affords crystallographically characterised Sn(4)(mu(3)-O)(mu(2)-Cl)(2)Cl(2)Et(4)(CH(2)CH[double bond]CH(2))(4). Reaction of this latter compound with MTBH(2) leads to the most potent catalyst.     

Fe(CO)4 and related compounds as isolobal fragments

The M(CO)(4) fragment can be assigned to be isolobal with both CH(3)(+) and CH(2). In order to investigate this ambiguous isolobal assignment, we report calculations on compounds of the type M(CO)(4)L(n), where M is Fe (n = 0), Mn (n = -1), and Co (n = +1) and L is an η(2) ligand with a π bond, generally an alkene. The L's are varied in electron-withdrawing ability, and patterns in computed structural parameters are investigated. We report that the equatorial OC-M-CO angle is sensitive to the electron-withdrawing ability of the alkene just as the isolobal prediction suggests. Other structural parameters that vary monotonically with electron-withdrawing ability of the alkene are the "bending back" of the alkene, the metal-ligand bond distances, and carbon-oxygen bond distances. Changing the metal from neutral Fe to a negatively charged Mn or positively charged Co has the result of increasing and decreasing, respectively, the OC-M-CO angle. Several compounds of Ni(CO)(3)L are also investigated as a further example of the ability of the isolobal concept to yield chemically useful information.     

二(芳砜基)甲烷作极性逆转试剂:醛的一个简便合成法

二(芳砜基)甲烷的亚甲基被两个砜基活化,它的酸性大于硫代缩醛.使用较弱的碱性试剂即可使它形成相应的α-碳阴离子,发生烃化反应,继而还原,水解,从而提供醛的简便合成方法.     

Isolation and structure of [HC[CH(SiMe(3))(SnMe(3))](2)](+): a remarkably stable sec-alkyl cation

The reaction of the tin-substituted propene Me3Sn(R)CHCH=CHR (R = SiMe3) with MCl4 in dichloromethane in the presence of Me3SnCl gives the first examples of isolable sec-alkyl carbocation salts, [HC{CH(R)SnMe3}2]+M2Cl9- (M = Zr, Hf). The compounds are thermally stable and, unlike previously isolated trialkyl carbocations, do not require superacidic media or weakly coordinating anions for stability. The crystal structure and DFT calculations suggest polarization of the Sn substituents and hyperconjugation as the reason for the unexpected stability. The stabilizing effect of tin is significantly stronger than that of Si. The carbocations are effective initiators for the polymerization of isobutene, isoprene, and alpha-methylstyrene.     

Electronic structure and conformation properties of halogen-substituted acetyl acrylic anhydrides, CX3C(O)OC(O)CH═CH2 (X = H, F, or Cl)

Acetyl acrylic anhydride (CH(3)C(O)OC(O)CHCH(2)) and its halogen-substituted derivatives (CF(3)C(O)OC(O)CHCH(2) and CCl(3)C(O)OC(O)CHCH(2)) were prepared by the heterogeneous reaction of gaseous CH(2)═CHC(O)Cl with CX(3)C(O)OAg (X = H, F, or Cl). The molecular conformations and electronic structure of these three compounds were investigated by HeI photoelectron spectroscopy, photoionization mass spectroscopy, FT-IR, and theoretical calculations. They were theoretically predicted to prefer the [ss-c] conformation, with each C═O bond syn with respect to the opposite O-C bond and the C═C bond in cis orientation to the adjacent C═O bond. The experimental first vertical ionization potential for CH(3)C(O)OC(O)CHCH(2), CF(3)C(O)OC(O)CHCH(2), and CCl(3)C(O)OC(O)CHCH(2) was determined to be 10.91, 11.42, and 11.07 eV, respectively. In this study, the rule of the conformation properties of anhydride XC(O)OC(O)Y was improved by analyzing the different conformations of anhydrides with various substitutes.     

含有烯丙基亚胺酚配体的ⅣB族烯烃聚合催化剂以及制备双峰分布聚乙烯(英)

选择含有烯丙基亚胺酚为辅助配体，设计合成了5个ⅣB族钛锆金属络合物[{CH₂=CHCH₂N=CH-C₆H₃(3-R)O}₂MCl₂](4a：R=t-Bu，M=Zr；4b：R=t-Bu，M=Ti；4c：R=Ph，M=Zr；4d：R=Ph，M=Ti)和[{(CH₃)₂CHCH₂N=CH-C₆H₃(3-t-Bu)O}₂ZrCl₂] (5)，对它们进行了红外光谱、核磁共振及元素分析表征。并用X-射线单晶衍射法测定了化合物4a和4d的晶体结构。部分配合物在助催化剂MMAO的作用下对烯烃聚合显示了较好的催化活性，其中自固载催化剂4a生成了双峰分布的聚烯烃产品 (M_w/M_n=15.3～31.9)。     

New iridacyclohexadienes and iridabenzenes by [2+2+1] cyclotrimerization of alkynes and facile interconversion between iridacyclohexadienes and iridabenzenes

Iridabenzenes [Ir[=CHCH=CHCH=C(CH2R)](CH3CN)2(PPh3)2]2+ (R=Ph 4 a, R=p-C6H4CH3 4 b) are obtained from the reactions of H+ with iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](CO)(PPh3)2]+ (R'=H 3 a, R'=CH3 3 b), which are prepared from [2+2+1] cyclotrimerization of alkynes in the reactions of [Ir(CH3CN)(CO)(PPh3)2]+ with HC[triple chemical bond]CH and HC[triple chemical bond]CR. Iridabenzenes 4 react with CO and CH3CN in the presence of NEt3 to give iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CHR)](CO)2(PPh3)2]+ (6) and [Ir[-CH=CHCH=CHC(=CHR)](CH3CN)2(PPh3)2]+ (7), respectively. Iridacyclohexadienes 6 and 7 also convert to iridabenzenes 4 by the reactions with H+ in the presence of CH3CN. Alkynyl iridacyclohexadienes [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-C[triple chemical bond]CH)(PPh3)2] (8) undergo a cleavage of C[triple chemical bond]C bond by H+/H2O to produce [Ir[-CH=CHCH=CHC(=CH-p-C6H4R')](-CH3)(CO)(PPh3)2] (10) via facile inter-conversion between iridacyclohexadienes and iridabenzenes.     

Assembly of azido- or cyano-bridged binuclear complexes containing the bulky [Mn(phen)2]2+ building block: syntheses, crystal structures, and magnetic properties

Two new cyano-bridged heterobinuclear complexes, [Mn(II)(phen)2Cl][Fe(III)(bpb)(CN)2] x 0.5CH3CH2OH x 1.5H2O (1) and [Mn(II)(phen)2Cl][Cr(III)(bpb)(CN)2] x 2H2O (2) [phen = 1,10-phenanthroline; bpb(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate], and four novel azido-bridged Mn(II) dimeric complexes, [Mn2(phen)4(mu(1,1)-N3)2][M(III)(bpb)(CN)2]2 x H2O [M = Fe (3), Cr (4), Co (5)] and [Mn2(phen)4(mu(1,3)-N3)(N3)2]BPh4 x 0.5H2O (6), have been synthesized and characterized by single-crystal X-ray diffraction analysis and magnetic studies. Complexes 1 and 2 comprise [Mn(phen)2Cl]+ and [M(bpb)(CN)2]- units connected by one cyano ligand of [M(bpb)(CN)2]-. Complexes 3-5 are doubly end-on (EO) azido-bridged Mn(II) binuclear complexes with two [M(bpb)(CN)2]- molecules acting as charge-compensating anions. However, the Mn(II) ions in complex 6 are linked by a single end-to-end (EE) azido bridging ligand with one large free BPh4(-) group as the charge-balancing anion. The magnetic coupling between Mn(II) and Fe(III) or Cr(III) in complexes 1 and 2 was found to be antiferromagnetic with J(MnFe) = -2.68(3) cm(-1) and J(MnCr) = -4.55(1) cm(-1) on the basis of the Hamiltonian H = -JS(Mn)S(M) (M = Fe or Cr). The magnetic interactions between two Mn(II) ions in 3-5 are ferromagnetic in nature with the magnetic coupling constants of 1.15(3), 1.05(2), and 1.27(2) cm(-1) (H = -JS(Mn1)S(Mn2)), respectively. The single EE azido-bridged dimeric complex 6 manifests antiferromagnetic interaction with J = -2.29(4) cm(-1) (H = -JS(Mn1)S(Mn2)). Magneto-structural correlationship on the EO azido-bridged Mn(II) dimers has been investigated.     

二氧化碳促进的醛和酮等羰基化合物烯丙基化反应研究

加入二氧化碳可以促进羰基化合物的烯丙基化反应. 实验结果表明: 在1.0 MPa的二氧化碳和2 equiv.的锡存在下, 以THF/H₂O为反应介质, 芳香醛化合物与烯丙基溴可以顺利地发生烯丙基化反应得到较高的产率, 而芳香酮化合物和脂肪醛等与烯丙基溴反应只得到较低的产率.     

Methyl and silyl mesolytic dissociations in the radical cations and radical anions of but-1-ene,allylsilane, hexa-1,3-diene,and penta-2,4-dienylsilane. CAS-MCSCF and coupled cluster theoretical study

Methyl or silyl dissociation in the CH(2)=CHCH(2)-XH(3) (a-XH(3)(*)(+)) and CH(2)=CHCH=CHCH(2)-XH(3) (p-XH(3)(*) (+)) radical cations (X = C, Si) yields a(+) or p(+) and XH(3)(*). Similarly, the radical anions a-CH(3)(*) (-) and p-CH(3)(*) (-) give the pi-delocalized anion and CH(3)(*) preferentially. In contrast, a-SiH(3)(*) (-) and p-SiH(3)(*-) prefer to dissociate into the pi-delocalized radical and silide. All reactions are endoergic: by 43-50 kcal mol(-)(1) in the radical cations, and easier to some extent in the radical anions, that require 29-33 (X = C) and 13-14 kcal mol(-)(1) (X = Si). The fragmentation energy profiles do not present significant barriers for the backward process in the case of the radical cations. All radical anions exhibit an energy maximum along the dissociation pathway, but the barrier is lower than the dissociation limit. Fragmentation is "activated" more in the anions than in the cations with respect to homolysis in the corresponding neutrals (that requires 72-81 kcal mol(-)(1)). Wave function analysis indicates that the C-X bond cleavage in the hydrocarbon radical ions, although formally comparable to a homolytic process, is at variance with this model, due to the spin recoupling of one of the two C-X bond electrons with the originally unpaired electron. This is basically true also for the silyl-substituted radical anions, in which the initial more delocalized charge distribution might suggest some heterolytic character of the bond cleavage.