Light-induced charge separation in anatase TiO2 particles

Ultraviolet light-induced electron-hole pair excitations in anatase TiO(2) powders were studied by a combination of electron paramagnetic resonance and infrared spectroscopy measurements. During continuous UV irradiation in the mW.cm(-2) range, photogenerated electrons are either trapped at localized sites, giving paramagnetic Ti(3+) centers, or remain in the conduction band as EPR silent species which may be observed by their IR absorption. Using low temperatures (90 K) to reduce the rate of the electron-hole recombination processes, trapped electrons and conduction band electrons exhibit lifetimes of hours. The EPR-detected holes produced by photoexcitation are O(-) species, produced from lattice O(2-) ions. It is found that under high vacuum conditions, the major fraction of photoexcited electrons remains in the conduction band. At 298 K, all stable hole and electron states are lost from TiO(2). Defect sites produced by oxygen removal during annealing of anatase TiO(2) are found to produce a Ti(3+) EPR spectrum identical to that of trapped electrons, which originate from photoexcitation of oxidized TiO(2). Efficient electron scavenging by adsorbed O(2) at 140 K is found to produce two long-lived O(2)(-) surface species associated with different cation surface sites. Reduced TiO(2), produced by annealing in vacuum, has been shown to be less efficient in hole trapping than oxidized TiO(2).     

Recombination pathways in the Degussa P25 formulation of TiO2: surface versus lattice mechanisms

Charge migration between electron trapping sites within the mixed-phase titania photocatalyst Degussa P25 has been studied. In addition to previously described lattice electron trapping sites on both anatase and rutile phases, surface electron trapping sites and an anatase-rutile interface trapping site specific to Degussa P25 are identified. The relationship between these sites and recombination with surface hole trapping sites is also determined. It is experimentally shown that upon band-gap illumination holes appear at the surface and preferentially recombine with electrons in surface trapping sites. These findings indicate that in mixed-phase TiO2, such as Degussa P25, photogenerated holes are trapped exclusively on the particle surface, while photogenerated electrons are trapped within the nanoparticle lattice. Recombination reactions are dominated by surface reactions that follow charge migration. These findings indicate that, in mixed-phase TiO(2), such as Degussa P25, a random flight mechanism of recombination predominates. Such knowledge simplifies the mechanistic mathematical models used for process design and points the way for improving future oxidative titania catalysts.     

Low temperature kinetics and energetics of the electron and hole traps in irradiated TiO2 nanoparticles as revealed by EPR spectroscopy

We have monitored exclusively the dynamics of photogenerated charge carriers trapping in deep traps and trapped electron-hole recombination in UV irradiated anatase TiO2 powders by electron paramagnetic resonance (EPR) spectroscopy at 10 K. The results reveal that the strategy of using low temperatures contributes to the stabilization of the charged pair states for hours by reducing the rate of electron-hole recombination processes. Since only the localized states such as holes trapped at oxygen anions and electrons trapped at coordinatively unsaturated cations are accessible to EPR spectroscopy, the time-dependent population and depopulation of these EPR signals reflect the kinetics and energetics of these trap states. The data support a model of sequential accumulation of deep trap site populations in which the initial fast direct trapping into a deep trap site is followed by slower carrier trap-to-trap hopping until a deep trap is encountered for both photogenerated electrons and holes. Effective modeling of the subsequent decay of trapped-holes is achieved by employing a first-order kinetics, whereas the decay of either surface- or inner-trapped electrons has both a fast and a slow component. The fast component is attributed to a trapped-electron and a free-hole recombination, and the slow component is attributed to trapped electron-hole recombination. The activation energies for the process of diffusion of trapped electrons from their Ti3+ trapping sites are estimated.     

Gold nanoparticles located at the interface of anatase/rutile TiO2 particles as active plasmonic photocatalysts for aerobic oxidation

Visible-light irradiation (λ > 450 nm) of gold nanoparticles loaded on a mixture of anatase/rutile TiO(2) particles (Degussa, P25) promotes efficient aerobic oxidation at room temperature. The photocatalytic activity critically depends on the catalyst architecture: Au particles with <5 nm diameter located at the interface of anatase/rutile TiO(2) particles behave as the active sites for reaction. This photocatalysis is promoted via plasmon activation of the Au particles by visible light followed by consecutive electron transfer in the Au/rutile/anatase contact site. The activated Au particles transfer their conduction electrons to rutile and then to adjacent anatase TiO(2). This catalyzes the oxidation of substrates by the positively charged Au particles along with reduction of O(2) by the conduction band electrons on the surface of anatase TiO(2). This plasmonic photocatalysis is successfully promoted by sunlight exposure and enables efficient and selective aerobic oxidation of alcohols at ambient temperature.     

A Blinking Mesoporous TiO2−x Composed of Nanosized Anatase with Unusually Long-Lived Trapped Charge Carriers

A mesoporous TiO_2−x material comprised of small, crystalline, vacancy-rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer-derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO_2−x. When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red-shift in their UV/Vis absorption and long-lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO₂ reduction.     

A bioinspired construct that mimics the proton coupled electron transfer between P680*+ and the Tyr(Z)-His190 pair of photosystem II

A bioinspired hybrid system, composed of colloidal TiO2 nanoparticles surface modified with a photochemically active mimic of the PSII chlorophyll-Tyr-His complex, undergoes photoinduced stepwise electron transfer coupled to proton motion at the phenolic site. Low temperature electron paramagnetic resonance studies reveal that injected electrons are localized on TiO2 nanoparticles following photoexcitation. At 80 K, 95% of the resulting holes are localized on the phenol moiety and 5% are localized on the porphyrin. At 4.2 K, 52% of the holes remain trapped on the porphyrin. The anisotropic coupling tensors of the phenoxyl radical are resolved in the photoinduced D-band EPR spectra and are in good agreement with previously reported g-tensors of tyrosine radicals in photosystem II. The observed temperature dependence of the charge shift is attributed to restricted nuclear motion at low temperature and is reminiscent of the observation of a trapped high-energy state in the natural system. Electrochemical studies show that the phenoxyl/phenol couple of the model system is chemically reversible and thermodynamically capable of water oxidation.     

A Blinking Mesoporous TiO2−x Composed of Nanosized Anatase with Unusually Long‐Lived Trapped Charge Carriers

A mesoporous TiO_2?x material comprised of small, crystalline, vacancy‐rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer‐derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO_2?x. When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red‐shift in their UV/Vis absorption and long‐lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO₂ reduction.     

The different behavior of rutile and anatase nanoparticles in forming oxy radicals upon illumination with visible light: an EPR study

Photoexcited TiO(2) has been found to generate reactive oxygen species, yet the precise mechanism and chemical nature of the generated oxy species especially regarding the different crystal phases remain to be elucidated. Visible light-induced reactions of a suspension of titanium dioxide (TiO(2)) in water were investigated using electron paramagnetic resonance (EPR) coupled with the spin-trapping technique. Increased levels of both hydroxyl (˙OH) and superoxide anion (˙O(2)(-)) radicals were detected in TiO(2) rutile and anatase nanoparticles (50 nm). The intensity of signals assigned to the ˙OH and ˙O(2)(-) radicals was larger for the anatase phase than that originating from rutile. Moreover, illumination with visible (nonUV) light enhanced ˙O(2)(-) formation in the rutile phase. Singlet oxygen was not detected in water suspension of TiO(2) neither in rutile nor in anatase nanoparticles, but irradiation of the rutile phase with visible light revealed a signal, which could be attributed to singlet oxygen formation. The blue part of visible spectrum (400-500 nm) was found to be responsible for the light-induced ROS in TiO(2) nanoparticles. The characterization of the mechanism of visible light-induced oxy radicals formation by TiO(2) nanoparticles could contribute to its use as a sterilization agent.     

微乳法合成纳米SiO2/TiO2及其光催化性能

采用聚乙二醇辛基苯基醚(Triton X-100)/正己醇/环己烷/氨水微乳体系合成了纳米TiO2和SiO2/TiO2复合物,用X射线衍射、红外光谱和透射电镜对其结构进行了表征,并以甲基橙降解评价了其光催化性能,讨论了SiO2/TiO2摩尔比、晶相组成及粒径与光催化活性的关系.结果表明,SiO2/TiO2催化剂中形成了新的Ti-O-Si键和无定形SiO2;在纳米TiO2中复合SiO2能有效抑制锐钛矿向金红石的转变,增加锐钛矿的稳定性,并阻止TiO2晶粒的聚集生长.催化剂的光催化活性随金红石含量的增加而降低,加入适量SiO2能明显提高TiO2的光催化活性,其中摩尔比为1/7的SiO2/TiO2光催化活性最高.     

表面相结结构在促进光催化电荷分离中的应用

二十世纪八十年代以来,特别是近十年,光催化研究在利用可再生能源太阳能的道路上飞速发展。越来越多的研究表明,相结结构的构筑是有效提高半导体光催化剂性能的重要策略。其中, TiO2作为重要的模型光催化剂,其相关研究成果呈现出指数增长的趋势。本综述围绕TiO2模型光催化剂,主要介绍TiO2表面相结的研究成果,包括TiO2表面相的表征、锐钛矿：金红石TiO2相结用于光催化产氢研究、TiO2相结在光催化中作用的最新认识等。在表征方面,通过表面灵敏的紫外拉曼光谱研究了TiO2相变过程中表面相结构的变化,结合可见拉曼以及XRD表征揭示了TiO2独特的相变过程,即相变始于锐钛矿粒子的界面处,小粒子逐渐团聚为大粒子,致其相变从大粒子体相开始最终扩展到整个粒子。使用CO, CO2探针红外光谱,根据锐钛矿和金红石表面吸附物种的差异,进一步证实了锐钛矿：金红石表面相结结构,为紫外拉曼光谱的表面表征特性提供坚实证据。同时,利用发光光谱观察到锐钛矿晶相的可见发光带和金红石晶相的近红外发光带,并基于此给出了TiO2材料表面相结结构的荧光表征新方法。此外荧光光谱还提供了锐钛矿、金红石相中载流子动力学信息,揭示了束缚态在光催化中的作用。在光催化应用方面,观察到混相结构TiO2较单独锐钛矿及金红石相具有更高的光催化产氢活性,通过在较大金红石颗粒上担载纳米锐钛矿粒子,证明了相结结构在提高光催化活性中的核心作用,并首次提出了锐钛矿：金红石表面异相结结构概念,推断其对电荷分离的促进作用是最终提高反应活性的原因。之后将此概念应用到改善商品TiO2(P25)光催化活性中,通过可控热处理精细调控P25的表面相结构,在光催化重整生物质衍生物产氢实验中,成功将P25光催化产氢活性提高3?5倍。之后发展了新的TiO2表面控制方法,通过加入Na2SO4等相变控制剂,延缓了TiO2从锐钛矿向金红石的相变过程,在较高温度下实现TiO2相结结构的调控,最终可将P25光催化重整甲醇制氢的活性提高6倍,同时通过高分辨电镜清晰观察到锐钛矿：金红石相结的原子层生长接触。在相结作用机理方面,多种时间分辨光谱技术以及理论计算被用作探索锐钛矿：金红石相结处的电子转移机理。通过时间分辨红外光谱对TiO2表面相结结构作用的研究,特别是利用锐钛矿、金红石不同的瞬态吸收光谱特征,证明了锐钛矿：金红石相结处的载流子转移过程,存在锐钛矿向金红石的电子转移过程。模型光催化剂TiO2相结的研究成果,加深了对光催化机理的认识,促进新型高效光催化体系的设计合成。     

Synthesis and characterization of nano titania powder with high photoactivity for gas-phase photo-oxidation of benzene from TiOCl(2) aqueous solution at low temperatures

Nano rutile, anatase, and bicrystalline (anatase + brookite) titania powders with an average crystal size of below 10 nm are prepared from aqueous TiOCl(2) solution at low temperatures by adjusting pH values of the starting solution and adding different additives. Adding a small amount of octyl phenol poly(ethylene oxide) into aqueous TiOCl(2) solution leads to the change of particle morphologies of obtained nano titania from needlelike to nano spherical rutile crystals. Amorphous-anatase transformation of titania could proceed in liquid-solid reaction at low temperatures, even at room temperature. A formation mechanism of rutile, anatase, and brookite titania was proposed. It is found that H(+) or H(3)O(+) plays a catalytic role in the phase transformation from amorphous to anatase titania and that the presence of a small amount of SO(4)(2)(-) ion is unfavorable to the formation of both rutile and brookite. By carefully adjusting preparation conditions, nano pure anatase with higher surface area, good crystallinity, and a lower recombination rate of photoexcited electrons and holes was obtained. This nano pure anatase showed a very good photocatalytic activity for gas-phase photo-oxidation of benzene.     

二氧化钛纳米微粒的制备与光催化活性

本文采用溶液－凝胶法制备了粒径为１０－２０ｎｍ左右的二氧化钛纳米微粒。用ＸＲＤ研究了二氧化钛溶胶的热处理过程,研究表明温度在４７３Ｋ－６７３Ｋ左右ＴｉＯ２向量 粒呈不规整锐钛矿结构,粒径约为１０－２０ｎｍ。在８７３Ｋ左右ＴｉＯ２微粒出现锐钛矿与金红石型混晶结构。     

Cu2+/TiO2对甲基橙的光催化降解机理

以自制的掺铜离子的混晶型二氧化钛为光催化剂,考察了甲基橙光催化降解过程中pH值和光源的影响,提出了两种不同的光催化降解机理:在高压汞灯照射下,TiO2的价带电子被激发到导带,光生电子和空穴主要通过Cu2+ 的短路循环而复合,光催化剂的活性降低;在太阳光照射下,甲基橙发生自身光敏化氧化反应,受激电子从单线态或三线态的甲基橙分子跃迁到TiO2的导带,Cu2+起到电荷传递中继站的作用,加速了注入电子向H2O2的转移,从而促进了甲基橙的光催化降解。     

Excitonic recombination in superstoichiometric nanocrystalline TiO2 grown by cluster precursors at room temperature

Unprecedented room temperature excitonic emissions are achieved from TiO(2) nanocrystals synthesized at 300 K by supersonic cluster beams. Transmission electron microscopy studies show the crystalline nature of the nanoparticles (NPs) with a diameter ranging from 5 to 30 nm. All the samples show mixed rutile and anatase phases as confirmed by Raman spectroscopy. XPS core level analyses evidence an O/Ti ratio of the as-grown nanoparticles of 2.30 ± 0.04. Two room temperature cathodoluminescence excitonic peaks observed at 3.16 and 3.25 eV are ascribed to the coexistence of rutile and anatase crystallographic phases respectively. Subsequent thermal treatments at 450 °C cause the complete quenching of the UV excitonic emissions and result in a more conventional broad visible band centered at 2.5 eV. HRTEM and XPS studies reveal that, after annealing, the NPs remain single crystals in nature with an O/Ti ratio of 2.20 ± 0.04. These results suggest a correlation between the emission properties and the oxygen concentration of our NPs. The achieved ability to tune the optical properties of TiO(2) nanoparticles is very promising for sensing and energy applications.     

C–Cl共掺杂TiO2/凹凸棒复合催化剂的制备及其可见光催化性能

TiO2光催化剂具有无毒、物理化学性质稳定及光催化活性较高等优点,因而在能源及环境净化等领域备受关注.但是,TiO2纳米颗粒作为催化剂仍存在以下不足:(1)TiO2带隙较宽,只能吸收利用太阳光能的紫外光部分,而照射到地球表面的太阳光大部分为可见光;(2)光生载流子(电子/空穴)的复合使得光催化活性不高;(3)纳米催化剂的回收利用困难;(4)单独使用TiO2,成本较高;(5)针对低浓度有机污染,常见TiO2催化剂比表面积较小,吸附富集能力较差,导致光催化降解效率较低.TiO2自身这些缺陷大大限制了其进一步的实际应用.针对上述这些问题,我们在本研究中设计了一种简便易行的溶胶凝胶法,在较低的温度(70℃)下合成了非金属C–Cl共掺杂的TiO2/凹凸棒(TiO2/ATT)复合催化剂.XRD及HRTEM分析证明,通过调节反应溶液的pH可以分别合成含锐钛矿/金红石、锐钛矿/金红石/板钛矿的两相和三相的混合相TiO2,且锐钛矿/金红石比例可以通过改变pH而进行调节.XPS分析证明,C和Cl同时成功掺进TiO2/ATT复合催化剂.UV-Vis漫反射结果显示,非金属C和Cl的掺杂使得所合成复合催化剂的光吸收性能明显拓展到可见光区,因而可以充分利用可见光能进行有机污染物催化降解,而ATT作为TiO2的载体,减少了TiO2使用量,改善了TiO2的表面特性和孔结构,且有利于光催化剂的回收利用.以酸性红G为目标有机污染物,在可见光照射下对复合催化剂的可见光催化活性进行了测试.结果表明,当合成反应体系的pH值为3.0时,所获得的锐钛矿/金红石/板钛矿三相TiO2/ATT复合催化剂具有良好的可见光吸收特性,其可见光催化活性远远高于市售P25型TiO2,对难降解的酸性红溶液G具有优异的脱色效果和良好的TOC去除性能.循环光催化实验和FTIR表征结果表明,在5次循环利用后,TiO2/ATT复合催化剂仍表现出很高的催化活性,表明其稳定性优异.荧光分析和自由基捕获实验表明,光催化降解反应中的主要活性物种是羟基自由基、空穴和超氧自由基.TiO2/ATT复合催化剂高效稳定的可见光催化性能主要归因于:(1)非金属C和Cl的共掺杂改善了其可见光吸收性能;(2)催化剂中的TiO2由金红石、锐钛矿和板钛矿混合相组成,有利于抑制光生载流子的复合;(3)多孔结构的ATT作为载体提高了TiO2的比表面积,增加了反应活性位,同时改善了孔结构,从而有利于模拟有机污染物(酸性红G)分子的吸附和降解,有利于反应产物扩散,从而提高了催化剂的可见光催化效率.     

A simple route for the preparation of Eu, N-codoped TiO2 nanoparticles with enhanced visible light-induced photocatalytic activity

A simple route has been developed for the synthesis of europium, nitrogen-codoped titania photocatalysts under mild conditions (i.e., low temperature, < or = 348 K, and ambient pressure). The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance spectra (DRS) analyses. The results showed that the codoped photocatalyst with a spheroidal shape exhibited a smaller size than the undoped titania. The transformation from anatase to rutile was suppressed by doping with Eu and N atoms. Furthermore, the absorbance spectra of Eu, N-codoped TiO(2) exhibited a significant red shift to the visible region. The photocatalytic activity of Eu, N-codoped TiO(2) was evaluated by photodegradation of the dye reactive brilliant red X-3B under visible light. This codoped sample exhibited enhanced photocatalytic activity compared to N-doped TiO(2), pure TiO(2), and P25.     

The role of crystal phase in determining photocatalytic activity of nitrogen doped TiO2

Two series of nitrogen doped TiO(2) samples with different ratios of anatase to rutile phases were prepared by milling the mixture of P25 TiO(2) and C(6)H(12)N(4) in air and gaseous NH(3) atmosphere, respectively. Compared to air, NH(3) atmosphere plays an important role in delaying the crystallite transformation from anatase to rutile in the mechanochemical reaction of TiO(2) and C(6)H(12)N(4). In contrast to the previously reported results for pure TiO(2), it is found that nitrogen doped TiO(2) with higher content of rutile phase demonstrates higher photocatalytic activity in photodegrading pollutant Rhodamine B under both UV light and visible light irradiation (lambda>420 nm), and the amount of the surface-adsorbed water and hydroxyl groups on nitrogen doped TiO(2) have little correlations with their crystallite phases (anatase or rutile) and photocatalytic activity. The more abundant surface states characterized by photoluminescence spectroscopy together with the lowered valence band maximum of rutile TiO(2) by nitrogen doping are considered as the key factors for the higher activity of nitrogen doped TiO(2) with higher content of rutile phase.     

含 TiO2(B) 介孔氧化钛材料的制备、特性和应用

 综述了近年来本课题组依据材料化学工程研究思想, 对含 TiO2(B)(一种比金红石和锐钛矿相结构更松散的氧化钛晶型) 介孔氧化钛材料在制备、结构和性能方面所取得的研究进展. 该介孔材料由二钛酸钾经水合、离子交换和热处理得到, 具有良好原子尺度晶格匹配界面特征的锐钛矿和 TiO2(B) 核壳结构. 研究表明, 该介孔材料在兼备高比表面积、高晶化孔壁和高热稳定性的同时, 还表现出良好的纳米颗粒担载稳定性, 在光催化、油品加氢精制、药物载体、固体酸催化和电化学电容器等方面已凸显出良好的应用潜力和推广价值. 目前该新型含 TiO2(B) 介孔氧化钛材料已经实现低成本、规模化制备.     

物理混合法制备分级混晶TiO2微纳米材料及其光催化性能

通过物理混合法可控合成了分级混晶TiO₂微纳米材料, 采用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射仪(XRD)、 X射线光电子能谱仪(XPS)和固体紫外-可见分光光度计(UV-Vis)等对该微纳米材料进行了表征, 并评价了不同混晶比材料的光催化性能. 结果表明, 所得材料是由均匀负载金红石纳米颗粒的锐钛矿纳米片组装的三维分级结构. 其具有很高的光催化活性, 分级结构和混晶异相结的同时引入是提高材料光催化活性的关键.     

微乳法制备纳米TiO2 /SiO2的结构及光催化研究

Nanosized TiO₂ and TiO₂/SiO₂ particles were prepared by hydrolysis of tetrabutyl titanate (TBOT) and tetraethyl orthosilicate (TEOS) in the TX-100 reverse microemulsion. These particles were characterized by TG-DSC, XRD, FTIR, TEM，N₂ adsorption-desorption. Their photocatalytic activity was tested by degradation of methyl orange. The result shows that TiO₂/SiO₂ nanoparticles are with a monodispersed spherical phase and a uniform size distribution，and TiO₂ particles are dispersed on the surface of SiO₂. The band for Ti-O-Si vibration in FTIR was observed, the Ti-O-Si bond increased the stability of anatase TiO₂, suppressed the phase transformation of titania from anatase to rutile. And due to the addition of SiO₂, the average size of titania decreased from 38 nm in pure TiO₂ to 5 nm in TiO₂/SiO₂. It was found, under UV light irradiation, TiO₂/SiO₂ particles showed higher activity than pure TiO₂, and TiO₂/SiO₂(1/1) particles showed the highest photocatalytic activity on the photocatalytic decomposition of methyl orange, which was influenced by crystal structure, particle size, crystallinity and Surface area Characteristics.