纳米Ag@SiO_2核壳结构的表面等离子体共振效应对铕配合物的荧光增强作用(英文)

分别制备了二氧化硅壳层厚度为10、25和80 nm的三种Ag@S O2纳米粒子,合成了铕与不同比例苯甲酸根(BA)的配合物、铕与1,10-邻菲罗啉(phen)及2,2′-联吡啶(bpy)的配合物,并对其进行表征.表征结果推测配合物的组成为Eu(BA)nCl3-n·2H2O(n=1,2,3)、Eu(phen)Cl3·2H2O和Eu(bpy)Cl3·2H2O.配合物的荧光光谱显示,在加入Ag@Si O2纳米粒子后,复合物的荧光强度有不同程度的增加,这可能是由于表面等离子体共振造成的.不同硅壳厚度的Ag@Si O2纳米粒子的荧光增强顺序是25 nm80 nm10 nm,这表明二氧化硅核壳厚度约25 nm时有较强的表面等离子体共振效应.此外,在这些复合物中,Eu(phen)Cl3·2H2O复合物的增强效果是最强的,而Eu(BA)nCl3-n·2H2O的增强效果是最弱的.在三个苯甲酸铕配合物中,Eu(BA)3·2H2O的增强效果最弱,其他两个苯甲酸铕复合物增强效果相对较好.原因可能是含氮配合物(Eu(phen)Cl3·2H2O和Eu(bpy)Cl3·2H2O)可以和Ag@SiO2更好地成键,而苯甲酸铕配合物和Ag@Si O2纳米粒子的作用相对较弱.Ag@SiO2纳米粒子有望应用于增强稀土材料的发光.     

4,4'-联吡啶桥联的三个铜有机膦酸配合物的合成、结构及磁性

在水热条件下,以N-氧化-2-吡啶膦酸(H₂L)为主配体,4,4’-联吡啶(bpy)为桥联配体,合成了3个铜有机膦酸配合物：{[Cu(L)(bpy)_0.5(H₂O)]·2H₂O}_n(1),{[Cu(HL)₂(bpy)]·4H₂O}_n(2)和{[Cu₂(L)₂(bpy)]·3H₂O}_n(3)。配合物1中,相邻的铜离子由2个膦酸根连成二聚体,二聚体之间通过bpy桥联成一维链。配合物2中,单核[Cu(HL)₂]被bpy连接成一维链。配合物3中,四聚体[Cu₂(L)₂]₂被bpy连接成“砖块状”结构的二维层。磁性研究表明,配合物1和3中铜离子之间存在反铁磁性耦合。     

复合碳纳米管增强纳米Ag2CO3的可见光催化活性和稳定性

在二甲基甲酰胺溶液中, 通过简单的沉淀法制备了纳米Ag₂CO₃和碳纳米管(CNT)的复合物. 用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜(SEM)和紫外-可见(UV-Vis)漫反射光谱(DRS)表征了所制备的Ag₂CO₃/CNT复合物, 通过在可见光下降解甲基橙(MO)检测了样品的光催化活性. 结果表明, 纳米Ag₂CO₃颗粒与CNT结合良好. CNT的含量为1.5% (w)的Ag₂CO₃/1.5% CNT复合物活性最高, 经过60 min 的降解, 甲基橙的降解率达到93%. 与纯相纳米Ag₂CO₃比较, CNT的加入还提高了Ag₂CO₃的稳定性, 经过三次循环降解, Ag₂CO₃/1.5% CNT复合物还能降解81%的甲基橙, 而纳米Ag₂CO₃只能降解59.5%的甲基橙. 其活性和稳定性提高的原因是由于CNT的高导电性, 它不仅促进了电子-空穴对的分离, 还能快速转移产生的光生电子.     

4,4'-联吡啶桥联的三个铜有机膦酸配合物的合成、结构及磁性

在水热条件下,以N-氧化-2-吡啶膦酸（H2L）为主配体,4,4＇-联吡啶（bpy）为桥联配体,合成了3个铜有机膦酸配合物： {[CuL（bpy）0.5（H₂O）]·2H₂O}_n（1）, {[Cu（HL）₂（bpy）]·4H₂O}_n（2）和{[Cu₂（L）₂（bpy）]·3H₂O}_n（3）。配合物1中,相邻的铜离子由2个膦酸根连成二聚体,二聚体之间通过bpy桥联成一维链。配合物2中,单核[Cu（HL）₂]被bpy连接成一维链。配合物3中,四聚体[Cu₂（L）₂]₂被bpy连接成“砖块状”结构的二维层。磁性研究表明,配合物1和3中铜离子之间存在反铁磁性耦合。     

Ag@SiO2纳米颗粒的制备及其在H2O2检测上的应用

利用柠檬酸三钠还原硝酸银制备了银纳米颗粒(AgNPs), 然后通过氨水水解正硅酸乙酯(TEOS)的方法, 在AgNPs上沉积SiO₂, 制备出以Ag为核, SiO₂为壳的复合纳米颗粒(Ag@SiO₂). 调节TEOS用量, 可以控制SiO₂层的厚度. 根据AgNPs的局域表面等离激元共振(LSPR)效应, 将制得的Ag@SiO₂颗粒用于H₂O₂的检测, 检测下限为1 μmol/L, 并可以通过控制SiO₂层的厚度方便地调节Ag@SiO₂颗粒与H₂O₂反应的速率. 与传统方法相比, 具有简单、快速、成本低的优点. 分别运用TEM、紫外-可见分光光度计对反应前后Ag@SiO₂颗粒形貌及反应过程中其LSPR吸收的变化进行了表征.     

基于3，3′，4，4′-四羧基偶氮苯构筑的三个金属配合物的合成、晶体结构及性质

在水热条件下利用H₄ddb配体合成了3个过渡金属配合物[Co₂（ddb）（phen）₂（H₂O）₆]·3H₂O（1）,[Co（ddb）_0.5（bpy）_0.5（H₂O）₃]_n（2）和{[Ag（dpe）]·0.5（H₂ddb）·H₂O}_n（3）（H₄ddb=3,3'',4,4''-四羧基偶氮苯,bpy=4,4''-联吡啶,dpe=1,2-二（4-吡啶基乙烯））,并用元素分析、红外光谱、X射线粉末衍射、X射线单晶衍射对其进行了表征。配合物1为双核结构,基于丰富的氢键作用扩展形成三维超分子网结构。配合物2为基于钴离子通过ddb^4-配体以μ₄：η¹,η¹,η¹,η¹的配位模式连接而成的二维网结构。配合物3是由Ag（Ⅰ）离子与dpe配体形成的直链结构,客体分子H₂ddb^2-通过氢键作用将其扩展为三维超分子结构。此外还研究了配合物1~3的荧光性质和热稳定性。     

Bi2MoO6/BiVO4异质结的水热合成和可见光催化活性

采用一步水热法制备Bi₂MoO₆/BiVO₄复合光催化剂. 利用X 射线衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等手段对其晶体结构和微观结构进行了表征. 结果表明, Bi₂MoO₆纳米粒子沉积在BiVO₄纳米片表面从而形成异质结结构. 紫外-可见漫反射光谱(UV-Vis DRS)表明所制备的Bi₂MoO₆/BiVO₄异质结较纯相Bi₂MoO₆和BiVO₄对可见光吸收更强. 由于形成异质结结构及其光吸收性能使Bi₂MoO₆/BiVO₄ 光催化活性有较大提高. 可见光下(λ>420 nm)光催化降解罗丹明B (RhB)实验结果表明,Bi₂MoO₆/BiVO₄光催化活性较纯相Bi₂MoO₆和BiVO₄高. Bi₂MoO₆/BiVO₄样品光催化性能提高的原因是Bi₂MoO₆和BiVO₄形成异质结, 从而有效抑制光生电子-空穴对的复合, 增大了可见光吸收范围及比表面积.     

三元体系YCl3-CdCl2-H2O和四元体系YCl3-CdCl2-HCl(～8.8%)-H2O (25 ℃)的相平衡及其固相新化合物的研究

The equilibrium solubilities of the ternary system YCl₃-CdCl₂-H₂O, the quaternary system YCl₃-CdCl₂-HCl(～8.8%)-H₂O were determined at 25 ℃ and the phase diagrams were constructed. The results show that the ternary system was complicated with six equilibrim solid phases CdCl₂·2.5H₂O, CdCl₂·H₂O, 8CdCl₂·YCl₃·15H₂O (8∶1 type), 4CdCl₂·YCl₃·13H₂O(4∶1 type), 5CdCl₂·2YCl₃·26H₂O (5∶2 type) and YCl₃·6H₂O. The quaternary system was also complicated with four equilibrim solid phase CdCl₂·H₂O, 4CdCl₂·YCl₃·13H₂O (4∶1 type), 5CdCl₂·2YCl₃·26H₂O(5∶2 type) and YCl₃·6H₂O. Among the three new compounds 8CdCl₂·YCl₃·15H₂O, 4CdCl₂·YCl₃·13H₂O and 5CdCl₂·2YCl₃·26H₂O, 8CdCl₂·YCl₃·15H₂O was a kind of metastable compound only in ternary system, and it was changed into 4CdCl₂·YCl₃·13H₂O with time. Both 4∶1 type and 5∶2 type existed in ternary and quaternary system, but they were also congruently soluble compounds in quaternary system. They have been prepared from the system and have been characterized by XRD, TC-DTG and DSC.     

MgH2+20%(w)MgTiO3复合材料的吸/放氢性能

为了降低MgH₂的吸放氢温度, 提高其吸放氢动力学性能, 本文通过球磨方法制备了MgH₂+20%(w)MgTiO₃复合储氢材料, 并研究了其储氢性能. X射线衍射(XRD)结果表明, MgTiO₃在与MgH₂球磨过程中生成Mg₂TiO₄和TiO₂, 并且Mg₂TiO₄和TiO₂在体系的吸放氢过程中保持稳定, 能够对MgH₂的吸放氢过程产生催化作用. 程序升温脱附和吸/放氢动力学测试结果表明, 添加MgTiO₃后MgH₂的初始放氢温度从389 ℃降至249 ℃.150 ℃下的吸氢量从0.977%(w)提高到2.902%(w), 350 ℃下的放氢量从2.319%(w)提高到3.653%(w). 同时, MgH₂放氢反应的活化能从116 kJ·mol^-1降至95.7 kJ·mol^-1. 与MgH₂相比, MgH₂+20%(w) MgTiO₃复合材料的热力学与动力学性能均有显著提高, 这主要是由于球磨和放氢过程中原位生成的TiO₂和Mg₂TiO₄具有良好的催化活性.     

3,5-二(2',5'-苯二羧酸)苯甲酸构筑的金属有机配合物的荧光识别及磁性

设计合成了3种新颖的金属有机配合物（MOCs）：{[Pb₂（HL）（phen）]·2H₂O}_n（1）,{[Ni（H₃L）（4,4''-bipy）_1.5（H₂O）₄]·6H₂O}_n（2）和{[Ni₂（HL）（1,4-bibb）（H₂O）]·（CH₃CN）·H₂O}_n（3）（H₅L=3,5-二（2'',5''-苯二羧酸）苯甲酸,phen=1,10-菲咯啉,4,4''-bipy=4,4''-联吡啶,1,4-bibb=1,4-二（苯并咪唑）苯）,并通过单晶X射线衍射、红外光谱（IR）、热重分析（TG）和粉末衍射对它们进行结构表征。结构分析表明1是基于[Pb₂（μ₂-COO）₂（μ₁-COO）₄]SBUs的一维链状结构;2是二维层状结构,其拓扑符号为{4.6²}₂{4².6².8²};3是一个3D网络结构,其拓扑符号为{6².8⁴}{6⁴.8²}₂。进一步研究了配合物荧光和磁性能。荧光检测显示,配合物1在水溶液中可以高灵敏识别Fe³⁺和Cr₂O₇^2-离子。同时研究了配合物1对Fe³⁺和Cr₂O₇^2-猝灭机理。磁性分析表明配合物3中的Ni（Ⅱ）离子之间存在反铁磁相互作用。     

Partial molar volumes and partial molar adiabatic compressibilities of bipyridine and phenanthroline complexes with Fe(II), Co(II), Ni(II), and Cu(II) and chlorides of these metals

Densities and ultrasonic velocities were measured at 25°C for aqueous solutions of bipyridine and phenanthroline complexes [M(bpy)₃]Cl₂ and [M(phen)₃]Cl₂ (M=Fe, Co, Ni, and Cu, bpy=2,2-bipyridine, and phen=1,10-phenanthroline), and chlorides of these metals. The partial molar volumes V ₂ ^o and partial molar adiabatic compressibilities K _s ^o were calculated. For the complex ions, [M(bpy)₃]²⁺ and [M(phen)₃]²⁺, electrostatic interactions with the solvent are not nearly as important as effects due to the hydrophobic ligands bpy and phen. The relationship between V ₂ ^o and K _s ^o of the complex ions and common metal ions are examined.     

Assembling of copper(II) dipicolinate complexes

The role of ancillary ligands, namely imidazole (im), pyridine (py), 2,2′-bipyridine (bpy) and 1,10-phenanthroline (phen) in the assembly of copper(II) dipicolinate complexes are presented. Mononuclear complexes are observed in the case of monodentate ligands. The mononuclear complex [Cu(im)₃L]·4H₂O (1) (L = dipicolinate anion) has a distorted octahedral structure with Z′ = 2, whereas [CuL(py)(H₂O)]·2H₂O (2) adopts distorted square pyramidal geometry. The bidentate ligands bpy and phen favor the formation of dinuclear complexes. The dinuclear complex [CuL(bpy)(μ-L)Cu(bpy)(H₂O)]·9H₂O (3) has one carbonyl oxygen atom of a carboxylate group of dipicolinate acting as a bridging ligand to the copper site that is devoid of a coordinated water molecule. The complex has an angle of 83.55° between the plane of L and bpy attached to one copper site, whereas it has an angle of 78.13° between the plane L and bpy attached to the other copper site. A 1,10-phenanthroline containing dinuclear copper(II) dipicolinate complex, [Cu(phen)(H₂O)(μ-L)Cu(phen)₂][CuL₂]·12H₂O (4), has been structurally characterized. It has an unusual carboxylate bridge.     

Synthesis,structure and spectral studies on mixed ligand copper(II) complexes of diimines and acetylacetonate

Two new mixed ligand complexes of copper(II) with acetylacetonate (acac), 2,2′-bipyridine (bpy) and 1,10-phenanthroline (phen) belonging to the class of cytotoxic and antineoplastic compounds known as CASIOPEINAS^® were synthesized and structurally characterized. Crystals of both complexes [Cu(acac)(bpy)(H₂O)]NO₃ · H₂O (1), [Cu(acac)(phen)Br] (2) contain square pyramidal Cu(II) complex species. In frozen solution both compounds give well resolved EPR spectra with very similar parameters.     

Ru(bpy)_3 掺杂的核壳型 Ag@SiO_2 荧光纳米粒子的制备及表征

利用反相微乳液法制备了一种三联吡啶钌掺杂的核壳型Ag@SiO2纳米粒子。利用透射电子显微镜、荧光光谱和紫外-可见光谱等对其进行表征,并对其光稳定性和表面氨基进行了测定,结果表明该纳米粒子单分散性良好,呈规则球状、粒径为(60±5)nm,由于银的金属增强荧光效应,相对没有银核的Ru(bpy)3掺杂的SiO2纳米粒子,其荧光强度增强了2倍,光稳定性也有所提高。     

Reactivity investigations of some chosen peroxo-vanadium(V), manganese(III) and chromium(VI) compounds

An interpretative account of the results of reactions in aqueous medium of a highly peroxygenated vanadium(V) complex, K [V(O_{2 3}]·3H₂O, with different organic and inorganic substrates is presented. The reactions were monitored by solution EPR spectroscopy and isolation of products at different stages of the reactions. Redox reactions between diperoxide, K[VO(O₂)₂(H₂O)] and VOSO₄ were conducted. The results of the investigation suggest that secondary oxygen exchange-reaction occurs which not only depends on but also utilises the intermediates in the primary reaction during diperoxovanadate-dependent oxidation of VOSO₄. In an interesting reactiontris(acetylacetonato)-manganese(III), Mn(acac)₃, on being reacted with a hydrogen peroxide adduct, KF·H₂O₂, and bpy and phen afforded crystalline [Mn(acac)₂(bpy)] and [Mn(acac)₂(phen)], respectively. The X-ray structural analysis of [Mn(acac)₂(phen)] showed that the compound crystallised in orthorhombic space groupPbcn. The structure consists of a pseudooctahedral Mn(II) ion being bound to two acac⁻(C₅H₅O ₂ ⁻ ) and a phen ligand with the molecule lying on two-fold axis. Reactivity profiles of two new chromium(VI) reagents viz., pyridinium fluorochromate, C₅H₅NH[CrO₃F] (PFC), and quinolinium fluorochromate C₉H₇NH [CrO₃F] (QFC), have been presented. The compounds are capable of acting as both electron-transfer and oxygen-atom-transfer agents. The X-ray analysis of PFC crystals reveals that the compound crystallises in the orthorhombic space group CmcZ₁. The structure consists of discrete pyridinium cations and CrO₃ F anions with no significant hydrogen bonding. This results in total disorder of the pyridinium cation. The tetrahedral [CrO₃ F]⁻ ion lies on a crystallographic mirror plane.     

Synthetic,structural and spectroscopic studies of complexes derived from the copper(II) perchlorate/fumaric acid/N,N′-chelates tertiary reaction systems

The synthetic investigation of the Cu(ClO₄)₂·6H₂O/fumaric acid (H₂fum)/N,N’-chelates (1,10-phen, 2,2′-bpy) tertiary reaction systems has yielded mononuclear, dinuclear and tetranuclear complexes, and three coordination polymers. The chemical and structural identity of the products depends on the solvent, the absence or presence of external hydroxides in the reaction mixtures and the N,N’-donor. Three fumarato(−2) complexes, i.e. compounds [Cu₂(fum)(phen)₄](ClO₄)₂·2H₂O (1·2H₂O), [Cu(fum)(phen)(H₂O)]_n (3) and [Cu₂(fum)(bpy)₂(H₂O)₂]_n(ClO₄)_2n (6), were isolated and structurally characterized, and four non-fumarato complexes, i.e. compounds [Cu₄(μ₃-ΟΗ)₂(μ₂-ΟΗ)₂(phen)₄(H₂O)₂](ClO₄)₄·2H₂O (2·2H₂O), [Cu(ClO₄)(phen) (MeCN)₂(H₂O)](ClO₄) (4), [Cu(ClO₄)(phen)(MeCN)₂]_n(ClO₄)_n (5) and [Cu(ClO₄)₂(bpy)(MeCN)₂] (7), were simultaneously obtained from the reaction systems investigated. The coordination versatility of the fumarato(−2) ligand is reflected to the three different coordination modes observed in 1·2H₂O, 3 and 6; the monodentate bridging μ₂-κO:κO′ mode in 3, the asymmetric chelating bridging μ₂-κO:κO′:κO′′:κO′′′ mode in 1·2H₂O and 3, and the syn,syn bridging μ₄-κO:κO′:κO′′:κO′′′ mode in 6. The crystal structures of the complexes are stabilized by intra- and inter-molecular hydrogen bonding and π–π stacking interactions leading to interesting supramolecular architectures. Characteristic IR bands of the complexes are discussed in terms of the known structures, and the coordination modes of the fum²⁻ ligands.     

Preparation of a new core-shell Ag@SiO2 nanocomposite and its application for fluorescence enhancement

Ag@SiO₂ nanoparticles with different shell thicknesses were synthesized via modified Stöber method. Rhodamine B isothiocyanate was covalently bound onto the surface of Ag@SiO₂ nanoparticles to form fluorescent core-shell Ag@SiO₂ nanocomposites. Effects of shell thickness on the fluorescence enhancement were examined using the corresponding nanobubbles prepared by cyanide etching as a control. The result showed that the fluorescence enhanced as the shell thickness increased till the distance between fluorophore and metal core reached about 75 nm with the optimal enhancement factor of ∼5-folds. Further increasing of fluorophore-metal distance caused a decrease in the enhancement factor.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

New 4,5-dichlorophthalhydrazidate-bridged chained coordination polymers

The hydrothermal self-assemblies of Pb²⁺/Cd²⁺ salt, 4,5-dichlorophthalic acid (dcpha), N₂H₄·H₂O together with 1,10-phenanthroline·H₂O (phen) or 2,2′-bipyridine (bpy) generated two new monoacylhydrazidate-bridged 1-D chained coordination polymers [Pb₂(DCPTH)₄(phen)₂] 1 and [Cd₃(DCPTH)₂(dcph)₂(bpy)₂] 2 (DCPTH=4,5-dichlorophthalhydrazidate, dcph=4,5-dichlorophthalate). The monoacylhydrazidate ligand DCPTH originated from the hydrothermal in situ acylation reaction between dcpha and N₂H₄·H₂O. In compound 1, two types of coordination modes for DCPTH are found, which link alternately the Pb(II) centers into a 1-D chain structure of compound 1 with ancillary phen molecules. In compound 2, DCPTH and dcph as the mixed bridges extend the Cd(II) centers into a 1-D chain structure of compound 2 with auxiliary bpy molecules. DCPTH in compound 2 shows a different coordination mode from those observed in compound 1.