分子动力学方法研究纳米摩擦问题

分子动力学方法中忽略了电子相互作用,因而具有高效率,可以从原子水平研究大体系的动态过程。随着计算技术的进步,分子动力学逐渐在纳米工程领域显现了巨大的应用前景。本文综述了利用分子动力学方法从微观角度研究摩擦行为的进展,同时也就其进一步的应用做了展望。     

紫外-可见分光光度法测定电镀液中纳米Al2O3含量的研究

采用紫外-可见分光光度法测定纳米Al2O3电镀液中(四种不同电镀液)纳米微粒的含量。研究表明,这些体系均存在空白液吸光度很低、工作液吸光度较高的较宽的波长区间,是光度分析法中理想的测定体系,标准曲线的相关系数均大于0．98,其平均相对误差(2．93％)远远小于重量分析法(20．7％)。     

从零维到三维的金范式: 金单质概念的新发展

含有零维金纳米球的胶体金,在古埃及就已经被用于制造彩色玻璃,但直到20世纪,人们才对其进行系统的研究。20世纪下半叶,一维金纳米棒的合成及其奇异的光学性质引起了科学家对金纳米颗粒的关注。随后,二维金纳米片、三维金纳米哑铃等金纳米颗粒的相继出现,丰富和发展了金单质的概念。几种新的金单质的发现,构建了从零维到三维的金范式,从而启发人们对“金单质”及其应用进行更加深入的探究。     

PMMA/PS纳米复合材料的制备及分散相稳定性研究

纳米复合材料具有许多优异的性能,但是由于纳米粒子常常很难以纳米尺寸均匀地分散在基体中,有时即使实现了纳米级分散,在后加工或应用过程中又会发生二次团聚,使得纳米材料的特性不能充分发挥．因此,要获得性能优异的纳米复合材料首先必须解决纳米材料在基体中的均匀、稳定分散问题．     

第2届国际电化学会(ISE)春季会议纪要

第2届国际电化学会(ISE)春季会议于2004年3月7日至10日在厦门大学召开,会议由厦门大学固体表面物理化学国家重点实验室主办,田中群教授担任会议主席,本次会议主题为“纳米尺度上的电化学-构筑、表征、理论”,主要包括以下三方面内容：(1)运用电化学新方     

纳米通道内表面浸润性对气泡的作用

运用分子动力学模拟方法研究了在质量力驱动下不同浸润性壁面纳米通道中气泡的分布及其运动状况, 提出了一种统计纳米通道中气泡运动速度的方法. 结果显示, 在亲水性壁面的纳米通道中, 气泡位于通道中间, 气泡的运动速度接近但小于通道中心流速, 在势能强度较大时, 壁面吸附的分子较多, 气泡也较大, 反之则气泡较小; 对超疏水性壁面, 气泡则位于固壁附近, 两个壁面形成对称的一对气泡, 气泡的运动速度接近但大于边缘速度. 流体总的流动速度随着流体粒子与壁面粒子作用的减弱而增大, 滑移速度则逐渐从负转变为正.     

纳米金属铜与纳米氧化锌之间相互作用的EPR和XPS研究

由于纳米材料独特的表面效应、电子效应及量子尺寸效应 ,已被广泛应用于各个领域 .有关纳米材料研究的报道很多 [1～ 7] ,大部分是关于纳米材料的制备[1～ 4 ] 及其特性研究 .对于纳米金属及纳米氧化物之间相互作用的研究迄今尚未见报道 .本文采用超声分散和机械研磨法物理混合纳米金属铜粉和纳米氧化锌 ,借助 EPR和 XPS技术对样品进行了表征 ,发现混合体系出现了 Cu2 + 的顺磁信号 ,Zn L3M4 5M4 5俄歇动能和 O1s的电子结合能亦发生了变化 ,表明纳米 Cu0 和纳米 Zn O之间存在相互作用 ,作用形式为 Cu— O—Zn.1　实验部分1 .1　样品…     

纳米粒子在食源性致病菌检测中的应用进展

食品安全事关人民群众的身体健康和生命安全,而食源性致病菌是食品安全的主要影响因素。由食源性致病菌引起的疾病和死亡持续威胁着全球的公共卫生安全。因此,开发快速、准确且灵敏的食源性致病菌检测方法是预防食源性疾病暴发和确保食品安全的关键。常规检测方法费时费力,需要昂贵的设备和专业的人员,应用受限。近年来,随着纳米技术的快速发展,纳米粒子凭借其小尺寸、高比表面积和高反应活性等理化特性成为食源性致病菌检测领域的研究热点。此外,将识别元件修饰于纳米粒子表面并结合新颖的分析技术,能提高检测的特异性和灵敏度。该综述主要总结和比较了磁性纳米粒子、贵金属纳米粒子、荧光纳米粒子和二氧化硅纳米粒子在食源性致病菌检测中的应用,以期为食源性致病菌的快速分析提供思路。     

纳米无机粒子/聚合物复合材料界面结构的研究

纳米粒子具有许多特性,聚合物中加入纳米粒子可以制备得到性能更加优异的复合材料,其中纳米粒子和聚合物基体间的界面对决定纳米复合材料的性能起着重要作用.本文综述了近些年来表征纳米无机颗粒/聚合物复合材料中界面结构的研究手段,如红外光谱(FTIR)、热重(TGA)、电子显微镜、小角中子散射(SANS)及小角X射线散射(SAXS)等,及界面结构与复合材料力学性能和热稳定性关系的研究进展.同时也介绍了纳米粒子对复合材料的渗透、光催化、阻燃、介电及导电性能的影响.最后对这一领域的研究进行了展望.     

PANI／Ce（OH）3-Pr2O3·3H2O／NanoG复合材料制备与表征

开发了反胶束模板-原位聚合纳米复合法制备聚苯胺（PANI）／Ce（OH）3-Pr2O3·3H2O／石墨纳米薄片（NanoG）纳米复合材料的方法。膨胀石墨在乙醇水溶液中经超声处理制得石墨纳米薄片,以苯胺的氯仿溶液为油相,稀土金属离子Pr^3＋、Ce^3＋水溶液为水相,依靠表面活性剂十六烷基三甲基溴化铵（CTAB）自组装形成的反胶束为模板。制备PANI／Ce（OH）3-Pr2O3·3H2O／NanoG复合材料。利用红外光谱（FTIR）、扫描电镜（SEM）、透射电镜（TEM）和X-射线衍射（XRD）对该复合材料进行了表征和分析,研究了其导电性能和热性能。结果表明,PANI／Ce（OH）3-Pr2O3·3H2O／NanoG复合材料各相分散均匀,稀土纳米粒子在体系中以棒状的形态分布。热重分析表明,该复合材料的热稳定性明显提高;导电性研究说明,石墨纳米薄片的特殊的结构（较大的径厚比）对其在聚合物基体中形成导电网络具有重要作用：PANI／Pr2O3-Ce（OH）3/NanoG纳米复合材料的渗滤阀值低于1.0wt％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.