Comparative evaluation of aromatic bonded phases for reversed-phase chromatography

Summary Retention factors for alkylbenzenes, polyaromatic hydrocarbons, steroids, amino acids, peptides, nucleotides, nucleosides were measured with phenylsilica, benzylsilica, phenethylsilica and octylsilica stationary phases using hydro-organic eluents containing methanol, acetonitrile or tetrahydrofuran. The retention behavior of the three arylsilicas was similar but distinctly different from that of octylsilica. The difference is attributed to the chemical properties of the organic ligates, i.e., of the alkyl- and aryl functions. The slight variations of retention behavior observed with arylsilicas on the other hand are believed to arise from differences in the pertiment phase ratios. The method used for interpretation of data is based on the analysis of the pertinent retention moduli, relative column retentivities and relative phase ratios. In addition, relationships between eluite structure and retention were examined. The results give insight into various phenomena underlying the retention process in reversed-phase chromatography.Part IV in the series on Stationary Phase Effects in Reversed-Phase Chromatography.     

Comparative study of some commercial chemically bonded phases in classical reversed-phase chromatography and in ion-pair reversed-phase liquid chromatography

Summary The behaviour of various octadecyl commercial bonded phases are compared in classical reversed-phase chromatography and in ion-pair reversed-phase chromatography. Great differences are exhibited by the packings studied according to the polarity of the solutes. Whereas hydrocarbonaceous bonded phases show very similar selectivity versus apolar or weakly polar solutes, great differences are observed when analyzing more polar solutes even when ion-pair reversed-phase chromatography is performed.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Large scale purification of synthesized oligodeoxyribonucleotides by reversed-phase chromatography

Summary A reversed-phase chromatographic column suitable for the purification of chemically synthesized large oligodeoxyribonucleotides (oligo-DNA) was prepared. The specifications of this column are; the selected silica (Toyo Soda silica) with large pore size (at least 150 ) and small particle diameter (5 m desired) should be grafted only with monochloro alkylating reagent of long alkyl chain (sufficiently C₁₈) so that the carbon content of the resultant packing material is 15–16%. Using this column, we could isolate the targeted large oligo-DNA (up to 50mer) in a large scale (75 g per one cycle) from the impurities in the reaction mixture formed during the automated synthesis by the phosphite method.     

Convergence of retention for small solutes in reversed-phase liquid chromatography

Summary It is shown theoretically that when the concentration of organic solvent in the mobile phase increases, or solute size decreases, log k values of small solutes in reversed-phase liquid chromatography (RPLC) will tend to have a minimum value called the convergence point. A theoretical model for evaluating the convergent coordinates of small solutes is presented by using a stoichiometric displacement model for retention (SMDR). The physical meaning of the coordinates of each kind of convergence are also elucidated. The convergence points have either two-dimensional coordinates with a common ordinate (the logarithm of the phase ratio of the column, log ) or threedimensional corrdinates with two common axes: — log and the logarithm of the molar concentration of the pure displacing agent in mobile phase, log a_D. The other axis relates to the nature of the solutes, such as carbon number of a homolog, van der Waal's surface area, hydrophobic fragment constant etc. for the latter and those and/or concentration axis for the former. The model was tested with published data and found to give a good fit.     

The determination of starting conditions for modifier optimization in reversed-phase HPLC

Summary After a brief introduction of the subject, the paper focusses on the first step in any optimization procedure: the delineation of the parameter space, wherein the global optimum is to be found. For organic modifier optimization in reversed-phase liquid chromatography it is shown that the necessary information can be derived from a single water-methanol gradient. It first yields an estimate of the total number of solutes in the sample, which is vital to define the peak capacity needed to achieve separation at a certain confidence level. Next, the gradient allows the prediction of suitable isocratic methanol binary solvents, and transfer rules formulate the iso-eluotropic composition of the common binary solvents (tetrahydrofuran and acetonitrile). Because all predictions are based on a statistical analysis of a limited data base, attention is given to the practical situation where an actual sample deviates from the average solute behaviour. Such deviations are revealed in the first isocratic run and can be used to arrive at a better estimate of solute retention.     

Preparation and retention characteristics of different phenyl phases for reversed-phase liquid chromatography

Summary Three different phenyl phases were prepared. The amount of organic moiety bound on silica support was determined from thermogravimetric curves of the modified silica gel. The specific surface areas of gels were obtained from nitrogen sorption measurement at –196°C. The effect on separation and selectivity of the different bonded-phenyl functional groups was studied. The selectivity of the phenyl-bonded silica gels was examined and compared with octadecyl (ODS) silica in liquid chromatography. Corresponding to the high surface concentration of functional groups, the capacity factors of solutes, normalized to unit surface area of the adsorbent, k/S_BET were found to decrease in the sequence phenylmethyl>diphenyl>triphenyl. Polar solutes are retained in greater extent on the phenyl phases than on the ODS phase.     

Convenient estimation of the mobile phase volume for water-rich eluents in reversed-phase liquid chromatography

Summary Oxalodihydroxamic acid is proposed as a UV-detectable substitute for D₂O for the convenient estimation of the mobile phase volume (V_m) of water-rich hydro-organic eluents in reversed-phase liquid chromatography. The retention volume of oxalodihydroxamic acid deviates less than 6% from that of D₂O in 0 to 50% methanol-and acetonitrile-water eluents on C₁, C₈, and C₁₈ reversed-phase supports; it is independent of the amount injected from 10ng to 20μg when monitored at 254nm, although the sensitivity is about four-fold greater at 219 nm. The pH should be maintained between about 2 and 4. The deviation from the D₂O retention volume on supports of typical porosity is attributed, at least in part, to a size-exclusion effect. Simple hydroxamic acids can be used as a homologous series for the estimation of V_m over most of the methanol- and acetonitrile-water concentration ranges by the linearization of retentions of homologous series method. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Study of dispersive and inductive electrostatic interactions in reversed-phase thin-layer chromatography

Summary The retention behaviour of a group of polycyclic aromatic hydrocarbons having nearly equal ionization potentials but different molecular polarizability values was investigated using reversed-phase HPTLC. Normal alcohols were applied as the mobile phase. The relationships between the retention parameters and molecular polarizabilities of the solutes and solvents are discussed.     

反相离子对色谱法测定间苯二磺酸钠

运用反相高效离子对色谱法测定了间苯二磺酸钠.采用C18色谱柱(250 mm×4.6 mm i.d.,5 μm),流动相为V(乙腈):V(50 mmol/L NaH2PO4)＝7:93(含0.05%四丁基氢氧化铵),流速为1.0 mL/min,检测波长210 nm,柱温:30 ℃.间苯二磺酸钠在0.32×10-3～81.92×10-3 mg/mL范围内线性关系良好,r＝0.9999,加样回收率为98.8%～101.1%,RSD＝0.73%(n＝7).本法为工业生产间苯二磺酸钠提供了分析方法.     

Computer-assisted prediction of small peptide sequencing in reversed-phase liquid chromatography

Summary A computer-assisted prediction system for small peptide sequencing has been constructed based on the retention prediction approach in reversed-phase liquid chromatography. The system has the basic function to predict retention of small peptides at any chromatographic conditions and this function can be useful for the prediction of sequencing. The outline of the system construction and the performance is discussed.     

Study of triacontyl-functionalized monolithic silica capillary column for reversed-phase capillary liquid chromatography

A novel stationary phase triacontyl-functionalized monolithic silica capillary column was successfully prepared for reversed-phase capillary liquid chromatography. The performance of the monolithic silica capillary column coated with triacontyl chain for the separation of alkylbenzenes, xylene isomers, polycyclic aromatic hydrocarbons, and mixture of α- and β-carotenes was studied, which was compared to that using the monolithic silica capillary column coated with octadecyl chain. The comparison results showed that triacontyl-functionalized monolithic silica capillary column would be a promising media to be used for the separation of isomeric solutes with long chain in reversed-phase capillary liquid chromatography.     

Evaluation of octadecyl-bonded alumina for separations of proteins and peptides by reversed-phase high-performance liquid chromatography

Summary A recently-developed octadecyl-bonded alumina (ODA) stationary phase was evaluated for the separation of peptides and proteins by reversed phase high performance liquid chromatography. Using standard water-acetonitrile mobile phase gradients containing 0.1 % trifluoroacetic acid, the average peak capacity obtained for the separation of a mixture of ribonuclease a, cytochrome c, lysozyme and carbonic anhydrase on an ODA column are similar to that obtained on a widely used octadecylsilane (ODS) column. However, overall chromatographic resolution of the components of this mixture on ODA is inferior to that obtained on ODS. Cytochrome c peak areas were found to be 50% smaller on the ODA column than on ODS. On the other hand, both peak capacities and resolutions of octapeptide mixtures were found to be generally superior on the ODA column, and peak areas for a representative octapeptide were found to be virtually identical for both ODA and ODS columns. The differences in the results obtained on the ODA and ODS columns for these separations are attributed to the smaller pore size and unique fused-microplatelet shape of the ODA particles. Comparisons of the separations of the tryptic digest of cytochrome c on the ODS and ODA columns demonstrate that the ODA phase is potentially as useful as ODS for peptide mapping applications.     

Column selectivity in reversed-phase liquid chromatography. VII. Cyanopropyl columns

Eleven cyanopropyl ("cyano") columns were characterized by means of a relationship developed originally for alkyl-silica columns. Compared to type-B alkyl-silica columns (i.e., made from pure silica), cyano columns are much less hydrophobic (smaller H), less sterically restricted (smaller S*), and have lower hydrogen-bond acidity (smaller A). Because sample retention is generally much weaker on cyano versus other columns (e.g., C8, C18), a change to a cyano column usually requires a significantly weaker mobile phase in order to maintain comparable values of k for both columns. For this reason, practical comparisons of selectivity between cyano and other columns (i.e., involving different mobile phases for each column) must take into account possible changes in separation due to the change in mobile phase, as well as change in the column.     

Optimization of stepwise gradient elution in reversed-phase chromatography

Summary Equations describing multi-step gradient elution with a mobile phase of constant composition in each step were derived. These equations useful for calculating the retention volumes in both gradient HPLC and TLC were derived on the basis of the relationship between the isocratic capacity factor and the volume fraction of the organic modifier. The validity of the equations was experimentally verified in a LiChrosorbRP-18-water/methanol system for 11 methyl- and chlorobenzenes and phenols. A satisfactory agreement between the theoretical and experimental k′ values was found.     

Retention prediction of small peptides in reversed-phase liquid chromatography

Summary Retention prediction of small peptides (up to four residues) in reversed-phase liquid chromatography has been investigated, considering the contributions of side chains in each position to the peptide retention. In isocratic elution the retention of peptides could be predicted within about 8% relative error.     

Retention prediction of o-phthalaldehyde amino acid derivatives in reversed-phase liquid chromatography

Summary Retention prediction of o-phthalaldehyde amino acid derivatives in reversed-phase liquid chromatography has been investigated. The retention of all derivatives could be predicted within about 10% relative error under the appropriate separation conditions in both isocratic and gradient-elution modes.     

Polymer-based monolithic microcolumns for hydrophobic interaction chromatography of proteins

Monolithic capillary columns for hydrophobic interaction chromatography (HIC) have been prepared by thermally initiated, single-step in situ polymerization of mixtures of monovinyl monomers including butyl methacrylate and/or 2-hydroxyethyl methacrylate, with a divinyl crosslinker glycerol dimethacrylate or 1,4-butanediol dimethacrylate using two different porogen systems. Two porogenic solvent mixtures were used; one "hydrophilic", consisting of water, butanediol, and propanol, and one "hydrophobic," comprising dodecanol and cyclohexanol. The porous structures of the monoliths were characterized and their performance was demonstrated with a separation of a mixture of myoglobin, ribonuclease A, and lysozyme under conditions typical of HIC.     

Preparation and characterization of lauryl methacrylate-based monolithic microbore column for reversed-phase liquid chromatography

Poly(lauryl methacrylate-co-ethylene dimethacrylate) monoliths were in situ synthesized within the confines of a silicosteel tubing of 1.02 mm i.d. and 1/16" o.d. for microbore reversed-phase HPLC. In order to obtain practically useful monoliths with adequate column efficiency, low flow resistance, and good mechanical strength, some parameters such as total monomer concentration (%T), cross-linking degree (%C) and polymerization temperature were optimized. High-efficiency monoliths were successfully obtained by thermal polymerization of a monomer mixture (40%T, 10%C) with a binary porogenic solvent consisting of 1-propanol and 1,4-butandiol (7:4, v/v) at a high temperature of 90 °C. The morphology and porous structure of the resulting monoliths were assessed by scanning electron microscope (SEM) and inverse size exclusion chromatography (ISEC), while the column performance was evaluated through the separations of a series of alkylbenzenes in acetonitrile-water (50:50, v/v) eluent. At a normal flow rate of 50 μL/min (corresponding to 1.66 mm/s), the optimized monolithic columns typically exhibited theoretical plate numbers of 6000 plates/10 cm-long column for amylbenzene (k>40), and the pressure drop was always less than 1 MPa/10 cm. The monoliths, which were chemically anchored to the tube inner wall surface using a bifunctional silylation agent, exhibited adequate mechanical strength of up to 12-13 MPa, and were properly operated at 10 times higher flow rate than normal, reducing the separation time to one tenth. The lauryl methacrylate-based monolithic column was applied to a rapid and efficient separation of ten common proteins such as aprotinin, ribonuclease A, insulin, cytochrome c, trypsin, transferrin, conalbumin, myoglobin, β-amylase, and ovalbumin in the precipitation-redissolution mode. Using a linear CH(3)CN gradient elution at a flow rate of 500 μL/min (10-times higher flow rate), 10 proteins were baseline separated within 2 min.     

Interconversion of gradient and isocratic retention data in reversed-phase liquid chromatography: Effect of the uptake of eluent modifier on the retention of analytes

The experimental technique of mass spectrometric tracer pulse chromatography was used to study the effect of the sorption of eluent components by a C₁₈-bonded silica RPLC packing on the retention of a series of test analytes during isocratic and gradient elution experiments. The analytes of interest were a substituted phenol, a substituted nitroaniline, an anti-malaria drug, tetrahydrofuran, and methanol. The eluent used was a mixture of acetonitrile and water. The solutes and isotopically labeled eluent components were injected at fixed time intervals during each gradient run. The mass specific detector allowed the assignment of individual analyte peaks even when there was overlap in the chromatograms from successive injections. Thus, the retention time of each analyte could be determined as a function of gradient slope and initial eluent composition at the time of each injection. Experimental gradient retention time data were then compared with the calculated results from two theoretical models. The first model assumed the velocity of the mobile phase and eluent were equal. The second and most realistic model assumed the velocity of the eluent was less than the velocity of the mobile phase due to the uptake of eluent by the stationary phase. Gradient retention times predicted by the two models were reasonably accurate with the sorption model giving slightly more accurate values. Inverse calculations, i.e., calculation of isocratic retention factors from gradient elution data were also carried out with very similar results. That is, the model allowing for the uptake of eluent was slightly more accurate than the model assuming no eluent-stationary phase interaction.