Radiofluorination of 2-fluoropyridines by isotopic exchange with [<Superscript>18</Superscript>F]fluoride

In homoaromatic systems, isotopic exchange (¹⁸F/¹⁹F) was previously (J Label Compd Radiopharm 18(12):1721–1730 [2], J Chem Soc Perkin Trans 1(3):295–298 [3]) proven to be advantageous, yet in general specific activity is thought to be low. For heteroaromatic systems, in particular, very few examples are published regarding the ¹⁸F-labelling of 2-substituted pyridines (J Label Compd Radiopharm 42:975–985 [9]). Therefore, in 2-fluoropyridines, we decided to study the ¹⁸F labelling by isotopic exchange (¹⁸F/¹⁹F). The radiochemical yield for 2-fluoropyridine was 90 ± 2%. Even if 2-fluoropyridine was substituted by an electron-donating group such as a methyl or a methoxy group, radiochemical yields were 80 ± 1 and 78 ± 1%, respectively. Although in benzenes, these substituents are known to decrease nucleophilic substitutions by ¹⁸F-Fluoride significantly. Moreover, by choosing appropriate concentrations of 2-fluoropyridines, reasonably high specific activities up to 10 GBq/μmol were obtained.     

Investigation of Large Polychloride Anions: [Cl11]−, [Cl12]2−, and [Cl13]−

For decades the chemistry of polyhalides was dominated by polyiodides and more recently also by an increasing number of polybromides. However, apart from a few structures containing trichloride anions and a single report on an octachloride dianion, [Cl₈]^2?, polychlorine compounds such as polychloride anions are unknown. Herein, we report on the synthesis and investigation of large polychloride monoanions such as [Cl₁₁]^? found in [AsPh₄][Cl₁₁], [PPh₄][Cl₁₁], and [PNP][Cl₁₁]?Cl₂, and [Cl₁₃]^? obtained in [PNP][Cl₁₃]. The polychloride dianion [Cl₁₂]^2? has been obtained in [NMe₃Ph]₂[Cl₁₂]. The novel compounds have been thoroughly characterized by NMR spectroscopy, single‐crystal Raman spectroscopy, and single‐crystal X‐ray diffraction. The assignment of their spectra is supported by molecular and periodic solid‐state quantum‐chemical calculations.     

Condensed isoquinolines. 34.* Transformations of 4H-thieno-[3',2':5,6]- and 4H-thieno[2',3':5,6]pyrimido-[1,2-<Emphasis Type="Italic">b</Emphasis>]isoquinolines

Syntheses are given for previously unreported 4-chloro derivatives of 4H-thieno[3′,2′:5,6]- and 4H-thieno[2′,3′:5,6]pyrimido[1,2-b]isoquinolines and the reactions of these compounds with N- and S-nucleophiles were studied. The spectral characteristics and biological activity of the positional isomers were compared. The electron spectra most clearly reflect the differences related to the position of the sulfur atom in these quasiaromatic systems. *For Communication 33, see [1]. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 619–630, April, 2009.     

Self－assembly of Novel Hetero[3]rotaxane, [2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4‐dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor‐acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotazane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF₆ was assembled by using donor‐acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

Nucleophilic aromatic substitution by [<Superscript>18</Superscript>F]fluoride at substituted 2-nitropyridines

For the radiofluorination of benzenes and benzene derivatives, the electrophilic reaction with [¹⁸F]F₂ is a very common route. Yet, aromatic nucleophilic substitution (S_NAr) by n.c.a [¹⁸F]fluoride, which can be produced efficiently in high amounts, has been considered to be very desirable. However, to facilitate ¹⁸F-labelling via S_NAr at an electron rich aromatic system, an appropriate leaving group must be present together with an auxiliary group in ortho or para position to the leaving group. An interesting alternative for the auxiliary group is the heteroatom of a heteroaromatic system, for which pyridine is a leading example. Dolci et al. (J Label Compd Radiopharm 42:975–985, 1999) have evaluated the scope of the nucleophilic aromatic fluorination of 2-substituted pyridine rings using the activated K [¹⁸F]F-K₂₂₂ complex. As methyl and methoxy groups are known to enhance the electron density of an aromatic system by the +I and the +M effect, respectively, S_NAr is unlikely to occur. Until now, the effect of these substituents has not been studied towards the ¹⁸F-radiofluorination of substituted 2-nitropyridines by use of [¹⁸F]fluoride. Therefore, we have investigated the effect of methoxy and methyl groups in 2-nitropyridines. The results showed that 3-methoxy-2-nitropyridine and 3-methyl-2-nitropyridine can efficiently be substituted by [¹⁸F]fluoride with high RCY’s (70–89%) in short reaction times (1–30 min) at a reaction temperature of 140 °C. Moreover, 3-methoxy-6-methyl-2-[¹⁸F]fluoropyridine was obtained from the corresponding nitro-precursor in a high yield of 81 ± 1% after 30 min at 140 °C. In case of 2-nitropyridines data indicates the effect of methyl and methoxy groups on S_NAr to be of minor importance.     

Langmuir and Langmuir–Blodgett Films from Amphiphilic Pillar[5]arene‐Containing [2]Rotaxanes

Amphiphilic pillar[5]arene‐containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4‐diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X‐ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression–decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π–π interactions between neighboring macrocycles in the thin film.     

Synthesis and structure characterization of unsymmetrical oxacalix[2]benzene[2]pyrazines

The synthesis of two unsymmetrically linked oxacalix[2]benzene[2]pyrazines (1 and 2) is described. X-ray single crystal structure analysis revealed a highly distorted 1,3-alternate conformation of compound 1 (containing ortho- and meta-diphenol components) and a distorted boat conformation of compound 2 (containing meta- and para-diphenol components). Oxacalix[2]benzene[2]pyrazine containing both ortho- and para-diphenol components was not obtained via similar synthetic strategy.     

Détermination par Résonance Magnétique Nucléaire de la Configuration d'alcools Bicycliques [4.2.0] et Tricycliques [6.4.0.02,7] ou [5.4.0.02,6]

The configuration of various bicyclo[4.2.0]octanols has been established by ¹H NMR spectroscopy, with Eu(dpm)₃ as shift reagent. The intrinsic parameters Δ and K have been obtained and used as structural probes. Moreover, detailed data analysis showed that, contrary to the generally accepted concept, the vicinal coupling constant between trans cyclobutanic protons can be larger than that between cis protons. The chemical shifts obtained by ¹³C NMR spectroscopy are consistent with the proposed structures. The results have been extensively used to determine unambiguously the configuration of tricyclo[6.4.0.0^2,7]dodecanols and tricyclo[5.4.0.0^2,6]undecanol.     

Ionic Liquid-Mediated Facile Synthesis and Antimicrobial Study of Thiazolo [2,3-b]Benzo[h]Quinazolines and Thiazino[2,3-b] Benzo-[h]Quinazolines

Abstract

8-Methoxy-4-phenyl-3,4,5,6-tetrahydrobenzo[h]quinazoline-2(1H)-thione, obtained by the condensation of 2-benzylidene-6-methoxy-3,4-dihydronapthalene-1(2H)-one with thiourea, on reaction with chloroacetic acid and 3-chloropropanoic acid in the presence of the ionic liquid N-methylpyridinium tosylate furnishes 3-methoxy-7-phenyl-7,10-dihydro-5H- benzo[h]thiazolo[2,3-b]quinazoline-9(6H)-one and 3-methoxy-7-phenyl-5,6,10,11-tetrahydro- benzo[h][1,3]thiazino[2,3-b]quinazoline-9(7H)-one. Further, condensation of the thione with 1,2-dibromoethane and 1,3-dibromopropane yields 3-methoxy-7-phenyl-6,7,9,10-tetrahydro-5 H-benzo[h]thiazolo[2,3-b]quinazoline and 3-methoxy-7-phenyl-5,6,7,9,10,11-hexahydrobenzo [h][1,3]thiazino[2,3-b]quinazoline respectively. Arylidene derivatives have been obtained by two routes. The structures of the cyclized compounds have been established on the basis of elemental analysis and spectroscopic data. The synthesized compounds were screened for antimicrobial activity. Some of the compounds showed promising antimicrobial activities.     

Synthesis of Cucurbit[5]uril-Spermine-[2]Rotaxanes

Cucurbit[5]uril and decamethylcucurbit[5]uril are cyclic pentamers built from glycoluril or dimethylglycoluril respectively. Two different experimental methods have been used for the synthesis of the different [2]rotaxanes. The formed rotaxanes are characterized using ¹H-NMR spectroscopy, mass spectrometry and elemental analysis. In contrast to cucurbit[5]uril no [2]rotaxane could be obtained with decamethylcucurbit[5]uril.     

2-Halobenzoyl chlorides in the synthesis of [1,3,4]thiadiazolo[3,2-<Emphasis Type="Italic">a</Emphasis>]quinazolin-5-one derivatives

New nitro and sulfonamide derivatives of [1,3,4]thiadiazolo[3,2-a]quinazolin-5-one have been synthesized by cyclocondensation of 1,3,4-thiadiazol-2-amines with 2-halobenzoyl chlorides containing electron-withdrawing substituents in positions 3, 4, and 5. An improved procedure has been proposed for the preparation of intermediate 2-fluoro-N-(5-methyl-1,3,4-thiadiazol-2-yl)benzamides containing a sulfamoyl group in the 5-position via selective acylation of 5-methyl-1,3,4-thiadiazol-2-amine with 5-chlorosulfonyl-2-fluorobenzoyl chloride, followed by sulfonylation of amines.     

Synthesis of 1H-[1]benzothiopyrano[3,4-d]imidazol-4-ones

By the condensation of 3,4-diaminothiocoumarins containing primary or secondary amino groups in position 4, with formic and acetic acids (or acetic anhydrides), a number of 1H-[1]benzothiopyrano[3,4-d]imidazol-4-ones and their 2-methyl derivatives have been synthesized; the latter have also been obtained from the corresponding 3-monoacetylamino-4-aminothiocoumarins. By the acetylation of 3-4-diaminothiocoumarins with tertiary amino groups in positions 4 their 3-diacetyl derivative has been obtained, and these, under the action of bases, have been converted into 3-N-acetyl derivatives. The structures of the compounds synthesized have been confirmed by IR, PMR, and mass spectroscopy.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 479–483, April, 1980.     

Foldamers in pseudo[2]rotaxanes and [2]rotaxanes: tuning the switching kinetics and metastability

Hydrogen bonded arylamide foldamers have been introduced in switchable pseudo[2]rotaxanes and [2]rotaxanes, which also include a cyclobisparaquat(p-phenylene) (CBPQT⁴⁺) ring and a ‘dumbbell’ containing tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP, for rotaxanes). The foldamer size changes through folding and unfolding serve as a steric handle to modulate the mechanical movement of the CBPQT⁴⁺ ring along the dumbbell of the pseudo[2]rotaxanes and [2]rotaxanes. By varying the number of the repeating units in the foldamer, the kinetics of the solvent-dependent slippage/deslippage of pseudo[2]rotaxanes and the switching of the ring between TTF and DNP of the [2]rotoxanes can be tuned remarkably, with the time scope ranging from several minutes to several days, in twelve solvents of varying polarity, which have been confirmed by the ¹H NMR, UV–vis spectroscopy, and cyclic voltammogram experiments.     

A comparison of sequential extraction techniques for determining arsenic fractionation in synthetic mineral mixtures

The sequential extraction methods according to Tessier et al. [1], Borovec et al. [2], Zhang and Moore [3] and Hall et al. [4] have been tested for their suitability for arsenic fractionation in samples of artificially prepared mineral mixtures. Mixtures containing different amounts of As-containing phases were prepared so that their compositions corresponded to weathering products on As-bearing ore deposits. A comparison of different procedures on simple mineral mixtures containing calcium arsenate (CaHAsO₄·H₂O), As-bearing goethite (FeOOH) and arsenopyrite (FeAsS) showed that only the results of the Hall method satisfactorily correspond to the expected arsenic distribution. A detailed verification of the Hall method was subsequently carried out on most complex synthetic mineral mixtures with varying amounts of As-containing kaolinite and carbonate, calcium arsenate, As-bearing goethite and arsenopyrite. The results confirm that the Hall method cannot be fully employed for an accurate As speciation but may be applied for a route identification of As distribution between "labile", "medium-labile" and "residual" forms in heavily polluted soils.     

Novel Cesium‐Selective Electrodes Based on Lipophilic 1,3‐Bisbridged Cofacial‐calix[6]crowns

Five bisbridged calix[6]crowns have been investigated as Cs⁺ ionophore in PVC membrane electrodes. As ionophores, three 1,3‐bisbridged calix[6]crown‐4‐ethers( I–III ), 1,3‐bisbridged calix[6]crown‐5‐ether( IV ), and 1,3‐bisbridged calix[6]crown‐6‐ether( V ) have been evaluated. The membranes all give good Nernstian response in the concentration range from 1×10^?7 to 1×10^?1 M of cesium ion. The best detection limits (?log aequation/tex2gif-inf-1.gif=7.08–7.36) are obtained for electrode membranes containing 1,3‐bisbridged cofacial‐calix[6]crown‐4‐ethers( I‐III ), and the values are the lowest compared with those reported previously. The highest selectivity coefficients [ 3.74(Cs/K), 2.63(Cs/Rb)] are obtained for the membrane of 1,3‐bisbridged calix[6]crown‐4‐ether( II ), and these values are also the highest compared with previous reports for Cs⁺‐ISEs. The highest selectivity towards cesium ion is attributed to the geometrically cofacial positions of two crown‐ethers in calix[6]crowns in order to provide the complex of cesium ion and eight oxygens of cofacial crowns.     

Synthesis and Evaluation of Bioactivity of Thiazolo[3,2‐b]‐[1,2,4]‐triazoles and Isomeric Thiazolo[2,3‐c]‐[1,2,4]‐triazoles

Synthesis of 2‐(o‐nitrophenyl)‐6‐arylthiazolo[3,2‐b]‐[1,2,4]‐triazoles 4 and its isomer 3‐(o‐nitrophenyl)‐5‐arylthiazolo[2,3‐c]‐[1,2,4]‐triazoles 6 has been achieved starting from the appropriate 1‐(o‐nitrobenzoyl)‐3‐thiosemicarbazide 1 . Compound 1 on condensation with α‐haloketones gives 2‐(o‐nitrobenzoyl)hydrazino‐4‐arylthiazole hydrobromide 5 , which, on cyclization with POCl₃, affords thiazolo[3,2‐b]‐[1,2,4]‐triazoles 6 and not the isomeric thiazolo[3,2‐b]‐[1,2,4]‐triazoles 4 . This has been established by an unequivocal synthesis of 4 through polyphosphoric acid cyclization of 5‐aroylmethylmercapto‐3‐o‐nitrophenyl‐[1,2,4]‐triazole 3 . Compound 3 was synthesized by condensation of α‐haloketones with 5‐mercapto‐3‐(o‐nitrophenyl)‐[1,2,4]‐triazole 2 , obtained cyclization of 2‐(o‐nitrobenzoyl)hydrazinecarbothioamide 1 with NaOH. The antibacterial and antifungal activities of some of the compounds have also been evaluated.     

Enantioselective Synthesis of [9]‐ and [11]Helicene‐like Molecules: Double Intramolecular [2+2+2] Cycloaddition

The enantioselective synthesis of completely ortho‐fused [9]‐ and [11]helicene‐like molecules has been achieved through a rhodium‐mediated, intramolecular, double [2+2+2] cycloaddition of phenol‐ or 2‐naphthol‐linked hexaynes. Crystal structures and photophysical properties of these [9]‐ and [11]helicene‐like molecules have also been disclosed.     

Three‐Component Reaction for Construction of Spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and Spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines]

The three‐component reaction of thiazole (benzothiazole), dialkyl but‐2‐ynedioate, and isatinylidene malononitriles in toluene at 110–120°C in a sealed tube afforded a mixture of cis/trans‐isomers of functionalized diastereoisomeric spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines] in good yields. Both cis‐isomers and trans‐isomers were successfully separated out and fully characterized with spectroscopy and single crystal determination. Under similar conditions, the three‐component reaction containing 2‐(1,3‐dioxo‐1H‐inden‐2(3H)‐ylidene)malononitrile resulted in spiro[indene‐2,7′‐thiazolo[3,2‐a]pyridine] derivatives.     

Low temperature 13C NMR magnetic resonance in solids 4. Cyclopropane,bicyclo[1.1.0]butane and [1.1.1] propellane

The solid state ¹³C NMR spectra of bicyclo[1.1.0]butane and [1.1.1]propellane have been measured at low temperature. The orientation of the principal axes of the chemical shielding tensor have been determined with ab initio calculations based on the IGLO (Individual Gauge for Localized Orbitals) method when they are not determined by symmetry. Excellent agreement is obtained between the calculated and experimental principal values of the shielding tensor when basis sets containing polarization functions are used. In most cases the agreement is such that the calculated values are within the experimental error.Part 3 of this series: Ref. [7]     

5-Nitro[2.2]paracyclophanepyran-6-one—building block for the synthesis of [2.2]paracyclophanes containing condensed benzofuran subunits

The 5-nitro[2.2]paracyclophanepyran-6-one 2 has been synthesized. DBN treatment of the Diels-Alder cycloadducts of 2 followed by DDQ oxidation unexpectedly led to [2.2]paracyclophanes containing a condensed benzofuran subunit.