Synthesis and thermal properties of poly(cycloalkyl methacrylate)s bearing bridged- and fused-ring structures

Radical polymerizations of some cycloalkyl methacrylates bearing bridged- and fused-ring structures, i.e., bornyl methacrylate (BoMA), isobornyl methacrylate (IBoMA), 2-decahydronaphthyl methacrylate (DNMA), and 3-tetracyclo [4.4.0^2,5.1^7,10] dodecyl methacrylate (TCDMA), were carried out. The radical polymerization reactivities of these monomers depended on the structure of the cycloalkyl ester groups in the following order: TCDMA > BoMA > DNMA > CHMA > IBoMA > MMA, where CHMA and MMA are cyclohexyl and methyl methacrylates, respectively. The propagation and termination rate constants of these monomers were evaluated from the polymer radical concentration determined by electron spin resonance spectroscopy. The solubilities and microstructures of the resulting polymers were examined. Thermal properties, i.e., glass transition temperatures and decomposition behaviors, of the polymers were also investigated and related to the structures of the polymer side chain. © 1993 John Wiley & Sons, Inc.     

Photopolymerization of methyl methacrylate using dimethylaniline-nitrobenzene complex as the photoinitiator

Photopolymerization of methyl methacrylate was studied at 40° using dimethylaniline (DMA)—nitrobenzene (NB) C.T. complex as photoinitiator. R_p is proportional to ([DMA] [NB])^0.24 and [M]^1.0. Initiation of polymerization takes place through radicals generated by photodecomposition of DMA—NB complex formed in situ. Evidence for incorporation of N-methylanilonomethyl end-groups in the polymers was obtained by u.v. spectral analysis. The nonideal kinetics are explained in terms of significant participation of the initiating species in chain termination via degradative chain transfer.     

Controlled polymerization of methacrylates at ambient temperature using trithiocarbonate chain transfer agents via SET‐RAFT–cyclohexyl methacrylate: A model study

Controlled radical polymerization of cyclohexyl methacrylate (CHMA), at ambient temperature, using various chain transfer agents (CTAs) is successfully demonstrated via single electron transfer‐radical addition fragmentation chain transfer (SET‐RAFT). Well‐controlled polymerization with narrow molecular weight distribution (M_w/M_n) < 1.25 was achieved. The polymerization rate followed first‐order kinetics with respect to monomer conversion, and the molecular weight of the polymer increased linearly up to high conversion. A novel, fluorescein‐based initiator, a novel fluorescent CTA and two other CTAs comprising of butane thiol trithiocarbonate with cyano (CTA 1) and carboxylic acid (CTA 3) as the end group were synthesized and characterized. The polymerization is observed to be uncontrolled under SET and less controlled under atom transfer radical polymerization (ATRP) condition. CTA 2 and 3 produces better control in propagation compared with CTA 1, which may be attributed to the presence of R group that undergoes ready fragmentation to radicals, at ambient temperature. The poly(cyclohexyl methacrylate) [P(CHMA)] prepared through ATRP have higher fluorescence intensity compared with those from SET‐RAFT, which may be attributed to the quenching of fluorescence by the trithiocarbonate and the long hydrocarbon chain. It is observed that block copolymers P(CHMA‐b‐t‐BMA) produced from P(CHMA) macroinitiators synthesized via SET‐RAFT result in lower polydispersity index in comparison with those synthesized via ATRP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The termination reaction in free radical copolymerization. I. Methyl methacrylate and butyl- or dodecyl methacrylate

Using a spatially intermittent reactor, the absolute rate constant for the termination reaction in free radical copolymerization has been measured for the monomer pair methyl methacrylate (MMA)–butyl methacrylate (BMA). For the pair MMA–dodecyl methacrylate (DMA) the relative rate constant for termination has been measured. In both cases the termination rate constant was a monotonically changing function of the monomer feed composition. This function can be well approximated by a simple calculation of the enchained monomer units' contributions to the average segmental friction coefficient of the copolymer chain. An attempt to apply a previously derived theoretical treatment based on penultimate unit effects produced physically unrealistic results.     

Comparative studies of the effects of dimethylaniline,methylaniline and aniline in the benzophenonesensitized photopolymerization of methyl methacrylate in bulk and in solution

Comparative studies of the photopolymerization of methyl methacrylate (MMA) at 35 using benzophenone (BP) as sensitizer in combination with dimethylaniline (DMA), methylaniline (MA) or aniline (A) are reported. In each case the initiator exponent is appreciably less than 0.5. Considering rates of polymerization, inhibition periods and apparent activation energy, the relative effectiveness of the amines in photopolymerization is DMA > MA > A. Solvent effects are also different in the 3 amine systems. In each case photoreduction of BP by the amine, through formation of the BP'-amine exciplex, leads to generation of an amine radical and the semipinacol radical, the former acting as an initiator and the latter as a terminator (primary radical termination). Kinetic analysis indicates that the rate constants of initiation, k_c for the amine radicals lie in the order DMA radical > MA radical > A radical.     

Spectroscopic and photopolymerization studies of benzyl methacrylate/poly(benzyl methacrylate) two‐component system

The influence of the viscosity of a two‐component system on its molecular dynamics (on the basis of hypersonic wave velocity and attenuation coefficient) and photopolymerization kinetics was studied. The system investigated represented the solution of poly(benzyl methacrylate), PBzMA (MW = 70000) in its monomer, benzyl methacrylate (BzMA). The viscosity of the system was varied by adding various amounts of the polymer to the monomer (10–50 wt %). The molecular dynamics in the neat BzMA was studied by the proton Nuclear Magnetic Resonance (NMR) spin‐lattice relaxation time measurements and the wide‐line ¹H NMR spectroscopy in a wide range of temperature. Information on the local dynamics in liquid BzMA above its melting temperature was gained from the high‐resolution ¹H and ¹³C NMR spectra. The hypersonic wave velocity and the attenuation coefficient were investigated in the appropriate temperature range related to a viscoelastic relaxation process by the Brillouin light scattering method. The kinetic measurements have demonstrated that the photopolymerization rate rapidly increases and the monomer conversion decreases with increasing polymer‐to‐monomer ratio; this effect has been noted in the whole range of polymer concentration and reaction temperature studied. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1336–1348, 2010     

Miscibility of polycarbonates with copolymers containing cyclohexylmethacrylate

We prepared various copolymers containing styrene and methacrylates to examine their miscibility with polycarbonates such as bisphenol A polycarbonate (PC), dimethylpolycarbonate (DMPC), and tetramethylpolycarbonate (TMPC). Among the various copolymers examined, poly(methyl methacrylate‐co‐cyclohexylmethacrylate) [P(MMA–CHMA)] copolymers containing proper amounts of cyclohexylmethacrylate (CHMA) formed miscible blends with PC and DMPC, whereas TMPC did not form a miscible blend with P(MMA–CHMA). However, TMPC was miscible with poly(styrene‐co‐cyclohexylmethacrylate) [P(S–CHMA)] copolymers containing less than about 40 wt % CHMA, whereas PC and DMPC were always immiscible with P(S–CHMA). Miscible blends exhibited lower critical solution temperature (LCST)‐type phase behavior. Binary interaction energies were calculated from the observed phase boundaries with lattice–fluid theory combined with a binary interaction model. The quantitative interaction energy of each binary pair indicated that the phenyl ring substitution of polycarbonate with methyl groups did not lead to interactions that were favorable for miscibility with methyl methacrylate (MMA) and CHMA, but it did lead to favorable interactions with styrene. The addition of CHMA to MMA initially increased the LCST but ultimately led to immiscibility with PC and DMPC; however, addition of CHMA to styrene always decreased the LCST with TMPC. The increased LCST of PC or DMPC blends stemmed from intramolecular repulsion between MMA and CHMA, whereas the decreased LCST of TMPC/P(S–CHMA) blends with CHMA content came from negative interaction energy between styrene and CHMA. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1948–1955, 2001     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Photopolymers (I): photoinitiating role of monochloroacetic acid in the synthesis of poly(methyl methacrylate)

Photopolymerization of methyl methacrylate in bulk and in solution at 40 °C using monochloroacetic acid –dimethyl aniline (MCAA–DMA) combination as photoinitiator was studied kinetically. The apparent activation energy was found to be 4.39 kcal/mol (18.37 kJ/mol) while the kinetic parameter k_p²/k_t was 1.27 × 10⁻² 1/mol/sec. The kinetic data indicated that polymerization followed a radical mechanism. The initiator order was found to be 0.25, indicating significant deviation from the square root dependence for normal free radical kinetics. The non‐ideality in the kinetics can be explained on the basis of significant initiator‐dependent termination through primary radicals or degradative initiator transfer. The observed monomer order was significantly less than unity (i.e. nonideal behavior) for use of carbon tetrachloride, chloroform, methylethyl ketone and acetic acid as diluents, but it was unity (i.e. ideal behavior) for use of benzene as the diluent. Solvents other than benzene contributed to enhancement of rate of polymerization by influencing the radical generation step. End‐group analysis indicated the incorporation of DMA and MCAA moieties as end‐groups in the polymers. Copyright © 1999 John Wiley & Sons, Ltd.     

Atom transfer radical polymerization of cyclohexyl methacrylate at a low temperature

The atom transfer radical polymerization of cyclohexyl methacrylate (CHMA) is reported. Controlled polymerizations were performed with the CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalytic system with ethyl 2‐bromoisobutyrate as the initiator in bulk and different solvents (25 vol %) at 40 °C. The polymerization of CHMA in bulk resulted in a controlled polymerization, although the concentration of active species was relatively elevated. The addition of a solvent was necessary to reduce the polymerization rate, which was dependent on the dipole moment. Well‐controlled polymers were obtained in toluene, diphenyl ether, and benzonitrile solutions. Poly(cyclohexyl methacrylate) as a macroinitiator was used to synthesize the poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) block copolymer, which allowed a demonstration of its living character. In addition, two difunctional initiators, 1,4‐bis(bromoisobutyryloxy) benzene and 1,2‐bis(bromoisobutyryloxy) ethane, were used to initiate the atom transfer radical polymerization of CHMA. The experimental molecular weights of the obtained polymers were very close to the theoretical ones. These, along with the relative narrow molecular weight distributions, indicated that the polymerization was living and controlled. For confirmation, two different poly(tert‐butyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) triblock copolymers were also synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 71–77, 2005     

Grafting of Vinyl Monomers onto Poly(Acryloyl-L-valine) Microspheres Containing Peroxyester Groups

Abstract

Poly(acryloyl-L-valine) microspheres containing peroxyester groups were prepared by copolymerization of acryloyl-L-valine with di-t-butyl peroxyfumarate in acetophenone. Graft copolymerization of some vinyl monomers onto the microspheres was carried out by photolysis or thermolysis of the peroxyester groups in the microspheres. When benzyl methacrylate (BzMA) was used as the second monomer, BzMA conversion and grafting efficiency were found to increase with time. This might be ascribed to long lifetime of the polymer radicals in the microspheres. In fact, the very stable propagating radical of BzMA was observed by ESR in the photoinduced graft copolymerization system of the microspheres and BzMA at room temperature. The copolymerization process was investigated by ESR.     

Kinetics of emulsion polymerization of methyl methacrylate

The kinetics of the emulsion polymerization of methyl methacrylate at 50°C have been studied in seeded systems using both chemical initiation and γ-radiolysis initiation. Both steady-state rates and (for γ-radiolysis) the relaxation from the steady state were observed. The average number of free radicals per particle was quite high (e.g., ～0.7 for 10^?3 mol dm^?3 S₂O²₈ initiator). The data are quantitatively interpreted using a generalized Smith–Ewart–Harkins model, allowing for free radical entry, exit, biomolecular termination within the latex particles, and aqueous phase hetero-termination and re-entry. From this treatment, there results (i) the dependence of the termination rate coefficient (k_t) on the weight fraction of polymer (w_p), (ii) lower bounds for the dependence of the entry rate coefficient on initiator concentration, and (iii) the conclusion that most exited free radicals undergo subsequent re-entry into particles rather than hetero-termination. The results for k_t(w_p) are consistent with diffusion control at temperatures below the glass transition point. Comparisons are presented of the behavior of methyl methacrylate, butyl methacrylate, and styrene in emulsion polymerization systems.     

Photopolymerization of methyl methaerylate initiated by benzil in non-aqueous media

Summary Kinetics of polymerization of methyl methacrylate initiated by photolysis of benzil with 420 nm radiation, have been investigated at 35 °C. The rate of monomer disappearance has been followed gravimetrically and the chain-length of the polymer formed, measured by viscometry. The dependence of the rate of polymerization and quantum yield of monomer conversion on the concentrations of the monomer and the initiator, absorbed light-intensity etc. has been studied in detail. A kinetic scheme has been proposed in the light of experimental results, involving i) a primary photochemical act of excitation of the sensitizer producing free radicals by hydrogen abstraction, ii) initiation of polymerization by free radicals generated and iii) termination of the active chain by mutual combination involving either coupling or disproportionation.With 3 figures and 2 tables     

Benzophenone-sensitized photopolymerization of methyl methacrylate using dimethyl aniline–maleic acid combination as photoinitiator

Benzophenone (BP)-sensitized photopolymerization of methyl methacrylate (MMA) in near UV/visible light was studied at 40°C using dimethylaniline maleic acid (DMA—MA) combination as the photoinitiator. An instantaneous 1:1 complexation between DMA and MA takes place when they are mixed together in acetonitrile. Also, instantaneous complex formation occurs between DMA and MMA and between MA and MMA when they are dissolved in MMA in low concentrations, separately. Interestingly, when equimolar proportions of DMA and MA are mixed together in MMA, there is indication for further instantaneous complexation between (DMA—MMA) complex and (MA—MMA) complex forming the actual initiating species in the photopolymerization system. Initiator exponent was 0.28 and monomer exponent varied between 0.0 to 1.8 depending on the nature of the solvent and range of dilution used. Analysis of kinetic data indicates a free radical mechanism for the polymerization with initiator-dependent termination. Chain termination via degradative initiator transfer is quite significant; but the degradative effect becomes much less prominent in the higher range of initiator concentration indicating that the reinitiation reaction following the initiator transfer process assumes more proportionate significance as the initiator concentration is increased, probably as a result of higher reinitiation efficiency. Polymers obtained gave evidence for the incorporation of aromatic (amine) end groups in them.     

Photopolymerization of methyl methacrylate using benzophenone-dimethylaniline combination as photoinitiator

Photopolymerization of MMA at 35° was studied using benzophenone (BP)-dimethylaniline (DMA) combination as photo-redox initiator. Initiator exponent was 0.13; monomer exponent was < 1.0 in chlorinated solvents and > 1.0 in other solvents. Photoreduction of BP by DMA is considered to produce chain-initiating radicals and analysis of kinetic data indicates this process to be solvent and monomer dependent. Chlorinated solvents are indicated to be much more reactive than other solvents. The photopolymerization is also characterized by significant primary radical termination.     

Ferrocene-containing polymers. I. Radiation-induced polymerization of ferrocenylmethyl methacrylate

γ-Ray-induced polymerizations of ferrocenylmethyl methacrylate (FMMA) in crystalline and amorphous states were investigated with kinetical and ESR methods. In the crystalline state the polymerization of FMMA proceeded slowly and gave low-molecular-weight polymers, whereas in the amorphous state it proceeded rapidly and gave polymers of much higher molecular weight. Molecular weight distributions of these polymers were binodal. The temperature dependence and the dose-rate dependence of the polymerization rates were different between the two states. Wide-line nuclear magnetic resonance (NMR) spectra of the amorphous monomer suggested that the polymerization proceeded in a supercooled state. Electron spin resonance (ESR) spectra of γ-irradiated FMMA and 1,1′-ferrocenyl-di(methyl methacrylate) showed that ferrocene radicals and methacrylic radicals were formed simultaneously at low temperature; with increasing temperature the former radicals disappeared, whereas the latter changed into growing chain radicals. The yields of radicals were relatively low; this means that ferrocene groups in the monomers behave as a radiation energy absorber.     

Chain-length dependent termination in pulsed-laser polymerization, 6. The evaluation of the rate coefficient of bimolecular termination kt for the reference system methyl methacrylate in bulk at 25°C

The values for the rate coefficient of chain termination k_t in the bulk polymerization of methyl methacrylate at 25°C were formally calculated (i) from the second moment of the chain-length distribution and (ii) from the rate equation for laser-initiated pseudostationary polymerization (both expressions were originally derived for chain-length independent termination) by inserting the appropriate experimental data including the rate constant of chain propagation k_p. These values were treated as average values, k and k , respectively. They exhibited good mutual agreement, even the predicted gradation (k < k by about 20%) was recovered. The log-log plot of k_t vs. the average degree of polymerization of the chains at the moment of their termination v′ yielded exponents b of 0.16–0.17 in the power-law k _t = A · v′^−b, A ranging from 1.1 × 10⁸ to 1.3 × 10⁸ (L · mol⁻¹ · s⁻¹). A 70% contribution of disproportionation to overall termination has been assumed in the calculations.     

Mode of termination in the copolymerization of vinyl acetate–isobutyl methacrylate and methyl methacrylate–methyl acrylate at 60°C

The mode of termination in the vinyl acetate–isobutyl methacrylate (VA–IBMA) and methyl methacrylate–methyl acrylate (MMA–MA) copolymerization systems has been investigated at 60°C. by using the dye-interaction technique for functional endgroup estimation. The results show that pairs of poly(vinyl acetate) radicals interact almost exclusively through a disproportionation mechanism. In the homopolymerization of methyl methacrylate and methyl acrylate, about 1.16 and 1.22 carboxyl-containing endgroups per polymer molecule have been estimated, which shows the predominance of disproportionation over combination in these termination reactions. In poly(isobutyl methacrylate) about 1.55 tagged initiator fragments per chain indicate that 29% of the total radicals terminate through the disproportionation mechanism. Cross termination in the (VA–IBMA) copolymerization system occurs almost entirely through combination for monomer feeds richer in isobutyl methacrylate content while for the MMA–MA system, combination is more important at intermediate monomer feed ratios. These results have been discussed in the light of different explanations for the reaction mechanism.     

Chain-length dependent termination in pulsed-laser polymerization, 2. On the prospects of determining the bimolecular termination constant kt from the second moment of the chain-length distribution

The correct (event weighted) average of k_t, 〈k_t〉, has been calculated for pseudostationary laser-induced polymerization for a kinetic scheme with chain-length dependent termination and compared to the average k̄_t obtained by formally solving for k_t the expression for the second moment of the chain-length distribution valid for chain-length independent termination (represented by the product of rate of polymerization ν_p and weight average degree of polymerization P̄_w). It is shown that there is a fair agreement between the two quantities. This may be used to recover experimentally the power-law governing the dependence of k_t on chain-length, especially its exponent.     

Photopolymerization of Methyl Methacrylate Using the Benzil-Dimethylaniline Combination as the Photoinitiator

Benzil (BZL)-dimethylaniline (DMA) exciplex interaction has been utilized to initiate the photopolymerization of methyl methacrylate at 40°C in bulk and in solution. Depending on the nature of the solvent used, the monomer exponent values varied between 0.47 to 2.76. Initiator exponent values were found to be 0.29 and 0.15 with respect to [BZL] and [DMA], respectively. A low value of k_p ²/k_t and the high initiator transfer constant values indicated significant initiator-dependent termination. The semipinacol radical formed during irradiation is thought to be mainly responsible for primary radical termination while the generated ion radicals are presumed to participate in degradative initiator transfer.