Reference materials for PAHs in foodstuffs: Results of the certification exercise of two coconut oil reference materials

This certification exercise was the final stage of a stepwise interlaboratory study approach, organized within the SMT-program of the EC, for the development of certified reference materials (CRMs) for the determination of PAHs in foodstuffs. The certification exercise was carried out by thirteen European laboratories using a variety of extraction and clean-up procedures and different analytical procedures. Two different coconut oil materials were certified for their mass fractions of six selected PAHs.     

Homogeneity testing of reference materials

 Homogeneity testing is of the highest importance for the certification of reference materials, as it should demonstrate the validity of the certified values and their uncertainties in the analysis of individual units or portions thereof. However, the conclusions drawn from the results of these studies may often be questioned. It is proposed to improve this situation by quantifying the effect of homogeneity studies in terms of their impact on the uncertainty of certified values. Here it should be noted that the between-units variability directly affects the certified uncertainty, whereas the within-unit inhomogeneity only defines the minimum representative test portion. Received: 18 September 1997 · Accepted: 21 November 1997     

Quantification of the expected shelf-life of certified reference materials

Stability testing and -monitoring are of the highest importance for the certification of reference materials. However, in general the results of these measurements are only assessed in a qualitative way, and no effort is made to quantify the period of certification or the shelf-life of the CRM. However, the revised ISO Guide 31 “Contents of Certificates, Certification Reports and Labels of Reference Materials” will most probably contain the explicite obligation to mention an expiry date “for all CRMs where instability has been demonstrated or is considered possible”. Therefore a method is proposed for quantifying the expected shelf-life on the basis of linear regression and determination of the intersection of the lower confidence limit of the certified value with the 95% lower confidence bound of the mean degradation curve. Received: 18 September 1997 / Revised: 26 November 1997 / Accepted: 24 December 1997     

Production and certification of environmental reference materials in Romania

Preparation techniques for single-element and multielement standard solutions, with special emphasis on the potential progress in this field are presented. A short review of locally available reference materials is given. Some aspects of the experience accumulated in Romania regarding the various certification approaches of reference materials are presented and the main characteristics of these certified reference materials are listed. Received: 23 May 1997 / Revised: 15 August 1997 / Accepted: 15 August 1997     

The interpretation and use of stability data in the certification of reference materials

 Stability tests are carried out on candidate reference materials in order to ascertain that the certification values continue to be valid a reasonable time after completion of the certification analysis. These tests are also used for recommending storage conditions, as well as the duration of storage before certification values need be rechecked. BCR (Community Bureau of Reference) reference materials do not normally have an expiry date, but rely on stability monitoring throughout the lifetime of the certified material. The 1997 version of the BCR Guidelines for the production and certification of reference materials does, however, take into account the necessity of limiting the validity of a certification, when degradation of the material during storage cannot be ignored. This paper discusses an example of significant degradation taking place between the time of completion of the certification analysis and the issue of a formal certificate. Various options are presented together with an account of their influence on the certified values and their uncertainties. Received: 3 October 1997 · Accepted: 3 November 1997     

Standard reference materials (SRMs) for determination of organic contaminants in environmental samples

For the past 25 years the National Institute of Standards and Technology (NIST) has developed certified reference materials (CRMs), known as standard reference materials (SRMs), for determination of organic contaminants in environmental matrices. Assignment of certified concentrations has usually been based on combining results from two or more independent analytical methods. The first-generation environmental-matrix SRMs were issued with certified concentrations for a limited number (5 to 10) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Improvements in the analytical certification approach significantly expanded the number and classes of contaminants determined. Environmental-matrix SRMs currently available include air and diesel particulate matter, coal tar, marine and river sediment, mussel tissue, fish oil and tissue, and human serum, with concentrations typically assigned for 50 to 90 organic contaminants, for example PAHs, nitro-substituted PAHs, PCBs, chlorinated pesticides, and polybrominated diphenyl ethers (PBDEs). Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Development of reference materials for paralytic shellfish poisoning toxins

A project was undertaken to develop mussel reference materials that were certified for their mass fractions of saxitoxin and decarbamoyl-saxitoxin. Fifteen laboratories from various European countries participated. Three of these had major responsibility for substantial parts of the work and overall coordination of the project. The project involved 4 main activities: (1) procurement and characterization of calibrants; (2) improvement of analytical methodology; (3) preparation of reference materials, including homogeneity and stability studies; (4) 2 interlaboratory studies and a certification exercise. The joint activities resulted in 3 homogeneous and stable reference materials: 2 lyophilized mussel materials with and without naturally incurred paralytic shellfish poisoning (PSP) toxins, and a saxitoxin enrichment solution. The reference materials were certified with respect to their saxitoxin and decarbamoyl-saxitoxin content. The lyophilized mussel material with PSP toxins (CRM 542) contained <0.07 mg saxitoxin x 2HCl/kg and 1.59 +/- 0.20 mg decarbamoyl-saxitoxin x 2HCl/kg. The lyophilized mussel material without PSP toxins (CRM 543) contained <0.07 mg saxitoxin x 2HCl/kg and <0.04 mg decarbamoyl-saxitoxin x 2HCl/kg. The certified value of the saxitoxin mass fraction in the saxitoxin enrichment solution (CRM 663) was 9.8 +/- 1.2 microg/g.     

Analysis of urban particulate standard reference materials for the determination of chlorinated organic contaminants and additional chemical and physical properties

A previously issued National Institute of Standards and Technology (NIST) Standard Reference Material (SRM), SRM 1649, Urban Dust/Organics has been analyzed for chlorinated organic contaminants (polychlorinated biphenyls and chlorinated pesticides) to provide certified values for a new class of compounds relative to the former certification. The material will be reissued as SRM 1649a. Four different analytical techniques were used. Specifically, two different methods of extraction (Soxhlet and pressurized fluid extraction) were used in conjunction with sample analysis by gas chromatography with two different columns (5% phenyl-methyl polysiloxane and 50% methyl C-18 dimethyl polysiloxane) that exhibit distinct selectivity, and with two different modes of detection (electron capture detection and mass spectrometry). The results from these techniques were combined to generate certified concentrations for 35 PCB congeners (some in combination) and 8 chlorinated pesticides. Ancillary assessments of additional chemical and physical properties of SRM 1649a include homogeneity, moisture, total organic carbon, extractable mass, and the particle-size distribution. The approach and the results for the certification of the PCB congeners and chlorinated pesticides in SRM 1649a, and the determination of the additional chemical and physical properties are described. In addition, the determination of PCBs and chlorinated pesticides in SRM 1648, Urban Particulate Matter (a particulate material certified for inorganic constituents), is also discussed although certified values are not presented. Received: 8 June 1998 / Revised: 4 September 1998 / Accepted: 26 September 1998     

Analysis of urban particulate standard reference materials for the determination of chlorinated organic contaminants and additional chemical and physical properties

A previously issued National Institute of Standards and Technology (NIST) Standard Reference Material (SRM), SRM 1649, Urban Dust/Organics has been analyzed for chlorinated organic contaminants (polychlorinated biphenyls and chlorinated pesticides) to provide certified values for a new class of compounds relative to the former certification. The material will be reissued as SRM 1649a. Four different analytical techniques were used. Specifically, two different methods of extraction (Soxhlet and pressurized fluid extraction) were used in conjunction with sample analysis by gas chromatography with two different columns (5% phenyl-methyl polysiloxane and 50% methyl C-18 dimethyl polysiloxane) that exhibit distinct selectivity, and with two different modes of detection (electron capture detection and mass spectrometry). The results from these techniques were combined to generate certified concentrations for 35 PCB congeners (some in combination) and 8 chlorinated pesticides. Ancillary assessments of additional chemical and physical properties of SRM 1649a include homogeneity, moisture, total organic carbon, extractable mass, and the particle-size distribution. The approach and the results for the certification of the PCB congeners and chlorinated pesticides in SRM 1649a, and the determination of the additional chemical and physical properties are described. In addition, the determination of PCBs and chlorinated pesticides in SRM 1648, Urban Particulate Matter (a particulate material certified for inorganic constituents), is also discussed although certified values are not presented. Received: 8 June 1998 / Revised: 4 September 1998 / Accepted: 26 September 1998     

Development and certification of reference materials for residues of organochlorine and organophosphorus pesticides in beef fat ACSL CRM 1 and 2

Beef fat samples were prepared and tested as candidate reference materials for organochlorine and organophosphorus pesticides. The CRMs consisted of beef fat spiked with pesticide solutions. One sample (ACSL CRM 1) was prepared containing close to 0.2 mg/kg of each of the organochlorine pesticides dieldrin and heptachlor epoxide. A second sample (ACSL CRM 2) was prepared containing close to 0.8 mg/kg of each of the organophosphorus pesticides diazinon, chlorpyrifos and ethion. The spiking levels and homogeneity of the materials were verified. The coefficients of variation of 5 analyses carried out to test between-jar homogeneity for each reference material were dieldrin, 3.5%; heptachlor epoxide, 1.1%; diazinon, 2.1%; chlorpyrifos, 1.2% and ethion, 3.1%. No instability in any of these compounds was detected over a twelve month period. The candidate reference materials were found to be suitable for certification by interlaboratory testing. The certification process was based on a two-stage nested design described in ISO Guide 35. Analysis of results reported by collaborating laboratories provided an assessment of the homogeneity of the reference materials. The certified values together with their upper and lower 95% confidence limits are: ACSL CRM 1*Dieldrin*0.199 mg/kg **(0.188, **0.210 mg/kg) *Heptachlor epoxide*0.194 mg/kg **(0.176, **0.212 mg/kg) ACSL CRM 2*Diazinon*0.805 mg/kg **(0.755, **0.855 mg/kg) *Chlorpyrifos*0.790 mg/kg **(0.728, **0.852 mg/kg) *Ethion*0.813 mg/kg **(0.746, **0.879 mg/kg). A certificate for each material was prepared according to the guidelines set out in ISO Guide 31. Received: 25 April 1997 / Revised: 19 August 1997 / Accepted: 28 August 1997     

Certification of 22 elements in a pure copper (99.5%) sample for spark emission and X-ray fluorescence spectrometry (CRM BAM-376)

 The element contents of Ag, Al, As, Be, Bi, Cd, Co, Cr, Fe, Mg, Mn, Ni, P, Pb, S, Sb, Se, Sn, Te, Ti, Zn and Zr in a pure copper (99.5%) sample (CRM BAM-376) for use in spark emission and X-ray fluorescence spectrometry were certified and the certified values are given. For Si, the certification has not yet been completed, the content of this element will be certified later. The sample was produced and certified in collaboration with the Committee of Chemists of the GDMB Gesellschaft für Bergbau, Metallurgie, Rohstoff- und Umwelttechnik. Data of the homogeneity testing and the certification campaign with 14 participating laboratories using different analytical methods are reported. Received: 3 February 1997/Revised: 21 February 1997/Accepted: 5 March 1997     

Development of porous and dispersed CRM

Porous and finely dispersed certified reference materials (CRM) were certified using the gas adsorption method. The special certification procedure for IUPAC isotherm classification types I, II, and IV is presented for meso- and macroporous materials with special emphasis on specific surface area, specific pore volume and pore width according to standards DIN 66 131, 66 134, and 66 135. Four CRMs (SiO₂, α-Al₂O₃, two transition aluminas) with a macro- and mesopore range are presented. Certification was made on the basis of BCR guidelines in connection with interlaboratory tests (altogether 38 participating laboratories, 44 various gas adsorption apparatus). Received: 25 April 1997 / Revised: 22 August 1997 / Accepted: 28 August 1997     

Preparation and certification of two freshwater sediments certified reference materials for polycyclic aromatic hydrocarbons

Two freshwater sediments certified reference materials (CRMs) for 16 polycyclic aromatic hydrocarbons (PAHs) have been developed by the Institute for Environmental Reference Materials (IERM) of Ministry of Environmental Protection (MEP) in China. The methodology for preparing the CRMs of PAHs in sediments is described in this paper. The collected natural sediment samples were air-dried, ground, homogenised, packed, sterilised and tested on stability and homogeneity. Homogeneity results showed that the between-unit variation was confirmed to be below 4.5% for each compound. Stability was assessed after storage of samples for 16 months at temperature less than 30°C and in shade. The certification of the natural sediment matrix CRMs for PAHs was based on the agreement of results using different analytical techniques including gas chromatography/mass spectrometry (GC/MS) and reversed-phase liquid chromatography (LC) by no less than eight collaborating laboratories including IERM. Results of the homogeneity showed that the calculated u_bb′ was 0.9–2.5% for environmental river standard-4 (ERS-4) and 9–2.3% for environmental lake standard-1 (ELS-1), whereas stability results of total 16 PAHs indicated that the calculated u_rel,lts was 4.2% for ERS-4 and 2.2% for ELS-1. Certified values of 16 PAHs in ERS-4 varied from 8.5 to 167 μg/kg and ranged from 0.036 to 2.8 mg/kg in ELS-1.The good comparability, together with the independent confirmation of the assigned mass fraction by using different methods, confirmed that the CRMs are suitable for the method validation and quality control in soil or sediments analysis.     

Differential scanning calorimetry to measure the purity of polycyclic aromatic hydrocarbons

The application of differential scanning calorimetry (DSC) for purity determination is well documented in literature and is used amongst others in the analysis of pure organic crystalline compounds. The aim of this work is to examine whether the DSC method for purity determination consistently produces values for the purity of polycyclic aromatic hydrocarbons (PAHs) which are sufficiently accurate as required for the certification of reference materials. For this purpose, 34 different existing PAH certified reference materials were tested. The DSC results are shown to be consistent with the results obtained by other methods assessing the organic impurities content in PAHs, like gas chromatography (GC), high performance liquid chromatography (HPLC) and mass spectrometry. Significant differences between the measured values and the certified purity values were observed only in a limited number of cases.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Certification of reference materials for the quality control of major element determinations in groundwater Part 1: Feasibility study

 Analyses of groundwater are routinely performed by control laboratories within the European Union to monitor the levels of major elements. The quality control of such determinations requires the use of certified reference materials which are representative of natural samples. However, the preparation and stabilisation of natural groundwater for their major element composition is difficult to achieve and materials simulating the mean composition of real samples often represent the best alternative. In order to investigate the feasibility of preparation and stabilisation of simulated groundwater samples, various tests were necessary prior to the production of a large batch of candidate reference materials. This paper presents the preparation of simulated groundwater reference materials and the different stabilisation procedures tested. Received: 9 September 1996/Revised: 4 December 1996/Accepted: 14 December 1996     

Efficiency of decomposition procedures for the determination of some elements in soils by atomic spectroscopic methods

Nine decomposition procedures for soil samples, such as via acid mixtures and fusion in open systems and microwave and autoclave dissolution (in closed systems under elevated temperature and pressure) were assessed using certified soil reference materials. The determination of various elements in solutions was performed by FAAS and ICP-OES and the results were compared with certified values and with direct current arc OES analysis. Received: 3 March 1997 / Revised: 30 May 1997 / Accepted: 3 June 1997     

Feasibility studies for the preparation and certification of reference materials Part II: mineral oil contaminated waste materials

The 2-year international joint project HYCREF (Contract-No. G6RD-CT-2002-00854), funded by the European Commission in the 5th Framework programme, aimed to develop methods to prepare homogenous and stable water-, soil- and waste reference materials contaminated with mineral oil hydrocarbons and to test certify the mineral oil content by gas chromatographic methods. As mineral oil products are important sources for environmental contaminations, appropriate reference materials certified by using the new gas chromatographic methods (soil: ISO/FDIS 16703, waste: prEN 14039 and KW/04, water: ISO 9377-2) are highly needed. Additional to the HYCREF-results presented in part I–mineral contaminated soils–this second paper gives an overview of the feasibility study for the preparation and test certification of three waste reference materials (offshore marine sediment, building material and industrial waste). The following specifications, which had been defined in the project work plan, were reached successfully: uncertainty of the mineral oil content resulting from the certification exercise ≤5% and a between-bottle inhomogeneity of ≤3%. All three materials have been evaluated for long- and short term stability. They contain different levels and types of mineral oil and cover the full application range of ISO/FDIS 16703 and prEN 14039 (100–10,000 mg/kg). The expanded uncertainties U _cert of the three materials are about 6%. In this way, they are comparable to ERM^®-CC015a (U _cert=7.1%, mineral oil in a river sediment) and are suited to close the present gap of commercially available CRM for mineral oil determination in waste.     

Certified reference materials—Hay Powder (CRM 129) and Rye Grass (CRM 281)—for the quality control of analysis of animal feed

Analyses of nutritive elements are routinely performed in grass or hay for animal feed in order to improve the state of health and growth of domestic animals. To control the quality of such determinations, the Community Bureau of Reference (BCR) so far has produced two certified reference materials: Hay Powder (CRM 129) and Rye Grass (CRM 281). After a careful preparation procedure of the materials, a homogeneity study and a long-term stability study, the contents of the elements Ca, K, Mg, P, S, Zn, I, N and Kjeldahl-N were certified in CRM 129, whereas CRM 281 was certified for As, B, Cd, Cu, Hg, Mn, Mo, Ni, Pb, Sb, Se and Zn. This paper presents the certification exercise and especially concentrates on the elements I, B and Mo as examples of analytical work. Indicative values for Co, Cr, Fe, Cl and Na were also obtained.     

Reference materials and certified reference materials for spectrometry in Romania

Several reference materials (RMs) and certified reference materials (CRMs) are widely used in Romania as measurement standards in different spectrochemical measurements. Among them, single element standard solution certified for their mass concentration play a key role in ensuring the required traceability of results expressed in this measurement unit. A short review of the locally available elemental RMs and CRMs used in atomic spectrometry or in other analytical techniques where aqueous standard solutions are required (usually called RMs or CRMs for spectrometry) is given. The experience of the INM in preparation and certification of such materials is described. Some aspects regarding their use for ensuring the accuracy and for confirmation of the traceability of analytical measurements, especially through calibration and metrological validation of main instrument performances, are discussed.