Synthesis of triethoxysilanol

Triethoxysilanol was isolated for the first time by hydrolysis of chloro(triethoxy)silane in an organic solvent in the presence of a heterogeneous base and identified as an individual compound. The synthesis of this compound made it possible to study its physicochemical properties and substantially extended its potentialities for the synthesis of hyperbranched polyethoxysiloxanes and functional oligomers. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1309–1310, May, 2005.     

Preparation of polymethylsilsesquioxanes by the base‐catalyzed hydrolytic polycondensation of triisopropoxy(methyl)silane

Base‐catalyzed hydrolytic polycondensation of trialkoxymethylsilane was investigated to synthesize polymethylsilsesquioxanes (PMSs). The reaction of trimethoxy(methyl)silane and triethoxy(methyl)silane with tetramethylammonium hydroxide, tetrabutylammonium hydroxide, and also coline gave insoluble gels. Polymethylsilsesquioxane (PMS‐IP) was obtained by the reaction of triisopropoxy(methyl)silane (MTIPS) with tetrabutylammonium hydroxide as a catalyst. PMS‐IP was composed primarily of T² and T³ units. The percentage of T³ units and the molecular weight of PMS‐IP increased with increases in the molar ratios of catalyst and water to MTIPS and with the reaction time. PMS‐IP was soluble in organic solvents, except for methanol, and was separated by extraction with hexane and methanol into low‐ and high‐molecular‐weight fractions of M_w 2800–4000 and 7300–88,300, respectively. PMS‐IP coating films were prepared by dip coating on the organic, inorganic, and metal substrates, using the acetone–isopropyl alcohol solution of PMS‐IP. Since PMS‐IP solutions prepared with tetrabutylammonium hydroxide were hardly used because of the low content of hydroxy groups in the polymer, they showed low adhesion when compared with those solutions prepared with hydrochloric acid. The dielectric constant of the coating film prepared from the high‐molecular‐weight PMS‐IP was 2.6. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3623–3630, 2005     

Synthesis of bifunctional tetrakis(trimethylsilyl)silane derivatives

Bifunctional derivatives (XMe₂Si)₂Si(SiMe₃)₂ (X = H, Cl, or OH) were synthesized for the first time by the reaction of tetrakis(trimethylsilyl)silane with SbCl₅. The molecular and crystal structure of bis(hydroxydimethylsilyl)bis(trimethylsilyl)silane was established by X-ray diffraction. The fragmentation of the resulting compounds under electron impact was studied by mass spectrometry. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 461–466, March, 2006.     

Hydrolysis-Condensation Kinetics of Different Silane Coupling Agents

Abstract

The hydrolysis kinetics of 14 alkoxy silane coupling agents were carried out in an ethanol:water 80:20 (w/w) solution under acidic conditions and were monitored by ¹H, ¹³C, and ²⁹Si NMR spectroscopy. Acidic conditions were selected in order to enhance the silanol formation and to slow down the self-condensation between the resulting hydrolysed silanol groups. In situ ²⁹Si NMR spectroscopy allowed the determination of the intermediate species as a function of the reaction time. Thus, the following silane coupling agents were studied: 3-methacryloxypropyl trimethoxy silane (MPMS), 3-mercaptopropyl trimethoxy silane (MRPMS), 3-cyanopropyl triethoxy silane (CPES), triethoxy vinyl silane (VES), trimethoxy (2-phenylethyl) silane (PEMS), octyl triethoxy silane (OES), trimethoxy (7-octen-1-yl) silane (OEMS), 3-aminopropyl triethoxy silane (APES), 3-aminopropyl trimethoxy silane (APMS), 3-(2-aminoethylamino)propyl trimethoxy silane, (DAMS), 3-[2-(2-aminoethylamino)-ethylamino]propyl trimethoxy silane (TAMS), 4-amino-3,3-dibutyl trimethoxy silane (ADBMS), trimethoxy [3-(phenylamino)propyl] silane (PAPMS), and triethoxy-3-(2-imidazolin-1-yl) propyl silane (IZPES). A parameter quantifying the grafting potentiality of each silane coupling agent towards OH-rich solid substrates (such as cellulose) was established as a function of the nature of the alkoxy groups (methoxy or ethoxy), as well as that of the fourth substituent (vinyl, aminopropyl, etc.) of the silane studied.

GRAPHICAL ABSTRACT     

Synthesis and Crystal Structures of Antimony(III) Complexes With a Bis(amino)silane Ligand

Bis(amino)silane bearing bulky substituents on nitrogen, LH₂ [L = Me₂Si(NDipp)₂, Dipp = 2, 6‐diisopropylphenyl] was reacted with nBuLi (ratio 1:1 and 1:2) in toluene. The Me₂Si(LiNDipp)₂ was treated with SbCl₃ in a 1:1 ratio to yield the four‐membered SiN₂Sb ring compound of composition [η²(N,N)‐Me₂Si(NDipp)₂SbCl] ( 1 ). The mono lithiated bis(amino)silane was used to synthesize the monodentate heterotetraatomic complex [(η¹‐Me₂SiNDipp)NHDippSbCl₂] ( 2 ) by the reaction with SbCl₃. The complexes were characterized by ¹H and ¹³C NMR, elemental analysis, IR, and single‐crystal X‐ray structural analysis.     

1,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene: Regioselective ring opening of its α,β-epoxybis(silane) with some nucleophiles

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyllithium, (Me₃Si)₃CLi, in Et₂O gives disubstituted vinylbis(silane) 1 which reacts with MCPBA in CH₂Cl₂ at r.t. to afford mixture of mono and disubstituted epoxybis(silanes) 3 and 2. Vinylbis(silane) 1 can be completely converted into epoxybis(silane) 2 with an excess amount of MCPBA. The compound 2 was reacted with various reagents such as HX (X = Cl, Br), H₂SO₄, LiAlH₄ and MeLi/CuI and give the related products.     

Solvolysis–hydrolysis of N-bearing alkoxysilanes: Reactions studied with 29Si NMR

The hydrolysis reactions of 8 different N-bearing alkoxy-silane coupling agents, namely: 3-cyanopropyl triethoxy silane (CPES), triethoxy-3-(2-imidazolin-1-yl) propyl silane (IZPES), and amino silanes, 3-aminopropyl triethoxy silane (APES), 3-aminopropyl trimethoxy silane (APMS), 3-(2-aminoethylamino)propyl trimethoxysilane (DAMS), 3-[2-(2-aminoethylamino)ethylamino] propyl trimethoxysilane (TAMS), 4-amino-3,3-dibutyl trimethoxy silane (ADBMS) and trimethoxy [3-(phenylamino)propyl] silane (PAPMS) were carried out in ethanol/water 80/20 (w/w) solutions in acidic media and followed in situ by ¹H-, ¹³C- and ²⁹Si-NMR spectroscopy. Acidic conditions were selected in order to enhance the formation of silanol and to slow down the self condensation reactions of the hydrolyzed functions. ²⁹Si NMR spectroscopy revealed the formation of intermediate species, particularly the solvolysis of γ-amino silanes by reaction exchange with the alcoholic solvent.     

Cu(OAc)2-Catalyzed N-Arylation of Sulfonamides with Arylboronic Acids or Trimethoxy(phenyl)silane

Cu(OAc)₂-catalyzed C-N bond-formation reaction of sulfonamides with organoboronic acids or trimethoxy(phenyl)silane was achieved in the presence of 20 mol% of Cu(OAc)₂, providing N-arylation products with yields ranging from moderate to good.     

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

In this paper, nanoalumina (Al₂O₃) highly filled ethylene propylene diene monomer (EPDM) composites are prepared, and the mechanical (static and dynamic) properties and thermal conductivity are investigated systemically through various characterization methods. Furthermore, influences of in situ modification (mixing operation assisted by silane at high temperature for a certain time) with the silane‐coupling agent bis‐(3‐triethoxy silylpropyl)‐tetrasulfide (Si69) and stearic acid (SA) pretreatment on the nano‐Al₂O₃ filled composites are as well investigated. The results indicate that nano‐Al₂O₃ particles can not only perform well in reinforcing EPDM, but also improve the thermal conductivity significantly. Assisted by in situ modification with Si69, the mechanical properties (especially dynamic mechanical properties) of the nano‐Al₂O₃ filled composites are improved obviously, without influencing the thermal conductivity. By comparing to the traditional reinforcing fillers, such as carbon black (grade N330) and silica, in situ modified nano‐Al₂O₃ filled composites exhibit excellent performance in mechanical (static and dynamic) properties as well as better thermal conductivity, especially lower compression heat build‐up and better fatigue resistance. In general, our work indicates that nano‐Al₂O₃, as the novel thermal conductive reinforcing filler, is suitable to prepare rubber products serving in dynamic conditions, with the longer expected service life. Copyright © 2010 John Wiley & Sons, Ltd.     

Kinetic studies on the hydrosilylation of phenylacetylene with R3SiH (R3 = PhMe2, Ph2Me,Ph3, Et3) using bis(1,2‐diphenylphosphinoethane)norbornadiene rhodium(I) hexafluorophosphate as catalyst

Product distribution and kinetic studies on the hydrosilylation of phenylacetylene by Ph₃SiH, Ph₂MeSiH, PhMe₂SiH and Et₃SiH were performed using bis‐[1,2‐diphenylphosphinoethane]norbornadienerhodium(I) hexafluorophosphate, 1, as catalyst. Pre‐equilibration of the catalyst with the acetylene produced hydrosilylations, pre‐equilibration with the silane did not. The catalyst showed a pronounced selectivity for cis‐addition to form β‐products, t‐PhCH­CHSiR₃, unlike most hydrosilylation catalysts. The kinetic studies showed a hydrosilylation reaction that is zero order with respect to both acetylene and the silane, with a dependency upon catalyst concentration. The k_obs value is directly influenced by the substituents on the silane: k(PhMe₂SiH) > k (Et₃SiH > k (Ph₂MeSiH) > k (Ph₃SiH). Intercalation of the catalyst in hectorite was not useful, since either no reaction occurred in non‐polar solvents, or extraction of the catalyst occurred in polar solvents to produce the same product distributions. Copyright © 2000 John Wiley & Sons, Ltd.     

Time‐of‐flight SIMS characterization of hydrolysed organofunctional and non‐organofunctional silanes deposited on Al,Zn and Al–43.4Zn–1.6Si alloy‐coated steel

In this paper Al, Zn and Al–43.4Zn–1.6Si (AlZn) alloy‐coated steel have been treated with the organofunctional silane γ‐mercaptopropyltrimethoxysilane (γ‐MPS) and the non‐organofunctional silane 1,2‐bis(triethoxysilyl)ethane (BTSE). Also, a two‐step treatment of metal substrates was performed: the metal substrates were treated with the BTSE silane followed by a γ‐MPS treatment. The influence of metal substrate and the pH value of the silane film properties were investigated using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). The results show that the BTSE silane is fully hydrolysed but the γ‐MPS silane is not. The presence of negative ions of the type HSi_xO_y^? indicates that both types of silane films are highly cross‐linked via Si–O–Si bonds. The two‐step treatment gave a γ‐MPS silane layer on top of the BTSE silane layer but the thickness of the total silane film become thinner than for a single BTSE film, indicating that some of the BTSE is dissolved during the γ‐MPS deposition step. Furthermore, the ToF‐SIMS results show that the thiol group of the γ‐MPS silane is oxidized. Finally, no major influence, either in the positive or the negative mass spectra, from the different metal substrates could be detected for the silane films investigated. Copyright © 2003 John Wiley & Sons, Ltd.     

Vorstufen für polymere Silazane mit Fluoralkyl-Seitenketten und ihr Kondensationsverhalten

Preliminary Stages of Polymeric Silazanes with Fluoroalkyl Side Chains and their Condensation Behaviour Tetrakis(2,2,2-trifluoroethyl)aminosilane has been synthesized by aminolysis of silicon tetrachloride with 2,2,2-trifluorethylamine. The characterisation of the silane tetramine was carried out spectroscopically and by X-ray-methods. The thermal condensation has been investigated between 60°C and 300°C. At 300°C the formation of oligospirocycloorganoazanes was observed which have been identified spectroscopically. The new silane tetramine reacts with trimethylalumina in toluene. The product has been characterized by crystal structure analysis to be a dimeric (C₁₈H₂₆N₈F₂₄Si₂Al₂). (P1 ; a = 920.39(9), b = 943.32(2), c = 1235.4(1) pm, α = 68.8(7)°, β = 86.9(4)°, γ = 62.6(4)°, Z = 1, 3923 independent reflections; R = 0.059, Rw = 0.054)     

Kristallstruktur des Bis[lithium-tris(trimethylsilyl)-hydrazids] und Reaktionen mit Fluorboranen, -silanen und -phosphanen

Crystal Structure of Bis[lithium-tris(trimethylsilyl)hydrazide] and Reactions with Fluoroboranes, -silanes, and -phospanes Tris(trimethylsilyl)hydrazine reacts with n-butyllithium in n-hexane to give the lithium-derivative 1 . The reaction of 1 with SiF₄, PhSiF₃, BF₃ · OEt₂, F₂BN(SiMe₃)₂ and PF₃ leads to the substitution products 2–6 . The 1,2-diaza-3-bora-5-silacyclopentane 7 is formed by heating (Me₃Si)₂N? N(SiMe₃)(BFNSiMe₃)₂ ( 5 ) at 250°C. In the reaction of (Me₃Si)₂N? N(SiMe₃)PF₂ ( 6 ) with lithiated tert.-butyl(trimethylsilyl)amine the hydrazino-iminophosphene (Me₃Si)₂N? N = P? N(SiMe₃)(CMe₃) ( 8 ) is obtained. In the molar ratio 2:1 1 reacts with SiF₄ and BF₃ · OEt₂ to give bis[tris(trimethylsilyl)hydrazino]silane 9 and -borane 10 .     

Darstellung und Kristallstruktur von Tetrakis(pentafluorphenylamino)silan

Synthesis and Crystal Structure of Tetrakis(pentafluorophenylamino)silane Colourless single-crystals of Tetrakis(pentafluorophenylamino) silane were obtained from the reaction of SiCl₄ with monolithiated pentafluoroaniline at low temperatures. The aminosilane has been characterized by various spectroscopic methods and its crystal structure has been determined by x-ray diffraction (for details see “Inhaltsübersicht”). Thermal condensation has not been achieved. However, reaction of silicon(IV)-chloride with pentafluoroaniline in the presence of triethylamine yielded the respective tricyclosilazane.     

AlCl3-Catalyzed transformations of organo(trichloromethyl) silanes

Reactions of organo(trichloromcthyl)silanes RMc₂SiCCl₃ (R = Me, Ph, Mc₃Si) with aluminum chloride have been studied. The interaction of trimetltyl(tricltlorometltyl)silane with AlCl₃ carried out in cyclohexane or in benzene leads to Me₃SiCHCI₂ (in 75 % yield) or ClMe₂SiCPh₂Me (in 70 % yield), respectively; whereas no conversions are observed inn-hexane and methylene chloride. Treatment of dimetltyl(phenyl)(ricltloromethyl)silane with aluminum chloride in a_n-C₅H₁₂/CH₂CI₂ mixture gives an aromatic cross-linked insoluble polymer. The reaction of pentamethyl(trichloromcthyl)disilane (R = Mc₃Si) with AICl₃ in pentane affords the rearrangement product, Me₃SiCCl₂SiMc₂Cl, in 65 % yield. In methylene chloride the further cleavage of the disilane occurs to yield Me₂SiCl₂ and CH₂=CHMe₂SiCl.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1511-1515, June, 1996.     

Studies on reactive blending of LDPE and cenosphere

The present work aims to modify conventional low density polyethylene (LDPE) by preparing its particulate composite with cenosphere. Cenosphere is a potential waste produced in bulk from the coal fired thermal power plant. In this context, surface modification of cenosphere was done by γ- aminopropyl triethoxy silane (ATS) coupling agent. Furthermore, LDPE was grafted by glycidyl methacrylate (GMA) to be used as compatibilizer. The resulting surface modified and unmodified cenosphere as well as glycidyl methacrylate grafted LDPE (LDPE-g-GMA) were functionally characterized by Fourier Transform Infrared (FT-IR) spectroscopy. LDPE-cenosphere particulate composites were processed in their different formulations and evaluated with various properties such as thermal stability, mechanical properties, chemical resistance and flow behaviour. Dispersibility of cenosphere in LDPE matrix was studied by Scanning Electron Microscopy (SEM). Series of analysis was performed in order to understand the effect of cenosphere content and its modification on the final properties of particulate composites. Mechanical properties were found to be statistically significant as per ANOVA and Post hoc Tukey HSD test. Particulate composites prepared with modified interphase were observed to possess good combination of properties.     

Synthesis and Characterization of Poly(methyl methacrylate)-b-Polystyrene/TiO2 Nanocomposites Via Reversible Addition-Fragmentation Chain Transfer Polymerization

A diblock copolymer, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), was grafted onto the surface of nano-titania (nano-TiO₂) successfully via reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of TiO₂ nanoparticles was modified initially by attaching dithioester groups to the surface using silane coupling agent 3-(chloropropyl)triethoxy silane and sodium ethyl xanthate. The polymerization of methyl methacrylate and styrene were then initiated and propagated on the TiO₂ surface by RAFT polymerization. The resulting composite nanoparticles were characterized by means of XPS, FT-IR, ¹H NMR and TGA. The results confirmed the successful grafting of poly(methyl methacrylate) (PMMA) and diblock copolymer chains onto the surface of TiO₂. The amount of PMMA grafted onto the TiO₂ surface increased with the polymerization time. Moreover, the kinetic studies revealed that the ln([M]₀/[M]), where [M]₀ is the initial and [M] is the time dependent monomer concentrations, increased linearly with the polymerization time, indicating the living characteristics of the RAFT polymerization.     

Stereochemistry in Lewis acid-catalyzed silylation of alcohols, silanols, and methoxysilanes with optically active methyl(1-naphthyl)phenylsilane

Stereochemistry in silylation reactions of alcohols, silanols, and methoxysilanes with optically pure (R)-methyl(1-naphthyl)phenylsilane were studied in the presence of Lewis acid catalysts. Tris(pentafluorophenyl)borane [B(C₆F₅)₃] was found to be highly reactive and stereoselective in the reactions. Optically active (R)-(alkoxy)methyl(1-naphthyl)phenylsilanes with 91–97% ee were produced from alcohols through the inversion stereochemistry of the silane. Stereoselectivity in the reaction with triphenylsilanol was moderate (64% ee). (R)-1,3-Dimethyl-1-(1-naphthyl)-1,3,3-triphenyldisiloxane with 94% ee was obtained from the silane with (methoxy)methyldiphenylsilane. The reaction with (R)-(methoxy)methyl(1-naphthyl)phenylsilane (88% ee) gave (R, R)-1,3-dimethyl-1,3-di(1-naphthyl)-1,3-diphenyldisiloxane [(R, R):(R, S):(S, S) = 87:12:0.5]. The stereochemistry was proved to almost completely inversion and retention for the chiral silicon centers of the silane and methoxysilane, respectively.     

Mathematical simulation of gas-phase deposition of epitaxial silicon films in the Si-C-H and Si-H systems

The effect of experimental conditions on the magnitude and uniformity of the deposition rate of epitaxial silicon obtained by chemical deposition from the gas phase in the SiCl₄-H₂, SiHCl₃-H₂, and SiH₄-H₂ systems (in the temperature ranges from 1300 to 1520 K for the chloride and 1270 to 1370 K for the silane systems) has been examined. Chloride and silane processes are compared.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1217–1222, July, 1995.     

Kinetics of hydrolysis and self condensation reactions of silanes by NMR spectroscopy

The hydrolysis of four alkoxy-silane coupling agents, 3-methacryloxypropyl trimethoxy silane (MPMS), 3-mercaptopropyl trimethoxy silane (MRPMS), octyl triethoxy silane (OES) and 3-aminopropyl triethoxy silane (APES) was carried out in an ethanol/water 80/20 (w/w) solution under acidic, alkaline and neutral conditions and followed by ¹H, ¹³C and ²⁹Si NMR spectroscopy. It was found that the kinetic rate of the hydrolysis of the silanes under neutral conditions was very low, except for APES, which displayed the fastest reaction speed. The addition of TEA catalyzed both silane hydrolysis and self condensation reactions. Acidic conditions enhanced the hydrolysis and the ensuing silanol entities were quite stable. In fact, these conditions slowed down the rate of the self condensation reactions, as deduced from in situ ¹H and ¹³C NMR. Thanks to in situ ²⁹Si NMR spectroscopy, the nature of the intermediary species versus reaction time was established.