Manipulating FRET with polymeric vesicles: development of a "mix-and-detect" type fluorescence sensor for bacterial toxin

A simple "mix-and-detect" type of fluorescence sensor for cholera toxin (CT) is reported. The sensor consists of a BODIPY lipid dye and polydiacetylene (PDA) vesicles and utilizes the lipid insertion and FRET mechanism to offer a direct and fluorescence "turn-on" detection of the analyte. BODIPY conjugated GM1, dissolved in a Tris buffer through aggregate formation, demonstrated substantial fluorescence quenching with addition of PDA vesicle solution. The close proximity of the dye molecules to the conjugated chains as a result of lipid insertion enables energy transfer from dye to the polymer backbone, yielding the observed phenomenon. When CT is present, the binding of BO-GM1 to CT results in formation of a complex that prohibits it from membrane insertion, leading to the blocking of the quenching process. The fluorescence signal was found to be proportional to the CT concentration. The method is very simple and allows specific and sensitive detection of the protein toxin with just a few mixing steps. It can be further developed into a general sensing strategy for detection of other proteins with amplified FRET mechanism.     

Comprehensive two-dimensional separation system by coupling capillary reverse-phase liquid chromatography to capillary isoelectric focusing for peptide and protein mapping with laser-induced fluorescence detection

A comprehensive two-dimensional (2-D) separation system, coupling capillary reverse-phase liquid chromatography (cRPLC) to capillary isoelectric focusing (CIEF), is described for protein and peptide mapping. cRPLC, the first dimension, provided high-resolution separations for salt-free proteins. CIEF, the second dimension with an orthogonal mechanism to cRPLC afforded excellent resolution capability for proteins with efficient protein enrichment. Since all sample fractions in cRPLC effluents could be transferred to the CIEF dimensions, the combination of the two high-efficiency separations resulted in maximal separation capabilities of each dimension. Separation effectiveness of this approach was demonstrated using complex protein/peptide samples, such as yeast cytosol and a BSA tryptic digest. A peak capacity of more than 10 000 had been achieved. A laser-induced fluorescence (LIF) detector, developed for this system, allowed for high-sensitive detection, with a fmol level of peptide detection for the BSA digest. FITC and BODIPY maleimide were used to tag the proteins, and the latter was found better both for separation and detection in our 2-D system.     

Sensitive, label-free protein assay using 1-ethyl-3-methylimidazolium tetrafluoroborate-supported microchip electrophoresis with laser-induced fluorescence detection

Based on the dimer-monomer equilibrium movement of the fluorescent dye Pyronin Y (PY), a rapid, simple, highly sensitive, label-free method for protein detection was developed by microchip electrophoresis with LIF detection. PY formed a nonfluorescent dimer induced by the premicellar aggregation of an anionic surfactant, SDS, however, the fluorescence intensity of the system increased dramatically when proteins such as BSA, bovine hemoglobin, cytochrome c, and trypsin were added to the solution due to the transition of dimer to fluorescent monomer. Furthermore, 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4) instead of PBS was applied as running buffers in microchip electrophoresis. Due to the excellent properties of EMImBF4, not only nonspecific protein adsorption was more efficiently suppressed, but also approximately ten-fold higher fluorescence intensity enhancement was obtained than that using PBS. Under the optimal conditions, detection limits for BSA, bovine hemoglobin, cytochrome c, and trypsin were 1.00x10(-6), 2x10(-6), 7x10(-7), and 5x10(-7) mg/mL, respectively. Thus, without covalent modification of the protein, a protein assay method with high sensitivity was achieved on microchips.     

氟硼二吡咯探针在肿瘤检测中的应用

目前,肿瘤是世界上死亡率最高的疾病之一,早期肿瘤细胞的检测对于肿瘤的预防和治疗具有重要意义。当前针对肿瘤细胞的检测手段主要有X光、计算机断层扫描(CT)、磁共振成像(MRI)等,但借助这些手段检测出来的肿瘤细胞通常已生长到中后期,极不利于肿瘤的治疗。荧光成像作为生命科学研究领域常用的手段之一,近年来被用于肿瘤细胞检测,与其他检测方法相比,具有微创、高效、低成本和更加灵敏等优势。氟硼二吡咯(BODIPY)荧光染料作为荧光成像的工具之一,因具有荧光量子产率高、稳定性好、易于修饰等独特优势,被广泛应用于肿瘤细胞检测领域。与常规检测手段相比,BODIPY探针可以靶向肿瘤细胞内细胞器或肿瘤标志物,达到检测早期肿瘤细胞的目的。本文综述了靶向不同标记分子的BODIPY探针的应用,并分析了BODIPY探针的作用机理,以期为肿瘤的临床检测提供更加方便、快捷、直观、灵敏的工具。     

Preparation of an IMI dye (imidazole functional group) containing a 4-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole fluorophore for labeling of phosphomonoesters

We are studying dye-imidazole conjugates ("IMI dyes") as reagents for labeling phosphomonoesters such as nucleotides. Previously we have employed a BODIPY dye in our IMI reagents, and analyzed the labeled products by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) involving an argon ion laser. (The BODIPY fluorophore is a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene). Here we broaden the technology by preparing a DBD-IMI dye [DBD = 4-(N,N-dimethylaminosulfonyl)-2,1,3-benzoxadiazole], and using a helium-cadmium laser. While DBD-IMI (IMI3) is about 50x more stable photolytically than a BODIPY-IMI dye (IMI2, a conjugate of a BODIPY dye with histamine, was tested), the detection limit for IMI2 (5.10(-11) M; S/N = 5, CE-LIF with an argon ion laser) is tenfold better than that for IMI3 (5.10(-10) M, S/N = 5, helium-cadmium laser). IMI3 conjugates of the four major DNA nucleotides were prepared and detected by CE-LIF.     

Monitoring stepwise proteolytic degradation of peptides by supramolecular domino tandem assays and mass spectrometry for trypsin and leucine aminopeptidase

A label-free optical detection method has been designed that allows direct monitoring of enzymatic peptide digestion in vitro. The method is based on the addition of a reporter pair, composed of the macrocyclic host cucurbit[7]uril (CB7) and the fluorescent dye acridine orange (AO), to detect the proteolytic degradation of peptides. The enzymatic activity of trypsin and leucine aminopeptidase (LAP) was investigated using H-LSRFSWGA-OH as a substrate. The substrate as well as the intermediary and final products (i.e., H-FSWGA-OH and phenylalanine) formed during its enzymatic hydrolysis differ in their binding affinity to the receptor CB7, which results in varying degrees of dye displacement and, therefore, different fluorescence intensities. CB7 showed a relatively weak binding constant of K approximately 10(4) M(-1) with the substrate, a relatively strong binding constant of K > or = 10(6) M(-1) with H-FSWGA-OH (which is a final product formed by trypsin digestion and the intermediary product formed during the enzymatic activity of LAP), and a moderate binding constant of K < or = 10(5) M(-1) with phenylalanine. Owing to this differential binding affinity of CB7 with the substrate and the corresponding products, the digestion of a peptide by trypsin was followed as a decrease in fluorescence signal, while the complete degradation of the peptide by LAP was monitored as a decrease and a subsequent increase in fluorescence signal. The k(cat)/K(M) value for trypsin (2.0 x 10(7) min(-1) M(-1)) was derived from the change in fluorescence signal with time. Additionally, the complete degradation of the peptide by LAP was also followed by mass spectrometry. The use of a supramolecular sensing ensemble (macrocyclic host and dye) as a fluorescent reporter pair gives this method the flexibility to adapt for monitoring the stepwise degradation of different biologically relevant peptides by other proteases.     

RNA analysis by MEKC with LIF detection

We have developed and validated a procedure of high sensitivity for the analysis of RNA. The procedure is based on the separation and detection of the 5'-monophosphates of ribonucleosides selectively conjugated with 4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-propionyl ethylene diamine hydrochloride (BODIPY FL EDA) at the 5'-phosphate group using CE with LIF. BODIPY conjugates of the four common ribonucleoside-5'-monophosphates were prepared and subjected to CE-LIF to serve as standard compounds for peak assignment and to develop separation conditions. After digestion of RNA or oligoribonucleotides to 5'-monophosphates by nuclease P1 and fluorescence labeling BODIPY conjugates were detected and resolved by CE-LIF without further purification steps. Comparative CE-LIF analyses with DNA digested to deoxyribonucleoside-5'-monophosphates showed that the assay is equally efficient and sensitive for RNA analysis. Conditions to determine the modified ribonucleosides inosine, xanthosine, pseudouridine and 2'-O-methyladenosine were also established. The limits of detection were in the range of 80-200 pM. After calibrating the assay with oligoribonucleotides, pseudouridine was quantified in total RNA of Drosophila, human liver, human kidney and t-RNA of Saccharomyces cerevisiae. These studies demonstrate good potential of fluorescence labeling of ribonucleoside-5'-monophosphates with BODIPY FL EDA and detection by CE-LIF to determine RNA composition with high accuracy and sensitivity.     

A nanoscale vesicular polydiacetylene sensor for organic amines by fluorescence recovery

We report a nanoscale lipid membrane-based sensor of conjugated polydiacetylene (PDA) vesicles for fluorescence detection of organic amines. The vesicle sensor was constructed by incorporation of a BODIPY fluorescent dye into the PDA vesicles. The fluorescent properties of the resulting vesicles can be manipulated by adjusting lipid components, and are controlled by environmental and solution conditions. The fluorescence of the BODIPY dye was significantly quenched in the polymerization of diacetylene lipid vesicles by a UV irradiation process. However, it was sufficiently recovered by external stimuli such as a hike of solution pH. The fluorescence recovery process was reversible, and a decrease in solution pH resulted in repeated quenching. The reported system transforms an external stimulus into a large fluorescence intensity change, demonstrating great potential in developing new signal reporting method for biosensor design. The quench-recovery phenomenon of the BODIPY-PDA is believed to be related to the energy transfer between the dye and the PDA conjugate backbone. The vesicle sensor was applied for detecting an organic amine, triethylamine (TEA) and a large linear relationship was obtained between the increase in fluorescence intensity and the concentrations of TEA. The detection limit of TEA by vesicle sensors using fluorescence recovery was found to be 10 μM.     

Determination of the cardiolipin content of individual mitochondria by capillary electrophoresis with laser-induced fluorescence detection

We report the application of capillary electrophoresis (CE) with postcolumn laser-induced fluorescence (LIF) detection to measure the cardiolipin content of individual mitochondria from cultured NS1 cells. Mitochondria were isolated by differential centrifugation and stained with the fluorescent dye 10-N-nonyl acridine orange which stoichiometrically binds to cardiolipin in a 1:1 or 2:1 ratio depending on the dye concentration. The green fluorescence resulting from the 1:1 complex was chosen for analysis because it is substantially more intense than the red fluorescence resulting from the 2:1 complex. Two dye concentrations that resulted in maximal and submaximal formation of the 1:1 10-N-nonyl acridine orange-cardiolipin complex were identified by spectrofluorometry. Individual mitochondria stained with both dye concentrations were separated and detected by CE with LIF detection. The data from mitochondria dosed with the lower dye concentration, where it is assumed that all the dye added to the mitochondrial sample was bound to cardiolipin, were used to derive a sensitivity factor relating fluorescence intensity of a mitochondrial event to its cardiolipin content. Using this factor, the cardiolipin contents of individual mitochondria stained with the higher dye concentration were determined, and ranged from 1.2 to 920 amol, with a median value of 4 amol. These results suggest a new strategy for estimating the organellar content of compounds that can be fluorescently tagged.     

Synthesis and Characterization of Far‐Red/NIR‐Fluorescent BODIPY Dyes,Solid‐State Fluorescence,and Application as Fluorescent Tags Attached to Carbon Nano‐onions

A series of π‐extended distyryl‐substituted boron dipyrromethene (BODIPY) derivatives with intense far‐red/near‐infrared (NIR) fluorescence was synthesized and characterized, with a view to enhance the dye’s performance for fluorescence labeling. An enhanced brightness was achieved by the introduction of two methyl substituents in the meso positions on the phenyl group of the BODIPY molecule; these substituents resulted in increased structural rigidity. Solid‐state fluorescence was observed for one of the distyryl‐substituted BODIPY derivatives. The introduction of a terminal bromo substituent allows for the subsequent immobilization of the BODIPY fluorophore on the surface of carbon nano‐onions (CNOs), which leads to potential imaging agents for biological and biomedical applications. The far‐red/NIR‐fluorescent CNO nanoparticles were characterized by absorption, fluorescence, and Raman spectroscopies, as well as by thermogravimetric analysis, dynamic light scattering, high‐resolution transmission electron microscopy, and confocal microscopy.     

Estimation of protein concentration at high sensitivity using SDS‐capillary gel electrophoresis‐laser induced fluorescence detection with 3‐(2‐furoyl)quinoline‐2‐carboxaldehyde protein labeling

3‐(2‐furoyl)quinoline‐2‐carboxaldehyde (FQ) is a sensitive fluorogenic dye, used for derivatization of proteins for SDS‐CGE with LIF detection (SDS‐CGE‐LIF) at silver staining sensitivity (ng/mL). FQ labels proteins at primary amines, found at lysines and N‐termini, which vary in number and accessibility for different proteins. This work investigates the accuracy of estimation of protein concentration with SDS‐CGE‐LIF in real biological samples, where a different protein must be used as a standard. Sixteen purified proteins varying in molecular weight, structure, and sequence were labeled with FQ at constant mass concentration applying a commonly used procedure for SDS‐CGE‐LIF. The fluorescence of these proteins was measured using a spectrofluorometer and found to vary with a RSD of 36%. This compares favorably with other less sensitive methods for estimation of protein concentration such as SDS‐CGE‐UV and SDS‐PAGE‐Coomassie and is vastly superior to the equivalently sensitive silver stain. Investigation into the number of labels bound with UHPLC‐ESI‐QTOF‐MS revealed large variations in the labeling efficiency (percentage of labels to the number of labeling sites given by the sequence) for different proteins (from 3 to 30%). This explains the observation that fluorescence per mole of protein was not proportional to the number of lysines in the sequence.     

BODIPY‐Based Fluorescent Thermometer as a Lysosome‐Targetable Probe: How the Oligo(ethylene glycols) Compete Photoinduced Electron Transfer

A novel BODIPY‐based fluorescent thermometer, which shows a lysosome‐targeting property, was successfully prepared. Due to the electron‐donating ability of the oligo(ethylene glycols), the photoinduced electron‐transfer pathway from morpholine to BODIPY dye is blocked. The fluorescence of the thermometer quenched by intramolecular rotation at room temperature was progressively enhanced during heating due to the increased microviscosity around the fluorophore.     

Polymeric fluorescent dyes for labeling of proteins and nucleic acids

In order to increase the sensitivity of fluorescence labeling in biochemical reactions and diagnostic procedures a labeling technique with polymeric fluorescence dyes was established and tested for its applicability. The fluorescence dye is based on the fluorophor coumarine and was covalently linked to the model proteins strepavidine and IgG. The dye was synthesized by radical polymerization of three different types of functional monomers to ensure water solubility, covalent coupling to proteins, and fluorescence. The molecular weight range was between 20 and 200 kDa. Fractions of narrow molecular weight distribution were prepared by gel filtration on Superdex 200. The relationship between size and charge of the different fractions was analyzed by gel electrophoresis. Covalent conjugation to proteins was carried out by formation of a peptide bond between a carboxylic group of the functional monomers and an amino group of the protein mediated by 1-ethyl-3-(3-dimethylamino-propyl)-carbodiimide (EDC). A novel type of gel electrophoresis was developed in order to analyze and optimize the conjugation reaction; the results were in agreement with those from analytical ultracentrifugation with fluorescence detection. Hydrodynamic studies of the uncoupled dye and the protein-dye conjugates exhibited a drastic decrease of Stokes radius of the dye due to the coupling to the protein. Under optimum conditions the fluorescence intensity of a protein-polymeric dye conjugate was enhanced 40-fold compared to a monomeric dye. Biotin binding to the protein streptavidin was not affected significantly by the conjugation with the polymeric dye. At present, the applicability of the polymeric dye in biochemical and diagnostic reactions seems to be limited due to strong but unspecific hydrophobic interactions which might be overcome by using fluoresceine as monomeric dye.     

含碘二氧化硅纳米颗粒对BODIPY染料光动力效果的影响

利用含碘硅烷前体制备包裹BODIPY染料分子的纳米二氧化硅颗粒.颗粒中的碘原子通过重原子效应有效提高了BODIPY染料分子的系间窜越效率,进而提高了染料分子的单重态氧量子产率及光损伤DNA的能力.这一结果表明,含碘二氧化硅纳米颗粒可以成为众多荧光染料分子在光动力疗法领域应用的一个有效药物负载和输送体系.     

An integrated solid-phase extraction system for sub-picomolar detection

A microchip structure etched on a glass substrate for packed column solid-phase extraction (SPE) and capillary electrochromatography (CEC) is described. A 200 microm long, octadecylsilane (ODS) packed column was secured using two different approaches: solvent lock or polymer entrapment. The former method was utilized for SPE while the latter approach was applied for CEC. In SPE, the ODS packed chamber gave a detection limit of 70 fM for a nonpolar BODIPY (493/503) dye when concentrated for 3 min at an electroosmotic flow rate of 4.14 nL/min, compared to 30 pM for this detector without the SPE step. SPE beds showed reproducible, linear calibration curves (R(2) = 0.9989) between 1 and 100 pM BODIPY at fixed preconcentration times. Breakthrough curves for the 330 pL (ODS-packed) bed indicated a capacity for BODIPY dye of 8.1 x 10(-14) mmol, or 0.25 mmol dye per liter of bed. The ODS-chamber could also be used to analyze dilute amino acid and peptide solutions. In the CEC format, two neutral dyes (BODIPY and acridine orange) were baseline-separated in an isocratic run with a theoretical plate count of 84 (420 000 plates/m) and a reduced plate height of about 1. A labeled peptide was also analyzed by CEC, using the acidic eluent (84% acetonitrile, and 26% aqueous trifluoroacetic acid (0.05%)) preferred for peptide separations on ODS-coated silica particles.     

Laser-induced fluorescence detection schemes for the analysis of proteins and peptides using capillary electrophoresis

Over the past few years, a large number of studies have been prepared that describe the analysis of peptides and proteins using capillary electrophoresis (CE) and laser-induced fluorescence (LIF). These studies have focused on two general goals: (i) development of automatic, selective and quick separation and detection of mixtures of peptides or proteins; (ii) generation of new methods of quantitation for very low concentrations (nm and subnanomolar) of peptides. These two goals are attained with the use of covalent labelling reactions using a variety of dyes that can be readily excited by the radiation from a commonly available laser or via the use of noncovalent labelling (immunoassay using a labelled antibody or antigen or noncovalent dye interactions). In this review article, we summarize the works which were performed for protein and peptide analysis via CE-LIF.     

Fluorescence Quenching in BODIPY Dyes: The Role of Intramolecular Interactions and Charge Transfer

The fluorescence properties of the BODIPY dye and its two meso‐substituted derivatives, tert‐butyl‐ and phenyl‐BODIPY , are rationalized. The non‐emissive behavior of the latter two are attributed to the energetically accessible low‐lying conical intersection between the ground state and the lowest excited singlet state. Both intramolecular non‐covalent interactions and excited state charge transfer character are identified as being crucial for ‘stabilizing’ the intersection and prompting the nonradiative decay. Similar crossing was located in the bare BODIPY dye, however, being energetically less accessible, which correlates well with the high fluorescence quantum yields of the parent dye.     

Synthesis of π-expanded O-chelated boron-dipyrromethene as an NIR dye

A π-expanded BODIPY dye with an intramolecular boronate skeleton was synthesized by retro Diels-Alder reaction of the bicyclo[2.2.2]octadiene (BCOD)-fused BODIPY and the subsequent O-chelation. The photophysical and electrochemical properties were examined by UV-vis, fluorescence, CV measurements, and DFT calculation. This BODIPY exhibited the absorption and emission over a visible-NIR region at 600-850 nm. O-chelated BODIPY showed a bathocromic shift compared to F-BODIPYs. This dye showed a bright fluorescence emission at 733 nm with the high Φ value of 0.58.     

Analysis of alpha-1-acid glycoprotein isoforms using CE-LIF with fluorescent thiol derivatization

The analysis of glycoprotein isoforms is of high interest in the biomedical field and clinical chemistry. Many studies have demonstrated that some glycoprotein isoforms could serve as biomarkers for several major diseases, such as cancers and vascular diseases, among others. Capillary zone electrophoresis (CZE) is a well-established technique to separate glycoprotein isoforms, however, it suffers from limited sensitivity when UV-Vis detection is used. On the other hand, with laser-induced fluorescence (LIF) detection, derivatization reaction to render the proteins fluorescent can destroy the resolution of the isoforms. In this work, a derivatization procedure through the thiol groups of glycoproteins using either 5-(iodoacetamide) fluorescein (5-IAF) or BODIPY iodoacetamide is presented with the model protein of alpha-1-acid glycoprotein (AGP). The derivatization process presented enabled high-resolution analysis of AGP isoforms by CZE-LIF. The derivatization procedure was successfully applied to label AGP from samples of serum and secretome of artery tissue, enabling the separation of the AGP isoforms by CE-LIF in natural samples at different concentration levels.     

Protein fingerprinting of Staphylococcus species by capillary electrophoresis with on-capillary derivatization and laser-induced fluorescence detection

Capillary electrophoresis (CE) coupled with laser-induced fluorescence detection (LIF) has allowed to obtain protein fingerprints, which have demonstrated to be useful in microorganisms characterization. In this work, protein fingerprints of two species of Staphylococcus grown in different culture media and submitted to temperature and nitrosative stress were studied by CE-LIF. After the growth of the bacteria, protein extracts were obtained by cell lysis using sonication. The water-soluble fraction of these lysates was derivatized on-capillary with a fluorogenic dye, 3-(2-furoyl)quinoline-2-carboxaldehyde. The fluorescent products were analyzed by CE using phosphate buffer containing submicellar concentrations of sodium pentanesulfate and detected by LIF. Different protein fingerprints were obtained depending on the bacterial specie studied, indicating the usefulness of this method for the identification of different species of the same bacterial genus. It was also demonstrated that the CE protein fingerprints were dependent on the culture conditions, such as growth medium, or on stressing conditions, such as heat shock or nitrosative stress.