Luminescent Fluorene-Based Bis-Pyrazolyl Aniline Ligand for Aluminum Detection

The design, synthesis, and photophysical properties of a new fluorene-based fluorescent chemosensor, 4-((E)-2-(2-(benzo[d]thiazol-2-yl)-9,9-diethyl-9H-fluoren-7-yl)vinyl)-N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)benzenamine (AXF-Al), is described for the detection of Al³⁺. AXF-Al exhibited absorption at 382 nm and strong fluorescence emission at 542 nm (fluorescence quantum yield, Φ _F, of 0.80). The capture of Al³⁺ by the pyrazolyl aniline receptor resulted in nominal change in the linear absorption (372 nm) but a large hypsochromic shift of 161 nm in the fluorescence spectrum (542 to 433 nm, Φ _F?=?0.88), from which Al³⁺ was detected both ratiometrically and colorimetrically. The addition of other metal ions, namely Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg ²⁺ and Pb²⁺, produced only minimal changes in the optical properties of this probe. The emission band of this probe was also accessed by two-photon excitation in the near-IR, as two-photon absorption (2PA) is important for potential applications in two-photon fluorescence microscopy (2PFM) imaging. The 2PA cross section of the free fluorenyl ligand AXF-Al was 220 GM at 810 nm and 235 GM at 810 nm for the Al-ligand complex, practically useful properties for 2PFM.     

Luminescent Benzothiazole-Based Fluorophore of Anisidine Scaffoldings: a “Turn-On” Fluorescent Probe for Al<Superscript>3+</Superscript> and Hg<Superscript>2+</Superscript> Ions

A new anisidine possessing benzothiaozle-based chemosensor (1) has been designed and synthesized. The chemosensor 1 was designed to provide hard base environment for ratiometric detection of comparatively less studied Al³⁺ ions. In CH₃CN, the fluorescence spectra of chemosensor 1 red shifted from 368 to 430 nm with addition of Al³⁺ and Hg²⁺ ions; while Cu²⁺ ions caused quenching of emission intensity of 1. These differential changes observed with Al³⁺ and Cu²⁺ ions addition enabled chemosensor 1 to construct “NOR” and “TRANSFER” logic gates.     

Bis-Benzimidazolyl Diamide Based Fluorescent Probe for Copper(II): Synthesis, Structural and Fluorescence Studies

A new fluorescent probe based on a bis-benzimidazole diamide N ²,N ^2′-bis[(1-ethyl-benzimidazol-2-yl)methyl]biphenyl-2,2′-dicarboxamide ligand L ₁ with a biphenyl spacer group and a Copper(II) trinuclear metallacycle has been synthesized and characterized by X-ray single crystallography, elemental and spectral (FT-IR, ¹H & ¹³C NMR, UV-Visible) analysis. The fluorescence spectra of L ₁ in MeOH show an emission band centered at 300 nm. This band arises due to benzimidazolyl moiety in the ligating system. The diamide L ₁ in the presence of Cu²⁺ show the simultaneous ‘quenching’ of (300 nm) and ‘enhancement’ of (375 nm) emission band. Similar fluorescence behavior was found in water–methanol mixture (9:1). The new emission band at 375 nm is attributed to intra ligand π–π* transition of the biphenyl moiety. L ₁ exhibited high selectivity and sensitivity towards Cu²⁺ in both the medium over other common metal ions like Ni²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Pb²⁺ and Hg²⁺. The binding constant with Cu²⁺ was calculated by the Benesi-Hildebrand equation. Selective “off-on-off” behavior of L ₁ in methanol has also been studied. The fluorescent intensity of 375 nm bands in L ₁ enhances (turns-on) upon addition of Cu²⁺ and quenches (turn-off) upon addition of Na₂-EDTA.     

Urea Based Dipodal Fluorescence Receptor for Sensing of Fe3+ Ion in Semi-Aqueous Medium

Urea based fluorescent chemosensor 1 was synthesized. Receptor 1 shows unique selectivity for the Fe³⁺ion and no such significant response was noticed with other metal ions (Cr³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Bi³⁺) in DMSO/H₂O (50:50,v/v) semi-aqueous solution. The binding features have been established by absorption and fluorescence spectroscopic methods. The binding constant (K) values obtained from Benesi-Hildebrand, Scatchard and Connor plot for receptor 1 is (8.3?±?0.3) × 10³ M^?1 and has good detection limit 0.7?μM. The stoichiometry of 1.Fe³⁺ complex was confirmed by mass spectroscopy and Job’s plot.

A Pyrene-based Highly Selective Turn-on Fluorescent Chemosensor for Iron(III) Ions and its Application in Living Cell Imaging

A new pyrene-based chemosensor (1) exhibits excellent selectivity for Fe³⁺ ions over a wide range of tested metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. The binding of Fe³⁺ to chemosensor 1 produces an emission band at 507 nm due to the formation of a Py-Py* excimer that is induced by Fe³⁺-binding. The binding ratio of 1-Fe³⁺ was determined to be 1:1 from a Job plot. The association constant of 1-Fe³⁺ complexes was found to be 1.27?×?10⁴ M^?1 from a Benesi-Hildebrand plot. In addition, fluorescence microscopy experiments show that 1 can be used as a fluorescent probe for detecting Fe³⁺ in living cells.     

A Dansyl-Rhodamine Ratiometric Fluorescent Probe for Hg<Superscript>2+</Superscript> Based on FRET Mechanism

Based on resonance energy transfer (FRET) from dansyl to rhodamine 101, a new fluorescent probe (compound 1) containing rhodamine 101 and a dansyl unit was synthesized for detecting Hg²⁺ through ratiometric sensing in DMSO aqueous solutions. This probe shows a fast, reversible and selective response toward Hg²⁺ in a wide pH range. Hg²⁺ induced ring-opening reactions of the spirolactam rhodamine moiety of 1, leading to the formation of fluorescent derivatives that can serve as the FRET acceptors. Very large stokes shift (220 nm) was observed in this case. About 97-fold increase in fluorescence intensity ratio was observed upon its binding with Hg²⁺.     

Indole-based Fluorescent Sensors for Selective Detection of Hg2+

A series of indole-based fluorescent chemosensors 1–4 were prepared and investigated characteristick features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion among a series of metal ions in H₂O–DMSO with association constants of 4.60×10⁴ and 5.90×10⁴?M^?1 and detection limits of 140 and 101.6 μM, respectively.

A Fluorescent Chemodosimeter for Hg2+Based on a Spirolactam Ring-Opening Strategy and its Application Towards Mercury Determination in Aqueous and Cellular Media

A novel fluorescent chemosensor rhodamine B phenyl hydrazide (RBPH) for Hg²⁺ was designed and synthesized. This probe is highly sensitive, selective, and irreversible for Hg²⁺ and exhibits fluorescent response at 580 nm. RBPH also displayed detectable color change from colorless to pink upon treatment with Hg²⁺. This property has been utilized as naked eye detection for Hg²⁺ in various industrial samples. Fluorescence microscopic experiments demonstrated that this chemosensor is cell permeable and can be used for fluorescence imaging of Hg²⁺ in cellular media. This probe can detect Hg²⁺ with good linear relationships from 1 to 100 nM with r?=?0.99983 and the limit of detection were found to be 0.019 nM with?±?0.91 % RSD at 10 nM concentrations.     

A Novel Colorimetric and Fluorescent “Off-On” Chemosensor for Cu2+ Based on a Rhodamine Derivative Bearing Naphthyridine Group

A new rhodamine-based derivative bearing a naphthyridine group (compound 1) was synthesized as a colorimetric and fluorescent “off-on” chemosensor for Cu²⁺ in aqueous solutions. The sensing behaviors of 1 toward various metal ions in neutral aqueous solutions were investigated by absorption and fluorescence spectroscopies. Compound 1 is found to exhibit a significant increase in absorbance at 561 nm and an amplified fluorescence at 590 nm toward Cu²⁺ in a selective, sensitive and rapid manner. The quantification of Cu²⁺ by 1 using an absorption spectroscopy method was satisfactory in the linear working range 0.9–10 μM, with a detection limit of 5.4?×?10^?8?M for Cu²⁺ and good tolerance of other metal ions. Upon addition of Cu²⁺, the spirolactam ring (colorless and nonfluorescent) of 1 was opened to ring-opened amide (red color and fluorescent) and a 1:1 stoichiochemetry for the 1-Cu²⁺ complex was formed with an association constant of 1.57?×?10⁴?M^?1.     

Both “Naked-Eye” and Fluorescent Sensor for Hg2+ Based upon 8-Hydroxyquinoline

A chemosensor, 2,2′-(1,4-phenylenedivinylene)bis-8-acetoxyquinoline (1), its fluorescent sensing behavior toward representative alkali ions (Na⁺, K⁺), alkaline earth ions (Mg²⁺, Ca²⁺), and transition-metal ions (Ni²⁺, Cu²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Cd²⁺) was intensively investigated. The compound (1) exhibited pronounced Hg²⁺ selective on–off-type fluoroionophoric properties among the representative ions in DMF/ethanol (1:9, v/v) solution. Moreover, the highly Hg²⁺-selective fluorescence quenching property in conjunction with a visible colorimetric change from colorless to light yellow can be observed, leading to potential fabrication of both “naked-eye” and fluorescent detection of Hg²⁺.     

A Novel Colorimetric and Off–On Fluorescent Chemosensor for Cr3+ in Aqueous Solution and its Application in Live Cell Imaging

A novel colorimetric and off–on fluorescent chemosensor 2 was designed and synthesized, which showed reversible and highly selective and sensitive recognition toward Cr³⁺ over other examined metal ions in aqueous solution. Upon addition of Cr³⁺, the solution of chemosensor 2 resulted in a color change from colorless to obvious pink color, these significant changes in color could be used for naked-eye detection. Chemosensor 2 exhibited a stable response for Cr³⁺ in the range 0–10 μM with a detection limit of 1 ppm. Furthermore, fluorescence imaging experiments of Cr³⁺ ions in living MGC803 cells demonstrated its value of practical applications in biological systems.     

A New On-fluorescent Probe for Manganese (II) Ion

A new fluorescent probe for Mn²⁺ ion, (6E)-N-((E)-1,2-diphenyl-2-(pyridin-2-ylimino)ethylidene)pyridin-2-amine (L), has been synthesized from benzil and 2-amino pyridine and characterized. In 1:1 (v/v) CH₃CN:H₂O (pH 4.0, universal buffer) L exhibits fluorescent intensity with emission peak at λ_max 360 nm on excitation with photons of 310 nm. Fluorescent intensity of L increases distinguishingly on interaction with Mn²⁺ ion compared to metal ions—Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Ag⁺ individually or all together. The enhancement in fluorescent intensity is due to snapping of photoinduced electron transfer (PET) prevailed in free L. Fluorescence and UV/visible spectral data analysis shows that binding stoichiometry between Mn²⁺ and L is 1:1 with log β?≈?3.0. Both L and its Mn²⁺ complex were optimised using density functional theory (DFT) and vibrational frequency calculations confirm that both are at local minima on the potential energy surfaces.     

A Ratiometric and near-Infrared Fluorescent Probe for Imaging Cu<Superscript>2+</Superscript> in Living Cells and Animals

We have rationally constructed a novel ratiometric and near-infrared Cu²⁺ fluorescent probe based on a tricarbocyanine chromophore. The new probe NIR-Cu showed a ratiometric fluorescent response to Cu²⁺ with a large emission wavelength shift (up to 142 nm) in the far-red to near-infrared region. The probe also displayed a large variation in the fluorescence ratio (I₆₃₆/I₇₇₈) to Cu²⁺ species with high sensitivity and selectivity. Additionally, the developed probe NIR-Cu was suitable for fluorescence imaging of Cu²⁺ in living cells and mice.     

A Sensitive Schiff-Base Fluorescent Chemosensor for the Selective Detection of Zn2+

A Schiff-base fluorescent probe – N, N^/-bis(salicylidene) trans 1, 2 – diaminocyclohexane (H ₂ L) was synthesized and evaluated as a chemoselective Zn²⁺ sensor. Upon treatment with Zn²⁺, the complexation of H ₂ L with Zn²⁺ resulted in a bathochromic shift with a pronounced enhancement in the fluorescence intensity in ethanol solution. Moreover, other common alkali, alkaline earth and transition metal ions failed to induce response or minimal spectral changes. Notably, this chemosensor could distinguish clearly Zn²⁺ from Cd²⁺. The stoichiometric ratio and association constant were evaluated using Benesi – Hildebrand relation giving 1:1 stoichiometry. This further corroborated 1:1 complex formation based on Job’s plot analyses.     

A Rhodamine-Based Off�COn Fluorescent Chemosensor for Selectively Sensing Cu(II) in Aqueous Solution

A novel chromogenic and fluorogenic chemosensor RhB-pMOSal comprising a rhodamine fluorophore and a salicylaldehyde receptor being connected by an iminohydrazine link was synthesized and fully characterized. Its sensing behavior toward various metal ions in neutral aqueous solution was investigated by absorption and fluorescence spectroscopy. RhB-pMOSal exhibited a reversible and sensitive ??turn-on?? response of absorption and fluorescence toward Cu²⁺ in aqueous acetonitrile solution. Approximate 65 and 6-fold enhancement in the absorbance at 556 nm and fluorescence intensity at 573 nm were estimated when equivalent Cu²⁺ was added to the RhB-pMOSal solution. Under the same conditions, RhB-pMOSal displayed more sensitive than a reported analogue RhB-Sal to Cu²⁺ ion. The competition experiments for Cu²⁺ mixed with common metal ions exhibited no obvious change in absorption and emission except Cr³⁺ ion that can induce the fluorescence quenching of RhB-pMOSal to some extent.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

Synthesis and Spectroscopic Properties of Novel Fluorescent Compounds Containing Bis-pyrazole Ring

A series of pyrazoline derivatives containing pyrazole group were synthesized and characterized by means of ¹H NMR, FT-IR, MS and elemental analysis, and their UV–vis absorption behavior and fluorescent properties were also measured. Moreover, the influence of metal ions on spectral properties of synthetic products was examined with compound A ₅ as an example. It has been found that all synthetic pyrazoline derivatives show two remarkable absorption peaks at about 260 and 360 nm and the maximum emission peak at 445–467 nm. Especially, the joined of Co²⁺ can quench the fluorescence of compound A ₅ obviously.     

9, 10-Bis(8-Quinolinoxymethyl)Anthracene—A Fluorescent Sensor for Nanomolar Detection of Cu2+ with Unusual Acid Stability of Cu2+-Complex

In this work, the dipod 9,10-bis(8-quinolinoxymethyl)anthracene (1) and for comparison, monopod 9-(8-quinolinoxymethyl)anthracene (2) have been synthesized. The fluoroionophore 1 in pH 7.1 HEPES buffered CH₃CN:H₂O (4:1 v/v) solution shows quenching only with Cu²⁺ with lowest limit of detection 150 nM, amongst various metal ions. Fluoroionophore 1 could also be applied to sense Co²⁺ with lowest limit of detection 600 nM. By modulating the pH of the solution and concentration of Cu²⁺, 1 shows respective “On-Off-On” and “On-Off” fluorescent switching. The self-assembly of two Cu²⁺ ions and two molecules of fluoroionophore 1 to form closed structure [Cu₂(L)₂]⁴⁺ seems to be responsible for nanomolar sensitivity towards Cu²⁺. The combination of delayed second protonation of 1 (pK_a2?=?2.6) and stepwise protonation of [Cu₂ L ₂]⁴⁺ causes unusual stability of [Cu(LH)₂]⁴⁺ even at pH?<?2.

A Phenylbenzothiazole Derived Fluorescent Sensor for Zn(II) Recognition in Aqueous Solution Through “Turn-On” Excited-State Intramolecular Proton Transfer Emission

A highly selective and sensitive fluorescent Zn²⁺ sensor N-(2-(benzo[d]thiazol-2-yl)phenyl)-2-((pyridin-2-ylmethyl)amino)acetamide (1) that derived from 2-(2′-aminophenyl)benzothiazole has been developed. In aqueous solution (HEPES/CH₃CN=4/6, v/v, HEPES 20 mM, pH?=?7.4), sensor 1 displays highly selective recognition to Zn²⁺ over other metal ions with a distinct longer-wavelength emission enhancement. Sensor 1 binds Zn²⁺ through its amide form with a 1:1 binding stoichiometry, which switched on the excited-state intramolecular proton transfer (ESIPT). Graphical Abstract

A simple 2-(2′-aminophenyl)benzothiazole-based fluorescent “off-on” sensor for Zn²⁺ recognition in HEPES/CH₃CN(4/6, v/v, HEPES 20 mM, pH?=?7.4) solution through switching on ESIPT has been developed.     

Study on spin configuration in photoresponsive iron mixed-valence complexes by Mössbauer spectroscopy

We have investigated magnetic properties in a series of photoresponsive dithiooxalato (dto)-bridged iron mixed-valence complexes, (SP-R)[Fe^IIFe^III(dto)₃] (SP-R = R-substituted pyridospiropyran cation; R = Me, Et, and Pr; abbreviated as 1 ^Me, 1 ^Et, and 1 ^Pr, respectively). As for our previous reports, 1 ^Me and 1 ^Et show two-step succeeding ferromagnetic transitions at T _C?=?25 & 8 K and 22 & 5 K, respectively. However, 1 ^Et has no hysteresis in the magnetic susceptibility, while 1 ^Me undergoes the charge transfer phase transition with thermal hysteresis around 75 K. To elucidate the two-step transitions of them, we measured ⁵⁷Fe Mössbauer spectra of 1 ^Et. The spectra of Fe^II (S?=?2) and Fe^III (S?=?1/2) in the HTP were observed in the magnetically ordered state as well as the paramagnetic state, and revealed that only HTP exists in a temperature range up to 5 K. The result is consistent with that of 1 ^Pr, where one ferromagnetic phase transition occurs at T _C?=?10 K. ⁵⁷Fe Mössbauer spectroscopy is useful to clarify the origin of the succeeding magnetic transition for these systems.