The Smart 2-(2-Fluorobenzoyl)-N-(2-Methoxyphenyl)Hydrazinecarbothioamide Functionalized as Ni(II) Sensor in Micromolar Concentration Level and its Application in Live Cell Imaging

In recent years, fluorescent probes for the detection of environmentally and biologically important metal cations have received extensive attention for designing and development of fluorescent chemosensors. Herein, we report the photophysical results of 2-(2-fluorobenzoyl)-N-(2-methoxyphenyl) hydrazinecarbothioamide (4) functionalized as Ni (II) sensor in micromolar concentration level. Through fluorescence titration at 488 nm, we were confirmed that ligand 4 showed the remarkable emission by complexation between 4 and Ni (II) while it appeared no emission in case of the competitive ions (Cr³⁺, Fe²⁺, Co²⁺, Ba²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cu⁺, Cs⁺). Furthermore, ligand 4 exhibited no toxicity with precise cell permeability toward normal living cells using L929 cell lines in bio imaging experiment investigated through confocal fluorescence microscope. The non-toxic behavior of ligand 4 (assessed by MTT assay) and its ability to track the Ni²⁺ in living cells suggest its possibility to use in biological system as nickel sensor.

Selective Fluorescent Detection of Aspartic Acid and Glutamic Acid Employing Dansyl Hydrazine Dextran Conjugate

Highly water soluble polymer (DD) was prepared and evaluated for its fluorescence response towards various amino acids. The polymer consists of dansyl hydrazine unit conjugated into dextran template. The conjugation enhances higher water solubility of dansyl hydrazine moiety. Of screened amino acids, DD exhibited selective fluorescence quenching in the presence of aspartic acid (Asp) and glutamic acid (Glu). A plot of fluorescence intensity change of DD against the concentration of corresponding amino acids gave a good linear relationship in the range of 1?×?10^?4 M to 25?×?10^?3 M. This establishes DD as a potential polymeric sensor for selective sensing of Asp and Glu.

A Schiff-Based Colorimetric Fluorescent Sensor with the Potential for Detection of Fluoride Ions

A simple Schiff-based colorimetric fluorescent receptor 1 was prepared. It exhibits a “turn-on-type” mode with high sensitivity in the presence of F^?. The change in color is very easily observed by the naked eye in the presence of F^?, whereas other anions do not induce such a change. Job plot indicated a 1:2 complexation stoichiometry between receptor 1 and F^?. The association constant for 1-F^? in CH₃CN was determined as 1.32*10⁵ M^?2 by a Hill plot.

Study on the Selectivity of Anion Receptors Based on Similar (thio)urea Fragments

Three new selective anion receptors containing the (thio)urea binding sites were developed, Indole-3-formaldehyde phenyl-semithiocarbazone, Indole-3-formaldehyde nitrophenyl-semithiocarbazone, and Indole-3-formaldehyde nitrophenyl-semicarbazone, nominated as receptors 1, 2 and 3, respectively. Receptor 1 shows high selective recognition for F^? only, while both receptor 2 and receptor 3 containing a p-nitro group show high selective recognition for AcO^?. The high selective recognition of these receptors to anions is further investigated by X-ray crystallography diffraction, UV-vis, fluorescence analyses and ¹H NMR. Furthermore, receptor 2 changes from yellow to orange, and receptor 3 darkens when acetate is added, providing a way of detection by ‘naked-eye’.     

Urea Based Dipodal Fluorescence Receptor for Sensing of Fe3+ Ion in Semi-Aqueous Medium

Urea based fluorescent chemosensor 1 was synthesized. Receptor 1 shows unique selectivity for the Fe³⁺ion and no such significant response was noticed with other metal ions (Cr³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Bi³⁺) in DMSO/H₂O (50:50,v/v) semi-aqueous solution. The binding features have been established by absorption and fluorescence spectroscopic methods. The binding constant (K) values obtained from Benesi-Hildebrand, Scatchard and Connor plot for receptor 1 is (8.3?±?0.3) × 10³ M^?1 and has good detection limit 0.7?μM. The stoichiometry of 1.Fe³⁺ complex was confirmed by mass spectroscopy and Job’s plot.

Interaction Mechanism of Trp-Arg Dipeptide with Calf Thymus DNA

The interaction between Trp-Arg dipetide (WR) and calf thymus DNA (ctDNA) in pH 7.4 Tris-HCl buffer was investigated by multi-spectroscopic techniques and molecular modeling. The fluorescence spectroscopy and UV absorption spectroscopy indicated that WR interacted with ctDNA in a minor groove binding mode and the binding constant was 4.1?×?10³. The ionic strength effect and single-stranded DNA (ssDNA) quenching effect further verified the minor groove binding mode. Circular dichroism spectroscopy (CD) was employed to measure the conformation change of ctDNA in the presence of WR. The molecular modeling results illustrated that electrostatic interaction and groove binding coexisted between them and the hydrogen bond and Van der Waals were main acting forces. All the above methods can be widely used to investigate the interaction of peptide with nucleic acids, which contributes to design the structure of new and efficient drugs.

Bis-Benzimidazolyl Diamide Based Fluorescent Probe for Copper(II): Synthesis, Structural and Fluorescence Studies

A new fluorescent probe based on a bis-benzimidazole diamide N ²,N ^2′-bis[(1-ethyl-benzimidazol-2-yl)methyl]biphenyl-2,2′-dicarboxamide ligand L ₁ with a biphenyl spacer group and a Copper(II) trinuclear metallacycle has been synthesized and characterized by X-ray single crystallography, elemental and spectral (FT-IR, ¹H & ¹³C NMR, UV-Visible) analysis. The fluorescence spectra of L ₁ in MeOH show an emission band centered at 300 nm. This band arises due to benzimidazolyl moiety in the ligating system. The diamide L ₁ in the presence of Cu²⁺ show the simultaneous ‘quenching’ of (300 nm) and ‘enhancement’ of (375 nm) emission band. Similar fluorescence behavior was found in water–methanol mixture (9:1). The new emission band at 375 nm is attributed to intra ligand π–π* transition of the biphenyl moiety. L ₁ exhibited high selectivity and sensitivity towards Cu²⁺ in both the medium over other common metal ions like Ni²⁺, Co²⁺, Mn²⁺, Mg²⁺, Zn²⁺, Pb²⁺ and Hg²⁺. The binding constant with Cu²⁺ was calculated by the Benesi-Hildebrand equation. Selective “off-on-off” behavior of L ₁ in methanol has also been studied. The fluorescent intensity of 375 nm bands in L ₁ enhances (turns-on) upon addition of Cu²⁺ and quenches (turn-off) upon addition of Na₂-EDTA.     

Spectroscopic and Computational Study of a Naphthalene Derivative as Colorimetric and Fluorescent Sensor for Bioactive Anions

The anion recognition property of a naphthalene based receptor (L) was investigated by naked-eye, UV-Vis, fluorescence, ¹H NMR and computational methods. The receptor L showed fluoride selective naked-eye detectable colorimetric and UV-Vis spectral changes over other tested anions due to the formation of hydrogen bonding complex in 1:1 stoichiometry and/or deprotonation between fluoride and the receptor. Interestingly, the fluorescence of L was quenched by fluoride but enhanced by acetate.     

Indole-based Fluorescent Sensors for Selective Detection of Hg2+

A series of indole-based fluorescent chemosensors 1–4 were prepared and investigated characteristick features with transition metal ions. Sensors 1 and 2 were selective for Hg²⁺ ion among a series of metal ions in H₂O–DMSO with association constants of 4.60×10⁴ and 5.90×10⁴?M^?1 and detection limits of 140 and 101.6 μM, respectively.

Sensing of Zn2+ion by N-Furfurylsalicylaldimine Based on CHEF Process†

The recognition ability of N-Furfurylsalicylaldimine (HL) toward various cations (Pb²⁺, Hg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺, K⁺, Sr²⁺, and Na⁺) has been studied by UV–Vis and fluorescence spectroscopy. The compound showed highly selective fluorescence signaling behaviour for Zn²⁺ ions in methanol-water medium based on CHEF process and is capable of distinguishing Zn²⁺ from Cd²⁺ ion. From single crystal X-ray analysis it is revealed that a Zn²⁺ ion binds two ligand molecules through imine nitrogen and phenolate oxygen atom.

9, 10-Bis(8-Quinolinoxymethyl)Anthracene—A Fluorescent Sensor for Nanomolar Detection of Cu2+ with Unusual Acid Stability of Cu2+-Complex

In this work, the dipod 9,10-bis(8-quinolinoxymethyl)anthracene (1) and for comparison, monopod 9-(8-quinolinoxymethyl)anthracene (2) have been synthesized. The fluoroionophore 1 in pH 7.1 HEPES buffered CH₃CN:H₂O (4:1 v/v) solution shows quenching only with Cu²⁺ with lowest limit of detection 150 nM, amongst various metal ions. Fluoroionophore 1 could also be applied to sense Co²⁺ with lowest limit of detection 600 nM. By modulating the pH of the solution and concentration of Cu²⁺, 1 shows respective “On-Off-On” and “On-Off” fluorescent switching. The self-assembly of two Cu²⁺ ions and two molecules of fluoroionophore 1 to form closed structure [Cu₂(L)₂]⁴⁺ seems to be responsible for nanomolar sensitivity towards Cu²⁺. The combination of delayed second protonation of 1 (pK_a2?=?2.6) and stepwise protonation of [Cu₂ L ₂]⁴⁺ causes unusual stability of [Cu(LH)₂]⁴⁺ even at pH?<?2.

New Water Soluble Terphenylene Diethynylene Fluorophores

Inspired by our earlier works on sensors from dendritic phenyleneethynylenes, two new star-shaped water-soluble fluorophores containing terphenylene diethynylene units and anionic carboxylate peripheries are successfully synthesized. The convergent synthesis relies on Sonogashira cross-coupling reactions between tris-(4-ethynylphenyl)amine and the iodophenyleneethynylene branches. All of the compounds are characterized by ¹H, ¹³C NMR, and mass spectrometry. In aqueous solution, the less polar fluorophore 1 shows lower quantum yield than 2 (18 vs 33 %) as a result of hydrophobic induced aggregation. One of these anionic water-soluble fluorophores exhibits a selective fluorescence quenching by Fe³⁺ ion in phosphate buffer pH 8.     

A Novel Ratiometric Fluorescent Mercury Probe Based on Deprotonation-ICT Mechanism

A new NBD-rhodamine dye (1) was developed as a colorimetric and ratiometric fluorescent chemosensor for Hg²⁺ with good selectivity in aqueous ethanol solutions under neutral to basic conditions. Sensor 1 showed absorption at 468 nm and a weak emission at 529 nm (? _F ?=?0.063) in ethanol/aqueous tris buffer (9:1, v/v) of pH 9.17 solution. Bathochromic shifts in both absorption (492 nm) and fluorescence spectra (569 nm, ? _F ?=?0.129), respectively upon addition of 2 equiv. of Hg²⁺ were observed. The ring-opening reaction of the spirolactam form to the corresponding xanthene form was not found. The interaction of Hg²⁺ with chemosensor 1 resulted in the deprotonation of the secondary amine conjugated to the NBD component so that the electron-donating ability of the N atom was enhanced. Deprotonation-ICT mechanism of secondary amines was suggested for the ratiometric fluorescent chemosensing for Hg²⁺.     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.     

New Application of a Known Molecule: Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff Base as a Colorimetric and Fluorescent “Off-On” Probe for Copper (II)

Rhodamine B 8-hydroxy-2-quinolinecarboxaldehyde Schiff base (1) has been investigated as a colorimetric and fluorescent “off-on” probe for the recognition of Cu²⁺ in aqueous solution. Probe 1 was synthesized by condensation of rhodamine B hydrazide and 8-hydroxy-2-quinolinecarboxaldehyde, which exhibited good selectivity for Cu²⁺ among a range of biologically and environmentally important metal ions. The Cu²⁺ recognition event undergoes a Cu²⁺ promoted hydrolysis of probe 1 to release rhodamine B and the recognition process is barely interfered by other coexisting metal ions.

The First Bifluoride Sensor Based on Fluorescent Enhancement

The first fluorescent sensor for HF₂ ^? anion, N¹, N³-di(naphthalene-1-yl)isophthalamide (L) has been derived from α-Napthylamine and isopthaloyl chloride. In 1:1 (v/v) DMSO:H₂O, L exhibits high selectivity towards HF₂ ^? anion with a 4-fold enhancement in fluorescent intensity. Very little enhancement in fluorescence intensity is observed for F^?, Cl^?, Br^?, I^?, SCN^?, PO₄ ^3?, SO₄ ^2?, and CH₃COO^? anions. The stoichiometry interaction between L and HF₂ ^? is found to be 1:1 from fluorescence and UV/Visible spectral data. DFT calculation shows that binding between HF₂ ^? and L is 1:1 and increases the relative planarity between the two naphthyl rings causing fluorescence enhancement. A shift of 0.080 V in oxidation potential of L is observed on interaction with HF₂ ^? by cyclic voltammetry and square wave voltammetry.     

Neutral and anionic duality of 1,2,4-triazole α-amino acid scaffold in 1D coordination polymers

A tiny supramolecular synthon, 4H-1,2,4-triazol-4-yl acetic acid (HGlytrz) which is bifunctional by design having an electronic asymmetry and conformational flexibility has been introduced to synthesize iron(II) complexes. Having 1,2,4-triazole or carboxylic extremities on the same framework HGlytrz could display dual functionality by acting as a neutral as well as anionic ligand based on the possibility of deprotonation of carboxylic group. Four new iron(II) HGlytrz complexes with ClO $_{4}^{-}$ (1), NO $_{3}^{-}$ (2), BF $_{4}^{-}$ (3) and CF₃SO $_{3}^{-}$ (4) anions were prepared. Formulation of their composition which is complicated due to ligand deprotonation is discussed. Unlike its ester protected counterpart ethyl-4H-1,2,4-triazol-4-yl-acetate (αGlytrz) which show hysteretic room temperature spin crossover, 1–4 remain in the high-spin state as revealed by ⁵⁷M?ssbauer spectroscopy. Prospects of such 1D coordination polymers with dangling unbounded carboxylic entities in the realm of self-assembled monolayer (SAM) are discussed.     

Morphological Effect on Fluorescence Behavior of Silver Nanoparticles

Effect of Silver nanoparticles (AgNPs) morphology on their fluorescence behavior is reported. AgNPs sol stabilized by Ethylene Diamine Tetra Acetic-Acid (EDTA) was prepared by chemical reduction method. Morphology of the AgNPs was tuned through changing the Ag⁺ ion concentration and P^H of reaction mixture. Additional peaks observed in surface Plasmon resonance spectra suggest the an-isotropic nature of AgNPs. Actual morphology was judged by Transmission Electron Microscopy. Emission spectra recorded using Spectrofluoremeter suggest the fluorescent nature of AgNPs, which also influenced by morphology of AgNPs and attributed to the variation in surface structure of an-isotropic AgNPs.

Detection of HSO4 − Ion Based on the Hydrolysis of Diketopyrrolopyrrole-derived Schiff Base with Chromogenic and Fluorogenic Dual Signals

A new diketopyrrolopyrrole-based Schiff base L was synthesized and its anion sensing behavior was explored. L showed exclusive response toward HSO₄ ^? ion and also distinguished HSO₄ ^? from other anions by color changes (from dark red to orange) and 21 fold fluorescence enhancement at 370 nm in aqueous solution (THF/H₂O?=?8/1, v/v). The sensing mechanism was suggested to proceed via a hydrolysis process. The results provided colorimetric and fluorimetric assays to selectively detect the presence of a HSO₄ ^? over a wide range of other interfering anions. The results could potentially be used as a dual colorimetric-fluorescent probe for monitoring HSO₄ ^? levels in physiological and environmental systems.     

A New Thiophenyl Pyrazoline Fluorescent Probe for Cu2+ in Aqueous Solution and Imaging in Live Cell

A new thiophenyl pyrazoline probe for Cu²⁺ in aqueous solution was synthesized and characterized by IR, NMR, HRMS and X-ray analysis. The probe displays remarkably high selectivity and sensitivity for Cu²⁺ with a detection limit of 1.919?×?10^?7 M in aqueous solution (EtOH:HEPES = 1:1, v/v, 0.02 M, pH?=?7.2). In addition, the probe is further successfully used to image Cu²⁺ in living cells and the probe possesses good reversibility.