首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
In order to verify the anti-UV aging mechanism about polypropylene-grafting-acrylonitrile (PP-g-AN) to polypropylene (PP), the structural analysis of the PP/PP-g-AN blend before and after aging was carried out via the X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectrometry (FTIR) and UV-visible Absorbance Spectrum (UV–Vis). Inference on PP-g-AN anti-aging process was proposed and confirmed.  相似文献   

2.
Cyclocondensation reaction of 3-hydrazinyl-2-naphthoic acid with diphenyl-N-cyanoimidocarbonate furnished the target 2-phenoxy-benzo[g][1,2,4]triazolo[1,5-a]quinazolin-5(4H)-one (1) in high yield. Alkylation, thionation and chlorination of the lactam group in the compound 1 produced a variety of derivatives 2–17. Their structures were characterized by NMR and HREI-MS analyses.  相似文献   

3.
Nanoparticles including starch-graft-methylmethacrylate, starch-graft-(methylmethacrylate/methyl acrylate), starch-graft-(methyl methacrylate/butyl methacrylate) were synthesized via emulsifier-free emulsion polymerization and were blended with natural rubber latex at various mass ratios. Chemical structure of graft copolymers was confirmed by Fourier transform infrared. Transmission electron microscopy demonstrated the core-shell structures of the nanoparticles distributed uniformly around the natural rubble particles. The tensile strength of blend films was significantly enhanced by addition of graft copolymers. Besides, scanning electron microscopy and atomic force microscopy showed the blend film had smooth surface.  相似文献   

4.
Phase state and morphological features of solutions of cellulose blends with rigid-chain thermotropic LC copolyesters and isotropic poly(m-phenyleneisophthalamide) in the highly polar donor solvent N-methylmorpholine-N-oxide are studied by DSC and polarization microscopy. The ternary phase diagram for the cellulose-copolyesters-N-methylmorpholine-N-oxide system is constructed. Rheological characteristics of the prepared solutions are studied using capillary and rotary rheometers under the regimes of continuous and periodic shear deformation. Rheological characteristics of cellulose solutions with copolyesters in N-methylmorpholine-N-oxide with their different phase states are shown to change in accordance with the traditional mechanism of flow for solutions with high specific interactions between their components. However, the character of the rheological behavior of mixtures of cellulose with poly(m-phenyleneisophthalamide) in N-methylmorpholine-N-oxide primarily stems from structural-morphological transformations in solutions taking place upon deformation.  相似文献   

5.
A new series of copolymers of poly(m-toluidine-co-m-aminoacetophenone) were synthesized by the chemical oxidative method in acid medium. The copolymers were characterized by UV–Vis and FTIR spectroscopy. X-ray diffraction analysis revealed the partial crystalline nature of copolymer. The morphological study by SEM analysis indicated that the surface of the copolymer had the granular structure of agglomerated morphology with average particle size of 200 nm. The conductivity of the copolymers ranged from 2 × 10–4 to 3.3 × 10–8 S/cm and the conductivity decreased with the increase of comonomer concentration. The resultant copolymers showed an enhanced solubility and an improved processability when compared with pure polyaniline.  相似文献   

6.
The copolymerization of ethylene with propylene in the liquid propylene initiated by ansa-metallocenes of the C 1 symmetry, rac-[1-(9-η5-fluorenyl)-2-(5,6-cyclopenta-2-methyl-1-η5-indenyl)ethane]zirconium dichloride and rac-[1-(9-η5-fluorenyl)-2-(5,6-cyclopenta-2-methyl-1-η5-indenyl)ethane]hafnium dichloride, activated by methylaluminoxane has been studied. Triisobutylaluminum has been used as a cocatalyst. The propylene-ethylene copolymers thus prepared contain 5–60 mol % ethylene units. The reactivity ratios have been measured. In the case of the zirconocene-based catalyst, the molecular mass of the copolymers decreases with an increase in the content of ethylene units. The reverse situation is observed in the case of the hafnocene-based catalytic system. The copolymers are characterized by the low T g values (down to ?45°C). Incorporation of a small amount of ethylene units (5 mol %) results in a rise in the elastomeric behavior of the polymers.  相似文献   

7.
Determination of the characteristics of native starches is crucial in order to select their best application in various industrial fields. Thus, two different types of non-traditional native starches from the Dioscoreaceas species (Dioscorea sp. and Dioscorea piperifolia Humb. var. Wild) were studied regarding their thermal, structural and rheological properties. The results were contrasted with traditional commercial starch sources (potato, cassava and corn). From the thermogravimetric results (TG/DTG), D. piperifolia starch obtained the highest thermal stability of the samples, except for potato starch. Furthermore, using differential scanning calorimetry and viscoamylograph profiles (RVA), it was found that the Dioscoreaceas starches presented a higher onset (T o) temperature and susceptibility to retrogradation. They also showed lower values in relation to relative crystallinity, which was calculated from their X-ray patterns and tendency to white (L*) colour. The shapes of the Discoreaceas starch granules were determined using electron microscopy; it was found that as the potato starch the Dioscoreaceas starches showed a wide range of particle size.  相似文献   

8.
A series of PEO45-b-PtBA53-b-PS x (x = 42, 84, 165) triblock terpolymers were synthesized by the atom transfer radical polymerization and characterized by size exclusion chromatography and 1H NMR. Their self-assemblies were conducted by a two-step hierarchical self-assembly method and a one-step dialysis method and the self-assembly behaviors were investigated. The morphologies, sizes, and size distributions of micelles produced by the self-assembly were determined by transmission electron microscopy and dynamic light scattering. The secondary self-assembled structure of PEO45-b-PtBA53-b-PS x obtained by the two-step hierarchical self-assembly could be controlled by tuning the length of PS block, the core forming block. The micelles were uniform with diameters of 20–25 nm and their size distributions, except for that of PEO45-b-PtBA53-b-PS165, were narrow with particle size distribution indexes ranging from 0.014 to 0.246. The one-step dialysis of the triblock terpolymers produced vesicular micelles with distinct vesicle walls that exhibited similar thicknesses. The vesicles did not show significant aggregation. The size distribution of PEO45-b-PtBA53-b-PS42 vesicle was the narrowest with a particle size distribution index value of 0.135. The PEO45-b-PtBA53-b-PS165 vesicles tended to overlap with each other.  相似文献   

9.
The aim of this study was to design a robust parameter identification algorithm to characterize the effect of gene deletion on Escherichia coli (E. coli) MG1655. Two genes (pta and poxB) in the competitive pathways were deleted from this microorganism to inhibit pyruvate consumption. This condition deviated the E. coli metabolism toward the Krebs cycle. As a consequence, the biomass, substrate (glucose), lactic, and acetate acids as well as ethanol concentrations were modified. A hybrid model was proposed to consider the effect of gene deletion on the metabolism of E. coli. The model parameters were estimated by the application of a least mean square method based on the instrument variable technique. To evaluate the parametric identifier method, a set of robust exact differentiators, based on the super-twisting algorithm, was implemented. The hybrid model was successfully characterized by the parameters obtained from experimental information of E. coli MG1655. The significant difference between parameters obtained with wild-type strain and the modified (with deleted genes) justifies the application of the parametric identification algorithm. This characterization can be used to optimize the production of different byproducts of commercial interest.  相似文献   

10.
9-Diazofluoren adds in Et2O at 20°C to methyltetrolate in keeping with Auwers rule and nonregioselectively adds to methyl-3-phenylpropiolate with the formation of spirocyclic 3H-pyrazoles. The methyltetrolate adduct at boiling in toluene converts into methyl 3a-methyl-3aH-dibenzo[e,g]indazole-3-carboxylate, at 190°C in benzene, into methyl 3-methyl-2H-dibenzo[e,g]indazole-2-carboxylate, and at 160°C in methanol, into 3-methyl-2H-dibenzo[e,g]indazole. Auwers adduct of methyl 3-phenylpropiolate at boiling in benzene gives cyclopropene derivative and at boiling in methanol isomerizes into methyl 3a-phenyl-3aHdibenzo[e,g]indazole-3-carboxylate. Anti-Auwers adduct at boiling in benzene isomerizes into methyl 2-phenylpyrazolo[1,5-f]phenanthridine-3-carboxylate.  相似文献   

11.
(S)-Asparagine and (S)-glutamine ortho-carboranyl derivatives with free amino and carboxy groups in the α-position were synthesized. By an example of N γ-(1,2-dicarba-closo-dodecarboran-3-yl)-(S)-glutamine it was demonstrated that the developed synthetic approach carboranyl derivatives of amino acids allowed the preparation of optically pure isomers.  相似文献   

12.
Linear ABC triblock copolymer PtBA154-b-PS300-b-P2VP240 was successfully synthesized by RAFT polymerization. Block copolymer micelles were prepared by the two-step hierarchical self-assembly process. Size exclusion chromatography and 1H NMR were used to characterize the structure of samples. Morphologies and size of micelles were determined by transmission electron microscope. The results showed that the densely dispersed spherical micelles of PtBA154-b-PS300-b-P2VP240 were obtained in the first step of the hierarchical self-assembly process. In the second step, core-compartmentalized micelle strings with different lengths and distribution densities were obtained when the primary self-assembled solution was dialyzed in distilled water with pH ≈ 3. When distilled water with pH ≈ 3 was added drop-wise to this solution, uniformly dispersed spherical core-compartmentalized micelles of PtBA154-b-PS300-b-P2VP240 were prepared. Thus, hierarchical self-assembly structure of linear ABC triblock copolymer was obtained successfully and the preparation of uniformly dispersed spherical micelles of triblock copolymers was realized simply by changing the secondary self-assembly methods.  相似文献   

13.
Hydroxymercuration-demercuration of N-p-tolysulfonyl-4,4a,9,9a-tetrahydro-3H-carbazoles and N-p-tolyl(or methyl)sulfonyl-1,3a,4,8b-tetrahydrocyclopenta[b]indoles leads to the formation of the corresponding N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-2-ols and N-p-tolyl(or methyl)sulfonyl-1,2,3,3a,4,8b-hexahydrocyclopenta[b]indol-2-ols. The latter are oxidized to 2-oxo derivatives with potassium dichromate. The oxidation of 2-methoxy-8-methyl-N-p-tolylsulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-ol under analogous conditions gives 2-methoxy-8-methyl-N-p-tolysulfonyl-2,3,4,4a,9,9a-hexahydro-1H-carbazol-1-one.  相似文献   

14.

Background

Under iron-deficient conditions, Chlamydomonas exhibits high affinity for iron absorption. Nevertheless, the response, transmission, and regulation of downstream gene expression in algae cells have not to be investigated. Considering that the MAPK pathway is essential for abiotic stress responses, we determined whether this pathway is involved in iron deficiency signal transduction in Chlamydomonas.

Results

Arabidopsis MAPK gene sequences were used as entry data to search for homologous genes in Chlamydomonas reinhardtii genome database to investigate the functions of mitogen-activated protein kinase (MAPK) gene family in C. reinhardtii under iron-free conditions. Results revealed 16 C. reinhardtii MAPK genes labeled CrMAPK2CrMAPK17 with TXY conserved domains and low homology to MAPK in yeast, Arabidopsis, and humans. The expression levels of these genes were then analyzed through qRT-PCR and exposure to high salt (150 mM NaCl), low nitrogen, or iron-free conditions. The expression levels of these genes were also subjected to adverse stress conditions. The mRNA levels of CrMAPK2, CrMAPK3, CrMAPK4, CrMAPK5, CrMAPK6, CrMAPK8, CrMAPK9, and CrMAPK11 were remarkably upregulated under iron-deficient stress. The increase in CrMAPK3 expression was 43-fold greater than that in the control. An RNA interference vector was constructed and transformed into C. reinhardtii 2A38, an algal strain with an exogenous FOX1:ARS chimeric gene, to silence CrMAPK3. After this gene was silenced, the mRNA levels and ARS activities of FOX1:ARS chimeric gene and endogenous CrFOX1 were decreased. The mRNA levels of iron-responsive genes, such as CrNRAMP2, CrATX1, CrFTR1, and CrFEA1, were also remarkably reduced.

Conclusion

CrMAPK3 regulates the expression of iron-deficiency-responsive genes in C. reinhardtii.
  相似文献   

15.
N-Metallation of bromoanilines with ethylmagnesium bromide followed by a reaction with trimethylchlorosilane provided N-mono and N-bis(trimethylsilyl)bromoanilines depending on the structure of substrate. The metallation of bissilylated bromoanilines with butyllithium permitted the introduction of a trimethylsilyl substituent in the aromatic ring. Previously unknown 2-bromo-N,N-bis(trimethylsilyl)aniline, 2,6-dibromo-N-trimethylsilylaniline, 2,6-dibromo-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilylaniline, 2-bromo-6-trimethylsilyl-N,N-bis(trimethylsilyl)aniline, 2-bromo-6-trimethylsilyl-N-trimethylsilylaniline, 2,4,6-tribromo-N-trimethylsilylaniline, and 2,4,6-tribromo-N,N-bis(trimethylsilyl)aniline were prepared. The structures of the compounds obtained were established by the chromato-mass spectrometry and 1H, 13C, and 29Si NMR spectroscopy.  相似文献   

16.
Poly(lactic acid) (PLA)/poly(butylene adipate-co-terephthalate) (PBAT) blends were prepared using melt processing. The effects of maleic anhydride grafted PLA (PLA-g-MA) and calcium carbonate (CaCO3) content on mechanical, thermal, and morphological properties of the blends were investigated. PLA-g-MA was synthesized by varying monomer and initiator contents using a reactive melt-grafting process. Tensile properties of PLA/PBAT blend were enhanced with adding 2 phr of PLA-g-MA. SEM micrographs exhibited the improvement of interfacial adhesion between PLA and PBAT in the compatibilized blend. Moreover, thermal stability of the blends improved with presence of PLA-g-MA. With increasing CaCO3 content, Young’s modulus of the composites increased.  相似文献   

17.
In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T f = 19.74–5.59 °C; T m = 18.34–33.80 °C) and latent heats (ΔH f = 176.8 J g?1; ΔH m = 189.3 J g?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.  相似文献   

18.
In this study,the maleic anhydride(MAH)and styrene(St)dual monomers grafted polypropylene(PP)and poly[styrene-b-(ethylene-co-butylene)-b-styrene](SEBS),i.e.PP-g-(MAH-co-St)and SEBS-g-(MAH-co-St)are prepared as multi-phase compatibilizers and used to compatibilize the PA6/PS/PP/SEBS(70/10/10/10)model quaternary blends.Both PS and SEBS are encapsulated by the hard shell of PP-g-(MAH-co-St)in the dispersed domains(about 2μm)of the PA6/PS/PP-g-(MAH-co-St)/SEBS(70/10/10/10)quaternary blend.In contrast,inside the dispersed domains(about 1μm)of the PA6/PS/PP/SEBS-g-(MAH-co-St)(70/10/10/10)quaternary blend,the soft SEBS-g-(MAH-co-St)encapsulates both the hard PS and PP phases and separates them.With increasing the content of the compatibilizers equally,the morphology of the PA6/PS/(PP+PP-g-(MAH-co-St))/(SEBS+SEBS-g-(MAH-co-St))(70/10/10/10)quaternary blends evolves from the soft(SEBS+SEBS-g-(MAH-co-St))encapsulating PS and partially encapsulating PP(about 1μm),then to PS exclusively encapsulated by the soft SEBS-g-(MAH-co-St)and then separated by PP-g-(MAH-co-St)inside the smaller domains(about 0.6μm).This morphology evolution has been well predicted by spreading coefficients and explained by the reaction between the matrix PA6 and the compatibilizers.The quaternary blends compatibilized by more compatibilizers exhibit stronger hierarchical interfacial adhesions and smaller dispersed domain,which results in the further improved mechanical properties.Compared to the uncompatibilized blend,the blend with both 10 wt%PP-g-(MAH-co-St)and 10 wt%SEBS-g-(MAH-co-St)has the best mechanical properties with the stress at break,strain at break and impact failure energy improved significantly by 97%,71%and 261%,respectively.There is a strong correlation between the structure and property in the blends.  相似文献   

19.
2-Dimethylamino methylenechromanone 1 reacted with 4H-1,2,4-triazol-3-amine in acetic acid to give only one isolated product which was identified by X-ray study as 6H-chromeno[3,4-e][1,3,4]triazolo[2,3-a]-pyrimidine. The molecular structure of 3, C12H8N4O, was determined to be monoclinic, P21/c, a = 16.3875(5), b = 8.8378(3), c = 13.8392(5) Å, β = 101.190(1)°, V = 1966.22(11) Å3, Z = 8.  相似文献   

20.
R,R-2,3-butanediol (R,R-2,3-BD) was produced by Paenibacillus polymyxa ZJ-9, which was capable of utilizing inulin without previous hydrolysis. The Jerusalem artichoke pomace (JAP) derived from the conversion of Jerusalem artichoke powder into inulin extract, which was usually used for biorefinery by submerged fermentation (SMF), was utilized in solid state fermentation (SSF) to produce R,R-2,3-BD. In this study, the fermentation parameters of SSF were optimized and determined in flasks. A novel bioreactor was designed and assembled for the laboratory scale-up of SSF, with a maximum yield of R,R-2,3-BD (67.90 g/kg (JAP)). This result is a 36.3% improvement compared with the flasks. Based on the same bath of Jerusalem artichoke powder, the total output of R,R-2,3-BD increased by 38.8% for the SSF of JAP combined with the SMF of inulin extraction. Overall, the utilization of JAP for R,R-2,3-BD production was beneficial to the comprehensive utilization of Jerusalem artichoke tuber.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号