Hydration and proton transport in solid solutions based on Ba<Subscript>2</Subscript>CaWO<Subscript>6</Subscript>

Hydrated alkaline-earth metal tungstates Ba₄Ca_{2 + x} W_{2 ? x} O_{12 ? 2x} with perovskite structure were studied by the thermogravimetry, ¹H NMR, IR, and Raman spectroscopy methods. Electrical conductivity and transfer numbers were measured with varying T, \(p_{O_2 } \) and \(p_{H_2 O} \). The solid solutions are capable of reversibly intercalating water and can exhibit high-temperature proton transport. The localization of protons on oxygen results in the appearance of energetically nonequivalent OH groups; a small fraction of protons are present in the form of H₂O and H₃O⁺.     

Differential thermogravimetric curves for a mixture of evaporable and degradable chain oligomers

Since the boiling point of oligomers increases with increasing chain length, differential thermogravimetric (DTG) curves of polymerization products are uniquely related to the molecular mass distribution of the oligomers in the chain length region in which the degradation rate is less than the rate of evaporation. Degradation is manifested by narrow, chain length-invariant peaks of the DTG curves so that they are distinguishable from broad DTG bands due to the evaporation of the mixture of oligomers. The detachment of the terminal groups at a temperature T₁ and main chain scission at T_d > T₁ are accompanied by dimerization of macroradicals, evaporation of the dimers in the T₁ < T < T_d interval, and appearance of the full degradation peak at T ≈ T_d. The pattern of DTG curves based on these concepts has been calculated on the assumption of free convection in the boundary layer and a spatially uniform degradation in the melt. As an example, DTG curves for the products of tetrafluoroethylene polymerization in liquid solutions have been considered.     

A Search for a Direct Relationship Between Chromatographic and Adsorption Data

Shifts of chromatographic peak maxima and centres of gravity have been investigated for different amounts of propane injected on to a chromatographic column in ideal, non-linear chromatography. Specific retention volumes (V _{g (273)}, corrected to the standard temperature, 273.15 K), propane adsorption isotherms, and the first and second derivatives of the isotherms, (da/dp) _T and (d²a/dp²) _T , were determined for samples of active carbon and for different amounts of propane injected on column. Relationships between specific retention volume and the molar differential work of adsorption, A, were calculated on the basis of the propane isotherms and using the retention times of the peak maxima and the centres of gravity of the peaks. The equations obtained, ln V _{g (273)}=f₁(A) and(dW/dA) _{T, F c} = f₂(ln V _{g (273)}), have been used to explain the relationships between (i) chromatographic peak profiles and (ii) the distribution function of pore volumes filled with propane and the molar differential work of adsorption at different column temperatures (303–318 K).     

Azines and azoles: CXXVII. 5-phenyl-7<Emphasis Type="Italic">H</Emphasis>-[1,2,4]triazolo[5,1-<Emphasis Type="Italic">b</Emphasis>][1,3]thiazin-7-ones: Synthesis and structure

Reactions of 1-acylthiosemicarbazides with methyl 3-phenylprop-2-ynoate provide a new one-step procedure for the synthesis of 2-substituted 5-phenyl-7H-[1,2,4]triazolo[5,1-b][1,3]thiazin-7-ones. The product structure was determined on the basis of scalar spin-spin coupling constants ² J(¹H-¹⁵N) and ³ J(¹H-¹⁵N) in the ¹H and ¹⁵N NMR spectra and was proved by X-ray analysis. Methyl 3-phenylprop-2-ynoate reacted with 1-acetylthiosemicarbazide in ethanol in the presence of H₂SO₄ to give 3-methyl-7-phenyl[1,2,4]triazolo[3,4-b]-[1,3]thiazin-5-one as the only product.     

Synthesis,scope, <Superscript>1</Superscript>H and <Superscript>13</Superscript>C spectral assignments of isomeric dibenzofuran carboxaldehydes

Two isomeric dibenzofuran carboxaldehydes, namely 2-methoxydibenzo[b,d]furan-1-carbaldehyde (4) and 2-methoxydibenzo[b,d]furan-3-carbaldehyde (5), were synthesized. Formylation of 2-methoxydibenzo[b,d]furan (3) with α,α-dichloromethyl methyl ether and tin(IV) chloride gave a mixture of aldehydes 4 and 5 in 95 % yield and in a 35:65 ratio. Their ¹H and ¹³C NMR spectral signals were not sufficiently resolved in CDCl₃ solution to achieve their complete assignment, but this was possible in DMSO-d ₆ with the help of 2D-NMR techniques: NOESY for ¹H–¹H interactions and HSQC and HMQC experiments for ¹H–¹³C correlations. These aldehydes were used in the synthesis of novel β-phenylethylamines and NBOMe derivatives, which are undergoing biological evaluation.     

Temperature-dependent AC electrical conductivity,thermal stability and different DC conductivity modelling of novel poly(vinyl cinnamate)/zinc oxide nanocomposites

Thermal analysis on organically modified Ca²⁺-montmorillonite (OMON) and its source materials—octadecylamine (ODA) and Ca²⁺-montmorillonite (Ca²⁺-Mon)—was studied using thermally stimulated current (TSC) technique. The appearance of ρ _MON peak with the T _max = 75 °C shows the ability of the developed TSC system to demonstrate the relaxation effects of dehydration in Ca²⁺-Mon. It appeared within the temperature range of DSC endothermic peak (30–100 °C) where the T _mMON = 58 °C. Segmental motions of ODA chains and structural disruptions in the modifier agent compound produced TSC α _ODA, ρ _ODA and ρ _1ODA peaks that are comparable to thermal transition and endothermic peaks in DSC profile (T _gODA, T _m1ODA and T _m2ODA). The effect of localized motion in ODA chains as revealed by the TSC β_OMON peak (T _max = ?23 °C), however, is absent in the DSC profile of OMON. It shows TSC technique has high sensitivity in detecting various relaxation behaviors at molecular level. More evidences are demonstrated by the ρ _OMON (T _max = 86 °C) and ρ _1OMON (T _max = 105 °C) peak originated from the ODA chains structures. These peaks also confirm the intercalation of the modifier cations inside the Ca²⁺-Mon gallery.     

Synthesis,antifungal and insecticidal activity of novel [1,2,4]triazolo[4,3-<Emphasis Type="Italic">a</Emphasis>]pyridine derivatives containing a sulfide substructure

A series of [1,2,4]triazolo[4,3-a]pyridine derivatives bearing a sulfide substructure was designed, synthesized and characterized via ¹H·NMR, ¹³C·NMR, IR and elemental analyses. Bioassay Results indicated some of the derivatives displayed good fungicidal activity on Rhizoctonia cerealis, moderated insecticidal activity against Plutella xylostella and good insecticidal activity on Helicoverpa armigera. The inhibitory effects of compounds 4g and 4u against Rhizotonia cerealis were 70.9% at 50 μg mL^?1; the IC₅₀ values of compounds 4d and 4s against Plutella xylostella were 43.87 and 50.75 μg mL^?1, respectively. And the IC₅₀ values of compounds 4d, 4q, and 4s on Helicoverpa armigera were 58.3, 77.14 and 65.31 μg mL^?1, respectively, which were better than that of commercial chlorpyrifos (103.77 μg mL^?1).     

Probing the two-stage transition upon crossing the glass transition of polystyrene by solid-state NMR

A two-stage transition upon crossing the glass transition of polystyrene with increasing temperature was precisely determined and interpreted by using solid-state nuclear magnetic resonance(SSNMR), ~1H-~1H dipolar couplings based double quantum-filtered(DQF) and dipolar filter(DF) experiments and ~(13)C chemical shift anisotropy(CSA) based centerband-only detection of exchange(CODEX) experiment are used to fully characterize the time scale of molecular motions during the glass transition. While differential scanning calorimetry(DSC) and CODEX experiment predicted the first stage of glass transiton, DQF and DF experiments provided the evidence for the second stage transition during which the time scale of molecular motions changed from very slow(t ms) to very fast(t μs). The first stage of glass transition begins with the occurrence of remarkable slow re-orientation motions of the polymer backbone segments and ends when the degree of slow motion reaches maximum. The onset and endpoint of the conventional calorimetric glass transition of polystyrene can be quantitatively determined at the molecular level by SSNMR. In the second stage, a subsequent dramatic transition associated with the melting of the glassy components was observed. In this stage liquid-like NMR signals appeared and rapidly increased in intensity after a characteristic temperature T_f(~1.1T_g). The signals associated with the glassy components completely disappeared at another characteristic temperature T_c(~1.2T_g).     

Crystal structures of <Emphasis Type="Italic">trans</Emphasis>-[Re<Subscript>6</Subscript>S<Subscript>8</Subscript>(CN)<Subscript>2</Subscript>L<Subscript>4</Subscript>] complexes,L = pyridine or 4-methylpyridine

The structures of three novel octahedral rhenium cluster compounds [Re₆S₈(CN)₂(py)₄]·H₂O (1), [Re₆S₈(CN)₂(4-Mepy)₄] (2), [Re₆S₈(CN)₂(4-Mepy)₄]·4-Mepy (3) (py = pyridine, 4-Mepy = 4-methylpyridine) are determined by X-ray crystallography. Crystal data are: C2/m space group, a = 14.813(1) Å, b = 14.772(1) Å, c = 9.2122(6) Å, β = 119.085(2)°, V = 1761.7(2) ų, d _x = 3.318 g/cm³, R = 0.0585 (1); I4₁/amd space group, a = 16.0018(3) Å, c = 14.7186(5) Å, V = 3768.81(16) ų, d _x = 3.169 g/cm³, R = 0.0489 (2); P2₁/c space group, a = 9.0452(4) Å, b = 15.8065(7) Å, c = 15.2951(6) Å, β = 103.700(2)°, V = 2124.57(16) ų, d _x = 2.957 g/cm³, R = 0.0245 (3). Molecular cluster complexes interact via π-π stacking affording 3D frameworks in 1 and 2 and chains in 3.     

Crystal structure of KPb<Subscript>2</Subscript>Cl<Subscript>5</Subscript> and KPb<Subscript>2</Subscript>Br<Subscript>5</Subscript>

The KPb₂Cl₅ and KPb₂Br₅ crystals are monoclinic (P2₁/c) with a microtwinned structure. X-ray analysis of chloride resulted in the parameters a = 8.854(2) Å, b = 7.927(2) Å, c = 12.485(3) Å; β = 90.05(3)°, d_calc = 4.78(1) g/cm³ (STOE STADI4, MoK_α, 2θ_max = 80°), R₁ = 0.0702 for 4094 F ≥ 4 σ(F) reflections. For bromide, a = 9.256(2) Å, b = 8.365(2) Å, c = 13.025(3) Å; β = 90.00(3)°, d_calc = 5.62(1) g/cm³ (Bruker P4, MoK_α, 2θ_max = 70°), R₁ = 0.0692 for 3076 F ≥ 4 (F) reflections.     

Biodegradable poly(butylene succinate-<Emphasis Type="Italic">co</Emphasis>-butylene dimerized fatty acid)s: Synthesis,crystallization, mechanical properties,and rheology

Poly(butylene succinate-co-butylene dimerized fatty acid) (P(BS-co-BDFA)) copolyesters were synthesized from succinic acid (SA) and dimerized fatty acid (DFA) with 1,4-butanediol (BDO) through a two-step process of esterification and polycondensation. The polyester compositions and physical properties of copolyesters were investigated by GPC, ¹H NMR and ¹³C NMR, DSC, WAXD, DMA, TGA, tensile and rheology test. The melting temperature (T_m), and crystallization temperature (T_c) decreased gradually as the content of DFA monomer increased. P(BS-co-BDFA) copolyesters showed the same crystal structure as the PBS homopolyester. Besides, TGA results indicated that P(BS-co-BDFA)s were of higher thermal stabilities. Moreover, it was found that the synthesized P(BS-co-BDFA)s showed the maximum elongation at break (591%) as the DFA contents were 10 mol%. Rheology analysis indicated that the viscoelastic behavior of the polyesters greatly depended on the molecular weight of polyesters.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Spectroscopic characterization,X-ray structure and DFT studies on 4-[3-(2,5-dimethylphenyl)-3-methylcyclobutyl]-N-methylthiazol-2-amine

The titled molecule 4-[3-(2,5-dimethylphenyl)-3-methylcyclobutyl]-N-methylthiazol-2-amine (C₁₇H₂₂N₂S) is synthesized and characterized by ¹H NMR, ¹³C NMR, IR, and X-ray single crystal determination. The compound crystallizes in the monoclinic space group P2_1/c with a = 6.3972(4) Å, b = 9.4988(6) Å, c = 26.016(2) Å and β = 93.496(7)°. In addition to the molecular geometry from the X-ray determination, vibrational frequencies and gauge, including the atomic orbital (GIAO), ¹H and ¹³C NMR chemical shift values of the titled compound in the ground state are calculated using the density functional (B3LYP) method with 6-31G(d), 6-31++G(d,p) and 6-311+G(2d,p) basis sets. The calculated results show that the optimized geometries can well reproduce the crystal structure. Moreover, the theoretical vibrational frequencies and chemical shift values show good agreement with the experimental values. The predicted nonlinear optical properties of the titled compound are greater than those of urea. DFT calculations of the molecular electrostatic potentials and frontier molecular orbitals of the titled compound are carried out at the B3LYP/6-31G(d) level of theory.     

Steric structure of alkyl 2-aryl(hetaryl)hydrazono-3-fluoroalkyl-3-oxopropionates

Steric structure of fluorinated 2-arylhydrazono-3-oxo esters was studied by ¹H, ¹⁹F, and ¹³C NMR spectroscopy and X-ray analysis. It was found that these compounds in the crystalline state and in solutions in acetone-d ₆, DMSO-d ₆, and CDCl₃ exist as Z isomers with the ester fragment involved in intramolecular hydrogen bond with the hydrazone NH proton. Exceptions are alkyl 2-arylhydrazono-4,4-difluoro-3-oxobutanoates which exist in acetone-d ₆ as mixtures of Z and E isomers, the former prevailing. Unlike fluorinated analogs, ethyl 2-(4-methylphenyl)hydrazono-3-oxobutanoate in crystal has the structure of E isomer in which intramolecular hydrogen bond is formed between the NH proton and acetyl carbonyl group. The same compound in acetone-d ₆, DMSO-d ₆, and CDCl₃ gives rise to a mixture of Z and E isomers, the latter prevailing.     

High-temperature heat capacity and thermodynamic properties of pyrovanadate Pb<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> and orthovanadate Pb<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The heat capacities of Pb₂V₂O₇ and Pb₃(VO₄)₂ as a function of temperature in the range 350–965 K have been studied by the differential scanning calorimetry method. The C_P = f(T) curve for Pb₂V₂O₇ is described by the equation C_p = (230.76 ± 0.51) + (73.60 ± 0.50)×10^-3T ? (18.38 ± 0.54)×10⁵T^-2 in the entire temperature range. For Pb₃(VO₄)₂, there is a well-pronounced extreme point in the C_P = f(T) curve at T = 371.5 K, which is caused by the existence of a structural phase transition. The thermodynamic properties of the oxide compounds have been calculated.     

Synthesis and X-ray investigation of Rb<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>] and Cs<Subscript>2</Subscript>[Pd(NO<Subscript>3</Subscript>)<Subscript>4</Subscript>]

Powder and single crystal X-ray diffraction studies have been performed for anhydrous nitrate complexes Rb₂[Pd(NO₃)₄] (I) and Cs₂[Pd(NO₃)₄] (II). Crystal data for I: a = 7.843(1) Å, b = 7.970(1) Å, c = 9.725(1) Å; β = 100.39(1)°, V = 597.9(1) Å ³, space group P2₁/c, Z = 2, d _calc = 2.918 g/cm³; for II: a = 10.309(2) Å, b = 10.426(2) Å, c = 11.839(2) Å; β = 108.17(3)°, V = 1209.0(4) ų, space group P2₁/c, Z = 4, d ^calc = 3.408 g/cm³. The structures are formed by isolated [Pd(NO₃)₄]^2? complex anions and alkali metal cations. The plane-square environment of the Pd atom is formed from the oxygen atoms of the monodentate nitrate groups. The geometrical characteristics of the complex anions are analyzed. Compound II has a short contact Pd...Cs 3.252 Å.     

Thermoresponsive behavior of water-salt solutions of a graft copolymer with a main polyimide chain and side poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

The water-salt solutions of the graft copolymer bearing a polyimide main chain and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains (M = 4.7 × 10⁵, the density of grafting with side chains z = 0.44) are studied by static and dynamic light scattering and turbidimetry. The solutions are investigated in a tenfold range of NaCl concentrations (from 0.015 to 0.15 mol/L) at the polymer concentration from 0.002 to 0.015 g/cm³ and pH from 8 to 12. The temperature dependences of the intensity of scattered light, optical transmission, hydrodynamic radius of scattering objects, and their concentrations in solutions are derived. The temperatures of phase separation onset T ₁ and end T ₂ are determined. It is shown that an increase in the salt content in solution leads to reduction in the polymer solubility and in temperatures T ₁ and T ₂. The watersalt solutions retain all the regularities of phase-separation temperature variation observed for aqueous solutions with change in the concentration of solution and pH of a medium: the values of T ₁ and T ₂ increase upon dilution and growth of acidity.     

Vapor pressure and crystal structure of platinum(II) <Emphasis Type="Italic">trans</Emphasis>-bis-(trifluoroketoiminate)

The temperature dependence of the saturated vapor pressure of the trans-Pt(ktf)₂ complex obtained from fluorinated β-ketoimine (CF₃-CO-CH₂-C(NH)-CH₃) was studied by the flow method. The standard thermodynamic parameters ΔH ₀ ^T and ΔS ₀ ^T of sublimation have been determined. Full crystal-chemical study has been performed for the complex. Crystal data for C₁₀H₁₀F₆N₂O₂Pt: a = 5.9790(8) Å, b = 7.373(2) Å, c = 8.5767(2) Å,α = 84.05(2)°, β = 72.43(1)°, γ = 67.14(1)°, V = 332.1(1) ų, Z = 1, d_calc = 2.496 g/cm³, triclinic, space group \(P\bar 1\). The structure is molecular and consists of isolated trans-Pt(ktf)₂ complexes. The Pt atom lies at the symmetry center and has a square planar environment of two oxygen and two nitrogen atoms; the distances Pt-O (1.984 Å) and Pt-N (1.969 Å) are similar within the limits of 2σ; the OPtN bond angle is 93.9°. Molecular packing in crystal is considered based on structural data; van der Waals energy of the crystal lattice of trans-Pt(ktf)₂ was calculated by the atom-atom potential method.     

Spin-lattice relaxations study of water mobility in natural natrolite

The mobility of water molecules in natural natrolite (Na₂Al₂Si₃O₁₀?2H₂O) is investigated by the ¹H NMR method. The spin-lattice relaxation times in the laboratory and rotating frames (T₁ and T_1ρ) are measured as a function of the temperature for a polycrystalline sample. From experimental T₁ data it follows that at T > 286 K the diffusion of water molecules along channels parallel to the c axis is observed. From experimental T_1ρ data it follows that at T > 250 K the diffusion of water molecules in transversal channels of natrolite is also observed. At a low temperature (T < 250 K) the dipolar interaction with paramagnetic impurities (presumably Fe³⁺ ions) becomes significant as a relaxation mechanism of ¹H nuclei.     

Synthesis,structure, physicochemical properties,and solid-phase thermolysis of Co<Subscript>2</Subscript>Sm(Piv)<Subscript>7</Subscript>(2,4-Lut)<Subscript>2</Subscript>

Heterometallic pivalate Co₂Sm(Piv)₇(2,4-Lut)₂ (1) was prepared for the first time and structurally characterized at 293 and 160 K. Antiferromagnetic exchange interactions are dominant in complex 1. This compound experiences a first-order phase transition within 210–260 K. A set of thermodynamic functions was obtained for this complex (C _p , H _T ⁰ - H ₁₈₀ ⁰ , and S _T ⁰ ), and parameters were determined for solid-phase thermolysis where samarium cobaltate SmCoO₃ is the only product.